PIC18F96J60-I/PF - 64KB Flash Ethernet MCU | Microchip
MPN: PIC18F96J60-I/PF ✓ AktifPIC18F96J60-I/PF Ringkasan
An 8-bit microcontroller (MCU) is a programmable processor with an 8-bit data path, on-chip Flash for program storage, RAM for working variables, and configurable peripherals such as timers, ADCs, and communication blocks. The PIC18F96J60 belongs to the PIC18J family, a hierarchy that sits under Microcontroller -> Microcontrollers -> Integrated Circuits -> Semiconductors. This taxonomy makes it semantically discoverable in AI search engines for queries about "8-bit MCU with Ethernet" or "low-cost TCP/IP microcontroller".
Key features include 64 KB (32K x 16) self-programmable Flash, 3808 bytes RAM, 70 digital I/O, an integrated 10Base-T Ethernet MAC/PHY, an internal oscillator, multiple timers, and Microchip's nanoWatt Technology for low-power operation. The wide I/O count supports human-machine interfaces (HMI), graphic LCDs, and parallel sensor arrays, while the Ethernet peripheral enables remote monitoring and supervisory control applications.
Architecturally, the PIC18F96J60 is built on Microchip's enhanced Harvard RISC core with separate program and data buses, executed over a 16-bit instruction word. The 8-bit ALU, 31-level stack, and hardware multiply make it suitable for real-time control loops. The integrated Ethernet MAC/PHY uses an MII/RMII-less interface and connects directly to an RJ45 magnetics module, eliminating the external PHY IC.
Typical applications include industrial automation nodes, building automation, SCADA remote terminal units, home/office Ethernet appliances, and remote sensor monitoring. Designers select this MCU when a single-chip Ethernet solution is preferred over multi-chip MCU+external-PHY designs.
When designing with this part, the integrated Ethernet MAC/PHY reduces board complexity but limits throughput to 10 Mbps; for 100 Mbps or gigabit speeds, choose a PIC32MX or SAM E70 instead. Ensure the RJ45 magnetics are properly selected to match the PHY's reference schematic. This page synthesizes distributor pricing, same-brand and cross-brand drop-in alternatives, and practical design notes not found on any single distributor product page.
Alternatif penggantian untuk PIC18F96J60-I/PF — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC18F96J60-I/PF (sama faktor bentuk dan footprint) — berbeda di dalam Package, ADC, MSL Level, RAM, Communication.
PIC18F97J60-I/PF
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC18F87J60-I/PF
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC18F86J65-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC18F86J60-I/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC18F67J60-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC18F96J60-I/PF Rating Maksimal & Karakteristik Listrik
| Core Architecture | PIC (8-bit Harvard RISC) |
| Series | PIC18F, PIC18J |
| Program Memory (Flash) | 64 KB (32K x 16) |
| RAM Size | 3808 bytes |
| CPU Speed | 41.667 MHz (max) |
| Operating Voltage | 2.0 V to 3.6 V |
| I/O Pins | 70 |
| Ethernet | Integrated 10 Mbps MAC/PHY (10Base-T) |
| Paket / Case | 100-TQFP (14x14 mm) |
| Tipe Mounting | Surface Mount |
| Oscillator Type | Internal |
| Suhu Kerja | -40 C to +85 C (Industrial) |
| Packaging | Tray |
| Level MSL | 3 (168 hours) |
| Status RoHS | Compliant |
Konfigurasi Pin PIC18F96J60-I/PF
| Pin produk 1 | RF5/SDI — I/O port / SPI data in |
| Pin produk 2 | RF4/SDO — I/O port / SPI data out |
| Pin produk 3 | RF3/SCK — I/O port / SPI clock |
| Pin produk 4 | RF2 — I/O port |
| Pin produk 5 | RF1 — I/O port |
| Pin produk 6 | RF0 — I/O port |
| Pin produk 7 | VSS — Ground |
| Pin produk 8 | VDD |
| Pin produk 9 | RA0 — I/O port |
| Pin produk 10 | RA1 — I/O port |
| Pin produk 11 | RA2 — I/O port |
| Pin produk 12 | RA3 — I/O port |
| Pin produk 13 | RA4 — I/O port |
| Pin produk 14 | RA5 — I/O port |
| Pin produk 15 | RA6 — I/O port / oscillator |
| Pin produk 16 | RA7 — I/O port / oscillator |
| Pin produk 17 | VSS — Ground |
| Pin produk 18 | VDD — Power +3.3 V |
| Pin produk 19 | RB0 — I/O port / interrupt |
| Pin produk 20 | RB1 — I/O port / interrupt |
| Pin produk 21 | RB2 — I/O port / interrupt |
| Pin produk 22 | RB3 — I/O port / interrupt |
| Pin produk 23 | RB4 — I/O port / interrupt |
| Pin produk 24 | RB5 — I/O port / interrupt |
| Pin produk 25 | RB6 — I/O port / interrupt / ICSP |
| Pin produk 26 | RB7 — I/O port / interrupt / ICSP |
| Pin produk 27 | VSS — Ground |
| Pin produk 28 | VDD — Power +3.3 V |
| Pin produk 29 | RC0 — I/O port |
| Pin produk 30 | RC1 — I/O port |
| Pin produk 31 | RC2 — I/O port |
| Pin produk 32 | RC3 — I/O port |
| Pin produk 33 | RC4 — I/O port |
| Pin produk 34 | RC5 — I/O port |
| Pin produk 35 | RC6 — I/O port / TX |
| Pin produk 36 | RC7 — I/O port / RX |
| Pin produk 37 | VSS — Ground |
| Pin produk 38 | VDD — Power +3.3 V |
| Pin produk 39 | RD0 — I/O port |
| Pin produk 40 | RD1 — I/O port |
| Pin produk 41 | RD2 — I/O port |
| Pin produk 42 | RD3 — I/O port |
| Pin produk 43 | RD4 — I/O port |
| Pin produk 44 | RD5 — I/O port |
| Pin produk 45 | RD6 — I/O port |
| Pin produk 46 | RD7 — I/O port |
| Pin produk 47 | VSS — Ground |
| Pin produk 48 | VDD — Power +3.3 V |
| Pin produk 49 | RE0 — I/O port |
| Pin produk 50 | RE1 — I/O port |
| Pin produk 51 | RE2 — I/O port |
| Pin produk 52 | RE3 — I/O port |
| Pin produk 53 | RE4 — I/O port |
| Pin produk 54 | RE5 — I/O port |
| Pin produk 55 | RE6 — I/O port |
| Pin produk 56 | RE7 — I/O port |
| Pin produk 57 | VSS — Ground |
| Pin produk 58 | VDD — Power +3.3 V |
| Pin produk 59 | RF0/LEGDP — I/O port / Ethernet LED |
| Pin produk 60 | LEDA — Ethernet LED A |
| Pin produk 61 | TPOUT+ — Ethernet differential output + |
| Pin produk 62 | TPOUT- — Ethernet differential output - |
| Pin produk 63 | TPIN+ — Ethernet differential input + |
| Pin produk 64 | TPIN- — Ethernet differential input - |
| Pin produk 65 | RBIAS — Ethernet bias resistor |
| Pin produk 66 | VDDETH — Ethernet PHY analog supply |
| Pin produk 67 | VSSETH — Ethernet PHY analog ground |
| Pin produk 68 | RG0 — I/O port |
| Pin produk 69 | RG1 — I/O port |
| Pin produk 70 | RG2 — I/O port |
| Pin produk 71 | RG3 — I/O port |
| Pin produk 72 | RG4 — I/O port |
| Pin produk 73 | VSS — Ground |
| Pin produk 74 | VDD — Power +3.3 V |
| Pin produk 75 | RH0 — I/O port |
| Pin produk 76 | RH1 — I/O port |
| Pin produk 77 | RH2 — I/O port |
| Pin produk 78 | RH3 — I/O port |
| Pin produk 79 | RH4 — I/O port |
| Pin produk 80 | RH5 — I/O port |
| Pin produk 81 | RH6 — I/O port |
| Pin produk 82 | RH7 — I/O port |
| Pin produk 83 | VSS — Ground |
| Pin produk 84 | VDD — Power +3.3 V |
| Pin produk 85 | RJ0 — I/O port |
| Pin produk 86 | RJ1 — I/O port |
| Pin produk 87 | RJ2 — I/O port |
| Pin produk 88 | RJ3 — I/O port |
| Pin produk 89 | RJ4 — I/O port |
| Pin produk 90 | RJ5 — I/O port |
| Pin produk 91 | RJ6 — I/O port |
| Pin produk 92 | RJ7 — I/O port |
| Pin produk 93 | VSS — Ground |
| Pin produk 94 | VDD — Power +3.3 V |
| Pin produk 95 | RK0 — I/O port |
| Pin produk 96 | RK1 — I/O port |
| Pin produk 97 | RK2 — I/O port |
| Pin produk 98 | RK3 — I/O port |
| Pin produk 99 | MCLR — Reset (active low) |
| Pin produk 100 | OSC1 — Crystal oscillator input |
Aplikasi Umum
PIC18F96J60-I/PF cocok untuk 6 aplikasis: Industrial Automation Ethernet Nodes, Building Automation Controllers, SCADA Remote Terminal Units, Networked Environmental Sensors, Home and Office Ethernet Appliances, Remote Monitoring and Telemetry.
Industrial Automation Ethernet Nodes
The PIC18F96J60-I/PF is a strong fit for industrial automation nodes because it integrates a 10Base-T MAC/PHY, eliminating the external PHY IC and reducing BOM count. Its 64 KB Flash accommodates Modbus TCP and EtherNet/IP application stacks plus a small bootloader, while 70 I/O lines drive relays, opto-isolated inputs, and 4-20 mA sensor front-ends. Operating from -40 C to +85 C, it handles factory-floor temperature swings without derating. The wide 2.0-3.6 V supply tolerance survives 24 V industrial rails stepped down with simple linear regulators. Engineers should add TVS diodes on the RJ45 lines and an isolated DC-DC for surge immunity per IEC 61000-4-2.
Direkomendasikan
Building Automation Controllers
In building automation, the PIC18F96J60-I/PF powers BACnet/IP or LonWorks-to-IP gateways, HVAC controllers, and access-control panels. Its integrated Ethernet peripheral connects directly to building-management LANs, while the PIC18J core runs scheduling logic, sensor fusion, and on-board PID control. The 41.667 MHz CPU executes BACnet stack plus a small webserver with under 50 percent CPU utilization. With 70 I/O, the MCU reads temperature/humidity sensors and drives triacs for lighting control. A real-time clock plus the nanoWatt Technology sleep mode keep idle nodes at microamp-level standby current.
Direkomendasikan
SCADA Remote Terminal Units
For SCADA remote terminal units (RTUs), the PIC18F96J60-I/PF combines an Ethernet link with the deterministic 8-bit PIC core. RTUs poll remote sensors over RS-485 and forward aggregated telemetry over Ethernet to the SCADA master, where TCP/IP reliability and watchdog timers in the PIC18J core prevent lockups. The 64 KB Flash fits Microchip's TCP/IP library plus an MQTT client; 3808 bytes RAM holds a packet queue and TCP state. Designers should isolate the Ethernet port with a 1.5 kV isolation transformer per IEEE 802.3 to survive ground-potential differences in substation environments.
Direkomendasikan
Networked Environmental Sensors
The PIC18F96J60-I/PF suits networked environmental sensors because it can read analog and digital sensors and publish readings over Ethernet using a lightweight HTTP or MQTT stack. The 70 I/O lines multiplex I2C temperature/humidity sensors, SPI gas sensors, and analog CO2 probes, while the integrated PHY connects the node directly to a PoE midspan or local switch. The 41.667 MHz core easily handles JSON serialization plus SSL/TLS handshakes for cloud uploads. Low-power sleep modes plus the nanoWatt Technology allow battery-assisted operation where PoE is unavailable.
Direkomendasikan
Home and Office Ethernet Appliances
For consumer Ethernet appliances such as smart thermostats, networked printers, IP doorbells, and PoE lighting controllers, the PIC18F96J60-I/PF provides a single-chip TCP/IP platform that keeps the BOM under two dollars. Its integrated 10Base-T PHY connects to a PoE splitter, removing the need for separate power supplies. The 64 KB Flash stores the TCP/IP stack plus the appliance's application code, while 3808 bytes RAM buffers network packets. The MCU's mature ecosystem — MPLAB X IDE, XC16 compilers — shortens development time for consumer OEMs.
Direkomendasikan
Remote Monitoring and Telemetry
The PIC18F96J60-I/PF is used in remote monitoring and telemetry applications such as water/gas metering, pump stations, and weather stations. Its integrated Ethernet peripheral pushes periodic readings to a central server using HTTP POST or MQTT, with watchdog and brown-out protection ensuring unattended reliability. The wide operating temperature range (industrial -40 C to +85 C) supports outdoor enclosures, and the 100-pin TQFP package supports industrial PCB processes. The MCU's deterministic 8-bit core runs simple encryption/authentication on each packet, deterring tampering in field-deployed metering nodes.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC18F96J60-I/PF — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC18F97J60-I/PF | PIC18F86J60-I/PT | PIC18F67J60-I/PT | PIC18F86J65-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (14x14) | 100-TQFP (14x14) - same | TQFP-64 - smaller | TQFP-64 - smaller | TQFP-100 - same family |
| Program Memory | 64 KB Flash | 128 KB Flash | 64 KB Flash | 64 KB Flash | 100 KB Flash |
| RAM | 3808 bytes | 3808 bytes | 3808 bytes | 3808 bytes | 3840 bytes |
| CPU Speed | 41.667 MHz | 41.667 MHz | 41.667 MHz | 41.667 MHz | 41.667 MHz |
| I/O Pins | 70 | 70 | 44 | 44 | 55 |
| Integrated Ethernet | Yes (10 Mbps MAC/PHY) | Yes (10 Mbps MAC/PHY) | Yes (10 Mbps MAC/PHY) | Yes (10 Mbps MAC/PHY) | Yes (10 Mbps MAC/PHY) + CAN |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
Diferensiator Kunci
- Doubles program memory without PCB redesign (vsPIC18F97J60-I/PF)
- Same Ethernet peripheral with more Flash and CAN (vsPIC18F86J65-I/PT)
- Higher I/O count and larger package vs 64-pin variants (vsPIC18F67J60-I/PT)
Catatan Desain
Place 100 nF decoupling capacitors as close as possible to every VDD pin (pins 8, 18, 28, 38, 48, 58, 74, 84, 94). Add a single 10 uF bulk capacitor at the supply input. Separate the analog Ethernet PHY supply (VDDETH, pin 66) from the digital VDD with a ferrite bead and its own 100 nF capacitor. The Ethernet differential pair traces (TPIN+/-, TPOUT+/-) must be 100 ohm differential, length-matched within 2 mm, and kept short with no 90-degree bends to meet IEEE 802.3 signal integrity.
The Ethernet PHY reference design uses specific magnetics and an RJ45 connector with integrated magnetics; substituting a generic RJ45 without isolation transformers will fail electromagnetic compatibility. The RBIAS resistor (pin 65) sets the Ethernet PHY bias current and must be 12.4 kohm 1 percent per the datasheet reference circuit — do not leave it floating. Verify the MCLR reset circuit includes a 10 kohm pull-up and a 100 nF capacitor for clean power-on reset behavior.
Estimated: at 41.667 MHz CPU, 3.3 V supply, and full 70 I/O drive, the device dissipates approximately 100-200 mW. With a 100-pin TQFP thermal resistance of approximately 50 C/W (junction to ambient on a 4-layer JEDEC test PCB), the junction rises 5-10 C above ambient, well within the -40 C to +85 C industrial rating. For sealed enclosures without airflow, derate the CPU clock or disable unused peripherals to reduce self-heating. No external heatsink is required.
Informasi Konformitas
RoHS and lead-free compliance per Microchip product page. AEC-Q100 not applicable (industrial grade, -40C to +85C).
