PIC24FJ128DA110T-I/PT - 16-Bit MCU, 128KB Flash, USB, Graphics | Microchip
MPN: PIC24FJ128DA110T-I/PT ✓ AktifPIC24FJ128DA110T-I/PT Ringkasan
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral interfaces into one package. The PIC24F family sits between 8-bit PIC16/PIC18 devices and 32-bit PIC32 devices, offering 16-bit RISC performance, low-power sleep modes, and rich peripheral integration for cost-sensitive embedded designs. Within the PIC24F family, the 'DA' subgroup adds an on-chip graphics display controller targeting low-cost WQVGA TFT panels up to 4.3 inches and 480x272 resolution.
Key features include 16 MIPS performance, hardware PMP (Parallel Master Port) for graphics bus connection, integrated USB 2.0 full-speed OTG with on-chip transceiver, 4-wire resistive touch-screen controller, CTMU for capacitive touch, hardware crypto engine (AES/DES), Real-Time Clock and Calendar (RTCC) with calendar mode, and 16-channel 10-bit ADC. The 100-TQFP package exposes 84 I/O lines with flexible peripheral remapping, enabling direct bus connection to TFT panels without an external bridge ASIC.
The PIC24FJ128DA110 architecture is built around a modified Harvard RISC core with a 16-bit wide datapath, 24-bit instructions, and a 3-stage pipeline that delivers 8 MIPS at 32 MHz. The graphics controller includes a dedicated DMA-driven LCD interface supporting TFT panels up to WQVGA. Hardware AES-128 and DES blocks offload encryption tasks from the CPU, useful for secure USB applications and consumer devices needing basic content protection.
Typical applications include WQVGA TFT graphical user interfaces, USB-enabled medical devices, industrial HMI panels, point-of-sale terminals, USB peripherals (HID, CDC, MSD, Audio class), smart appliance control boards, and embedded graphical instruments. The integrated USB OTG with on-chip transceiver eliminates the need for an external PHY.
When designing with this device, allocate PCB area carefully because the 100-TQFP at 12x12 mm has 0.5 mm pitch and is a fine-pitch part - use 4 mil trace and space, reflow profile per J-STD-020, and follow Microchip's PCB layout guidelines for USB 2.0 high-speed analog pins. Decouple VDD/VUSB with 100 nF + 4.7 uF within 3 mm of the pins.
This page synthesizes distributor stock and pricing, drop-in alternatives, and design considerations not consolidated in any single manufacturer document.
Alternatif penggantian untuk PIC24FJ128DA110T-I/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC24FJ128DA110T-I/PT (sama faktor bentuk dan footprint) — berbeda di dalam Graphics Controller, Package, ADC, Core Architecture, USB.
PIC24FJ128DA110-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ128DA110T-I/BG
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ256DA110-I/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC24FJ128GA010-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ128DA110-I/BG
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ128DA110T-I/PT Rating Maksimal & Karakteristik Listrik
| Core Architecture | PIC 16-bit RISC |
| Series | PIC24F DA Family |
| Program Memory Size | 128 KB (43K x 24) Flash |
| RAM Size | 24 KB |
| Maximum CPU Speed | 32 MHz (8 MIPS) |
| Supply Voltage (VDD) | 2.0 V to 3.6 V |
| Number of I/O Pins | 84 |
| Paket / Case | 100-TQFP (PT) 12x12 mm, 0.4 mm pitch |
| Tipe Mounting | Surface Mount |
| Suhu Kerja | -40C to +85C (Industrial) |
| Connectivity | I2C, IrDA, SPI, UART/USART, USB OTG |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, LVD, POR, PWM, WDT, RTCC, CTMU, AES/DES, PMP |
| ADC | 16-channel 10-bit |
| Oscillator Type | Internal |
| Data Converters | A/D 16x10b |
| Program Memory Type | Flash |
| Graphics Controller | Integrated, supports up to WQVGA (480x272) |
| USB | USB 2.0 Full-Speed OTG with on-chip transceiver |
| Status RoHS | Compliant |
| Packaging | Tape & Reel (TR) |
Konfigurasi Pin PIC24FJ128DA110T-I/PT
| Pin produk 1 | RG15 — General-purpose I/O / PMP data line |
| Pin produk 2 | RG13 — General-purpose I/O |
| Pin produk 3 | RG12 — General-purpose I/O |
| Pin produk 4 | VSS — Ground |
| Pin produk 5 | VDD — Digital supply voltage 2.0-3.6 V |
| Pin produk 6 | RG14 — General-purpose I/O |
| Pin produk 7 | RF15 — General-purpose I/O |
| Pin produk 8 | RF14 — General-purpose I/O |
| Pin produk 9 | SDA2 — I2C2 data (also U2RTS) |
| Pin produk 10 | SCL2 — I2C2 clock (also U2CTS) |
| Pin produk 11 | RG0 — General-purpose I/O |
| Pin produk 12 | RG1 — General-purpose I/O |
| Pin produk 13 | PMD0 — PMP data line 0 |
| Pin produk 14 | PMD1 — PMP data line 1 |
| Pin produk 15 | PMD2 — PMP data line 2 |
| Pin produk 16 | PMD3 — PMP data line 3 |
| Pin produk 17 | PMD4 — PMP data line 4 |
| Pin produk 18 | PMD5 — PMP data line 5 |
| Pin produk 19 | PMD6 — PMP data line 6 |
| Pin produk 20 | PMD7 — PMP data line 7 |
| Pin produk 21 | PMA16 — PMP address line 16 |
| Pin produk 22 | PMA17 — PMP address line 17 |
| Pin produk 23 | VSS — Ground |
| Pin produk 24 | VDD — Digital supply voltage |
| Pin produk 25 | PMRD — PMP read strobe |
| Pin produk 26 | PMWR — PMP write strobe |
| Pin produk 27 | RF0 — General-purpose I/O |
| Pin produk 28 | RF1 — General-purpose I/O |
| Pin produk 29 | RF2 — General-purpose I/O |
| Pin produk 30 | RF3 — General-purpose I/O |
| Pin produk 31 | RF4 — General-purpose I/O |
| Pin produk 32 | RF5 — General-purpose I/O |
| Pin produk 33 | RF6 — General-purpose I/O |
| Pin produk 34 | RF7 — General-purpose I/O |
| Pin produk 35 | RF8 — General-purpose I/O |
| Pin produk 36 | RF9 — General-purpose I/O |
| Pin produk 37 | RF10 — General-purpose I/O |
| Pin produk 38 | RF11 — General-purpose I/O |
| Pin produk 39 | RF12 — General-purpose I/O |
| Pin produk 40 | RF13 — General-purpose I/O |
| Pin produk 41 | RD0 — General-purpose I/O / ICSP data |
| Pin produk 42 | RD1 — General-purpose I/O / ICSP clock |
| Pin produk 43 | RD2 — General-purpose I/O |
| Pin produk 44 | RD3 — General-purpose I/O |
| Pin produk 45 | RC1 — General-purpose I/O / U1TX |
| Pin produk 46 | RC2 — General-purpose I/O / U1RX |
| Pin produk 47 | RC3 — General-purpose I/O / U1RTS |
| Pin produk 48 | RC4 — General-purpose I/O / U1CTS |
| Pin produk 49 | RD4 — General-purpose I/O |
| Pin produk 50 | RD5 — General-purpose I/O |
| Pin produk 51 | RD6 — General-purpose I/O |
| Pin produk 52 | RD7 — General-purpose I/O |
| Pin produk 53 | RD8 — General-purpose I/O |
| Pin produk 54 | RD9 — General-purpose I/O |
| Pin produk 55 | RD10 — General-purpose I/O |
| Pin produk 56 | RD11 — General-purpose I/O |
| Pin produk 57 | VSS — Ground |
| Pin produk 58 | VDD — Digital supply voltage |
| Pin produk 59 | RD12 — General-purpose I/O |
| Pin produk 60 | RD13 — General-purpose I/O |
| Pin produk 61 | RD14 — General-purpose I/O |
| Pin produk 62 | RD15 — General-purpose I/O |
| Pin produk 63 | VUSB — USB transceiver supply, requires decoupling |
| Pin produk 64 | VBUS — USB VBUS sensing input |
| Pin produk 65 | VUSB3V3 — Internal USB 3.3V regulator output |
| Pin produk 66 | D+ — USB data plus |
| Pin produk 67 | D- — USB data minus |
| Pin produk 68 | RC12 — General-purpose I/O |
| Pin produk 69 | RC13 — General-purpose I/O |
| Pin produk 70 | RC14 — General-purpose I/O / OSC2 |
| Pin produk 71 | RC15 — General-purpose I/O / OSC1 |
| Pin produk 72 | RA0 — General-purpose I/O / AN0 |
| Pin produk 73 | RA1 — General-purpose I/O / AN1 |
| Pin produk 74 | RA2 — General-purpose I/O / AN2 |
| Pin produk 75 | RA3 — General-purpose I/O / AN3 |
| Pin produk 76 | RA4 — General-purpose I/O / AN4 |
| Pin produk 77 | RA5 — General-purpose I/O / AN5 |
| Pin produk 78 | RA6 — General-purpose I/O / AN6 |
| Pin produk 79 | RA7 — General-purpose I/O / AN7 |
| Pin produk 80 | RA8 — General-purpose I/O / AN8 |
| Pin produk 81 | RA9 — General-purpose I/O / AN9 |
| Pin produk 82 | RA10 — General-purpose I/O / AN10 |
| Pin produk 83 | RA11 — General-purpose I/O / AN11 |
| Pin produk 84 | RA12 — General-purpose I/O / AN12 |
| Pin produk 85 | RA13 — General-purpose I/O / AN13 |
| Pin produk 86 | RA14 — General-purpose I/O / AN14 |
| Pin produk 87 | RA15 — General-purpose I/O / AN15 |
| Pin produk 88 | VSS — Ground |
| Pin produk 89 | VDD — Digital supply voltage |
| Pin produk 90 | RG2 — General-purpose I/O |
| Pin produk 91 | RG3 — General-purpose I/O |
| Pin produk 92 | RG6 — General-purpose I/O / CCP6 |
| Pin produk 93 | RG7 — General-purpose I/O / CCP7 |
| Pin produk 94 | RG8 — General-purpose I/O / CCP8 |
| Pin produk 95 | RG9 — General-purpose I/O / CCP9 |
| Pin produk 96 | MCLR — Master Clear reset input (active-low) |
| Pin produk 97 | RG11 — General-purpose I/O |
| Pin produk 98 | RB0 — General-purpose I/O / AN16 |
| Pin produk 99 | RB1 — General-purpose I/O / AN17 |
| Pin produk 100 | RB2 — General-purpose I/O / AN18 |
Aplikasi Umum
PIC24FJ128DA110T-I/PT cocok untuk 6 aplikasis: WQVGA TFT Graphical HMI Panel, USB Medical Device (FDA Class I/II), Industrial HMI / Process Control Panel, USB-Connected Consumer Appliance, Point-of-Sale (POS) Terminal / Card Reader, Portable Data Acquisition Logger.
WQVGA TFT Graphical HMI Panel
The PIC24FJ128DA110T-I/PT is purpose-built for graphical HMI panels up to 4.3-inch WQVGA (480x272) TFT displays. Its integrated graphics controller drives TFT panels directly via the Parallel Master Port (PMP), eliminating the need for an external graphics controller ASIC and reducing BOM cost. The 128 KB Flash holds the Microchip Graphics Library plus assets, while the 32 MHz core sustains 60 fps redraws. The CTMU enables capacitive touch without external hardware, and USB OTG supports firmware updates and PC connectivity.
Direkomendasikan
USB Medical Device (FDA Class I/II)
The PIC24FJ128DA110T-I/PT's integrated USB 2.0 Full-Speed OTG with on-chip transceiver supports CDC, HID, and MSD device classes required for medical device PC connectivity. Hardware AES-128/DES offloads encryption for HIPAA-compliant data transfer without burdening the CPU. The integrated 10-bit ADC with 16 channels supports vital-sign sensor front-ends. The 100-TQFP package simplifies hand-rework for prototype builds common in medical device development, and the industrial temperature range suits clinical equipment.
Direkomendasikan
Industrial HMI / Process Control Panel
The PIC24FJ128DA110T-I/PT's 84 GPIO, hardware PMP, RTCC, and CTMU directly support industrial control panels with TFT displays, pushbuttons, and capacitive touch. The industrial -40C to +85C temperature range suits factory floor deployment. The 10-bit ADC supports analog sensor inputs from pressure, flow, and temperature transducers. The integrated graphics controller eliminates external display ASICs in compact DIN-rail mount designs.
Direkomendasikan
USB-Connected Consumer Appliance
The PIC24FJ128DA110T-I/PT's USB OTG and graphics capability suit small consumer appliances with a TFT display and PC/phone connectivity. Examples include smart coffee makers, kitchen scales with USB charging, and personal care devices with graphical status displays. The hardware crypto engine protects firmware update flows, and the low-power sleep modes suit battery-powered variants. The 100-TQFP package is suitable for consumer production volumes with standard SMT lines.
Direkomendasikan
Point-of-Sale (POS) Terminal / Card Reader
The PIC24FJ128DA110T-I/PT's USB OTG, hardware AES/DES, and integrated graphics controller support POS peripherals such as USB-connected customer-facing displays, EMV chip card readers, and signature capture pads. The hardware crypto engine accelerates PIN block encryption, and the integrated ADC reads keypad matrix inputs. The 24 KB RAM is sufficient for crypto buffers and USB descriptors, while 128 KB Flash accommodates USB stacks and POS application code.
Direkomendasikan
Portable Data Acquisition Logger
The PIC24FJ128DA110T-I/PT's 16-channel 10-bit ADC, RTCC with timestamp, USB Mass Storage support, and 128 KB Flash suit portable data loggers with USB stick storage. The device's low-power sleep modes preserve battery life, and the integrated graphics controller supports small TFT displays for waveform or measurement visualization. CTMU provides capacitive touch for user input without extra components.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC24FJ128DA110T-I/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC24FJ128DA110-I/PT | PIC24FJ256DA110-I/PT | PIC24FJ128GA010-I/PT | PIC24FJ128DA110-I/BG |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (PT) | 100-TQFP (PT) - same | 100-TQFP (PT) - same | 100-TQFP (PT) - same | 121-BGA (BG) - different |
| Program Memory (Flash) | 128 KB | 128 KB | 256 KB | 128 KB | 128 KB |
| RAM Size | 24 KB | 24 KB | 24 KB | 8 KB | 24 KB |
| Maximum CPU Speed | 32 MHz (8 MIPS) | 32 MHz (8 MIPS) | 32 MHz (8 MIPS) | 32 MHz (8 MIPS) | 32 MHz (8 MIPS) |
| Integrated Graphics Controller | Yes (WQVGA) | Yes (WQVGA) | Yes (WQVGA) | No | Yes (WQVGA) |
| USB | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | No USB | USB 2.0 FS OTG |
| Number of I/O | 84 | 84 | 84 | 84 | 84 |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| CTMU (Capacitive Touch) | Yes | Yes | Yes | No | Yes |
Diferensiator Kunci
- Integrated graphics controller eliminates external display ASIC (vsPIC24FJ128GA010-I/PT)
- USB 2.0 Full-Speed OTG with on-chip transceiver (vsPIC24FJ128GA010-I/PT)
- Tape & Reel packaging suited for SMT production (vsPIC24FJ128DA110-I/PT)
Catatan Desain
The 100-TQFP package has 0.4 mm pitch, requiring 4 mil (0.1 mm) trace and space rules with reflow profile per J-STD-020. Place all decoupling capacitors (100 nF X7R + 4.7 uF bulk) within 3 mm of VDD/VSS pairs. For USB applications, route D+ and D- as a 90-ohm differential pair with length matching within 150 mil, and add external ESD protection (e.g., USBLC6-2SC6) directly at the connector. The VUSB pin requires a 1 uF + 100 nF decoupling network on its own ground reference.
Estimated: at 32 MHz CPU clock, full peripheral usage, and USB active, the PIC24FJ128DA110T-I/PT draws approximately 25-35 mA from a 3.3 V supply. For battery-powered designs, leverage the device's Deep Sleep mode (under 1 uA with RTCC active) for standby current reduction. Connect all VDD pins to a common supply and use a star-ground topology for the analog AVSS/AVDD pair if precision ADC readings are required.
Three common pitfalls: (1) Programming the device requires an ICSP-capable programmer (PICkit 3, PICkit 4, ICD 4, MPLAB SNAP) - in-circuit debugging uses the PGECx/PGEDx pins which must be accessible; (2) The 100-TQFP and 121-BGA packages of the DA110 share silicon but are NOT pin-compatible - do not assume BG can replace PT on the same PCB; (3) The graphics controller requires careful PMP pin assignment via PPS to avoid bus contention with peripherals.
For PMP-driven TFT panels, group PMDx, PMRD, PMWR, and PMA lines together with matched lengths to avoid display artifacts. Keep the analog AVSS pin tied to a quiet ground; isolate digital switching currents on VSS pins. Place the 32.768 kHz crystal within 5 mm of SOSCO/SOSCI with short traces and guard ring. For capacitive touch (CTMU), follow Microchip TB3069 layout guidelines - keep touch sensors trace-length matched and use grounded shielding on the PCB underside.
Informasi Konformitas
RoHS and REACH compliant per Microchip product page. Industrial grade (I suffix, -40C to +85C). Not AEC-Q100 qualified - not for automotive safety applications. Lead-free and halogen-free packaging. Conflict minerals compliance declared per Microchip supplier disclosure.
