Microchip Technology

PIC18F242-E/SP - 8-Bit 16KB Flash MCU | Microchip

MPN: PIC18F242-E/SP ✓ Aktif
5V nominal Vdss 28-pin SPDIP (0.300-inch, 7.62mm pitch) Package 40 MHz Speed 16KB Flash (8K x 16) Memory
MOQ: 1 |

PIC18F242-E/SP Ringkasan

The Microchip Technology PIC18F242-E/SP is an 8-bit PIC18-family RISC microcontroller with 16KB of Flash program memory, 256 bytes of EEPROM, and a 28-pin SPDIP package. It operates from a nominal 5V supply and supports an operating temperature range of -40°C to +125°C, making it suitable for extended-temperature industrial control, instrumentation, and embedded automation systems.

A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, and peripherals into one device. The PIC18F242 belongs to the PIC18 embedded-controller hierarchy, combining a C compiler-friendly development environment with self-programming and In-Circuit Debugger support. Its integrated peripherals reduce the number of external components required in compact control systems.

The PIC18F242 provides 16KB of Flash memory, 256 bytes of EEPROM, two Capture/Compare/PWM functions, and five channels of 10-bit analog-to-digital conversion. Its synchronous serial port can be configured for either 3-wire SPI or 2-wire I2C communication. These resources allow the MCU to manage sensors, actuators, digital buses, and control loops while retaining nonvolatile configuration data in EEPROM.

The device is based on an 8-bit RISC architecture and is identified in the product information as supporting operation up to 40MHz. Five 10-bit ADC channels provide compact embedded measurement capability, while the two Capture/Compare/PWM modules support timing, event capture, and pulse-width modulation tasks. The PIC18F242-I/SP listing in the same family confirms the 16KB Flash and 40MHz architecture classifications.

Typical applications include industrial temperature controllers, motor and valve control, sensor interfaces, programmable logic controllers, measurement instruments, and compact embedded control panels. SPI and I2C connectivity allows the MCU to communicate with sensors, displays, transceivers, and data converters, while the ADC inputs support analog process signals after suitable conditioning.

When laying out a board, use the 28-pin SPDIP footprint and follow the exact pin-description table in the manufacturer datasheet, especially for MCLR, programming pins, oscillator functions, and analog references. Place bypass capacitors close to the supply pins, reserve programming access for In-Circuit Debugger operation, and confirm signal levels before connecting external analog circuitry.

This product record combines the manufacturer architecture description, package and temperature information, lifecycle context, sourcing guidance, and application-oriented design guidance. It is intended to help engineers identify the correct MCU, evaluate genuine same-package alternatives, and plan a reliable PIC18F242-E/SP implementation.

Alternatif penggantian untuk PIC18F242-E/SP — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian PIC18F242-E/SP (sama faktor bentuk dan footprint) — berbeda di dalam Package, Operating Temperature Range, Self-Programming, Mounting Type, Maximum CPU Speed.

Microchip Technology
Package: 28-pin SPDIP (Skinny Plastic DIP) - SP
Operating Temperature Range: -40C to +125C (Extended, "E" suffix)
Maximum CPU Speed: 10 MIPS (40 MHz oscillator)
Microchip Technology
Package: 28-SPDIP (Skinny Plastic DIP, 0.300 inch)
Operating Temperature Range: -40 °C to +85 °C (Industrial)
Self-Programming: Yes (Flash + ICD)
Microchip Technology
Package: 28-pin SPDIP (0.300 inch, 7.62 mm)
Self-Programming: Yes (in-field flash updates)
Microchip Technology
Package: 28-pin SPDIP (Skinny Plastic DIP)
Maximum CPU Speed: 40 MHz (10 MIPS)

PIC18F242-I/SP

✅ Drop-In
Microchip Technology
📦 28-pin SPDIP (0.300-inch, 7.62mm pitch)
8-bit PIC18 enhanced RISC · 16-bit (77 single-word instructions) · 40 MHz (10 MIPS) · 16 KB (8K x 16) · 768 bytes · 256 bytes · 4.2 V to 5.5 V · 23

Kontak untuk harga

Lihat Datasheet →

PIC18C242-E/SP

✅ Drop-In
Microchip Technology
📦 28-pin SPDIP (0.300-inch, 7.62mm pitch)
PIC18C · 8-bit PIC RISC · OTP (One-Time-Programmable EPROM) · 16 KB · 512 B · 10 MIPS (40 MHz oscillator) · 100 ns (single-word instruction) · 77 single-word instructions

Kontak untuk harga

Lihat Datasheet →

PIC18F252-E/SP

✅ Drop-In
Microchip Technology
📦 28-pin SPDIP (0.300-inch, 7.62mm pitch)
8-bit PIC18F Harvard RISC · Microchip PIC18 enhanced core · 32 KB (16K x 16 words) · 1.5 KB (1536 bytes) · 256 bytes · 40 MHz · 10 MIPS · 4.2 V to 5.5 V

Kontak untuk harga

Lihat Datasheet →

PIC18F242-E/SP Rating Maksimal & Karakteristik Listrik

Microcontroller Type 8-bit RISC flash microcontroller
Product Family PIC18
Program Memory 16KB Flash (8K x 16)
EEPROM Memory 256 bytes
Frekuensi Bawah Maximum 40 MHz
ADC Resolution 10 bits
ADC Channels 5 channels
Capture/Compare/PWM Modules 2
Synchronous Serial Interface 3-wire SPI or 2-wire I2C
Tegangan Pemuat Kerja 5V nominal
Rentang Suhu Kerja -40°C to +125°C
Paket 28-pin SPDIP (0.300-inch, 7.62mm pitch)
Tipe Mounting Through-hole
Self-Programming Supported
In-Circuit Debugger Support Supported
Development Environment C compiler friendly

Konfigurasi Pin PIC18F242-E/SP

DIP-28 Package Pinout Diagram DIP-28 28-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 28 2 27 3 26 4 25 5 24 6 23 7 22 8 21 9 20 10 19 11 18 12 17 13 16 14 15 DIP-28
Pin produk 1 MCLR/VPP/RE3 — Program voltage, master clear, and digital input/output RE3
Pin produk 2 RA0/AN0 — Digital input/output RA0 and analog input AN0
Pin produk 3 RA1/AN1 — Digital input/output RA1 and analog input AN1
Pin produk 4 RA2/AN2/VREF-/CVREF — Digital input/output RA2, analog input AN2, negative reference, and CVREF
Pin produk 5 RA3/AN3/VREF+/CVREF — Digital input/output RA3, analog input AN3, positive reference, and CVREF
Pin produk 6 RA4/T0CKI — Digital input/output RA4 and Timer0 clock input
Pin produk 7 RA5/AN4/SS/C2OUT — Digital input/output RA5, analog input AN4, SPI slave select, and Comparator 2 output
Pin produk 8 VSS — Ground reference
Pin produk 9 RA7/OSC1/CLKI — Digital input/output RA7, oscillator input, and external clock input
Pin produk 10 RA6/OSC2/CLKO — Digital input/output RA6, oscillator output, and external clock output
Pin produk 11 RC0/T1OSO/T1CKI — Digital input/output RC0, Timer1 oscillator output, and Timer1 clock input
Pin produk 12 RC1/T1OSI/CCP2 — Digital input/output RC1, Timer1 oscillator input, and Capture/Compare/PWM 2
Pin produk 13 RC2/CCP1 — Digital input/output RC2 and Capture/Compare/PWM 1
Pin produk 14 RC3/SCK/SCL — Digital input/output RC3, SPI clock, and I2C clock
Pin produk 15 RC4/SDI/SDA — Digital input/output RC4, SPI data input, and I2C data
Pin produk 16 RC5/SDO — Digital input/output RC5 and SPI data output
Pin produk 17 VDD — Positive supply voltage
Pin produk 18 VSS — Ground reference
Pin produk 19 RC6/TX/CK — Digital input/output RC6, asynchronous transmit, and synchronous clock
Pin produk 20 RC7/RX/DT — Digital input/output RC7, asynchronous receive, and synchronous data
Pin produk 21 RB0/INT — Digital input/output RB0 and external interrupt
Pin produk 22 RB1/INT — Digital input/output RB1 and external interrupt
Pin produk 23 RB2 — Digital input/output RB2
Pin produk 24 RB3/PGM — Digital input/output RB3 and low-voltage programming mode input
Pin produk 25 RB4 — Digital input/output RB4
Pin produk 26 RB5 — Digital input/output RB5
Pin produk 27 RB6 — Digital input/output RB6
Pin produk 28 RB7 — Digital input/output RB7

Aplikasi Umum

PIC18F242-E/SP cocok untuk 6 aplikasis: Industrial Temperature Control, Motor and Valve Control, Sensor Acquisition and Conditioning, Programmable Logic Controller, Communication Interface Module, Automated Test and Measurement.

🏭

Industrial Temperature Control

The PIC18F242-E/SP fits compact industrial temperature controllers because its -40°C to +125°C rating supports extended-temperature operation, while five 10-bit ADC channels can monitor conditioned analog sensor signals. Two Capture/Compare/PWM modules provide timing functions for heaters, alarms, or indicator drives. The 16KB Flash memory accommodates the control algorithm, and 256 bytes of EEPROM can retain calibration or configuration data. The device is placed between the sensor network and actuator outputs, with its supply and programming interfaces routed for reliable serviceability.

🔧

Motor and Valve Control

PIC18F242-E/SP can serve as the supervisory controller in a small motor-control or valve-control assembly because its two Capture/Compare/PWM modules provide dedicated timing resources for pulse generation and input capture. The 5V nominal supply and 8-bit RISC architecture fit compact embedded-control boards, while the 16KB Flash memory is sufficient for sequencing, interlocks, and fault handling. PWM outputs should drive external transistor stages rather than load motors directly, and timing-sensitive feedback should use the Capture/Compare inputs with appropriate isolation or filtering.

🧩

Sensor Acquisition and Conditioning

The five-channel, 10-bit ADC in the PIC18F242-E/SP supports multi-sensor acquisition in industrial instruments, environmental monitors, and laboratory equipment. Place low-pass filtering and gain control ahead of the analog inputs, then use the MCU for calibration, linearization, and threshold decisions. The synchronous serial port can connect to external sensors or converters through SPI or I2C, reducing the need for discrete interface hardware. The 256-byte EEPROM provides limited persistent configuration storage, while the 16KB Flash stores the measurement and communications firmware.

⚡

Programmable Logic Controller

PIC18F242-E/SP can implement a compact PLC-like controller for discrete logic, alarms, interlocks, and simple analog supervision. Its 23 I/O-class architecture in the PIC18 family, programmable Flash memory, EEPROM configuration storage, and priority-based interrupt support make it appropriate for small embedded control panels. The five ADC channels extend the controller beyond simple digital logic, while SPI or I2C allows connection to operator displays, expansion boards, or remote I/O. Production designs should validate I/O availability, expansion timing, and environmental qualification against the exact firmware requirements.

🌐

Communication Interface Module

The PIC18F242-E/SP can act as a protocol bridge or embedded communications controller because its synchronous serial port supports either 3-wire SPI or 2-wire I2C. Engineers can connect sensors, display modules, transceivers, or data converters while the 8-bit RISC core manages framing and device responses. The 16KB Flash capacity supports moderate protocol stacks and configuration tables, and the five ADC channels permit supervisory analog measurements. Keep bus routing short, provide the required pull-up or termination components, and isolate external interfaces where surge or ground-potential conditions are possible.

🖥️

Automated Test and Measurement

PIC18F242-E/SP is applicable to compact automated test fixtures where sequencing, measurement, and communication must be combined on one controller. Five 10-bit ADC channels can collect basic analog measurements, two Capture/Compare/PWM functions can handle timing events or stimulus generation, and SPI or I2C can connect to instruments and external test hardware. Its 16KB Flash memory supports test-sequence firmware, while EEPROM can hold fixture configuration. For precision measurement, use a dedicated high-resolution ADC and treat the internal converter as a supervision or coarse-measurement channel.

What are the key specifications of PIC18F242-E/SP that engineers should know?
The PIC18F242-E/SP is a 5V nominal, 8-bit PIC18 RISC microcontroller with 16KB of Flash program memory, 256 bytes of EEPROM, five 10-bit ADC channels, and two Capture/Compare/PWM modules. It is packaged in a 28-pin SPDIP and rated for -40°C to +125°C. According to the Microchip product page, it also supports self-programming, In-Circuit Debugger operation, and SPI or I2C communication.
Where can I download the PIC18F242-E/SP datasheet PDF?
The authoritative PIC18F242-E/SP documentation is available through the Microchip Technology PIC18F242 product page at https://www.microchip.com/en-us/product/PIC18F242. The manufacturer product page provides the device data sheet and supporting documentation. Use the pin-description and electrical-characteristics tables when defining the PCB footprint, programming connection, supply network, and analog input configuration.
Where can I find the PIC18F242-E/SP pinout?
The PIC18F242-E/SP pinout is defined by the 28-pin package drawing in the Microchip PIC18F242/252/442/452 family documentation. According to the manufacturer product brief, the family supports multiple package options, so confirm the 28-pin SPDIP diagram rather than applying a diagram from a different package. The device includes dedicated MCLR, programming, oscillator, power, I/O, analog, and serial-interface functions.
What is the difference between PIC18F242-E/SP and PIC18F242-I/SP?
PIC18F242-E/SP and PIC18F242-I/SP are the same 28-pin SPDIP PIC18F242 device distinguished primarily by their temperature-grade suffix. The E/SP version is listed for -40°C to +125°C, while the I/SP listing identifies the same 16KB Flash, 40MHz, 28-SPDIP architecture. Their shared package and core device identity make the I/SP a direct same-package replacement when its specified operating conditions satisfy the design.
Can PIC18F242-I/SP replace PIC18F242-E/SP without changing the PCB?
Yes, PIC18F242-I/SP can serve as a drop-in replacement for PIC18F242-E/SP when the finished equipment allows the industrial-temperature grade. Both use the 28-pin SPDIP footprint and are identified with the same 16KB Flash, 8K x 16 organization, and 40MHz PIC18 architecture. The E/SP product record specifies -40°C to +125°C, so verify the exact suffix requirements and environmental qualification before approving the substitution.
What can replace PIC18F242-E/SP on the same PCB?
PIC18F242-I/SP is the clearest same-package replacement for PIC18F242-E/SP because it retains the 28-pin SPDIP footprint, 16KB Flash configuration, and 40MHz PIC18F242 architecture. PIC18C242-E/SP and PIC18F252-E/SP appear in family comparison material as related 28-pin options, but their memory and legacy-device differences must be checked against firmware requirements. No additional cross-brand drop-in MCU was established by the available compatibility records.
Is PIC18F252-E/SP a drop-in replacement for PIC18F242-E/SP?
PIC18F252-E/SP is a same-package PIC18 family candidate, but it is not an electrically identical substitute for every PIC18F242 design. Microchip family comparison material places PIC18F242 and PIC18F252 in the same 28-pin and 40-pin product group, while the two devices occupy different positions in the memory hierarchy. Confirm flash capacity, RAM, peripheral availability, interrupt behavior, timing, and application code before using it as a replacement.
Is PIC18C242-E/SP suitable as a PIC18F242-E/SP replacement?
PIC18C242-E/SP may be considered only after a detailed compatibility review because it belongs to the legacy PIC18C family while PIC18F242 uses Flash program memory. The available comparison records identify both parts as related and note family, package, and compliance comparisons, but they do not establish every register, peripheral, and programming compatibility condition. Validate the complete pin and firmware requirements using the Microchip compatibility chart.
When should I choose PIC18F242-E/SP over PIC18F242-I/SP?
Choose PIC18F242-E/SP when the BOM specifically calls for the E/SP ordering code and the product is intended for an extended-temperature environment. Both parts share the 28-pin SPDIP package and the same 16KB Flash, 40MHz PIC18F242 architecture, so the deciding point is not PCB geometry. Confirm the approved temperature grade, qualification requirements, and purchasing configuration before finalizing the BOM.
Is PIC18F242-E/SP suitable for industrial control and instrumentation?
Yes, PIC18F242-E/SP is suitable for many industrial control and instrumentation designs because it combines a -40°C to +125°C operating range with five 10-bit ADC channels, two Capture/Compare/PWM modules, and 256 bytes of EEPROM. Its 16KB Flash memory and SPI or I2C serial interface also support compact embedded controllers. Application suitability still depends on sensor accuracy, isolation requirements, and long-term qualification.
Where can I buy PIC18F242-E/SP online and what is its lead time?
Use the Request a Quote form on this page to request the current PIC18F242-E/SP unit price, stock position, minimum order quantity, and lead time. The listed product is a standard catalog MCU with a 28-pin SPDIP package, and a 2026 distributor record reports inventory. Current fulfillment timing should be confirmed through the quote request rather than inferred from an old listing.
What is the price of PIC18F242-E/SP?
The current price of PIC18F242-E/SP is obtained through the Request a Quote form on this page. Pricing depends on order quantity, inventory, and purchasing conditions, so a live quote provides the most useful commercial response. The part is identified as a Microchip Technology 8-bit microcontroller with 16KB Flash in a 28-pin SPDIP tube configuration.
Is PIC18F242-E/SP in stock and what is the lead time?
A 2026 distributor record reports 7,728 PIC18F242-E/SP units in stock, but that inventory figure is not a guarantee for the current purchasing period. Use the Request a Quote form on this page for present availability and a confirmed lead time. The standard ordering configuration is a 28-pin SPDIP tube, subject to the requested quantity.
How much power supply decoupling does PIC18F242-E/SP require?
Place the required supply bypass capacitors directly across the device VDD and VSS pins, using the values and layout specified in the manufacturer data sheet. The PIC18F242-E/SP operates at a nominal 5V supply, and its ADC and digital peripherals make clean, low-impedance supply distribution important. Keep analog and digital return-current paths controlled so switching and input-current transients do not create unacceptable supply ripple.
Does PIC18F242-E/SP support SPI, I2C, and In-Circuit Debugger operation?
Yes, the PIC18F242 supports a synchronous serial port configurable as either a 3-wire SPI or 2-wire I2C interface. Microchip also identifies In-Circuit Debugger support as a core device feature. These functions allow the MCU to connect to external sensors, converters, transceivers, and programming equipment, while the 16KB Flash program memory supports self-programming applications.

Data referensi engineering untuk PIC18F242-E/SP — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose PIC18F242-E/SP when the design requires a 28-pin SPDIP PIC18 controller with 16KB Flash, five 10-bit ADC channels, two Capture/Compare/PWM modules, and an extended-temperature ordering code. PIC18F242-I/SP is the strongest same-footprint alternative when the equivalent Flash architecture and 40MHz performance are sufficient and the approved temperature-grade suffix differs. Consider PIC18F252-E/SP only after checking its memory hierarchy, RAM, peripherals, interrupt behavior, and firmware against the PIC18F242. PIC18C242-E/SP requires particular care because its legacy program-memory architecture may complicate an otherwise compatible board. No cross-brand drop-in replacement was established. For new precision or high-speed designs, verify whether the MCU's five 10-bit ADC channels and 16KB program-memory limit meet the system requirements before finalizing the design.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini PIC18F242-I/SP PIC18C242-E/SP PIC18F252-E/SP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-pin SPDIP (0.300-inch, 7.62mm pitch) 28-pin SPDIP (0.300-inch, 7.62mm pitch) 28-pin SPDIP 28-pin SPDIP
Controller Architecture 8-bit PIC18 RISC 8-bit PIC18 RISC Legacy PIC18C architecture 8-bit PIC18 RISC

Diferensiator Kunci

  • Exact Flash-based PIC18F242 architecture with extended-temperature ordering (vsPIC18F242-I/SP)
  • Maintains the same 28-pin footprint while avoiding legacy program-memory migration (vsPIC18C242-E/SP)
  • Targets the lower end of the PIC18 memory hierarchy with 16KB Flash (vsPIC18F252-E/SP)

Catatan Desain

Route the 28-pin SPDIP footprint according to the manufacturer package drawing and preserve the 0.300-inch, 7.62mm pitch. Keep the MCLR/VPP/RE3 and RB3/PGM programming connections accessible, and place the required bypass capacitors close to VDD and VSS. The 28-pin MCU has both analog and digital functions, so route analog inputs away from oscillator and switching-current paths to reduce coupling into the five ADC channels.

Use a regulated 5V nominal source and follow the datasheet's supply and decoupling requirements. Place the principal bypass capacitor immediately across the MCU supply pins, with any additional bulk capacitance positioned according to the power-source impedance. Estimated: if a 100mA transient creates a 50mV droop, the permitted supply noise margin becomes a direct accuracy concern for the 10-bit ADC; actual capacitor sizing must use the required transient and ESR/ESL data from the design.

Assign oscillator-sensitive analog inputs carefully and keep the RA7/OSC1/CLKI and RA6/OSC2/CLKO routing short and away from high-current switching nodes. The RA2 and RA3 pins provide VREF- and VREF+ functions when analog voltage references are required. Follow the reference voltage and decoupling guidance in the manufacturer data sheet because ADC accuracy, reference stability, and ground-return design are tightly coupled.

Do not assume that every PIC18-family 28-pin device is interchangeable at the firmware level. PIC18C242-E/SP uses legacy program-memory characteristics, while PIC18F252-E/SP belongs to a different point in the PIC18 memory hierarchy. For every candidate besides PIC18F242-I/SP, review the Microchip pin and code compatibility chart, confirm required peripherals and memory sizes, and rebuild the firmware before approving a replacement.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The target is an industrial-temperature 8-bit microcontroller rather than an automotive-qualified device. No explicit target-part RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified.

Pencarian Terkait

pic18f242 datasheet PIC18F242-E/SP datasheet pdf PIC18F242-E/SP pinout PIC18F242-E/SP specifications PIC18F242-E/SP replacement PIC18F242-E/SP equivalent PIC18F242-E/SP vs PIC18F242-I/SP PIC18F242-E/SP vs PIC18F252-E/SP Microchip PIC18F242-E/SP PIC18F242 28-pin SPDIP microcontroller PIC18F242-E/SP price PIC18F242-E/SP stock PIC18F242 industrial temperature controller PIC18F242 10-bit ADC application PIC18F242-E/SP programming

Komponen dan Istilah Terkait

Microchip Technology PIC18F242-E/SP PIC18F242 PIC18F242-I/SP PIC18C242-E/SP PIC18F252-E/SP PIC18 PICmicro 8-bit RISC microcontroller embedded microcontroller Flash program memory EEPROM 10-bit ADC Capture/Compare/PWM SPI I2C In-Circuit Debugger self-programming 28-pin SPDIP through-hole package industrial control sensor acquisition programmable logic controller PIC18F242-E/SP footprint
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ