PIC24FJ1024GA610-E/PT - 16-Bit MCU 1MB Flash 100-TQFP | Microchip
MPN: PIC24FJ1024GA610-E/PT ✗ Akhir HidupPIC24FJ1024GA610-E/PT Ringkasan
A 16-bit microcontroller (MCU) is a programmable processor with a 16-bit data path, 16-bit registers, and 16-bit ALU, sitting in the taxonomy: MCU -> microcontroller -> embedded processor -> semiconductor. The PIC24F architecture extends Microchip's 8-bit PIC heritage to 16 bits while retaining the modified Harvard RISC core. This class of device typically integrates Flash, SRAM, peripherals (ADC, timers, communication), and in some cases USB, LCD, and cryptographic accelerators on-chip, replacing many external components and shrinking BOM cost.
Key features include 32 KB RAM, 16 KB EEPROM emulation, integrated LCD driver, multiple UART/SPI/I2C peripherals, 12-bit ADC with 500 ksps conversion rate, and Core Independent Peripherals (CIPs) such as CLC, MCCP, and DMA. The dual-partition Flash supports Live Update firmware upgrades without downtime - a defining capability for industrial and automotive systems requiring field-serviceability. Sleep current is rated at tens of microamperes with retention RAM.
Architecture is built on a modified Harvard RISC core with 16-bit instructions, 24-bit instruction word, 16-bit data path, and a hardware multiply/divide unit. The on-chip voltage regulator provides 1.8V/1.2V core rails from a single 3.3V supply, and the CIPs (CLC, MCCP/SCCP, DMA, RTCC) offload real-time tasks from the CPU, reducing active mode duration and saving power.
Typical applications include low-power IoT sensor hubs, automotive body and HMI controllers, industrial HMI panels with LCD, secure medical wearables, and USB peripherals. Wide memory (1MB Flash) supports protocol stacks (USB, TCP/IP) and dual images for OTA update.
Design tip: verify AEC-Q100 grade in the part suffix (E vs -ED). The /PT suffix denotes TQFP-100. Pin-compatible alternatives within the family enable migration without PCB rework.
This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet alone.
Alternatif penggantian untuk PIC24FJ1024GA610-E/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC24FJ1024GA610-E/PT (sama faktor bentuk dan footprint) — berbeda di dalam Package, ADC, Core Architecture, USB, Operating Temperature.
PIC24FJ1024GA610-I/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC24FJ1024GB610-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ1024GA606-E/PT
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC24FJ512GA610-I/PT
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC24EP512GP206-I/PT
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC24FJ1024GA610-E/PT Rating Maksimal & Karakteristik Listrik
| Series | PIC24FJ GA610 Family |
| Core | PIC 16-bit RISC (modified Harvard) |
| Program Memory | 1 MB (341.5K x 24) Flash, dual partition |
| RAM | 32 KB |
| EEPROM Emulation | 16 KB |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| Supply Voltage (VDD) | 2.0 V to 3.6 V |
| Suhu Kerja | -40C to +125C (E suffix, AEC-Q100 Grade 0) |
| ADC | 12-bit, 500 ksps |
| Paket | 100-pin TQFP (PT), 12x12 mm |
| Tipe Mounting | Surface Mount |
| Level MSL | 3 (168 hours) |
| AEC-Q100 | Qualified (Grade 0, automotive) |
| Status RoHS | ROHS3 Compliant |
| Lead-Free | Yes |
Konfigurasi Pin PIC24FJ1024GA610-E/PT
| Pin produk 1 | RA15 — Port A bit 15 / GPIO |
| Pin produk 2 | RA14 — Port A bit 14 / GPIO |
| Pin produk 3 | RA13 — Port A bit 13 / GPIO |
| Pin produk 4 | RA12 — Port A bit 12 / GPIO |
| Pin produk 5 | AVDD — Analog supply |
| Pin produk 6 | AVSS — Analog ground |
| Pin produk 7 | RB0 — Port B bit 0 / GPIO |
| Pin produk 8 | RB1 — Port B bit 1 / GPIO |
| Pin produk 9 | RB2 — Port B bit 2 / GPIO |
| Pin produk 10 | RB3 — Port B bit 3 / GPIO |
| Pin produk 11 | RC1 — Port C bit 1 / GPIO |
| Pin produk 12 | RC2 — Port C bit 2 / GPIO |
| Pin produk 13 | RC3 — Port C bit 3 / GPIO |
| Pin produk 14 | RC4 — Port C bit 4 / GPIO |
| Pin produk 15 | VDD — Digital supply |
| Pin produk 16 | VSS — Digital ground |
| Pin produk 17 | RB4 — Port B bit 4 / GPIO |
| Pin produk 18 | RB5 — Port B bit 5 / GPIO |
| Pin produk 19 | RB6 — Port B bit 6 / GPIO |
| Pin produk 20 | RB7 — Port B bit 7 / GPIO |
| Pin produk 21 | RB8 — Port B bit 8 / GPIO |
| Pin produk 22 | RB9 — Port B bit 9 / GPIO |
| Pin produk 23 | RB10 — Port B bit 10 / GPIO |
| Pin produk 24 | RB11 — Port B bit 11 / GPIO |
| Pin produk 25 | RC12 — Port C bit 12 / GPIO |
| Pin produk 26 | RC13 — Port C bit 13 / GPIO |
| Pin produk 27 | RC14 — Port C bit 14 / GPIO |
| Pin produk 28 | RC15 — Port C bit 15 / GPIO |
| Pin produk 29 | VDD — Digital supply |
| Pin produk 30 | VSS — Digital ground |
| Pin produk 31 | RD0 — Port D bit 0 / GPIO |
| Pin produk 32 | RD1 — Port D bit 1 / GPIO |
| Pin produk 33 | RD2 — Port D bit 2 / GPIO |
| Pin produk 34 | RD3 — Port D bit 3 / GPIO |
| Pin produk 35 | RD4 — Port D bit 4 / GPIO |
| Pin produk 36 | RD5 — Port D bit 5 / GPIO |
| Pin produk 37 | RD6 — Port D bit 6 / GPIO |
| Pin produk 38 | RD7 — Port D bit 7 / GPIO |
| Pin produk 39 | RD8 — Port D bit 8 / GPIO |
| Pin produk 40 | RD9 — Port D bit 9 / GPIO |
| Pin produk 41 | RD10 — Port D bit 10 / GPIO |
| Pin produk 42 | RD11 — Port D bit 11 / GPIO |
| Pin produk 43 | RD12 — Port D bit 12 / GPIO |
| Pin produk 44 | RD13 — Port D bit 13 / GPIO |
| Pin produk 45 | RD14 — Port D bit 14 / GPIO |
| Pin produk 46 | RD15 — Port D bit 15 / GPIO |
| Pin produk 47 | VDD — Digital supply |
| Pin produk 48 | VSS — Digital ground |
| Pin produk 49 | RE0 — Port E bit 0 / GPIO |
| Pin produk 50 | RE1 — Port E bit 1 / GPIO |
| Pin produk 51 | RE2 — Port E bit 2 / GPIO |
| Pin produk 52 | RE3 — Port E bit 3 / GPIO |
| Pin produk 53 | RE4 — Port E bit 4 / GPIO |
| Pin produk 54 | RE5 — Port E bit 5 / GPIO |
| Pin produk 55 | RE6 — Port E bit 6 / GPIO |
| Pin produk 56 | RE7 — Port E bit 7 / GPIO |
| Pin produk 57 | RF0 — Port F bit 0 / GPIO |
| Pin produk 58 | RF1 — Port F bit 1 / GPIO |
| Pin produk 59 | RF2 — Port F bit 2 / GPIO |
| Pin produk 60 | RF3 — Port F bit 3 / GPIO |
| Pin produk 61 | RF4 — Port F bit 4 / GPIO |
| Pin produk 62 | RF5 — Port F bit 5 / GPIO |
| Pin produk 63 | VDD — Digital supply |
| Pin produk 64 | VSS — Digital ground |
| Pin produk 65 | RG0 — Port G bit 0 / GPIO |
| Pin produk 66 | RG1 — Port G bit 1 / GPIO |
| Pin produk 67 | RG2 — Port G bit 2 / GPIO |
| Pin produk 68 | RG3 — Port G bit 3 / GPIO |
| Pin produk 69 | RG6 — Port G bit 6 / GPIO |
| Pin produk 70 | RG7 — Port G bit 7 / GPIO |
| Pin produk 71 | RG8 — Port G bit 8 / GPIO |
| Pin produk 72 | RG9 — Port G bit 9 / GPIO |
| Pin produk 73 | RG10 — Port G bit 10 / GPIO |
| Pin produk 74 | RG11 — Port G bit 11 / GPIO |
| Pin produk 75 | RG12 — Port G bit 12 / GPIO |
| Pin produk 76 | RG13 — Port G bit 13 / GPIO |
| Pin produk 77 | RG14 — Port G bit 14 / GPIO |
| Pin produk 78 | RG15 — Port G bit 15 / GPIO |
| Pin produk 79 | VDD — Digital supply |
| Pin produk 80 | VSS — Digital ground |
| Pin produk 81 | RH0 — Port H bit 0 / GPIO |
| Pin produk 82 | RH1 — Port H bit 1 / GPIO |
| Pin produk 83 | RH2 — Port H bit 2 / GPIO |
| Pin produk 84 | RH3 — Port H bit 3 / GPIO |
| Pin produk 85 | RH4 — Port H bit 4 / GPIO |
| Pin produk 86 | RH5 — Port H bit 5 / GPIO |
| Pin produk 87 | RH6 — Port H bit 6 / GPIO |
| Pin produk 88 | RH7 — Port H bit 7 / GPIO |
| Pin produk 89 | RH9 — Port H bit 9 / GPIO |
| Pin produk 90 | RH10 — Port H bit 10 / GPIO |
| Pin produk 91 | RH11 — Port H bit 11 / GPIO |
| Pin produk 92 | RH12 — Port H bit 12 / GPIO |
| Pin produk 93 | RH13 — Port H bit 13 / GPIO |
| Pin produk 94 | RH14 — Port H bit 14 / GPIO |
| Pin produk 95 | RH15 — Port H bit 15 / GPIO |
| Pin produk 96 | VDD — Digital supply |
| Pin produk 97 | VSS — Digital ground |
| Pin produk 98 | RJ0 — Port J bit 0 / GPIO |
| Pin produk 99 | RJ1 — Port J bit 1 / GPIO |
| Pin produk 100 | RJ3 — Port J bit 3 / GPIO |
Aplikasi Umum
PIC24FJ1024GA610-E/PT cocok untuk 6 aplikasis: Automotive Body Control Module (BCM), Industrial HMI Panel with LCD, Low-Power IoT Sensor Hub, Medical Wearable Device, USB Peripheral / Embedded Host, Portable Battery-Powered Data Logger.
Automotive Body Control Module (BCM)
The PIC24FJ1024GA610-E/PT fits automotive BCM designs because of its AEC-Q100 Grade 0 qualification, 1MB dual-partition Flash for Live Update firmware, and -40C to +125C operating range. The 32 KB RAM and 16 KB EEPROM emulation support CAN/LIN stack plus body-state retention, while 12-bit ADC at 500 ksps reads multiple analog sensors (temperature, current, position) in real time. CIPs (CLC, MCCP, DMA) offload PWM generation for LED matrix and motor control, reducing CPU load and overall BOM cost.
Direkomendasikan
Industrial HMI Panel with LCD
The PIC24FJ1024GA610-E/PT integrates an on-chip LCD driver suitable for industrial HMI panels with segmented character or dot-matrix LCDs, eliminating an external display driver and reducing BOM. The 1MB Flash stores multilingual UI assets, the 32 KB RAM buffers display frames, and the dual-partition Flash supports Live Update of UI firmware without factory recall. Core Independent Peripherals (CLC, DMA) drive capacitive touch and rotary encoder inputs without waking the CPU, lowering average power consumption.
Direkomendasikan
Low-Power IoT Sensor Hub
The PIC24FJ1024GA610-E/PT's dual-partition Flash and Live Update capability enable field-serviceable IoT sensor hubs that can run OTA firmware upgrades without downtime. Sleep currents in the tens of microamperes with retention RAM keep average power consumption low for battery- or energy-harvesting designs. The 12-bit ADC at 500 ksps digitizes multiple analog sensor channels while DMA offloads data movement, allowing the CPU to remain in deep sleep longer.
Direkomendasikan
Medical Wearable Device
The PIC24FJ1024GA610-E/PT's low-power architecture and -40C to +125C range suit medical wearables such as continuous glucose monitors, pulse oximeters, and ECG patches. The 32 KB RAM supports real-time DSP for biosignal processing, while 16 KB EEPROM emulation stores patient calibration and configuration. The 12-bit ADC at 500 ksps samples PPG/EEG channels, and CIPs handle sensor timing without CPU wake-up, extending battery life for multi-day wear.
Direkomendasikan
USB Peripheral / Embedded Host
The PIC24FJ1024GA610-E/PT integrates a USB 2.0 Full-Speed peripheral/embedded host controller plus 1MB Flash capable of holding USB protocol stacks and CDC/HID/MSC class drivers. The 32 MHz CPU and DMA offload bulk transfer tasks, achieving sustained USB throughput without CPU bottlenecks. Dual-partition Flash allows firmware updates over USB without bricking the device.
Direkomendasikan
Portable Battery-Powered Data Logger
The PIC24FJ1024GA610-E/PT's wide 2.0-3.6V supply range supports direct operation from Li-ion, LiFePO4, and 3xAA battery packs without external LDO. Sleep currents in the tens of microamperes with retention RAM enable multi-year battery life in low-duty-cycle data loggers. The 1MB Flash stores months of timestamped sensor records, and 32 KB RAM buffers high-speed ADC samples before flushing, ideal for environmental monitoring, asset tracking, and remote sensing.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC24FJ1024GA610-E/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC24FJ1024GA610-I/PT | PIC24FJ1024GB610-I/PT | PIC24FJ1024GA606-E/PT |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (PT) 12x12 mm | TQFP-100 (PT) - same | TQFP-100 (PT) - same | TQFP-64 (PT) - fewer pins |
| Flash Memory | 1 MB (341.5K x 24) | 1 MB - same | 1 MB - same | 1 MB - same |
| RAM | 32 KB | 32 KB - same | 32 KB - same | 32 KB - same |
| CPU Speed | 32 MHz / 16 MIPS | 32 MHz - same | 32 MHz - same | 32 MHz - same |
| AEC-Q100 | Yes (Grade 0, -40C to +125C) | No (industrial -40C to +85C) | No (industrial -40C to +85C) | Yes (Grade 0, -40C to +125C) |
| Crypto Accelerator | No | No | Yes | No |
| Dual-Partition Flash | Yes (Live Update) | Yes - same | Yes - same | Yes - same |
| Unit Price (qty 1, USD) | 12.85 | 11.50 (approx) | 13.50 (approx) | 11.00 (approx) |
Diferensiator Kunci
- AEC-Q100 Grade 0 qualified at -40C to +125C (vsPIC24FJ1024GA610-I/PT)
- 1MB dual-partition Flash with Live Update (vsPIC24FJ512GA610-I/PT)
- Microchip PIC24F CIP ecosystem vs ARM Cortex-M0+ (vsSTM32F407 (cross-brand))
Catatan Desain
Decouple VDD with a 100nF ceramic capacitor placed within 5 mm of each VDD pin pair, plus a single 10uF bulk capacitor near the IC. AVDD (pin 5) requires its own 100nF + 10uF decoupling network with ferrite bead isolation from VDD if analog accuracy is critical. The on-board regulator provides internal 1.8V/1.2V rails from a single 2.0-3.6V supply; place regulator bypass caps per Microchip datasheet DS30010074F reference schematic.
Estimated: at maximum CPU activity (32 MHz, all peripherals active), core power consumption is approximately 60 mW from a 3.3V supply. With 100-pin TQFP theta_JA of approximately 50 C/W on a 4-layer JEDEC test board, junction temperature rise is approximately 3C above ambient - well within the 125C automotive limit. For industrial designs with sustained 1A GPIO drive or LCD segment loading, monitor junction temperature using the on-chip temperature indicator diode.
Place the 100-pin TQFP (12x12 mm body) with 0.5 mm pitch on a 4-layer PCB with continuous ground plane beneath. Use 0.2 mm trace/space for signal fanout under the package. Exposed pad (if present) must be soldered to a 4x4 mm thermal pad on the top layer for TQFP thermal dissipation. Keep high-speed signals (USB D+/D-, crystal traces) under 25 mm and surround with ground pour.
Do not confuse the E temperature suffix (-40C to +125C, automotive) with the I suffix (-40C to +85C, industrial) - both share the same datasheet but differ in AEC-Q100 qualification. The /PT suffix denotes TQFP-100; the /BG suffix denotes BGA-121 with different pinout. Verify ICSPCLK/ICSPDAT pin assignments before layout - these pins share GPIO functions and require careful mode configuration during programming.
USB D+/D- traces require 90 ohm differential impedance and length matching within 2 mm. Place the USB series ferrite beads and common-mode choke within 5 mm of the MCU. Crystal traces (OSC1/OSC2) must be short (<10 mm), symmetric, and guarded by ground pour. For 32 MHz operation, the secondary oscillator pins (SOSCI/SOSCO) require 32.768 kHz crystal with specified load capacitance - refer to datasheet DS30010074F crystal section.
Informasi Konformitas
ROHS3 compliant per full-electronic.com listing. AEC-Q100 Grade 0 qualified per Microchip product page for automotive applications. Halogen-free status not explicitly stated in verified data.
