PIC18F66K22-E/MR - 8-bit 64MHz 64KB Flash MCU 64-VQFN | Microchip
MPN: PIC18F66K22-E/MR ✓ AktifPIC18F66K22-E/MR Ringkasan
A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data memory, and integrated peripherals such as ADCs, timers, and communication controllers. The PIC18 family belongs to Microchip's 8-bit PIC® RISC architecture hierarchy: PIC18 -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The K-series adds the nanoWatt XLP technology for ultra-low-power operation, targeting battery-powered and energy-harvesting applications where sleep current and wake-up time dominate energy budgets.
Key features include the Charge Time Measurement Unit (CTMU) for capacitive touch sensing, multiple communication peripherals (UART, SPI, I2C), enhanced PWM modules, and configurable logic cells. The device operates from 1.8 V to 5.5 V (wide Vdd) and supports self-programmability for bootloader-based firmware updates. The 12-bit ADC provides up to 16 channels for sensor interfacing.
The PIC18F66K22 is built on an enhanced Harvard architecture with a modified RISC instruction set, 16-bit wide instructions, and a hardware multiplier for arithmetic-intensive tasks. Its XLP technology delivers nanoamp-level sleep currents, allowing years of operation from a single coin cell. The 64-VQFN package provides excellent thermal dissipation for sustained 64 MHz operation.
Typical applications include capacitive touch human-machine interfaces (HMI), battery-powered sensor nodes, IoT edge devices, industrial control, and automotive body/comfort modules. The wide voltage range and robust peripheral set make it a flexible platform for both consumer and industrial products.
When designing with this MCU, allocate a 0.1 uF decoupling capacitor adjacent to every Vdd pin and follow Microchip's recommended PCB layout for the VQFN exposed pad to achieve specified thermal performance. The CTMU requires careful calibration for reliable capacitive touch performance across environmental conditions.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternatif penggantian untuk PIC18F66K22-E/MR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC18F66K22-E/MR (sama faktor bentuk dan footprint) — berbeda di dalam Package, ADC, Core Architecture, Operating Temperature Range, Timers.
PIC18F66K22-I/MR
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC18F66K22T-I/MR
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC18F66K22T-E/MR
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC18F65K22-E/MR
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC18F65K90-I/MR
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC18F65K90-E/MR
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC18F66K22-E/MR Rating Maksimal & Karakteristik Listrik
| Core Architecture | PIC18 (8-bit, enhanced RISC) |
| Program Memory (Flash) | 64 KB (32K x 16) |
| Data RAM | 4 KB |
| Data EEPROM | 1 KB |
| Maximum CPU Speed | 64 MHz (16 MIPS at 4x PLL) |
| Operating Voltage | 1.8 V to 5.5 V |
| Temperature Grade | -40 C to +125 C (Extended, -E suffix) |
| I/O Pins | 54 |
| ADC | 12-bit, up to 16 channels |
| Paket | 64-pin VQFN (9x9 mm) with EP |
| Tipe Mounting | Surface Mount |
| Low-Power Technology | nanoWatt XLP |
| CTMU (Capacitive Touch) | Yes (Charge Time Measurement Unit) |
| Communication Peripherals | UART, SPI, I2C (multiple instances) |
| Self-Programming | Yes (Flash boot loader capable) |
| Status RoHS | Compliant |
Konfigurasi Pin PIC18F66K22-E/MR
| Pin produk 1 | RB5/KBI1/PWM3H/CCP5 — I/O port B bit 5; KBI interrupt; PWM3 high; CCP5 capture/compare |
| Pin produk 2 | RB4/KBI0/PWM3L — I/O port B bit 4; KBI interrupt; PWM3 low |
| Pin produk 3 | RB3/CCP2/PWM2H — I/O port B bit 3; CCP2; PWM2 high |
| Pin produk 4 | RB2/PWM2L/CANTX — I/O port B bit 2; PWM2 low; CAN TX |
| Pin produk 5 | RB1/CANRX/PWM1H — I/O port B bit 1; CAN RX; PWM1 high |
| Pin produk 6 | RB0/PWM1L — I/O port B bit 0; PWM1 low |
| Pin produk 7 | VDD — Digital supply voltage |
| Pin produk 8 | VSS — Digital ground |
| Pin produk 9 | RC7/RX1/DT1/CCP4 — I/O port C bit 7; EUSART1 RX; EUSART1 data; CCP4 |
| Pin produk 10 | RC6/TX1/CK1/PWM4H — I/O port C bit 6; EUSART1 TX; EUSART1 clock; PWM4 high |
| Pin produk 11 | RC5/PWM4L/SDO2 — I/O port C bit 5; PWM4 low; SPI2 data out |
| Pin produk 12 | RC4/SDI2/SDA2 — I/O port C bit 4; SPI2 data in; I2C2 data |
| Pin produk 13 | RC3/SCK2/SCL2 — I/O port C bit 3; SPI2 clock; I2C2 clock |
| Pin produk 14 | RC2/CCP1/PWM5H — I/O port C bit 2; CCP1; PWM5 high |
| Pin produk 15 | RC1/CCP8/PWM5L — I/O port C bit 1; CCP8; PWM5 low |
| Pin produk 16 | RC0/SOSCO — I/O port C bit 0; secondary oscillator output |
| Pin produk 17 | OSCO/CLKO/RA6 — Oscillator output; clock output; I/O port A bit 6 |
| Pin produk 18 | OSCI/CLKI/RA7 — Oscillator input; clock input; I/O port A bit 7 |
| Pin produk 19 | VDD — Digital supply voltage |
| Pin produk 20 | VSS — Digital ground |
| Pin produk 21 | RA0/AN0/ULPWU — I/O port A bit 0; analog input 0; ultra-low-power wake-up |
| Pin produk 22 | RA1/AN1 — I/O port A bit 1; analog input 1 |
| Pin produk 23 | RA2/AN2/VREF- — I/O port A bit 2; analog input 2; ADC Vref- |
| Pin produk 24 | RA3/AN3/VREF+ — I/O port A bit 3; analog input 3; ADC Vref+ |
| Pin produk 25 | RA4/T0CKI/SOSCI — I/O port A bit 4; Timer0 clock input; secondary oscillator input |
| Pin produk 26 | RA5/AN4/SS1/HLVDIN — I/O port A bit 5; analog input 4; SPI1 slave select; HLVD input |
| Pin produk 27 | RE0/AN5 — I/O port E bit 0; analog input 5 |
| Pin produk 28 | RE1/AN6 — I/O port E bit 1; analog input 6 |
| Pin produk 29 | RE2/AN7 — I/O port E bit 2; analog input 7 |
| Pin produk 30 | VDDCORE — Regulated core supply (decoupling cap) |
| Pin produk 31 | VSS — Digital ground |
| Pin produk 32 | RD0/AN8/CTED1 — I/O port D bit 0; analog input 8; CTMU edge detect 1 |
| Pin produk 33 | RD1/AN9/CTED2 — I/O port D bit 1; analog input 9; CTMU edge detect 2 |
| Pin produk 34 | RD2/AN10 — I/O port D bit 2; analog input 10 |
| Pin produk 35 | RD3/AN11 — I/O port D bit 3; analog input 11 |
| Pin produk 36 | RD4/AN12/SDO1 — I/O port D bit 4; analog input 12; SPI1 data out |
| Pin produk 37 | RD5/AN13/SDI1/SDA1 — I/O port D bit 5; analog input 13; SPI1 data in; I2C1 data |
| Pin produk 38 | RD6/AN14/SCK1/SCL1 — I/O port D bit 6; analog input 14; SPI1 clock; I2C1 clock |
| Pin produk 39 | RD7/AN15/SS1 — I/O port D bit 7; analog input 15; SPI1 slave select |
| Pin produk 40 | VSS — Digital ground |
| Pin produk 41 | VDD — Digital supply voltage |
| Pin produk 42 | RF7/AN16 — I/O port F bit 7; analog input 16 |
| Pin produk 43 | RF6/AN17 — I/O port F bit 6; analog input 17 |
| Pin produk 44 | RF5/AN18 — I/O port F bit 5; analog input 18 |
| Pin produk 45 | RF4/AN19 — I/O port F bit 4; analog input 19 |
| Pin produk 46 | RF3/AN20 — I/O port F bit 3; analog input 20 |
| Pin produk 47 | RF2/AN21 — I/O port F bit 2; analog input 21 |
| Pin produk 48 | RF1/AN22 — I/O port F bit 1; analog input 22 |
| Pin produk 49 | RF0/AN23 — I/O port F bit 0; analog input 23 |
| Pin produk 50 | RG7 — I/O port G bit 7 |
| Pin produk 51 | RG6 — I/O port G bit 6 |
| Pin produk 52 | RG5 — I/O port G bit 5 |
| Pin produk 53 | RG4 — I/O port G bit 4 |
| Pin produk 54 | RG3 — I/O port G bit 3 |
| Pin produk 55 | RG2 — I/O port G bit 2 |
| Pin produk 56 | RG1 — I/O port G bit 1 |
| Pin produk 57 | RG0 — I/O port G bit 0 |
| Pin produk 58 | RE3 — I/O port E bit 3 (input only) |
| Pin produk 59 | RE4 — I/O port E bit 4 |
| Pin produk 60 | RE5 — I/O port E bit 5 |
| Pin produk 61 | RE6 — I/O port E bit 6 |
| Pin produk 62 | RE7 — I/O port E bit 7 |
| Pin produk 63 | AVDD — Analog supply voltage |
| Pin produk 64 | AVSS — Analog ground |
Aplikasi Umum
PIC18F66K22-E/MR cocok untuk 6 aplikasis: Capacitive Touch HMI, Battery-Powered IoT Sensor Node, Industrial Control and Automation, Automotive Body and Comfort Modules, Consumer Appliance Control Boards, Medical Monitoring and Diagnostics.
Capacitive Touch HMI
The PIC18F66K22-E/MR's integrated Charge Time Measurement Unit (CTMU) provides a hardware constant-current source and precise timing reference for measuring capacitance changes, making this MCU a strong fit for capacitive touch human-machine interfaces. With 64 KB Flash, designers can implement touch button, slider, and proximity-sensor algorithms using Microchip's mTouch framework, supporting 8-16 touch channels simultaneously. The 12-bit ADC and configurable logic cells complement the CTMU for robust touch decoding in noisy industrial environments.
Direkomendasikan
Battery-Powered IoT Sensor Node
The PIC18F66K22-E/MR's nanoWatt XLP technology delivers nanoamp-level sleep currents and fast wake-up times, enabling multi-year battery life for IoT sensor endpoints. Its 64 MHz CPU (16 MIPS) allows sensor data processing and on-chip decision making without an external coprocessor, while the 12-bit ADC reads analog sensors directly. The wide 1.8 V to 5.5 V supply range accepts single-cell Li-ion, 2x AA alkaline, or energy-harvesting rails without additional regulation.
Direkomendasikan
Industrial Control and Automation
With 54 I/O pins and operating temperature range of -40 C to +125 C, the PIC18F66K22-E/MR is well suited for industrial PLC expansion modules, motor-control daughter boards, and factory automation peripherals. The multiple UART, SPI, and I2C peripherals allow simultaneous communication with sensors, displays, and fieldbus bridges. Hardware PWM and enhanced timers support closed-loop control algorithms for valves, heaters, and small servo drives.
Direkomendasikan
Automotive Body and Comfort Modules
The -E temperature grade (-40 C to +125 C) makes the PIC18F66K22-E/MR suitable for under-hood and cabin automotive body controllers, lighting modules, and HVAC interfaces. Its 64 KB Flash accommodates CAN-based stacks and LIN slave firmware. Multiple PWM channels drive LED lighting and small DC motors in seat-control and mirror-adjustment modules where the wide Vdd range tolerates load-dump transients with external protection.
Direkomendasikan
Consumer Appliance Control Boards
The PIC18F66K22-E/MR is widely deployed in white-goods and small appliance controllers such as washing-machine front panels, coffee-machine interfaces, and induction cooktop user interfaces. The CTMU enables sleek glass-surface capacitive touch buttons that replace mechanical switches, while the 12-bit ADC reads temperature, humidity, and weight sensors. Its low power consumption is well matched to standby-energy regulations worldwide.
Direkomendasikan
Medical Monitoring and Diagnostics
The PIC18F66K22-E/MR's 12-bit ADC resolution, 1 KB EEPROM for calibration constants, and reliable Flash with self-programming support enable medical monitoring peripherals such as blood-pressure meters, glucose monitors, and pulse oximeters. The XLP sleep modes extend battery life across multi-month usage scenarios between recharges. Hardware CRC and enhanced timers support safety-relevant firmware architectures.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC18F66K22-E/MR — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC18F66K22-I/MR | PIC18F66K22T-I/MR | PIC18F66K22T-E/MR | PIC18F65K22-E/MR | PIC18F65K90-I/MR | PIC18F65K90-E/MR |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-VQFN (9x9) | 64-VQFN (9x9) - same | 64-VQFN (9x9) - same | 64-VQFN (9x9) - same | 64-VQFN (9x9) - same | 64-VQFN (9x9) - same | 64-VQFN (9x9) - same |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 32 KB | 32 KB | 32 KB |
| Data RAM | 4 KB | 4 KB | 4 KB | 4 KB | 2 KB | 2 KB | 2 KB |
| EEPROM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| Temperature Grade | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +125 C (Extended) | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) | -40 C to +125 C (Extended) |
| Operating Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Max CPU Speed | 64 MHz (16 MIPS) | 64 MHz (16 MIPS) | 64 MHz (16 MIPS) | 64 MHz (16 MIPS) | 64 MHz (16 MIPS) | 64 MHz (16 MIPS) | 64 MHz (16 MIPS) |
| CTMU (Capacitive Touch) | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Diferensiator Kunci
- Extended temperature grade for automotive/harsh-environment use (vsPIC18F66K22-I/MR)
- Highest memory density in the 64-VQFN PIC18F6xK22 family (vsPIC18F65K22-E/MR)
- Integrated CTMU for capacitive touch (vsPIC18F65K90-E/MR)
Catatan Desain
Decouple each Vdd pin with a 100 nF ceramic capacitor placed within 5 mm of the pin, and add a bulk 10 uF tantalum or ceramic capacitor near the package. For the VDDCORE pin (pin 30), follow Microchip's reference layout exactly: a 100 nF low-ESR ceramic capacitor must connect directly between VDDCORE and the nearest VSS pin. Insufficient VDDCORE decoupling can cause erratic CPU behavior at 64 MHz operation.
Estimated: At 64 MHz CPU speed, 5.5 V supply, and 50% I/O toggle load, the PIC18F66K22-E/MR dissipates approximately 50 mW typical, well within the 64-VQFN thermal envelope. The exposed pad (EP) on the package underside MUST be soldered to a copper pad of at least 50 mm^2 with multiple thermal vias to the inner ground plane to achieve the datasheet thermal resistance (theta_JA approximately 30 C/W). Without EP soldering, junction temperature rises rapidly and may exceed the +125 C maximum at extended ambient temperatures.
Avoid common pitfalls: (1) Do not exceed 5.5 V on any digital I/O pin - use clamping diodes for load-dump protection in automotive applications. (2) The CTMU constant-current source requires calibration per chip for accurate capacitance measurement; Microchip AN1250 documents the calibration procedure. (3) Flash self-programming requires specific erase/write sequences and the CONFIG bits must enable LVP or enter high-voltage programming mode correctly.
Route the high-speed signals (SPI, EUSART, PWM) above a continuous ground plane and avoid 90-degree bends. Place the analog reference pins AVdd/AVss adjacent to a quiet ground island separated by a small ferrite bead from the digital ground to reduce ADC reference noise. Trace lengths for the 16 MHz crystal (or external oscillator) should be minimized and surrounded by a grounded guard ring to suppress EMI pickup.
Informasi Konformitas
RoHS compliant per Microchip product page. The -E temperature grade (-40 C to +125 C) is suitable for many industrial/automotive applications but is NOT AEC-Q100 qualified; for AEC-Q100 automotive designs, see PIC18F46K80 or qualified K-series parts.
