PEX8605-AB50TQIG - 4-Lane PCIe Gen 2 Switch | Broadcom
MPN: PEX8605-AB50TQIG ✓ 啟用中PEX8605-AB50TQIG 概覽
A PCI Express switch is a semiconductor that connects a PCI Express host or endpoint to multiple downstream devices. It belongs to the interface IC hierarchy, where PCIe fabric switching, lane multiplexing, and packet forwarding reduce the number of system expansion interfaces required by a motherboard or embedded platform. The PEX8605 therefore serves as infrastructure between a root complex and attached PCIe devices.
The switch provides four Gen 2 lanes and four ports, with full line-rate operation on all ports. Its non-blocking internal switch architecture and packet cut-through capability are designed for high-throughput, low-latency systems. Broadcom identifies consumer and embedded applications as suitable low-power operating environments, while the device is also associated with server, storage, networking, and enterprise equipment.
The PEX8605 architecture supports packet cut-through rather than store-and-forward operation, which is the central technical reason for its stated 250 ns maximum latency in x1-to-x1 use. A non-blocking fabric allows traffic associated with multiple ports to progress without a shared internal bottleneck, provided the upstream and downstream links are correctly provisioned and the configuration limits are respected.
Typical deployments include redundant storage paths, multi-port network adapters, embedded systems requiring PCIe expansion, and server platforms that need several PCIe connections behind one host interface. In each case, port configuration, lane width, reference-clock requirements, reset behavior, and thermal performance must be validated against the complete system design.
The principal design consideration is package-aware PCB implementation. The 128-pin exposed-pad TQFP footprint requires careful escape routing, uninterrupted input and output reference planes, and adequate thermal copper beneath the exposed pad. Power sequencing and signal-integrity verification are equally important because simultaneous high-speed traffic can expose return-path and supply-noise problems.
This product overview combines Broadcom architecture details, package and process information, verified commercial availability, and practical integration considerations. It also distinguishes true replacement requirements from superficially similar PEX8605 order codes, helping engineers confirm pin compatibility, package construction, lane configuration, and application suitability before committing a PCB design.
直接替換替代品,適用於 PEX8605-AB50TQIG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品PEX8605-AB50TQIG 最大額定值與電氣特性
| Product Type | PCI Express Gen 2 switch |
| PCI Express Generation | Gen 2 |
| Lane Count | 4 lanes |
| Port Count | 4 ports |
| Maximum Latency | 250 ns in x1-to-x1 configuration |
| Switching Architecture | Non-blocking internal switch with packet cut-through |
| Throughput Architecture | Full line rate on all ports |
| Process Technology | Renesas 90 nm |
| 封裝 | 128-pin exposed-pad TQFP, 14 x 14 mm |
| Package Construction | Lead-free exposed-pad TQFP |
| Assembly Location | ASE Kaohsiung, Taiwan |
| Low-Power Application Profile | Consumer and embedded low-power applications |
| RoHS 狀態 | Compliant |
| Lead-Free Status | Lead-free package construction |
PEX8605-AB50TQIG lead-free exposed-pad tqfp 腳位配置指南
PEX8605-AB50TQIG(lead-free exposed-pad tqfp 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: PEX8605-AB50TQIG.
請參閱 資料表 以查看完整腳位配置。
典型應用
PEX8605-AB50TQIG 適用於 6 應用s: Enterprise Storage Expansion, Networking and Multi-Port Adapters, Embedded Platform PCIe Expansion, Server PCIe Consolidation, Low-Latency PCIe Routing, Consumer and Embedded Device Consolidation.
Enterprise Storage Expansion
The PEX8605-AB50TQIG is suitable for a storage enclosure that must present several PCIe devices through a compact host interface. Four Gen 2 lanes and four ports provide a defined switching fabric, while the non-blocking architecture and full line-rate port operation help sustain concurrent transfers. Packet cut-through limits the stated maximum latency to 250 ns in an x1-to-x1 configuration, which is useful when a controller must coordinate commands across multiple storage targets. The design should allocate link widths according to traffic demand, keep the exposed thermal pad connected to a low-impedance copper area, and validate storage-controller power states against the switch configuration.
推薦
Networking and Multi-Port Adapters
A networking appliance can use the PEX8605-AB50TQIG to consolidate several PCIe-facing functions behind one host interface. The switch offers four lanes and four ports with full line-rate operation, allowing each downstream link to be provisioned according to the traffic it must carry. The non-blocking internal fabric avoids a shared internal forwarding bottleneck, while packet cut-through supports rapid packet forwarding with a stated maximum latency of 250 ns for x1-to-x1 configurations. Integration requires careful lane-to-port mapping, reference-clock distribution, reset sequencing, and high-speed return-path design around the 128-pin exposed-pad TQFP footprint.
推薦
Embedded Platform PCIe Expansion
The PEX8605-AB50TQIG can expand PCIe connectivity in an embedded controller that has limited root-port resources. Its four-lane, four-port Gen 2 architecture supports multiple downstream functions while its compact 14 x 14 mm, 128-pin exposed-pad TQFP package preserves board area relative to larger systems. The low-power positioning of the PEX8605 architecture is relevant to consumer and embedded platforms where switching activity and standby behavior affect the total power budget. Board planners should reserve thermal and copper area beneath the exposed pad, provide clean supply rails, and verify that the selected firmware configuration matches every attached device.
推薦
Server PCIe Consolidation
PEX8605-AB50TQIG is applicable to server platforms that need to share a host-facing PCIe resource among multiple devices. Its four-lane, four-port configuration allows the system architect to divide bandwidth among selected links while retaining full line-rate capability on the active ports. The packet cut-through architecture is intended to avoid the delay of store-and-forward operation, and Broadcom specifies a maximum latency of 250 ns in an x1-to-x1 arrangement. Practical deployment still requires device-class review, lane balancing, thermal analysis, fault containment, and validation of reset behavior across every downstream endpoint.
推薦
Low-Latency PCIe Routing
The PEX8605-AB50TQIG fits systems in which forwarding delay is a primary design constraint. Its packet cut-through architecture supports a maximum latency of 250 ns in x1-to-x1 operation, while the four ports can service separate downstream links through a non-blocking internal fabric. This combination is relevant to control, instrumentation, and data-processing equipment that exchanges short PCIe transactions. Designers should confirm the negotiated width of every link, prevent avoidable congestion through proper port allocation, and test the complete path because software queuing, device response time, and physical-layer behavior also contribute to end-to-end latency.
推薦
Consumer and Embedded Device Consolidation
The PEX8605 is designed for consumer and embedded applications where a compact, low-power PCIe switching function can replace multiple direct host connections. Four Gen 2 lanes and four ports provide a flexible connection fabric, and the non-blocking architecture supports full line-rate operation across the active ports. The 128-pin exposed-pad TQFP package still demands careful escape routing, reference-plane continuity, and thermal design. Firmware configuration, power management, peripheral compatibility, and connector or mezzanine signal integrity should be validated as a complete subsystem before production release.
推薦
推薦產品摘要
工程參考資料,適用於 PEX8605-AB50TQIG — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Package | 128-pin exposed-pad TQFP, 14 x 14 mm |
| Brand | Broadcom |
| PCI Express Generation | Gen 2 |
| Lane Count | 4 lanes |
| Port Count | 4 ports |
| Maximum Latency | 250 ns in x1-to-x1 configuration |
| Switching Architecture | Non-blocking internal switch with packet cut-through |
| Process Technology | Renesas 90 nm |
| Lead-Free Package Construction | Yes |
主要差異化特點
- Four-lane, four-port Gen 2 PCIe connectivity (對比PEX8603-AB50TQIG)
- Packet cut-through with a stated maximum latency of 250 ns (對比PEX8605-AB50NIG)
- Non-blocking internal switch architecture (對比PEX8603-AB50TQIG)
設計說明
Treat the exposed pad as both an electrical connection and the primary thermal path. Place a continuous copper plane beneath the 128-pin TQFP, add thermal-via arrays where board area permits, and avoid splitting the ground or power reference beneath the device. Validate junction temperature under the worst simultaneous-port traffic case rather than an idle condition, because full line-rate operation across four ports can produce a materially different thermal profile from single-port traffic.
Preserve uninterrupted reference planes for every high-speed PCIe lane and minimize branch stubs during package escape routing. Sequence length compensation around the switch, maintain consistent impedance through vias and connector transitions, and keep supply and ground connections close to the corresponding pins. Because the device supports full line-rate operation on four ports, signal-integrity testing should cover simultaneous traffic in every intended port combination, including edge cases with unequal downstream link widths.
Use the Broadcom manufacturer footprint and pin-description table directly when defining the PCB land pattern. Account for the exposed pad, its via pattern, solder-mask and paste design, and the 14 x 14 mm package dimensions. Do not substitute the 10 x 10 mm 136-pin aQFN footprint associated with PEX8605-AB50NIG; the two package constructions require different escape routing, thermal treatment, and assembly processes.
Plan the power rails for both static demand and dynamic switching activity. Provide local high-frequency decoupling at the supply and ground pins, keep the return path short, and verify sequencing against the platform reset strategy. The switch supports a low-power application profile, but that positioning does not eliminate transient-current or IR-drop checks; measure rail droop during simultaneous traffic and ensure downstream-device current does not cause the switch or adjacent circuitry to leave its operating envelope.
Do not treat order codes with the same PEX8605 family name as automatic drop-in replacements. Compare package construction, pin assignment, lane mapping, port configuration, reference clocks, reset polarity, firmware, and electrical limits. PEX8605-AB50NIG is identified with a 136-pin aQFN package, while PEX8605-AB50TQIG uses a 128-pin exposed-pad TQFP, so substituting it would require a mechanical and electrical PCB redesign.
合規資訊
Broadcom's reliability qualification documentation identifies the PEX8605-AB50TQIG as a lead-free, exposed-pad TQFP assembly. The product listing identifies the device as RoHS compliant.