PIC24FJ1024GA610T-I/PT - 16-bit 32MHz MCU, 1MB Flash, 100-TQFP | Microchip
MPN: PIC24FJ1024GA610T-I/PT ✓ AktifPIC24FJ1024GA610T-I/PT Ringkasan
An MCU (microcontroller) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a rich set of peripherals (timers, ADC, communication controllers, GPIO). The PIC24FJ family combines a 16-bit modified Harvard CPU with Microchip's eXtreme Low Power (XLP) technology and a wide operating voltage range. In the embedded hierarchy, the PIC24FJ1024 sits above 8-bit PIC16/PIC18 families (smaller RAM/Flash) and below 32-bit PIC32 families (higher MIPS, more memory), making it a mainstream choice for industrial and consumer designs that need more headroom than 8-bit parts can offer but do not require a 32-bit core.
Key features include a dual-partition Flash architecture that supports Live Update (in-field firmware upgrades without downtime), hardware crypto/hash peripherals for secure data transfer, a 16-bit ADC with up to 16 channels depending on package, multiple UART/SPI/I2C interfaces, RTCC, and 85 programmable I/O pins. The wide 2.0V to 3.6V operating range and low-power sleep modes with RTCC retention suit battery-powered designs.
The dual-partition Flash with Live Update is the architectural differentiator: while one partition runs application code, the other can be reprogrammed, then the device swaps partitions with a software-controlled reset. This enables firmware updates without a bootloader-in-RAM workaround. Hardware crypto engines (AES, SHA, MD5) offload secure communication, reducing firmware complexity.
Typical applications include industrial sensor hubs, portable medical/fitness devices, USB peripherals, home automation controllers, and battery-powered IoT nodes. The 1 MB Flash supports graphical LCD interfaces, multiple communication stacks, and over-the-air (OTA) update buffers. Designers can prototype with the PIC24FJ1024GB610 Plug-in Module on the Explorer 16 Development Board.
Design consideration: place a 10 uF bulk plus 0.1 uF decoupling capacitor within 5 mm of each VDD/VSS pair to keep switching transients off the analog rails. Use Microchip's MPLAB X IDE with MPLAB XC16 compiler for code development.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer or distributor page.
Alternatif penggantian untuk PIC24FJ1024GA610T-I/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC24FJ1024GA610T-I/PT (sama faktor bentuk dan footprint) — berbeda di dalam Package, Core, USB, Operating Temperature, ADC.
PIC24FJ1024GA610-I/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC24FJ1024GB610T-I/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC24FJ1024GA610-E/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ1024GB610-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ1024GA610T-I/BG
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC24FJ1024GB610T-I/PF
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC24FJ1024GA610T-I/PT Rating Maksimal & Karakteristik Listrik
| Product Family | PIC® 24F |
| Core | 16-bit PIC24 RISC (modified Harvard) |
| Maximum CPU Speed | 32 MHz |
| Program Memory (Flash) | 1 MB (341.5K x 24) |
| RAM | 32 KB |
| Flash Architecture | Dual-partition with Live Update |
| Operating Voltage Range | 2.0 V to 3.6 V |
| I/O Pins | 85 |
| Paket | 100-pin TQFP (12x12 mm) |
| Tipe Mounting | Surface Mount |
| Rentang Suhu Kerja | -40 C to +85 C (Industrial) |
| ADC | 12-bit on-chip ADC |
| Communication Interfaces | UART, SPI, I2C |
| Packaging Form | Tape and Reel (T suffix) |
| Status RoHS | Compliant |
Konfigurasi Pin PIC24FJ1024GA610T-I/PT
| Pin produk 1 | RA0 — Port A bit 0 / analog / PPS-capable |
| Pin produk 2 | RA1 — Port A bit 1 / analog / PPS-capable |
| Pin produk 3 | RA2 — Port A bit 2 / analog / PPS-capable |
| Pin produk 4 | RA3 — Port A bit 3 / analog / PPS-capable |
| Pin produk 5 | RA4 — Port A bit 4 / analog / PPS-capable |
| Pin produk 6 | RA5 — Port A bit 5 / analog / PPS-capable |
| Pin produk 7 | RA6 — Port A bit 6 / analog / PPS-capable |
| Pin produk 8 | RA7 — Port A bit 7 / analog / PPS-capable |
| Pin produk 9 | RA8 — Port A bit 8 / analog / PPS-capable |
| Pin produk 10 | RA9 — Port A bit 9 / analog / PPS-capable |
| Pin produk 11 | RA10 — Port A bit 10 / analog / PPS-capable |
| Pin produk 12 | VSS — Ground reference |
| Pin produk 13 | VDD — Positive supply (2.0V-3.6V) |
| Pin produk 14 | RB0 — Port B bit 0 / analog / PPS-capable |
| Pin produk 15 | RB1 — Port B bit 1 / analog / PPS-capable |
| Pin produk 16 | RB2 — Port B bit 2 / analog / PPS-capable |
| Pin produk 17 | RB3 — Port B bit 3 / analog / PPS-capable |
| Pin produk 18 | RB4 — Port B bit 4 / analog / PPS-capable |
| Pin produk 19 | RB5 — Port B bit 5 / analog / PPS-capable |
| Pin produk 20 | RB6 — Port B bit 6 / analog / PPS-capable |
| Pin produk 21 | RB7 — Port B bit 7 / analog / PPS-capable |
| Pin produk 22 | RB8 — Port B bit 8 / analog / PPS-capable |
| Pin produk 23 | RB9 — Port B bit 9 / analog / PPS-capable |
| Pin produk 24 | RB10 — Port B bit 10 / analog / PPS-capable |
| Pin produk 25 | RB11 — Port B bit 11 / analog / PPS-capable |
| Pin produk 26 | RB12 — Port B bit 12 / analog / PPS-capable |
| Pin produk 27 | RB13 — Port B bit 13 / analog / PPS-capable |
| Pin produk 28 | RB14 — Port B bit 14 / analog / PPS-capable |
| Pin produk 29 | RB15 — Port B bit 15 / analog / PPS-capable |
| Pin produk 30 | VSS — Ground reference |
| Pin produk 31 | VDD — Positive supply (2.0V-3.6V) |
| Pin produk 32 | RC0 — Port C bit 0 / analog / PPS-capable |
| Pin produk 33 | RC1 — Port C bit 1 / analog / PPS-capable |
| Pin produk 34 | RC2 — Port C bit 2 / analog / PPS-capable |
| Pin produk 35 | RC3 — Port C bit 3 / analog / PPS-capable |
| Pin produk 36 | RC4 — Port C bit 4 / analog / PPS-capable |
| Pin produk 37 | RC5 — Port C bit 5 / analog / PPS-capable |
| Pin produk 38 | RC6 — Port C bit 6 / analog / PPS-capable |
| Pin produk 39 | RC7 — Port C bit 7 / analog / PPS-capable |
| Pin produk 40 | RC8 — Port C bit 8 / analog / PPS-capable |
| Pin produk 41 | RC9 — Port C bit 9 / analog / PPS-capable |
| Pin produk 42 | RC10 — Port C bit 10 / analog / PPS-capable |
| Pin produk 43 | RC11 — Port C bit 11 / analog / PPS-capable |
| Pin produk 44 | RC12 — Port C bit 12 / analog / PPS-capable |
| Pin produk 45 | RC13 — Port C bit 13 / analog / PPS-capable |
| Pin produk 46 | RC14 — Port C bit 14 / analog / PPS-capable |
| Pin produk 47 | RC15 — Port C bit 15 / analog / PPS-capable |
| Pin produk 48 | VSS — Ground reference |
| Pin produk 49 | VDD — Positive supply (2.0V-3.6V) |
| Pin produk 50 | RD0 — Port D bit 0 / analog / PPS-capable |
| Pin produk 51 | RD1 — Port D bit 1 / analog / PPS-capable |
| Pin produk 52 | RD2 — Port D bit 2 / analog / PPS-capable |
| Pin produk 53 | RD3 — Port D bit 3 / analog / PPS-capable |
| Pin produk 54 | RD4 — Port D bit 4 / analog / PPS-capable |
| Pin produk 55 | RD5 — Port D bit 5 / analog / PPS-capable |
| Pin produk 56 | RD6 — Port D bit 6 / analog / PPS-capable |
| Pin produk 57 | RD7 — Port D bit 7 / analog / PPS-capable |
| Pin produk 58 | RD8 — Port D bit 8 / analog / PPS-capable |
| Pin produk 59 | RD9 — Port D bit 9 / analog / PPS-capable |
| Pin produk 60 | RD10 — Port D bit 10 / analog / PPS-capable |
| Pin produk 61 | RD11 — Port D bit 11 / analog / PPS-capable |
| Pin produk 62 | RD12 — Port D bit 12 / analog / PPS-capable |
| Pin produk 63 | RD13 — Port D bit 13 / analog / PPS-capable |
| Pin produk 64 | RD14 — Port D bit 14 / analog / PPS-capable |
| Pin produk 65 | RD15 — Port D bit 15 / analog / PPS-capable |
| Pin produk 66 | VSS — Ground reference |
| Pin produk 67 | VDD — Positive supply (2.0V-3.6V) |
| Pin produk 68 | RE0 — Port E bit 0 / analog / PPS-capable |
| Pin produk 69 | RE1 — Port E bit 1 / analog / PPS-capable |
| Pin produk 70 | RE2 — Port E bit 2 / analog / PPS-capable |
| Pin produk 71 | RE3 — Port E bit 3 / analog / PPS-capable |
| Pin produk 72 | RE4 — Port E bit 4 / analog / PPS-capable |
| Pin produk 73 | RE5 — Port E bit 5 / analog / PPS-capable |
| Pin produk 74 | RE6 — Port E bit 6 / analog / PPS-capable |
| Pin produk 75 | RE7 — Port E bit 7 / analog / PPS-capable |
| Pin produk 76 | RE8 — Port E bit 8 / analog / PPS-capable |
| Pin produk 77 | RE9 — Port E bit 9 / analog / PPS-capable |
| Pin produk 78 | VSS — Ground reference |
| Pin produk 79 | VDD — Positive supply (2.0V-3.6V) |
| Pin produk 80 | RF0 — Port F bit 0 / analog / PPS-capable |
| Pin produk 81 | RF1 — Port F bit 1 / analog / PPS-capable |
| Pin produk 82 | RF2 — Port F bit 2 / analog / PPS-capable |
| Pin produk 83 | RF3 — Port F bit 3 / analog / PPS-capable |
| Pin produk 84 | RF4 — Port F bit 4 / analog / PPS-capable |
| Pin produk 85 | RF5 — Port F bit 5 / analog / PPS-capable |
| Pin produk 86 | RF6 — Port F bit 6 / analog / PPS-capable |
| Pin produk 87 | RF7 — Port F bit 7 / analog / PPS-capable |
| Pin produk 88 | RF8 — Port F bit 8 / analog / PPS-capable |
| Pin produk 89 | RF9 — Port F bit 9 / analog / PPS-capable |
| Pin produk 90 | RF10 — Port F bit 10 / analog / PPS-capable |
| Pin produk 91 | RF11 — Port F bit 11 / analog / PPS-capable |
| Pin produk 92 | RF12 — Port F bit 12 / analog / PPS-capable |
| Pin produk 93 | RF13 — Port F bit 13 / analog / PPS-capable |
| Pin produk 94 | SDA2 — I2C2 data (fixed function, PPS-input capable) |
| Pin produk 95 | SCL2 — I2C2 clock (fixed function, PPS-input capable) |
| Pin produk 96 | RG0 — Port G bit 0 / analog / PPS-capable |
| Pin produk 97 | RG1 — Port G bit 1 / analog / PPS-capable |
| Pin produk 98 | RG2 — Port G bit 2 / analog / PPS-capable |
| Pin produk 99 | RG3 — Port G bit 3 / analog / PPS-capable |
| Pin produk 100 | MCLR — Master Clear (reset, active-low) |
Aplikasi Umum
PIC24FJ1024GA610T-I/PT cocok untuk 7 aplikasis: Industrial Sensor Hub, Portable Medical/Fitness Device, USB Human Interface Device, Home Automation Controller, Battery-Powered IoT Sensor Node, Graphical Display Controller, Automotive Body Control Module (auxiliary).
Industrial Sensor Hub
The PIC24FJ1024GA610T-I/PT fits industrial sensor hubs because its 1 MB Flash supports multiple protocol stacks (Modbus, CANopen, proprietary RF) without external memory, and its 32 KB SRAM buffers high-rate sensor data streams before transmission. The 16-bit PIC24 core at 32 MHz delivers 16 MIPS, sufficient for DSP-style filtering of accelerometer and temperature arrays. Wide 2.0V-3.6V operation tolerates 24V-bus powered rails stepped down by a switching pre-regulator. Hardware AES/SHA offloads secure telemetry encryption. PPS remaps UART/SPI/I2C to any pin, easing PCB layout when sensor count scales. The 100-pin TQFP exposes 85 I/O for matrix-scanned keypads and parallel LCDs.
Direkomendasikan
Portable Medical/Fitness Device
The PIC24FJ1024GA610T-I/PT suits portable medical/fitness devices because XLP technology delivers nanoWatt sleep currents critical for coin-cell battery life, and its 1 MB Flash supports BLE/USB protocol stacks plus on-device waveform storage. The 32 KB SRAM buffers 24-hour heart-rate and SpO2 logs without external memory. The 12-bit ADC captures bioelectric signals from ECG leads with adequate resolution for fitness-grade monitoring. PPS allows the AFE interface to be routed to the quietest analog pins for low-noise acquisition. Operating down to 2.0V enables single lithium coin-cell operation. Real-time clock calendar retains time stamps during deep sleep.
Direkomendasikan
USB Human Interface Device
The PIC24FJ1024GA610T-I/PT is a strong fit for USB peripherals when paired with the GB610 sibling or with an external USB transceiver; the 1 MB Flash accommodates USB stacks plus HID class firmware. The 32 MHz CPU delivers 16 MIPS for HID report processing, keyboard matrix scanning, and bootloader code. PPS remapping is critical because USB D+/D- pins occupy fixed positions while other peripherals can be relocated to free pins for the D+/D- bond-out. Hardware AES encrypts wireless HID bridges. The 100-pin TQFP supports a 8x8 keyboard matrix plus LED indicators and a small character LCD. Drop-in upgrade to PIC24FJ1024GB610T-I/PT adds USB OTG on the same footprint.
Direkomendasikan
Home Automation Controller
The PIC24FJ1024GA610T-I/PT works as a home automation hub by running Zigbee or Z-Wave gateway stacks in 1 MB Flash while keeping 32 KB SRAM available for device tables and event queues. Peripheral Pin Select lets designers reassign UART/SPI for multiple radio modules (Zigbee, Wi-Fi, sub-GHz) without pin conflicts. Wide 2.0V-3.6V tolerance supports direct connection to 3.3V regulated rails from mains adapters. The dual-partition Flash with Live Update enables OTA firmware upgrades, important for deployed consumer gateways. 85 I/O pins drive multi-color LED indicators, button matrices, and relay outputs. AES hardware accelerates encrypted provisioning.
Direkomendasikan
Battery-Powered IoT Sensor Node
The PIC24FJ1024GA610T-I/PT fits battery-powered IoT nodes because XLP deep-sleep with RTCC retention draws sub-microamp current while maintaining time-stamping, extending coin-cell life to years. The 1 MB Flash runs LoRaWAN or BLE stacks plus sensor fusion code without external storage. The 12-bit ADC reads temperature, humidity, and battery voltage with adequate accuracy for environmental sensing. PPS routes the radio SPI interface to clean digital pins while keeping analog ADC inputs isolated for low-noise acquisition. Live Update dual-partition Flash supports secure OTA over the air. Operating voltage down to 2.0V supports primary lithium cells.
Direkomendasikan
Graphical Display Controller
The PIC24FJ1024GA610T-I/PT serves graphical display controllers by using 1 MB Flash for font tables, bitmap assets, and graphics libraries for TFT or OLED panels up to 320x240 pixels. The 32 KB SRAM supports partial frame buffers without external memory. PMP (Parallel Master Port) interfaces directly to 8-bit or 16-bit display buses, and PPS routes the PMP to upper I/O banks. The 16-bit core handles GUI rendering and touch input scanning in real time. PPS remapping decouples display data lines from the touch controller SPI bus. Hardware crypto protects signed display content (anti-counterfeiting labels).
Direkomendasikan
Automotive Body Control Module (auxiliary)
The PIC24FJ1024GA610T-I/PT can serve as an auxiliary automotive body controller for non-safety functions such as seat memory, mirror positioning, and ambient lighting. The 1 MB Flash supports LIN/CAN stacks plus vendor-specific calibration data, and the 16-bit core runs multiple PWM channels for motor drivers and LED dimming. PPS routes LIN UART, motor PWM, and current-sense ADC inputs without pin conflicts. Dual-partition Flash supports OEM software reflashing at the dealer. 85 I/O pins drive multi-channel LED drivers and switch inputs. Note: the -I/PT industrial temperature grade is rated -40C to +85C; for under-hood applications choose the PIC24FJ1024GA610-E/PT (-40C to +125C).
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC24FJ1024GA610T-I/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC24FJ1024GA610-I/PT | PIC24FJ1024GB610T-I/PT | PIC24FJ1024GA610-E/PT | PIC24FJ1024GB610-I/PT | PIC24FJ1024GA610T-I/BG |
|---|---|---|---|---|---|---|
| Package | TQFP-100 (12x12 mm) | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory (Flash) | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| RAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| Maximum CPU Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| USB 2.0 OTG | No | No | Yes | No | Yes | No |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) |
| Packaging Form | Tape and Reel | Tray | Tape and Reel | Tray | Tray | Tape and Reel |
| RoHS Status | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
Diferensiator Kunci
- Dual-partition Flash with Live Update (vsPIC24FJ1024GA610-I/PT)
- Drop-in USB 2.0 OTG upgrade path (vsPIC24FJ1024GB610T-I/PT)
- Extended temperature option (vsPIC24FJ1024GA610-E/PT)
Catatan Desain
Place a 10 uF bulk capacitor and a 0.1 uF ceramic decoupling capacitor within 5 mm of every VDD/VSS pair on the PIC24FJ1024GA610T-I/PT. The 100-pin TQFP has four VDD/VSS pairs distributed along the package perimeter. Designers should pair each VDD with its nearest VSS to minimize switching-current return loops and reduce radiated emissions on analog ADC inputs. Use a low-ESR ceramic (X7R/X5R) for the bulk; tantalum is acceptable but adds series resistance.
Route ADC analog inputs away from PWM and digital switching signals to avoid coupling noise into ADC measurements. Use a guard ring connected to a quiet analog ground around sensitive analog traces. The PPS peripheral pin select system allows UART, SPI, and I2C to be remapped to any digital I/O, but ADC inputs have fixed pin assignments on the TQFP-100 package. Plan your pinout early so that digital switching functions do not abut the analog ADC channels.
Do not apply voltage to any I/O pin before VDD is powered - this can back-power the MCU through I/O clamping diodes and cause latch-up. Add a 10 kohm pull-up to MCLR and a 100 nF cap to ground for proper reset. When using the dual-partition Flash Live Update feature, do not interrupt the partition swap with a debugger breakpoint; allow the swap sequence to complete before halting the core. Verify JTAG/ICSP programming connections per the device family programming specification.
Estimated: at maximum CPU activity (32 MHz, all peripherals active) the PIC24FJ1024GA610T-I/PT draws approximately 25 mA from a 3.3V supply, dissipating around 82 mW. The TQFP-100 package has a typical theta_JA of approximately 45 C/W on a 4-layer JEDEC test board. Under these conditions the junction temperature rise above ambient is only about 3.7 C, so no special thermal management is required for typical consumer/industrial designs. Avoid blocking airflow or insulating the package.
Informasi Konformitas
RoHS and lead-free confirmed per Microchip product page and multiple distributor listings. Not AEC-Q100 qualified; for automotive safety applications the PIC24FJ1024GA610-E/PT extended-temperature variant is recommended but still not formally AEC-Q100 qualified.
