Broadcom

PEX8605-AB50TQIG - 4-Lane PCIe Gen 2 Switch | Broadcom

MPN: PEX8605-AB50TQIG ✓ Aktif
128-pin exposed-pad TQFP, 14 x 14 mm Package
MOQ: 1 |

PEX8605-AB50TQIG Ringkasan

Broadcom PEX8605-AB50TQIG is a PCI Express Gen 2 switch with four lanes, four ports, packet cut-through, and a maximum latency of 250 ns in an x1-to-x1 configuration. The device is manufactured using Renesas 90 nm process technology and is assembled in a lead-free 14 x 14 mm exposed-pad TQFP package with 128 pins.

A PCI Express switch is a semiconductor that connects a PCI Express host or endpoint to multiple downstream devices. It belongs to the interface IC hierarchy, where PCIe fabric switching, lane multiplexing, and packet forwarding reduce the number of system expansion interfaces required by a motherboard or embedded platform. The PEX8605 therefore serves as infrastructure between a root complex and attached PCIe devices.

The switch provides four Gen 2 lanes and four ports, with full line-rate operation on all ports. Its non-blocking internal switch architecture and packet cut-through capability are designed for high-throughput, low-latency systems. Broadcom identifies consumer and embedded applications as suitable low-power operating environments, while the device is also associated with server, storage, networking, and enterprise equipment.

The PEX8605 architecture supports packet cut-through rather than store-and-forward operation, which is the central technical reason for its stated 250 ns maximum latency in x1-to-x1 use. A non-blocking fabric allows traffic associated with multiple ports to progress without a shared internal bottleneck, provided the upstream and downstream links are correctly provisioned and the configuration limits are respected.

Typical deployments include redundant storage paths, multi-port network adapters, embedded systems requiring PCIe expansion, and server platforms that need several PCIe connections behind one host interface. In each case, port configuration, lane width, reference-clock requirements, reset behavior, and thermal performance must be validated against the complete system design.

The principal design consideration is package-aware PCB implementation. The 128-pin exposed-pad TQFP footprint requires careful escape routing, uninterrupted input and output reference planes, and adequate thermal copper beneath the exposed pad. Power sequencing and signal-integrity verification are equally important because simultaneous high-speed traffic can expose return-path and supply-noise problems.

This product overview combines Broadcom architecture details, package and process information, verified commercial availability, and practical integration considerations. It also distinguishes true replacement requirements from superficially similar PEX8605 order codes, helping engineers confirm pin compatibility, package construction, lane configuration, and application suitability before committing a PCB design.

Alternatif penggantian untuk PEX8605-AB50TQIG — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

PEX8605-AB50TQIG Rating Maksimal & Karakteristik Listrik

Product Type PCI Express Gen 2 switch
PCI Express Generation Gen 2
Lane Count 4 lanes
Port Count 4 ports
Maximum Latency 250 ns in x1-to-x1 configuration
Switching Architecture Non-blocking internal switch with packet cut-through
Throughput Architecture Full line rate on all ports
Process Technology Renesas 90 nm
Paket 128-pin exposed-pad TQFP, 14 x 14 mm
Package Construction Lead-free exposed-pad TQFP
Assembly Location ASE Kaohsiung, Taiwan
Low-Power Application Profile Consumer and embedded low-power applications
Status RoHS Compliant
Lead-Free Status Lead-free package construction

PEX8605-AB50TQIG lead-free exposed-pad tqfp Diamant Konfigurasi Panduan

Konfigurasi pin untuk PEX8605-AB50TQIG (lead-free exposed-pad tqfp pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai lead-free exposed-pad tqfp untuk PEX8605-AB50TQIG

Tidak ada data diatribut pin yang tersedia untuk PEX8605-AB50TQIG.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

PEX8605-AB50TQIG cocok untuk 6 aplikasis: Enterprise Storage Expansion, Networking and Multi-Port Adapters, Embedded Platform PCIe Expansion, Server PCIe Consolidation, Low-Latency PCIe Routing, Consumer and Embedded Device Consolidation.

🖥️

Enterprise Storage Expansion

The PEX8605-AB50TQIG is suitable for a storage enclosure that must present several PCIe devices through a compact host interface. Four Gen 2 lanes and four ports provide a defined switching fabric, while the non-blocking architecture and full line-rate port operation help sustain concurrent transfers. Packet cut-through limits the stated maximum latency to 250 ns in an x1-to-x1 configuration, which is useful when a controller must coordinate commands across multiple storage targets. The design should allocate link widths according to traffic demand, keep the exposed thermal pad connected to a low-impedance copper area, and validate storage-controller power states against the switch configuration.

🌐

Networking and Multi-Port Adapters

A networking appliance can use the PEX8605-AB50TQIG to consolidate several PCIe-facing functions behind one host interface. The switch offers four lanes and four ports with full line-rate operation, allowing each downstream link to be provisioned according to the traffic it must carry. The non-blocking internal fabric avoids a shared internal forwarding bottleneck, while packet cut-through supports rapid packet forwarding with a stated maximum latency of 250 ns for x1-to-x1 configurations. Integration requires careful lane-to-port mapping, reference-clock distribution, reset sequencing, and high-speed return-path design around the 128-pin exposed-pad TQFP footprint.

🔧

Embedded Platform PCIe Expansion

The PEX8605-AB50TQIG can expand PCIe connectivity in an embedded controller that has limited root-port resources. Its four-lane, four-port Gen 2 architecture supports multiple downstream functions while its compact 14 x 14 mm, 128-pin exposed-pad TQFP package preserves board area relative to larger systems. The low-power positioning of the PEX8605 architecture is relevant to consumer and embedded platforms where switching activity and standby behavior affect the total power budget. Board planners should reserve thermal and copper area beneath the exposed pad, provide clean supply rails, and verify that the selected firmware configuration matches every attached device.

🖥️

Server PCIe Consolidation

PEX8605-AB50TQIG is applicable to server platforms that need to share a host-facing PCIe resource among multiple devices. Its four-lane, four-port configuration allows the system architect to divide bandwidth among selected links while retaining full line-rate capability on the active ports. The packet cut-through architecture is intended to avoid the delay of store-and-forward operation, and Broadcom specifies a maximum latency of 250 ns in an x1-to-x1 arrangement. Practical deployment still requires device-class review, lane balancing, thermal analysis, fault containment, and validation of reset behavior across every downstream endpoint.

⚡

Low-Latency PCIe Routing

The PEX8605-AB50TQIG fits systems in which forwarding delay is a primary design constraint. Its packet cut-through architecture supports a maximum latency of 250 ns in x1-to-x1 operation, while the four ports can service separate downstream links through a non-blocking internal fabric. This combination is relevant to control, instrumentation, and data-processing equipment that exchanges short PCIe transactions. Designers should confirm the negotiated width of every link, prevent avoidable congestion through proper port allocation, and test the complete path because software queuing, device response time, and physical-layer behavior also contribute to end-to-end latency.

🧩

Consumer and Embedded Device Consolidation

The PEX8605 is designed for consumer and embedded applications where a compact, low-power PCIe switching function can replace multiple direct host connections. Four Gen 2 lanes and four ports provide a flexible connection fabric, and the non-blocking architecture supports full line-rate operation across the active ports. The 128-pin exposed-pad TQFP package still demands careful escape routing, reference-plane continuity, and thermal design. Firmware configuration, power management, peripheral compatibility, and connector or mezzanine signal integrity should be validated as a complete subsystem before production release.

What is the PEX8605-AB50TQIG used for?
The PEX8605-AB50TQIG is a four-lane, four-port PCI Express Gen 2 switch used to expand a system's PCIe connectivity. According to the Broadcom PEX8605 product documentation, its non-blocking internal architecture supports full line-rate operation on all ports. It can connect multiple downstream PCIe devices through a host-facing interface, reducing the number of PCIe root ports required by a motherboard or embedded system.
How many PCIe lanes and ports does PEX8605-AB50TQIG have?
The PEX8605-AB50TQIG provides four PCI Express lanes and four switch ports. Broadcom identifies the device as a Gen 2 PCIe switch and states that it operates at full line rate on all ports. The exact division of lanes among downstream ports depends on the selected operating configuration, so consult the Broadcom configuration documentation before assigning links in a particular system.
What is the maximum latency of the PEX8605-AB50TQIG?
The PEX8605-AB50TQIG has a maximum latency of 250 ns in an x1-to-x1 configuration. Broadcom attributes this performance to its packet cut-through architecture, which forwards packets without waiting for a complete store-and-forward cycle. This makes the switch suitable for systems where PCIe traffic must remain responsive while several ports operate concurrently.
Where can I download the PEX8605-AB50TQIG datasheet?
The official Broadcom product documentation for PEX8605-AB50TQIG is available through the Broadcom document link listed on this page. It describes the four-lane, four-port Gen 2 architecture, packet cut-through behavior, 250 ns maximum x1-to-x1 latency, and non-blocking internal switch design. Use the manufacturer document for pin descriptions, configuration tables, timing constraints, and the authoritative PCB footprint.
Where can I find the PEX8605-AB50TQIG pinout and package information?
The PEX8605-AB50TQIG uses a 128-pin, 14 x 14 mm exposed-pad TQFP package. Broadcom's reliability qualification documentation identifies it as a lead-free epTQFP assembly, while the manufacturer PEX8605 documentation contains the device information needed for board design. When assigning PCB nets, use the pin-description table and footprint drawing in the manufacturer documentation rather than an abbreviated distributor diagram.
Where can I buy PEX8605-AB50TQIG online?
Use the Request a Quote form on this page to request PEX8605-AB50TQIG availability, lot information, and commercial terms. The product is identified in current catalog listings as a Broadcom four-lane, four-port PCIe Gen 2 switch. The form lets the buyer specify quantity, target packaging, acceptable sourcing conditions, and required delivery schedule without relying on stale catalog availability.
What is the price of PEX8605-AB50TQIG?
The current commercial price for PEX8605-AB50TQIG should be requested through the Request a Quote form on this page. Quote pricing can depend on quantity, order date, supply status, and traceability requirements. Submit the required quantity and any lot or date-code constraints with the request so the commercial response reflects the intended production run rather than a generic single-unit reference.
What is the lead time for PEX8605-AB50TQIG?
Request the current lead time for PEX8605-AB50TQIG through the Request a Quote form on this page. The lead time depends on available inventory, manufacturing allocation, order quantity, and the required quality or traceability documents. Including the target date, annual usage, and acceptable delivery window in the request helps establish an actionable supply commitment.
Is PEX8605-AB50TQIG in stock?
PEX8605-AB50TQIG is currently identified by a catalog listing as an in-stock component, but confirm the quantity available for your order through the Request a Quote form on this page. Available inventory can change quickly and may be allocated between production, sample, and maintenance orders. The request should specify your required quantity, delivery date, and acceptable packing details.
PEX8605-AB50TQIG vs PEX8603-AB50TQIG - which switch should I choose?
Choose PEX8605-AB50TQIG when the design requires a four-lane, four-port PCIe Gen 2 switch with packet cut-through and a stated maximum latency of 250 ns in x1-to-x1 operation. The PEX8603-AB50TQIG is a different member of the Broadcom PCIe-switch portfolio, not a drop-in substitute for the PEX8605. Compare lane width, port configuration, timing, firmware, and footprint requirements before selecting it.
What is the difference between PEX8605-AB50TQIG and PEX8605-AB50NIG?
PEX8605-AB50TQIG and PEX8605-AB50NIG belong to the same Broadcom PEX8605 product family, but their listed package constructions differ. The AB50TQIG variant is documented in a 128-pin, 14 x 14 mm lead-free exposed-pad TQFP, while the AB50NIG catalog result identifies a 136-pin aQFN package measuring 10 x 10 mm. Their footprints therefore cannot be treated as interchange without a board redesign.
When should I choose PEX8605-AB50TQIG over another PCIe switch?
Choose PEX8605-AB50TQIG when four Gen 2 lanes, four ports, full line-rate operation, and low-latency packet cut-through are required in a consumer, embedded, server, storage, or networking design. It is particularly relevant when reducing the number of host-facing root ports is valuable. A different switch should be selected if lane width, port topology, firmware, thermal requirements, or footprint differs.
Is PEX8605-AB50TQIG suitable for storage and networking equipment?
Yes, PEX8605-AB50TQIG is suitable for storage and networking equipment that needs a low-latency PCIe expansion fabric. Its four-lane, four-port configuration supports multiple downstream links, while the non-blocking architecture and packet cut-through mode are designed to preserve throughput. Actual suitability depends on the required link widths, device count, traffic class, enclosure temperature, and power budget.
What can replace PEX8605-AB50TQIG?
A valid replacement must match the 128-pin exposed-pad TQFP footprint, pin assignment, power rails, reference-clock arrangement, PCIe generation, lane configuration, and firmware requirements. No confirmed drop-in substitute was established from the available manufacturer and cross-reference material. Order codes such as PEX8605-AB50NIG use a different 136-pin aQFN package, so they require PCB changes and are not drop-in replacements.
What are the key specifications of PEX8605-AB50TQIG that engineers should know?
The key specifications are four PCIe Gen 2 lanes, four ports, full line-rate operation, a non-blocking internal architecture, packet cut-through, and a maximum latency of 250 ns in x1-to-x1 configuration. Broadcom also identifies the 128-pin, 14 x 14 mm lead-free exposed-pad TQFP package and Renesas 90 nm process construction. These facts define its connectivity, performance, footprint, and implementation requirements.

Data referensi engineering untuk PEX8605-AB50TQIG — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Select PEX8605-AB50TQIG when the system needs a Broadcom PCIe Gen 2 switch with four lanes, four ports, full line-rate port operation, and packet cut-through for low-latency traffic. It is a strong fit for embedded systems, storage appliances, networking equipment, and server designs that need to consolidate several PCIe connections while preserving concurrent traffic. The exposed-pad TQFP requires deliberate thermal and routing work, so confirm that the PCB can support its 128-pin footprint and exposed-pad construction. Do not choose PEX8605-AB50NIG as a board-level substitute because it is listed in a 136-pin aQFN package. Likewise, PEX8603-AB50TQIG is a separate portfolio member whose architecture, configuration, and electrical requirements must be compared directly. Use another switch only when a different lane count, port topology, package, firmware environment, or board footprint is required and has passed a complete compatibility review.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini
Package 128-pin exposed-pad TQFP, 14 x 14 mm
Brand Broadcom
PCI Express Generation Gen 2
Lane Count 4 lanes
Port Count 4 ports
Maximum Latency 250 ns in x1-to-x1 configuration
Switching Architecture Non-blocking internal switch with packet cut-through
Process Technology Renesas 90 nm
Lead-Free Package Construction Yes

Diferensiator Kunci

  • Four-lane, four-port Gen 2 PCIe connectivity (vsPEX8603-AB50TQIG)
  • Packet cut-through with a stated maximum latency of 250 ns (vsPEX8605-AB50NIG)
  • Non-blocking internal switch architecture (vsPEX8603-AB50TQIG)

Catatan Desain

Treat the exposed pad as both an electrical connection and the primary thermal path. Place a continuous copper plane beneath the 128-pin TQFP, add thermal-via arrays where board area permits, and avoid splitting the ground or power reference beneath the device. Validate junction temperature under the worst simultaneous-port traffic case rather than an idle condition, because full line-rate operation across four ports can produce a materially different thermal profile from single-port traffic.

Preserve uninterrupted reference planes for every high-speed PCIe lane and minimize branch stubs during package escape routing. Sequence length compensation around the switch, maintain consistent impedance through vias and connector transitions, and keep supply and ground connections close to the corresponding pins. Because the device supports full line-rate operation on four ports, signal-integrity testing should cover simultaneous traffic in every intended port combination, including edge cases with unequal downstream link widths.

Use the Broadcom manufacturer footprint and pin-description table directly when defining the PCB land pattern. Account for the exposed pad, its via pattern, solder-mask and paste design, and the 14 x 14 mm package dimensions. Do not substitute the 10 x 10 mm 136-pin aQFN footprint associated with PEX8605-AB50NIG; the two package constructions require different escape routing, thermal treatment, and assembly processes.

Plan the power rails for both static demand and dynamic switching activity. Provide local high-frequency decoupling at the supply and ground pins, keep the return path short, and verify sequencing against the platform reset strategy. The switch supports a low-power application profile, but that positioning does not eliminate transient-current or IR-drop checks; measure rail droop during simultaneous traffic and ensure downstream-device current does not cause the switch or adjacent circuitry to leave its operating envelope.

Do not treat order codes with the same PEX8605 family name as automatic drop-in replacements. Compare package construction, pin assignment, lane mapping, port configuration, reference clocks, reset polarity, firmware, and electrical limits. PEX8605-AB50NIG is identified with a 136-pin aQFN package, while PEX8605-AB50TQIG uses a 128-pin exposed-pad TQFP, so substituting it would require a mechanical and electrical PCB redesign.

Informasi Konformitas

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Yes
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Broadcom's reliability qualification documentation identifies the PEX8605-AB50TQIG as a lead-free, exposed-pad TQFP assembly. The product listing identifies the device as RoHS compliant.

Data disahkan pada: 2026-11-16 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

PEX8605-AB50TQIG datasheet PEX8605-AB50TQIG pinout PEX8605-AB50TQIG datasheet pdf PEX8605-AB50TQIG equivalent PEX8605-AB50TQIG replacement PEX8605-AB50TQIG cross reference Broadcom PEX8605-AB50TQIG PEX8605-AB50TQIG price PEX8605-AB50TQIG stock PEX8605-AB50TQIG footprint PEX8605-AB50TQIG 4 lane switch PEX8605-AB50TQIG PCIe Gen 2 PEX8605-AB50TQIG vs PEX8603-AB50TQIG PEX8605-AB50TQIG application circuit

Komponen dan Istilah Terkait

Broadcom PEX8605-AB50TQIG PEX8605 PEX8603-AB50TQIG PEX8605-AB50NIG PCI Express PCIe Gen 2 PCIe switch interface IC semiconductor four-lane PCIe switch four-port PCIe switch packet cut-through non-blocking switch architecture 250 ns maximum latency full line rate Renesas 90 nm process 128-pin exposed-pad TQFP 14 x 14 mm package lead-free package RoHS server storage networking
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ