PIC18F242-E/SP - 8-Bit 16KB Flash MCU | Microchip
MPN: PIC18F242-E/SP ✓ AktifPIC18F242-E/SP Ringkasan
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, and peripherals into one device. The PIC18F242 belongs to the PIC18 embedded-controller hierarchy, combining a C compiler-friendly development environment with self-programming and In-Circuit Debugger support. Its integrated peripherals reduce the number of external components required in compact control systems.
The PIC18F242 provides 16KB of Flash memory, 256 bytes of EEPROM, two Capture/Compare/PWM functions, and five channels of 10-bit analog-to-digital conversion. Its synchronous serial port can be configured for either 3-wire SPI or 2-wire I2C communication. These resources allow the MCU to manage sensors, actuators, digital buses, and control loops while retaining nonvolatile configuration data in EEPROM.
The device is based on an 8-bit RISC architecture and is identified in the product information as supporting operation up to 40MHz. Five 10-bit ADC channels provide compact embedded measurement capability, while the two Capture/Compare/PWM modules support timing, event capture, and pulse-width modulation tasks. The PIC18F242-I/SP listing in the same family confirms the 16KB Flash and 40MHz architecture classifications.
Typical applications include industrial temperature controllers, motor and valve control, sensor interfaces, programmable logic controllers, measurement instruments, and compact embedded control panels. SPI and I2C connectivity allows the MCU to communicate with sensors, displays, transceivers, and data converters, while the ADC inputs support analog process signals after suitable conditioning.
When laying out a board, use the 28-pin SPDIP footprint and follow the exact pin-description table in the manufacturer datasheet, especially for MCLR, programming pins, oscillator functions, and analog references. Place bypass capacitors close to the supply pins, reserve programming access for In-Circuit Debugger operation, and confirm signal levels before connecting external analog circuitry.
This product record combines the manufacturer architecture description, package and temperature information, lifecycle context, sourcing guidance, and application-oriented design guidance. It is intended to help engineers identify the correct MCU, evaluate genuine same-package alternatives, and plan a reliable PIC18F242-E/SP implementation.
Pilihan pengganti yang segera untuk PIC18F242-E/SP — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera PIC18F242-E/SP (sama faktor bentuk dan kaki) — berbeza dalam Package, Operating Temperature Range, Self-Programming, Mounting Type, Maximum CPU Speed.
PIC18F242-I/SP
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →PIC18C242-E/SP
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →PIC18F252-E/SP
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →PIC18F242-E/SP Penilaian maksimum & Ciri-ciri Elektrik
| Microcontroller Type | 8-bit RISC flash microcontroller |
| Product Family | PIC18 |
| Program Memory | 16KB Flash (8K x 16) |
| EEPROM Memory | 256 bytes |
| Frekuensi Klock Maksimum | 40 MHz |
| ADC Resolution | 10 bits |
| ADC Channels | 5 channels |
| Capture/Compare/PWM Modules | 2 |
| Synchronous Serial Interface | 3-wire SPI or 2-wire I2C |
| Tegangan Pemberi Arus Operasi | 5V nominal |
| Gambaran Suhu Operasi | -40°C to +125°C |
| Kemasan | 28-pin SPDIP (0.300-inch, 7.62mm pitch) |
| Jenis Pemasangan | Through-hole |
| Self-Programming | Supported |
| In-Circuit Debugger Support | Supported |
| Development Environment | C compiler friendly |
Konfigurasi Pin PIC18F242-E/SP
| Pin 1 | MCLR/VPP/RE3 — Program voltage, master clear, and digital input/output RE3 |
| Pin 2 | RA0/AN0 — Digital input/output RA0 and analog input AN0 |
| Pin 3 | RA1/AN1 — Digital input/output RA1 and analog input AN1 |
| Pin 4 | RA2/AN2/VREF-/CVREF — Digital input/output RA2, analog input AN2, negative reference, and CVREF |
| Pin 5 | RA3/AN3/VREF+/CVREF — Digital input/output RA3, analog input AN3, positive reference, and CVREF |
| Pin 6 | RA4/T0CKI — Digital input/output RA4 and Timer0 clock input |
| Pin 7 | RA5/AN4/SS/C2OUT — Digital input/output RA5, analog input AN4, SPI slave select, and Comparator 2 output |
| Pin 8 | VSS — Ground reference |
| Pin 9 | RA7/OSC1/CLKI — Digital input/output RA7, oscillator input, and external clock input |
| Pin 10 | RA6/OSC2/CLKO — Digital input/output RA6, oscillator output, and external clock output |
| Pin 11 | RC0/T1OSO/T1CKI — Digital input/output RC0, Timer1 oscillator output, and Timer1 clock input |
| Pin 12 | RC1/T1OSI/CCP2 — Digital input/output RC1, Timer1 oscillator input, and Capture/Compare/PWM 2 |
| Pin 13 | RC2/CCP1 — Digital input/output RC2 and Capture/Compare/PWM 1 |
| Pin 14 | RC3/SCK/SCL — Digital input/output RC3, SPI clock, and I2C clock |
| Pin 15 | RC4/SDI/SDA — Digital input/output RC4, SPI data input, and I2C data |
| Pin 16 | RC5/SDO — Digital input/output RC5 and SPI data output |
| Pin 17 | VDD — Positive supply voltage |
| Pin 18 | VSS — Ground reference |
| Pin 19 | RC6/TX/CK — Digital input/output RC6, asynchronous transmit, and synchronous clock |
| Pin 20 | RC7/RX/DT — Digital input/output RC7, asynchronous receive, and synchronous data |
| Pin 21 | RB0/INT — Digital input/output RB0 and external interrupt |
| Pin 22 | RB1/INT — Digital input/output RB1 and external interrupt |
| Pin 23 | RB2 — Digital input/output RB2 |
| Pin 24 | RB3/PGM — Digital input/output RB3 and low-voltage programming mode input |
| Pin 25 | RB4 — Digital input/output RB4 |
| Pin 26 | RB5 — Digital input/output RB5 |
| Pin 27 | RB6 — Digital input/output RB6 |
| Pin 28 | RB7 — Digital input/output RB7 |
Aplikasi Biasa
PIC18F242-E/SP patut untuk 6 aplikasis: Industrial Temperature Control, Motor and Valve Control, Sensor Acquisition and Conditioning, Programmable Logic Controller, Communication Interface Module, Automated Test and Measurement.
Industrial Temperature Control
The PIC18F242-E/SP fits compact industrial temperature controllers because its -40°C to +125°C rating supports extended-temperature operation, while five 10-bit ADC channels can monitor conditioned analog sensor signals. Two Capture/Compare/PWM modules provide timing functions for heaters, alarms, or indicator drives. The 16KB Flash memory accommodates the control algorithm, and 256 bytes of EEPROM can retain calibration or configuration data. The device is placed between the sensor network and actuator outputs, with its supply and programming interfaces routed for reliable serviceability.
Disebarkan
Motor and Valve Control
PIC18F242-E/SP can serve as the supervisory controller in a small motor-control or valve-control assembly because its two Capture/Compare/PWM modules provide dedicated timing resources for pulse generation and input capture. The 5V nominal supply and 8-bit RISC architecture fit compact embedded-control boards, while the 16KB Flash memory is sufficient for sequencing, interlocks, and fault handling. PWM outputs should drive external transistor stages rather than load motors directly, and timing-sensitive feedback should use the Capture/Compare inputs with appropriate isolation or filtering.
Disebarkan
Sensor Acquisition and Conditioning
The five-channel, 10-bit ADC in the PIC18F242-E/SP supports multi-sensor acquisition in industrial instruments, environmental monitors, and laboratory equipment. Place low-pass filtering and gain control ahead of the analog inputs, then use the MCU for calibration, linearization, and threshold decisions. The synchronous serial port can connect to external sensors or converters through SPI or I2C, reducing the need for discrete interface hardware. The 256-byte EEPROM provides limited persistent configuration storage, while the 16KB Flash stores the measurement and communications firmware.
Disebarkan
Programmable Logic Controller
PIC18F242-E/SP can implement a compact PLC-like controller for discrete logic, alarms, interlocks, and simple analog supervision. Its 23 I/O-class architecture in the PIC18 family, programmable Flash memory, EEPROM configuration storage, and priority-based interrupt support make it appropriate for small embedded control panels. The five ADC channels extend the controller beyond simple digital logic, while SPI or I2C allows connection to operator displays, expansion boards, or remote I/O. Production designs should validate I/O availability, expansion timing, and environmental qualification against the exact firmware requirements.
Disebarkan
Communication Interface Module
The PIC18F242-E/SP can act as a protocol bridge or embedded communications controller because its synchronous serial port supports either 3-wire SPI or 2-wire I2C. Engineers can connect sensors, display modules, transceivers, or data converters while the 8-bit RISC core manages framing and device responses. The 16KB Flash capacity supports moderate protocol stacks and configuration tables, and the five ADC channels permit supervisory analog measurements. Keep bus routing short, provide the required pull-up or termination components, and isolate external interfaces where surge or ground-potential conditions are possible.
Disebarkan
Automated Test and Measurement
PIC18F242-E/SP is applicable to compact automated test fixtures where sequencing, measurement, and communication must be combined on one controller. Five 10-bit ADC channels can collect basic analog measurements, two Capture/Compare/PWM functions can handle timing events or stimulus generation, and SPI or I2C can connect to instruments and external test hardware. Its 16KB Flash memory supports test-sequence firmware, while EEPROM can hold fixture configuration. For precision measurement, use a dedicated high-resolution ADC and treat the internal converter as a supervision or coarse-measurement channel.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk PIC18F242-E/SP — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | PIC18F242-I/SP | PIC18C242-E/SP | PIC18F252-E/SP |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SPDIP (0.300-inch, 7.62mm pitch) | 28-pin SPDIP (0.300-inch, 7.62mm pitch) | 28-pin SPDIP | 28-pin SPDIP |
| Controller Architecture | 8-bit PIC18 RISC | 8-bit PIC18 RISC | Legacy PIC18C architecture | 8-bit PIC18 RISC |
Penyeberangsung Jelas
- Exact Flash-based PIC18F242 architecture with extended-temperature ordering (vsPIC18F242-I/SP)
- Maintains the same 28-pin footprint while avoiding legacy program-memory migration (vsPIC18C242-E/SP)
- Targets the lower end of the PIC18 memory hierarchy with 16KB Flash (vsPIC18F252-E/SP)
Catatan Desain
Route the 28-pin SPDIP footprint according to the manufacturer package drawing and preserve the 0.300-inch, 7.62mm pitch. Keep the MCLR/VPP/RE3 and RB3/PGM programming connections accessible, and place the required bypass capacitors close to VDD and VSS. The 28-pin MCU has both analog and digital functions, so route analog inputs away from oscillator and switching-current paths to reduce coupling into the five ADC channels.
Use a regulated 5V nominal source and follow the datasheet's supply and decoupling requirements. Place the principal bypass capacitor immediately across the MCU supply pins, with any additional bulk capacitance positioned according to the power-source impedance. Estimated: if a 100mA transient creates a 50mV droop, the permitted supply noise margin becomes a direct accuracy concern for the 10-bit ADC; actual capacitor sizing must use the required transient and ESR/ESL data from the design.
Assign oscillator-sensitive analog inputs carefully and keep the RA7/OSC1/CLKI and RA6/OSC2/CLKO routing short and away from high-current switching nodes. The RA2 and RA3 pins provide VREF- and VREF+ functions when analog voltage references are required. Follow the reference voltage and decoupling guidance in the manufacturer data sheet because ADC accuracy, reference stability, and ground-return design are tightly coupled.
Do not assume that every PIC18-family 28-pin device is interchangeable at the firmware level. PIC18C242-E/SP uses legacy program-memory characteristics, while PIC18F252-E/SP belongs to a different point in the PIC18 memory hierarchy. For every candidate besides PIC18F242-I/SP, review the Microchip pin and code compatibility chart, confirm required peripherals and memory sizes, and rebuild the firmware before approving a replacement.
Maklumat Kesediaan
The target is an industrial-temperature 8-bit microcontroller rather than an automotive-qualified device. No explicit target-part RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified.