Texas Instruments

PCM1770PWR - 24-Bit Stereo DAC with Headphone Amp | Texas Instruments

부품 번호: PCM1770PWR ✓ 활성
16-pin TSSOP (PW) Package
MOQ: 1 |

PCM1770PWR 개요

Texas Instruments PCM1770PWR is a 24-bit, low-power stereo digital-to-analog converter with an integrated headphone amplifier, supporting audio sampling rates up to 50 kHz through an I2S-compatible interface. The device is offered in a 16-pin TSSOP package and is designed for compact audio systems requiring a low-noise stereo conversion path and direct headphone drive. It provides 98 dB SNR and software-controlled operation.

A digital-to-analog converter, or DAC, is an integrated circuit that converts digital audio samples into continuous analog voltage signals. In the broader signal-chain hierarchy, a stereo DAC belongs to the ADC/DAC class of interface and data-conversion ICs. A DAC is commonly positioned between a digital audio source, such as a USB audio interface or digital audio processor, and an analog output stage, where it supports headphones, powered speakers, line inputs, or audio analog-to-digital converters.

The PCM1770's 24-bit resolution supports high-fidelity audio formats, while its 50 kHz sampling capability covers standard digital-audio rates used in compact consumer and communication equipment. Its integrated headphone circuitry reduces the need for a separate output amplifier in space-constrained designs. The software-control capability provides a selectable operating interface, and the 98 dB signal-to-noise ratio is a key measure of the converter's ability to preserve low-level audio information without excessive output noise.

The PCM1770 is a CMOS monolithic integrated circuit combining stereo digital-to-analog converters, headphone circuitry, and support functions. TI describes its converter implementation as an enhanced multilevel architecture using noise shaping and multilevel amplitude quantization. These techniques improve dynamic performance while supporting low-voltage, low-power operation in a compact surface-mount package.

Typical uses include portable headphone audio, digital-audio-player analog outputs, multimedia terminal analog sections, and compact communication equipment. In these systems, the converter can accept digital audio from a host processor and produce stereo analog signals for headphone or line-level output stages. The integrated headphone amplifier is especially useful where component count, board area, and power consumption are constrained.

When designing around PCM1770PWR, preserve adequate layout separation between digital and analog signals, place required bypass capacitors close to their supply pins, and route headphone outputs away from sensitive input and control traces. Confirm that the external output network and load match the headphone-amplifier requirements in the manufacturer datasheet before finalizing the analog output stage.

This product record combines the manufacturer specifications, interface details, package information, application guidance, and verified sourcing links for PCM1770PWR. It also provides practical PCB and signal-integrity considerations that help engineers move from component selection to a production-ready stereo audio design.

드롭인 대체품: PCM1770PWR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: PCM1770PWR (동일 폼 팩터 및 풋프린트) — 차이점: Converter Architecture.

Texas Instruments
Converter Architecture: Enhanced multilevel delta-sigma architecture
비교 대상: PCM1770PWR →

PCM1771PWR

✅ 드롭인
📦 TSSOP-16 (PW)
same 24-bit stereo architecture and TSSOP-16 footprint, but serial data format is left-justified instead of right-justified I2S; all other ratings identical (0% change in resolution, channels, SNR and sampling rate)

📋 참조 대체품 (카탈로그에 없음)

PCM1770PWRG4

✅ 드롭인
📦 TSSOP-16 (PW)
identical die and electrical ratings in the same TSSOP-16 package, differing only as the green/lead-free environmental ordering variant (0% parameter difference)

📋 참조 대체품 (카탈로그에 없음)

PCM1771PWRG4

✅ 드롭인
📦 TSSOP-16 (PW)
left-justified data format like the PCM1771PWR, and green/lead-free ordering; resolution, channels, SNR and sampling rate unchanged (0% parameter difference)

📋 참조 대체품 (카탈로그에 없음)

PCM1772PWR

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 TSSOP-16 (PW)
Stereo audio digital-to-analog converter (DAC) · 24 bit · 50 kHz · I2S-compatible serial interface · 3-wire serial · Stereo voltage output · 98 dB · Integrated line-out amplifier

가격 문의

데이터시트 보기 →

PCM1770PWR 최대 정격 & 전기적 특성

Converter Type Stereo digital-to-analog converter
분해능 24 bit
Maximum Sampling Rate 50 kHz
Signal-to-Noise Ratio 98 dB
Digital Audio Interface I2S
Output Architecture Stereo
Headphone Amplifier Integrated
Control Interface Software control
Process Technology CMOS
Converter Architecture Enhanced multilevel architecture
Noise-Shaping Supported
Amplitude Quantization Multilevel
패키지 16-pin TSSOP (PW)
실장 유형 Surface mount

PCM1770PWR 16-pin tssop (pw) 핀 구성 가이드

PCM1770PWR(16-pin tssop (pw) 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

PCM1770PWR의 16-pin tssop (pw) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: PCM1770PWR.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

PCM1770PWR 적합 용도: 6 애플리케이션s: Portable Headphone Audio, Digital Audio Player, Multimedia Terminal Analog Output, Line-Level Audio Interface, Communication and Voice Terminal, Compact Audio Evaluation Board.

📱

Portable Headphone Audio

PCM1770PWR fits portable headphone systems that require 24-bit stereo conversion without a separate headphone-output amplifier. Its integrated headphone circuitry reduces the analog output component count, while the 16-pin TSSOP package supports compact surface-mount layouts. The converter accepts an I2S digital stream at rates up to 50 kHz and provides 98 dB SNR for audio products such as portable media players and personal audio devices. Confirm the headphone load impedance, recommended output network, and available supply voltage in the manufacturer datasheet before finalizing the output stage.

🎧

Digital Audio Player

PCM1770PWR can form the analog-output stage of a digital audio player by accepting 24-bit stereo I2S samples and converting them with an integrated headphone amplifier. Its 50 kHz maximum sampling rate covers conventional audio sources, while the 98 dB SNR specification supports low-noise playback paths. Use separate digital and analog layout regions, place bypass capacitors close to the IC, and verify the master-clock and serial-data timing against the host processor. This configuration is useful where a simple, compact player architecture is preferred over a multi-chip output chain.

🖥️

Multimedia Terminal Analog Output

PCM1770PWR is suitable for the stereo analog section of multimedia terminals, communication equipment, and compact control panels that require digital-to-analog conversion with a headphone output. The 24-bit converter and I2S interface connect cleanly to a digital audio host, while the integrated headphone amplifier reduces external circuitry. Its 16-pin TSSOP package is appropriate for space-constrained surface-mount assemblies. Maintain separation from clocks, switching regulators, and display interfaces to minimize digital coupling into the analog output, and use the manufacturer's recommended reference layout as the PCB baseline.

🌐

Line-Level Audio Interface

PCM1770PWR can serve as the digital-to-analog element of a line-level audio interface when the required output level and loading are compatible with its headphone-amplifier stage. The 24-bit conversion and 98 dB SNR provide a strong basis for preserving source quality, while the I2S interface simplifies connection to digital-audio processors. Use the manufacturer datasheet to determine whether the headphone output can drive the intended line input directly or whether an additional buffer is required. Proper grounding and short analog traces are essential for avoiding channel imbalance and noise.

📡

Communication and Voice Terminal

PCM1770PWR can be used in communication terminals that reproduce digitally sourced audio cues, prompts, or call audio through headphones. The 50 kHz sampling capability is suitable for standard-rate voice and audio playback, and software control allows operating conditions to be coordinated with the system controller. Its integrated headphone amplifier lowers system complexity compared with a DAC followed by a discrete headphone driver. Validate acoustic output, idle behavior, and electromagnetic compatibility in the final enclosure, particularly when switching regulators and digital interfaces are located near the analog section.

🔧

Compact Audio Evaluation Board

PCM1770PWR is well suited to compact audio evaluation boards because it combines stereo DAC conversion, I2S reception, and headphone drive in one 16-pin TSSOP device. Engineers can evaluate digital playback using a host processor while measuring the converter's 98 dB SNR and observing analog output behavior. The limited package size supports small test fixtures, but evaluation still requires correct bypassing, controlled clocking, and a defined output load. Use the PCM1770 datasheet reference circuit as the starting point and adjust the measurement setup for the intended sample rate and headphone impedance.

What is the PCM1770PWR?
The PCM1770PWR is a Texas Instruments 24-bit stereo audio DAC with an integrated headphone amplifier and I2S digital audio interface. According to the Texas Instruments PCM1770 product page, the device supports sampling rates up to 50 kHz, provides 98 dB SNR, and uses software control. It is packaged in a 16-pin TSSOP package for compact, surface-mount audio equipment.
What are the key specifications of PCM1770PWR that engineers should know?
PCM1770PWR combines a 24-bit stereo DAC, a sampling rate up to 50 kHz, 98 dB SNR, an I2S interface, software control, and an integrated headphone amplifier in a 16-pin TSSOP package. TI describes the device as a CMOS monolithic IC using an enhanced multilevel architecture with noise shaping and multilevel amplitude quantization. These features position it for low-voltage, low-power audio designs.
What is the output voltage range of PCM1770PWR?
The PCM1770PWR analog output voltage range is not stated in the manufacturer product information available for this record. Use the PCM1770 manufacturer datasheet for the analog output characteristics, full-scale output voltage, and recommended output-loading conditions. Those limits are needed when selecting external coupling, attenuation, or line-driver components after the headphone amplifier.
Does PCM1770PWR support I2S digital audio?
Yes, PCM1770PWR supports an I2S digital audio interface and accepts 24-bit stereo audio data. The manufacturer identifies a maximum sampling rate of 50 kHz for the device. Digital-audio hosts must still match the converter's required clocking, serial-data timing, word-length settings, and control protocol from the manufacturer datasheet.
Where can I download the PCM1770PWR datasheet?
The official PCM1770PWR technical documents are available from the Texas Instruments PCM1770 product page at https://www.ti.com/product/PCM1770. Select the PCM1770PWR ordering entry to access its 16-pin TSSOP package information and manufacturer documentation. Use the datasheet's pin-description and application sections to assign PCB nets and select the required external components.
Where can I find the PCM1770PWR pinout?
The PCM1770PWR uses a 16-pin TSSOP package, but a pin-number-to-signal mapping is not published in the accessible product-page excerpts for this record. Use the pin-description table in the Texas Instruments PCM1770 datasheet when assigning PCB tracks. Do not infer the pinout from the package drawing alone because the exposed functions include digital audio, control, supply, ground, and analog headphone connections.
Is PCM1770PWR suitable for headphone applications?
Yes, PCM1770PWR includes an integrated headphone amplifier and is specifically described as a low-power stereo DAC with headphone-amplifier circuitry. It is suitable for compact headphone outputs where a discrete output amplifier would add board area and component count. Confirm the required load impedance, output level, and external network against the manufacturer datasheet before connecting headphones.
What can replace PCM1770PWR?
A valid replacement for PCM1770PWR must provide the same 16-pin TSSOP footprint, pin-to-pin signal compatibility, compatible I2S timing, 24-bit resolution, and comparable stereo headphone-output behavior. No substitute in the retrieved cross-reference results met all of these conditions. Treat functionally similar stereo DACs as redesign candidates until package, pin mapping, control protocol, supply voltage, and output loading have been verified.
Is PCM1770PWR the same as PCM1771PWR?
PCM1770PWR and PCM1771PWR are members of the same TI PCM177x family, but they cannot be treated as interchangeable without checking their control interfaces and complete pin assignments. The family documentation notes that PCM1770 and PCM1771 devices include stereo DACs, headphone circuitry, and support circuitry, while PCM1770PWR specifically uses software control. Verify the control protocol and every package connection before substitution.
When should I choose PCM1770PWR over another stereo DAC?
Choose PCM1770PWR when the design needs 24-bit stereo conversion, an I2S interface, sampling rates up to 50 kHz, 98 dB SNR, software control, and an integrated headphone amplifier in a compact 16-pin TSSOP package. It is particularly suitable for portable or embedded audio products where a discrete headphone-output stage is undesirable. If a project needs higher sampling rates, balanced outputs, or a different digital-control protocol, verify those requirements before choosing a device.
Is PCM1770PWR suitable for a portable audio product?
PCM1770PWR is suitable for many portable and low-power audio products because TI identifies it as a low-voltage, low-power stereo DAC with integrated headphone circuitry. Its 24-bit conversion, 50 kHz maximum sampling rate, and 98 dB SNR support compact digital-audio systems. The final power budget still depends on supply voltage, headphone load, output level, and the selected operating mode.
What power and thermal considerations apply to PCM1770PWR?
PCM1770PWR is a low-power CMOS audio converter, but its actual dissipation depends on supply voltage, digital format, output level, headphone load, and control settings. The specific power dissipation and junction-temperature limits are not stated in the accessible product-page excerpts. Use the manufacturer datasheet for supply-current conditions and absolute maximum ratings, and provide the specified layout and thermal copper area in the final PCB design.
What layout practices are important for PCM1770PWR?
Place the required bypass capacitors close to the supply and ground pins, keep analog headphone traces short, and avoid routing digital clock and serial-data signals beneath sensitive analog outputs. Connect analog and digital ground paths according to the manufacturer reference layout rather than creating long shared return paths. These practices reduce ground bounce, switching coupling, and unintended distortion in the stereo output stage.
Is PCM1770PWR currently available for new designs?
The Texas Instruments product page for PCM1770 continues to provide the PCM1770 family product, ordering, and quality information as of November 10, 2026. The PCM1770PWR ordering entry identifies a 16-pin TSSOP version. Confirm current lifecycle status, orderable configurations, and delivery timing with the manufacturer or through the Request a Quote form on this page.
Where can I buy PCM1770PWR and what is its lead time?
Use the Request a Quote form on this page to request PCM1770PWR pricing, stock confirmation, and current lead time for the exact 16-pin TSSOP ordering code. The accessible listing results do not show a complete quantity-break table for this exact MPN, so no fixed price or delivery interval should be assumed. Specify the required quantity, reel format, and destination country with the request.

엔지니어링 참조 데이터: PCM1770PWR — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose PCM1770PWR for compact stereo audio designs that require 24-bit conversion, an I2S interface, sampling rates up to 50 kHz, 98 dB SNR, software control, and an integrated headphone amplifier. Its 16-pin TSSOP package is useful when board area and external component count are priorities. Do not select it solely by resolution when the system requires higher sampling rates, balanced outputs, a different control protocol, or a direct line-output topology. No pin-compatible drop-in alternative was established from the retrieved cross-reference results. Any candidate should therefore be treated as a redesign unless its complete pinout, clocking, control commands, supply requirements, and output loading match PCM1770PWR. This conservative approach prevents software, routing, and analog-performance surprises during production transfer.

대체품과의 비교

파라미터 이 제품
Package 16-pin TSSOP (PW)
Brand Texas Instruments
Converter Type Stereo DAC with integrated headphone amplifier
Resolution 24 bit
Maximum Sampling Rate 50 kHz
Signal-to-Noise Ratio 98 dB
Digital Interface I2S
Control Method Software control

주요 차별점

  • Integration of stereo DAC and headphone output circuitry (vs Generic discrete DAC-plus-output-amplifier architecture)
  • Direct 24-bit I2S audio path (vs Lower-resolution or parallel-interface stereo DAC concept)
  • Compact surface-mount integration (vs Larger-package converter with a separate headphone amplifier)

설계 노트

Start the PCB layout with the manufacturer reference circuit and keep the I2S data, clock, and control routes away from the headphone-output traces. Place the required bypass capacitors directly beside their associated supply and ground pins, and use the shortest practical path between the converter and analog output network. Separating digital and analog regions reduces switching transients and ground-current coupling into the audio output.

Treat the digital interface as a timing-sensitive subsystem even at the device's 50 kHz maximum audio sampling rate. Confirm master-clock polarity, data valid timing, bit alignment, and software-control timing from the manufacturer datasheet. Avoid adding long test pads or branch routes to clock and serial-data nets, and use a controlled-impedance layout when the host processor and PCM1770PWR are separated by more than a short board distance.

Do not treat a functionally similar stereo DAC as a drop-in replacement without verifying all 16 TSSOP connections, supply levels, I2S timing, software-control commands, and headphone-output loading. Use the pin-description table in the manufacturer datasheet when assigning nets. Also verify the exact PCM1770PWR ordering configuration before manufacturing, particularly reel orientation and any lead-free or marking requirements specified by the manufacturer.

Budget the analog and digital supply currents at the actual operating mode, headphone impedance, and output level rather than relying only on a headline low-power description. Place local high-frequency bypass capacitance at the supply pins and provide stable return paths to the ground references shown in the manufacturer layout. If the headphone output operates continuously at high level, account for the resulting dissipation in the enclosure and copper-area design.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated in the accessible manufacturer and distributor information for PCM1770PWR. AEC-Q100 is not applicable because the product is an audio converter rather than an automotive-qualified device.

데이터 검증일: 2026-11-10 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

PCM1770PWR PCM1770PWR datasheet PCM1770PWR datasheet pdf PCM1770PWR pinout PCM1770PWR equivalent PCM1770PWR replacement PCM1770PWR 16 TSSOP PCM1770PWR I2S interface PCM1770PWR headphone amplifier Texas Instruments PCM1770PWR PCM1770 24 bit stereo DAC PCM1770 application circuit

관련 부품 & 용어

Texas Instruments PCM1770PWR PCM1770 PCM1771 24-bit stereo DAC digital-to-analog converter audio DAC ADC/DAC I2S headphone amplifier 98 dB SNR 50 kHz sampling rate software control CMOS enhanced multilevel architecture noise shaping multilevel amplitude quantization 16-pin TSSOP TSSOP package family surface-mount package analog audio digital audio portable audio line-level audio interface
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기