NXP Semiconductors

PCA9617ADP - Fm+ I2C Level Shifter | NXP Semiconductors

MPN: PCA9617ADP ✓ Aktif
0.8 V to 5.5 V Vdss 8-pin TSSOP Package
MOQ: 1 |

PCA9617ADP Ringkasan

NXP Semiconductors PCA9617ADP is a CMOS level-translating I2C-bus repeater designed for low-voltage 0.8 V to 5.5 V and higher-voltage 2.2 V to 5.5 V domains. It supports Fast-mode Plus (Fm+) I2C-bus and SMBus applications in an 8-pin TSSOP package. The device provides bidirectional buffering for SDA and SCL, allowing buses with different voltage levels to communicate while retaining standard I2C operating modes and features.

A level-translating I2C repeater is an interface IC that converts signal voltage levels between two communication domains and isolates them electrically through buffering. It is used when a low-voltage sensor, microcontroller, or peripheral must communicate with a higher-voltage I2C bus. The PCA9617A family belongs to the broader I2C interface IC and signal-buffer hierarchy, where repeated or extended bus sections require buffering to maintain signal integrity and support longer interconnect distances.

The PCA9617ADP supports low-side and high-side voltage domains from 0.8 V to 5.5 V and 2.2 V to 5.5 V respectively. Its Fm+ support enables operation with I2C-compatible devices that use the higher Fast-mode Plus signaling rate. Bidirectional SDA and SCL buffering allows the device to be inserted directly into an I2C bus segment without changing the bus transaction sequence. The 8-pin TSSOP package supports compact PCB layouts in industrial, consumer, and embedded systems.

The NXP datasheet identifies the PCA9617A as a CMOS integrated circuit for level shifting between low-voltage and higher-voltage I2C or SMBus applications. The buffered design helps prevent low-voltage bus nodes from being exposed to incompatible high-side voltage levels. Because the device is a bus repeater rather than a general-purpose logic buffer, it preserves the electrical behavior expected by bidirectional open-drain I2C signaling and provides a defined interface between voltage domains.

Typical uses include voltage-level adaptation between 1.8 V or 2.5 V microcontrollers and 3.3 V or 5 V peripherals, isolating sensor segments on a shared I2C bus, extending a bus section through a repeater, and supporting mixed-voltage embedded systems. It is particularly useful when the low-side and high-side devices use different supply rails but still require common I2C addressing and pull-up arrangements.

When laying out the circuit, verify that pull-up resistors are connected to the correct supply rail for each voltage domain and that the repeater is placed according to the datasheet's recommended bus topology. Keep the SDA and SCL traces short and route them away from noisy switching nodes. The TSSOP footprint also requires attention to solder-joint inspection because its lead pitch is finer than a conventional SOIC-8 footprint.

This product page combines the NXP product description, datasheet references, packaging information, application guidance, and drop-in candidate analysis to support component selection and PCB implementation. Request a quote for current commercial availability, lead time, and procurement requirements using the Request a Quote form on this page.

Alternatif penggantian untuk PCA9617ADP — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian PCA9617ADP (sama faktor bentuk dan footprint) — berbeda di dalam Package, Number of Channels, Mounting Type, Function, Maximum Operating Frequency.

NXP Semiconductors
Package: 8-TSSOP
Number of Channels: 2
Function: Dual bidirectional I2C-bus buffer / repeater
Bandingkan dengan PCA9617ADP →
NXP Semiconductors
Package: TSSOP-10 (DP)
Number of Channels: 2 (SCL and SDA)
Function: 2-channel multipoint Fast-mode Plus differential I2C-bus buffer
Bandingkan dengan PCA9617ADP →
NXP Semiconductors
Mounting Type: Daughter card / expansion board
Bandingkan dengan PCA9617ADP →
NXP Semiconductors
Package: 8-pin TSSOP
Mounting Type: Surface mount
Bandingkan dengan PCA9617ADP →

PCA9617ADPJ

✅ Drop-In
NXP Semiconductors
📦 TSSOP-8
Level-translating bidirectional I2C-bus repeater · 0.8 V to 5.5 V · 2.2 V to 5.5 V · 1 MHz · I2C and SMBus · Fast-mode Plus (Fm+) · Bidirectional · 1 channel

Kontak untuk harga

Lihat Datasheet →

PCA9617ADP Spesifikasi

Device Type CMOS level-translating I2C-bus repeater
I2C Mode Support Fast-mode Plus (Fm+) and SMBus
Low-Side Voltage Range 0.8 V to 5.5 V
High-Side Voltage Range 2.2 V to 5.5 V
Bus Signals Bidirectional SDA and SCL
Logic Family CMOS
Number of Channels 2 bidirectional I2C bus signals
Paket 8-pin TSSOP
Tipe Mounting Surface mount

PCA9617ADP 8-pin tssop Diamant Konfigurasi Panduan

Konfigurasi pin untuk PCA9617ADP (8-pin tssop pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 8-pin tssop untuk PCA9617ADP

Tidak ada data diatribut pin yang tersedia untuk PCA9617ADP.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

PCA9617ADP cocok untuk 6 aplikasis: Mixed-Voltage Microcontroller Interfaces, Low-Voltage Sensor Bus Isolation, Industrial I2C Segment Extension, Consumer Embedded Peripherals, Fast-Mode Plus Bus Interfacing, Level-Shifted Communication Ports.

🧩

Mixed-Voltage Microcontroller Interfaces

The PCA9617ADP fits a boundary between low-voltage digital logic and higher-voltage I2C peripherals because it translates low-side signals across 0.8 V to 5.5 V and high-side signals across 2.2 V to 5.5 V. Place it between the controller's SDA and SCL pins and the external bus, with pull-up resistors connected to the appropriate rail on each side. Bidirectional buffering allows the controller to retain I2C read and write transactions while the two domains use different logic levels.

🧩

Low-Voltage Sensor Bus Isolation

The PCA9617ADP can isolate a group of 0.8 V to 5.5 V sensors from a 2.2 V to 5.5 V system bus. Its buffered SDA and SCL paths keep the two voltage domains separated while preserving bidirectional communication needed for sensor addressing and register access. Select pull-up values for each rail and confirm that the sensor's thresholds and the controller's high-level voltage remain within the translated ranges before releasing the design.

🏭

Industrial I2C Segment Extension

The PCA9617ADP is useful when an industrial controller must connect to an I2C segment operating at a higher voltage than its local logic. The level translator supports Fast-mode Plus I2C and SMBus applications while buffering both SDA and SCL signals in the 8-pin TSSOP package. Place the repeater at the voltage-domain boundary and verify the pull-up rails, maximum bus capacitance, timing margin, and grounding arrangement for the complete segment.

📱

Consumer Embedded Peripherals

The PCA9617ADP supports compact consumer embedded designs where a low-voltage controller communicates with higher-voltage EEPROMs, sensors, or display peripherals over I2C. Its bidirectional level translation avoids forcing the controller I/O pins to tolerate the higher-side voltage. The TSSOP-8 footprint conserves board area, although the design must provide correct pull-ups on each side and account for the shorter lead pitch during soldering and inspection.

🌐

Fast-Mode Plus Bus Interfacing

The PCA9617ADP fits Fm+ I2C interfaces that require voltage translation between two domains while retaining high-speed bidirectional bus behavior. The NXP PCA9617A datasheet identifies Fast-mode Plus and SMBus support as key applications. Engineers should review the timing characteristics, bus-capacitance limits, pull-up resistance, and trace length using the manufacturer's recommended circuit rather than treating the repeater as a generic logic buffer.

🔧

Level-Shifted Communication Ports

The PCA9617ADP can provide a defined voltage boundary between communication ports whose SDA and SCL logic levels differ. Bidirectional buffering supports both controller-driven commands and slave-returned data without unidirectional direction control. The design should use separate pull-up networks for the low and high sides, maintain common ground, and keep sensitive translator pins away from high-current switching paths to avoid introducing bus errors through supply or signal disturbance.

What is the PCA9617ADP?
The PCA9617ADP is an NXP Semiconductors CMOS level-translating I2C-bus repeater for low-voltage and higher-voltage domains. According to the NXP PCA9617A datasheet, it translates low-side signals from 0.8 V to 5.5 V and high-side signals from 2.2 V to 5.5 V while supporting Fast-mode Plus I2C-bus and SMBus applications. It buffers both SDA and SCL bidirectionally in an 8-pin TSSOP package.
What voltage ranges does the PCA9617ADP support?
The PCA9617ADP supports a low-side voltage range of 0.8 V to 5.5 V and a high-side voltage range of 2.2 V to 5.5 V. These ranges come from the NXP PCA9617A datasheet and allow two I2C domains with different logic levels to operate together. The low-side supply and high-side supply rails should be selected so that both remain within their specified limits and match the attached devices.
Can the PCA9617ADP be used with Fast-mode Plus I2C?
Yes, the PCA9617ADP supports Fast-mode Plus I2C-bus operation as well as SMBus applications. The NXP product description identifies the PCA9617A as a level translator for Fm+ I2C and SMBus systems. Its bidirectional SDA and SCL buffering preserves bus operation across the two voltage domains, while the application still requires correct pull-up resistors on each side of the repeater.
Where can I download the PCA9617ADP datasheet PDF?
The official NXP PCA9617A datasheet PDF is available at the NXP document link for this component family. It defines the device as a CMOS integrated circuit providing level shifting between 0.8 V to 5.5 V and 2.2 V to 5.5 V voltage domains. Use the manufacturer datasheet for the authoritative pin description, electrical characteristics, application diagram, and timing information.
Where is the PCA9617ADP pinout?
The PCA9617ADP uses an 8-pin TSSOP package, and its pin assignments are documented in the pin-description section of the NXP PCA9617A datasheet. The NXP datasheet is the correct location for confirming SDA, SCL, supply, ground, and enable connections before layout. A complete pin list should be transcribed directly from that table rather than inferred from another package or bus translator.
Where can I buy the PCA9617ADP online?
The PCA9617ADP can be requested through the Request a Quote form on this page. Current channel availability, quantity, and lead time should be confirmed there because commercial conditions can change. The component is an active NXP product, and the manufacturer product page provides the primary technical and lifecycle reference for the PCA9617ADP.
What is the price of the PCA9617ADP?
The current PCA9617ADP price is shown through the Request a Quote workflow on this page rather than as a static figure. Use that form to request the quantity and commercial terms needed for your bill of materials. Price and lead time depend on order quantity, sourcing channel, and current supply conditions.
What is the lead time for the PCA9617ADP?
The current lead time for the PCA9617ADP should be confirmed through the Request a Quote form on this page. The NXP product page lists the device as active, but production and distribution timing can vary by quantity and date. Provide your requested quantity and target date on the quote request so procurement can return an appropriate schedule.
Is the PCA9617ADP in stock?
The PCA9617ADP is an active NXP product, and current stock should be checked through the Request a Quote form on this page. The form captures the required quantity and sourcing conditions for an availability response. Do not rely on a historical listing count because inventory levels can change independently of the component's lifecycle status.
What is the best drop-in replacement for the PCA9617ADP?
The PCA9617ADPJ is the closest documented drop-in candidate for the PCA9617ADP because both are NXP 8-pin TSSOP bus-buffer devices listed for the PCA9617A family. The replacement decision should still confirm exact pin assignments, electrical limits, temperature grade, and supply requirements against the NXP datasheet. Only one directly documented same-package candidate was identified in the available cross-reference information.
Can PCA9617ADPJ replace PCA9617ADP?
The PCA9617ADPJ can be considered as a same-package drop-in candidate for the PCA9617ADP because both are 8-pin TSSOP devices associated with the PCA9617A family. However, the manufacturer datasheet should be checked for any ordering-code, temperature, or marking differences before production release. A compatible package alone does not replace the need for a complete electrical and pin-level review.
What can replace the PCA9617ADP?
The PCA9617ADPJ is the principal documented replacement candidate for the PCA9617ADP because it retains the NXP PCA9617A function and 8-pin TSSOP format. Other I2C repeaters should only be considered after their voltage ranges, pinout, enable behavior, and propagation delay are compared with the PCA9617A datasheet. PCB redesign is not assumed for this same-package candidate.
Is PCA9617ADP the same as PCA9617ADPJ?
The PCA9617ADP and PCA9617ADPJ are closely related NXP 8-pin TSSOP versions of the PCA9617A level-translating I2C-bus repeater. Their shared device family and package make PCA9617ADPJ a strong drop-in candidate, but the ordering codes should still be checked for temperature grade, device revision, and marking differences. The NXP datasheet and product documentation control the final equivalence decision.
When should I choose the PCA9617ADP instead of another I2C repeater?
Choose the PCA9617ADP when a compact 8-pin TSSOP solution is needed to translate I2C signals between a 0.8 V to 5.5 V domain and a 2.2 V to 5.5 V domain while retaining Fm+ operation. It is particularly appropriate for mixed-voltage embedded buses that need bidirectional SDA and SCL buffering. Confirm pull-up placement, logic thresholds, enable requirements, and timing before selecting it over a functionally similar repeater.
Is the PCA9617ADP suitable for mixed-voltage sensor buses?
Yes, the PCA9617ADP is suitable for mixed-voltage sensor buses because it translates low-side levels from 0.8 V to 5.5 V to high-side levels from 2.2 V to 5.5 V. Its bidirectional SDA and SCL channels allow sensors and a controller to communicate across separated voltage domains. Use suitable pull-ups on both bus sections and verify that each attached device remains within the translated voltage range.
What are the key specifications of the PCA9617ADP?
The PCA9617ADP is an 8-pin TSSOP CMOS level translator with 0.8 V to 5.5 V low-side and 2.2 V to 5.5 V high-side voltage ranges. Its main features are bidirectional buffering for SDA and SCL, support for Fast-mode Plus I2C and SMBus applications, and separation of two bus voltage domains. These electrical and interface functions are stated in the NXP PCA9617A datasheet.

Data referensi engineering untuk PCA9617ADP — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the PCA9617ADP when the design needs a compact NXP level translator between a 0.8 V to 5.5 V I2C domain and a 2.2 V to 5.5 V domain. It is well matched to mixed-voltage sensors, embedded peripherals, and Fm+ or SMBus bus sections that require bidirectional SDA and SCL buffering. The PCA9617ADPJ is the closest same-package alternative when procurement or lifecycle planning requires another ordering code, but its temperature grade, marking, and revision should be checked against the NXP documentation. Other I2C repeaters should be selected only when their voltage thresholds, timing, enable behavior, and exact pin assignments satisfy the system requirements. Confirm the NXP application circuit, pull-up placement, package drawing, and bus timing before releasing the PCB.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini PCA9617ADPJ
Package TSSOP-8 TSSOP-8 - same
Brand NXP Semiconductors NXP Semiconductors
Device Function Level-translating I2C-bus repeater Level-translating I2C-bus repeater
Low-Side Voltage Range 0.8 V to 5.5 V 0.8 V to 5.5 V
High-Side Voltage Range 2.2 V to 5.5 V 2.2 V to 5.5 V
I2C Support Fast-mode Plus and SMBus Fast-mode Plus and SMBus
Buffered Signals Bidirectional SDA and SCL Bidirectional SDA and SCL
Logic Technology CMOS CMOS
Lifecycle Status Active Active

Diferensiator Kunci

  • Direct same-package sourcing path (vsPCA9617ADPJ)
  • Fm+ and SMBus support (vsPCA9617ADPJ)
  • Bidirectional two-signal buffering (vsPCA9617ADPJ)

Catatan Desain

Place the PCA9617ADP directly at the boundary between the two I2C voltage domains. Keep SDA and SCL routing short and continuous, connect each pull-up resistor to the supply associated with its own bus side, and provide a common ground between the translator and attached devices. Avoid routing the high-voltage-side traces beneath the low-voltage-side circuitry where switching currents could couple into the sensitive bus nodes.

Do not treat PCA9617ADP as a one-way logic-buffer pair. Both SDA and SCL paths are bidirectional, and pull-up networks must exist on the correct side of the repeater for the I2C open-drain signaling to operate properly. Check the NXP datasheet for enable requirements and pin assignments before finalizing the schematic, especially when a bus section may be disconnected or held in a reset state.

Use the manufacturer-recommended TSSOP-8 footprint and account for its fine lead pitch during paste printing, reflow profiling, and post-reflow inspection. Maintain adequate solder mask dam spacing and avoid accidental solder bridges between adjacent SDA, SCL, supply, and ground pins. Confirm land geometry against the latest NXP package drawing rather than scaling a generic TSSOP footprint.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The NXP product page and datasheet identify the PCA9617ADP as an active component, but no explicit compliance declarations are included in the listed product information. AEC-Q100 is not applicable to this general-purpose interface IC.

Data disahkan pada: 2026-11-10 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

PCA9617ADP datasheet PCA9617ADP datasheet pdf PCA9617ADP pinout PCA9617ADP equivalent PCA9617ADP replacement PCA9617ADP cross reference PCA9617ADP vs PCA9617ADPJ PCA9617ADP price PCA9617ADP stock PCA9617ADP ard NXP PCA9617ADP PCA9617ADP TSSOP-8 pinout PCA9617ADP I2C level shifter

Komponen dan Istilah Terkait

NXP Semiconductors PCA9617ADP PCA9617A PCA9617ADPJ PCA9617ADP-ARD level-translating I2C-bus repeater I2C interface IC signal buffer bus repeater CMOS Fast-mode Plus Fm+ SMBus SDA SCL bidirectional buffering TSSOP-8 TSSOP package family surface mount SMD mixed-voltage I2C bus sensor bus bidirectional level translator voltage-domain interface RoHS REACH
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ