PCM1770PWR - 24-Bit Stereo DAC with Headphone Amp | Texas Instruments
MPN: PCM1770PWR ✓ AktifPCM1770PWR Ringkasan
A digital-to-analog converter, or DAC, is an integrated circuit that converts digital audio samples into continuous analog voltage signals. In the broader signal-chain hierarchy, a stereo DAC belongs to the ADC/DAC class of interface and data-conversion ICs. A DAC is commonly positioned between a digital audio source, such as a USB audio interface or digital audio processor, and an analog output stage, where it supports headphones, powered speakers, line inputs, or audio analog-to-digital converters.
The PCM1770's 24-bit resolution supports high-fidelity audio formats, while its 50 kHz sampling capability covers standard digital-audio rates used in compact consumer and communication equipment. Its integrated headphone circuitry reduces the need for a separate output amplifier in space-constrained designs. The software-control capability provides a selectable operating interface, and the 98 dB signal-to-noise ratio is a key measure of the converter's ability to preserve low-level audio information without excessive output noise.
The PCM1770 is a CMOS monolithic integrated circuit combining stereo digital-to-analog converters, headphone circuitry, and support functions. TI describes its converter implementation as an enhanced multilevel architecture using noise shaping and multilevel amplitude quantization. These techniques improve dynamic performance while supporting low-voltage, low-power operation in a compact surface-mount package.
Typical uses include portable headphone audio, digital-audio-player analog outputs, multimedia terminal analog sections, and compact communication equipment. In these systems, the converter can accept digital audio from a host processor and produce stereo analog signals for headphone or line-level output stages. The integrated headphone amplifier is especially useful where component count, board area, and power consumption are constrained.
When designing around PCM1770PWR, preserve adequate layout separation between digital and analog signals, place required bypass capacitors close to their supply pins, and route headphone outputs away from sensitive input and control traces. Confirm that the external output network and load match the headphone-amplifier requirements in the manufacturer datasheet before finalizing the analog output stage.
This product record combines the manufacturer specifications, interface details, package information, application guidance, and verified sourcing links for PCM1770PWR. It also provides practical PCB and signal-integrity considerations that help engineers move from component selection to a production-ready stereo audio design.
Alternatif penggantian untuk PCM1770PWR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PCM1770PWR (sama faktor bentuk dan footprint) — berbeda di dalam Converter Architecture.
PCM1771PWR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PCM1770PWRG4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PCM1771PWRG4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PCM1772PWR
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PCM1770PWR Rating Maksimal & Karakteristik Listrik
| Converter Type | Stereo digital-to-analog converter |
| Resolusi | 24 bit |
| Maximum Sampling Rate | 50 kHz |
| Signal-to-Noise Ratio | 98 dB |
| Digital Audio Interface | I2S |
| Output Architecture | Stereo |
| Headphone Amplifier | Integrated |
| Control Interface | Software control |
| Process Technology | CMOS |
| Converter Architecture | Enhanced multilevel architecture |
| Noise-Shaping | Supported |
| Amplitude Quantization | Multilevel |
| Paket | 16-pin TSSOP (PW) |
| Tipe Mounting | Surface mount |
PCM1770PWR 16-pin tssop (pw) Diamant Konfigurasi Panduan
Konfigurasi pin untuk PCM1770PWR (16-pin tssop (pw) pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk PCM1770PWR.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
PCM1770PWR cocok untuk 6 aplikasis: Portable Headphone Audio, Digital Audio Player, Multimedia Terminal Analog Output, Line-Level Audio Interface, Communication and Voice Terminal, Compact Audio Evaluation Board.
Portable Headphone Audio
PCM1770PWR fits portable headphone systems that require 24-bit stereo conversion without a separate headphone-output amplifier. Its integrated headphone circuitry reduces the analog output component count, while the 16-pin TSSOP package supports compact surface-mount layouts. The converter accepts an I2S digital stream at rates up to 50 kHz and provides 98 dB SNR for audio products such as portable media players and personal audio devices. Confirm the headphone load impedance, recommended output network, and available supply voltage in the manufacturer datasheet before finalizing the output stage.
Direkomendasikan
Digital Audio Player
PCM1770PWR can form the analog-output stage of a digital audio player by accepting 24-bit stereo I2S samples and converting them with an integrated headphone amplifier. Its 50 kHz maximum sampling rate covers conventional audio sources, while the 98 dB SNR specification supports low-noise playback paths. Use separate digital and analog layout regions, place bypass capacitors close to the IC, and verify the master-clock and serial-data timing against the host processor. This configuration is useful where a simple, compact player architecture is preferred over a multi-chip output chain.
Direkomendasikan
Multimedia Terminal Analog Output
PCM1770PWR is suitable for the stereo analog section of multimedia terminals, communication equipment, and compact control panels that require digital-to-analog conversion with a headphone output. The 24-bit converter and I2S interface connect cleanly to a digital audio host, while the integrated headphone amplifier reduces external circuitry. Its 16-pin TSSOP package is appropriate for space-constrained surface-mount assemblies. Maintain separation from clocks, switching regulators, and display interfaces to minimize digital coupling into the analog output, and use the manufacturer's recommended reference layout as the PCB baseline.
Direkomendasikan
Line-Level Audio Interface
PCM1770PWR can serve as the digital-to-analog element of a line-level audio interface when the required output level and loading are compatible with its headphone-amplifier stage. The 24-bit conversion and 98 dB SNR provide a strong basis for preserving source quality, while the I2S interface simplifies connection to digital-audio processors. Use the manufacturer datasheet to determine whether the headphone output can drive the intended line input directly or whether an additional buffer is required. Proper grounding and short analog traces are essential for avoiding channel imbalance and noise.
Direkomendasikan
Communication and Voice Terminal
PCM1770PWR can be used in communication terminals that reproduce digitally sourced audio cues, prompts, or call audio through headphones. The 50 kHz sampling capability is suitable for standard-rate voice and audio playback, and software control allows operating conditions to be coordinated with the system controller. Its integrated headphone amplifier lowers system complexity compared with a DAC followed by a discrete headphone driver. Validate acoustic output, idle behavior, and electromagnetic compatibility in the final enclosure, particularly when switching regulators and digital interfaces are located near the analog section.
Direkomendasikan
Compact Audio Evaluation Board
PCM1770PWR is well suited to compact audio evaluation boards because it combines stereo DAC conversion, I2S reception, and headphone drive in one 16-pin TSSOP device. Engineers can evaluate digital playback using a host processor while measuring the converter's 98 dB SNR and observing analog output behavior. The limited package size supports small test fixtures, but evaluation still requires correct bypassing, controlled clocking, and a defined output load. Use the PCM1770 datasheet reference circuit as the starting point and adjust the measurement setup for the intended sample rate and headphone impedance.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PCM1770PWR — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini |
|---|---|
| Package | 16-pin TSSOP (PW) |
| Brand | Texas Instruments |
| Converter Type | Stereo DAC with integrated headphone amplifier |
| Resolution | 24 bit |
| Maximum Sampling Rate | 50 kHz |
| Signal-to-Noise Ratio | 98 dB |
| Digital Interface | I2S |
| Control Method | Software control |
Diferensiator Kunci
- Integration of stereo DAC and headphone output circuitry (vsGeneric discrete DAC-plus-output-amplifier architecture)
- Direct 24-bit I2S audio path (vsLower-resolution or parallel-interface stereo DAC concept)
- Compact surface-mount integration (vsLarger-package converter with a separate headphone amplifier)
Catatan Desain
Start the PCB layout with the manufacturer reference circuit and keep the I2S data, clock, and control routes away from the headphone-output traces. Place the required bypass capacitors directly beside their associated supply and ground pins, and use the shortest practical path between the converter and analog output network. Separating digital and analog regions reduces switching transients and ground-current coupling into the audio output.
Treat the digital interface as a timing-sensitive subsystem even at the device's 50 kHz maximum audio sampling rate. Confirm master-clock polarity, data valid timing, bit alignment, and software-control timing from the manufacturer datasheet. Avoid adding long test pads or branch routes to clock and serial-data nets, and use a controlled-impedance layout when the host processor and PCM1770PWR are separated by more than a short board distance.
Do not treat a functionally similar stereo DAC as a drop-in replacement without verifying all 16 TSSOP connections, supply levels, I2S timing, software-control commands, and headphone-output loading. Use the pin-description table in the manufacturer datasheet when assigning nets. Also verify the exact PCM1770PWR ordering configuration before manufacturing, particularly reel orientation and any lead-free or marking requirements specified by the manufacturer.
Budget the analog and digital supply currents at the actual operating mode, headphone impedance, and output level rather than relying only on a headline low-power description. Place local high-frequency bypass capacitance at the supply pins and provide stable return paths to the ground references shown in the manufacturer layout. If the headphone output operates continuously at high level, account for the resulting dissipation in the enclosure and copper-area design.
Informasi Konformitas
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated in the accessible manufacturer and distributor information for PCM1770PWR. AEC-Q100 is not applicable because the product is an audio converter rather than an automotive-qualified device.