PIC24FJ128DA110T-I/PT - 16-Bit MCU, 128KB Flash, USB, Graphics | Microchip
MPN: PIC24FJ128DA110T-I/PT ✓ פעילPIC24FJ128DA110T-I/PT סקירה
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral interfaces into one package. The PIC24F family sits between 8-bit PIC16/PIC18 devices and 32-bit PIC32 devices, offering 16-bit RISC performance, low-power sleep modes, and rich peripheral integration for cost-sensitive embedded designs. Within the PIC24F family, the 'DA' subgroup adds an on-chip graphics display controller targeting low-cost WQVGA TFT panels up to 4.3 inches and 480x272 resolution.
Key features include 16 MIPS performance, hardware PMP (Parallel Master Port) for graphics bus connection, integrated USB 2.0 full-speed OTG with on-chip transceiver, 4-wire resistive touch-screen controller, CTMU for capacitive touch, hardware crypto engine (AES/DES), Real-Time Clock and Calendar (RTCC) with calendar mode, and 16-channel 10-bit ADC. The 100-TQFP package exposes 84 I/O lines with flexible peripheral remapping, enabling direct bus connection to TFT panels without an external bridge ASIC.
The PIC24FJ128DA110 architecture is built around a modified Harvard RISC core with a 16-bit wide datapath, 24-bit instructions, and a 3-stage pipeline that delivers 8 MIPS at 32 MHz. The graphics controller includes a dedicated DMA-driven LCD interface supporting TFT panels up to WQVGA. Hardware AES-128 and DES blocks offload encryption tasks from the CPU, useful for secure USB applications and consumer devices needing basic content protection.
Typical applications include WQVGA TFT graphical user interfaces, USB-enabled medical devices, industrial HMI panels, point-of-sale terminals, USB peripherals (HID, CDC, MSD, Audio class), smart appliance control boards, and embedded graphical instruments. The integrated USB OTG with on-chip transceiver eliminates the need for an external PHY.
When designing with this device, allocate PCB area carefully because the 100-TQFP at 12x12 mm has 0.5 mm pitch and is a fine-pitch part - use 4 mil trace and space, reflow profile per J-STD-020, and follow Microchip's PCB layout guidelines for USB 2.0 high-speed analog pins. Decouple VDD/VUSB with 100 nF + 4.7 uF within 3 mm of the pins.
This page synthesizes distributor stock and pricing, drop-in alternatives, and design considerations not consolidated in any single manufacturer document.
חלופות תחליף ישיר עבור PIC24FJ128DA110T-I/PT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC24FJ128DA110T-I/PT (אותו גורם צורה וטביעת רגל) — שונים ב Graphics Controller, Package, ADC, Core Architecture, USB.
PIC24FJ128DA110-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC24FJ128DA110T-I/BG
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC24FJ256DA110-I/PT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC24FJ128GA010-I/PT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC24FJ128DA110-I/BG
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC24FJ128DA110T-I/PT דירוגים מרביים ומאפיינים חשמליים
| Core Architecture | PIC 16-bit RISC |
| Series | PIC24F DA Family |
| Program Memory Size | 128 KB (43K x 24) Flash |
| RAM Size | 24 KB |
| Maximum CPU Speed | 32 MHz (8 MIPS) |
| Supply Voltage (VDD) | 2.0 V to 3.6 V |
| Number of I/O Pins | 84 |
| מארז / Case | 100-TQFP (PT) 12x12 mm, 0.4 mm pitch |
| סוג הרכבה | Surface Mount |
| טמפרטורת פעולה | -40C to +85C (Industrial) |
| Connectivity | I2C, IrDA, SPI, UART/USART, USB OTG |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, LVD, POR, PWM, WDT, RTCC, CTMU, AES/DES, PMP |
| ADC | 16-channel 10-bit |
| Oscillator Type | Internal |
| Data Converters | A/D 16x10b |
| Program Memory Type | Flash |
| Graphics Controller | Integrated, supports up to WQVGA (480x272) |
| USB | USB 2.0 Full-Speed OTG with on-chip transceiver |
| סטטוס RoHS | Compliant |
| Packaging | Tape & Reel (TR) |
תצורת פינים של PIC24FJ128DA110T-I/PT
| פין 1 | RG15 — General-purpose I/O / PMP data line |
| פין 2 | RG13 — General-purpose I/O |
| פין 3 | RG12 — General-purpose I/O |
| פין 4 | VSS — Ground |
| פין 5 | VDD — Digital supply voltage 2.0-3.6 V |
| פין 6 | RG14 — General-purpose I/O |
| פין 7 | RF15 — General-purpose I/O |
| פין 8 | RF14 — General-purpose I/O |
| פין 9 | SDA2 — I2C2 data (also U2RTS) |
| פין 10 | SCL2 — I2C2 clock (also U2CTS) |
| פין 11 | RG0 — General-purpose I/O |
| פין 12 | RG1 — General-purpose I/O |
| פין 13 | PMD0 — PMP data line 0 |
| פין 14 | PMD1 — PMP data line 1 |
| פין 15 | PMD2 — PMP data line 2 |
| פין 16 | PMD3 — PMP data line 3 |
| פין 17 | PMD4 — PMP data line 4 |
| פין 18 | PMD5 — PMP data line 5 |
| פין 19 | PMD6 — PMP data line 6 |
| פין 20 | PMD7 — PMP data line 7 |
| פין 21 | PMA16 — PMP address line 16 |
| פין 22 | PMA17 — PMP address line 17 |
| פין 23 | VSS — Ground |
| פין 24 | VDD — Digital supply voltage |
| פין 25 | PMRD — PMP read strobe |
| פין 26 | PMWR — PMP write strobe |
| פין 27 | RF0 — General-purpose I/O |
| פין 28 | RF1 — General-purpose I/O |
| פין 29 | RF2 — General-purpose I/O |
| פין 30 | RF3 — General-purpose I/O |
| פין 31 | RF4 — General-purpose I/O |
| פין 32 | RF5 — General-purpose I/O |
| פין 33 | RF6 — General-purpose I/O |
| פין 34 | RF7 — General-purpose I/O |
| פין 35 | RF8 — General-purpose I/O |
| פין 36 | RF9 — General-purpose I/O |
| פין 37 | RF10 — General-purpose I/O |
| פין 38 | RF11 — General-purpose I/O |
| פין 39 | RF12 — General-purpose I/O |
| פין 40 | RF13 — General-purpose I/O |
| פין 41 | RD0 — General-purpose I/O / ICSP data |
| פין 42 | RD1 — General-purpose I/O / ICSP clock |
| פין 43 | RD2 — General-purpose I/O |
| פין 44 | RD3 — General-purpose I/O |
| פין 45 | RC1 — General-purpose I/O / U1TX |
| פין 46 | RC2 — General-purpose I/O / U1RX |
| פין 47 | RC3 — General-purpose I/O / U1RTS |
| פין 48 | RC4 — General-purpose I/O / U1CTS |
| פין 49 | RD4 — General-purpose I/O |
| פין 50 | RD5 — General-purpose I/O |
| פין 51 | RD6 — General-purpose I/O |
| פין 52 | RD7 — General-purpose I/O |
| פין 53 | RD8 — General-purpose I/O |
| פין 54 | RD9 — General-purpose I/O |
| פין 55 | RD10 — General-purpose I/O |
| פין 56 | RD11 — General-purpose I/O |
| פין 57 | VSS — Ground |
| פין 58 | VDD — Digital supply voltage |
| פין 59 | RD12 — General-purpose I/O |
| פין 60 | RD13 — General-purpose I/O |
| פין 61 | RD14 — General-purpose I/O |
| פין 62 | RD15 — General-purpose I/O |
| פין 63 | VUSB — USB transceiver supply, requires decoupling |
| פין 64 | VBUS — USB VBUS sensing input |
| פין 65 | VUSB3V3 — Internal USB 3.3V regulator output |
| פין 66 | D+ — USB data plus |
| פין 67 | D- — USB data minus |
| פין 68 | RC12 — General-purpose I/O |
| פין 69 | RC13 — General-purpose I/O |
| פין 70 | RC14 — General-purpose I/O / OSC2 |
| פין 71 | RC15 — General-purpose I/O / OSC1 |
| פין 72 | RA0 — General-purpose I/O / AN0 |
| פין 73 | RA1 — General-purpose I/O / AN1 |
| פין 74 | RA2 — General-purpose I/O / AN2 |
| פין 75 | RA3 — General-purpose I/O / AN3 |
| פין 76 | RA4 — General-purpose I/O / AN4 |
| פין 77 | RA5 — General-purpose I/O / AN5 |
| פין 78 | RA6 — General-purpose I/O / AN6 |
| פין 79 | RA7 — General-purpose I/O / AN7 |
| פין 80 | RA8 — General-purpose I/O / AN8 |
| פין 81 | RA9 — General-purpose I/O / AN9 |
| פין 82 | RA10 — General-purpose I/O / AN10 |
| פין 83 | RA11 — General-purpose I/O / AN11 |
| פין 84 | RA12 — General-purpose I/O / AN12 |
| פין 85 | RA13 — General-purpose I/O / AN13 |
| פין 86 | RA14 — General-purpose I/O / AN14 |
| פין 87 | RA15 — General-purpose I/O / AN15 |
| פין 88 | VSS — Ground |
| פין 89 | VDD — Digital supply voltage |
| פין 90 | RG2 — General-purpose I/O |
| פין 91 | RG3 — General-purpose I/O |
| פין 92 | RG6 — General-purpose I/O / CCP6 |
| פין 93 | RG7 — General-purpose I/O / CCP7 |
| פין 94 | RG8 — General-purpose I/O / CCP8 |
| פין 95 | RG9 — General-purpose I/O / CCP9 |
| פין 96 | MCLR — Master Clear reset input (active-low) |
| פין 97 | RG11 — General-purpose I/O |
| פין 98 | RB0 — General-purpose I/O / AN16 |
| פין 99 | RB1 — General-purpose I/O / AN17 |
| פין 100 | RB2 — General-purpose I/O / AN18 |
יישומים טיפוסיים
PIC24FJ128DA110T-I/PT מתאים עבור 6 יישוםs: WQVGA TFT Graphical HMI Panel, USB Medical Device (FDA Class I/II), Industrial HMI / Process Control Panel, USB-Connected Consumer Appliance, Point-of-Sale (POS) Terminal / Card Reader, Portable Data Acquisition Logger.
WQVGA TFT Graphical HMI Panel
The PIC24FJ128DA110T-I/PT is purpose-built for graphical HMI panels up to 4.3-inch WQVGA (480x272) TFT displays. Its integrated graphics controller drives TFT panels directly via the Parallel Master Port (PMP), eliminating the need for an external graphics controller ASIC and reducing BOM cost. The 128 KB Flash holds the Microchip Graphics Library plus assets, while the 32 MHz core sustains 60 fps redraws. The CTMU enables capacitive touch without external hardware, and USB OTG supports firmware updates and PC connectivity.
מומלץ
USB Medical Device (FDA Class I/II)
The PIC24FJ128DA110T-I/PT's integrated USB 2.0 Full-Speed OTG with on-chip transceiver supports CDC, HID, and MSD device classes required for medical device PC connectivity. Hardware AES-128/DES offloads encryption for HIPAA-compliant data transfer without burdening the CPU. The integrated 10-bit ADC with 16 channels supports vital-sign sensor front-ends. The 100-TQFP package simplifies hand-rework for prototype builds common in medical device development, and the industrial temperature range suits clinical equipment.
מומלץ
Industrial HMI / Process Control Panel
The PIC24FJ128DA110T-I/PT's 84 GPIO, hardware PMP, RTCC, and CTMU directly support industrial control panels with TFT displays, pushbuttons, and capacitive touch. The industrial -40C to +85C temperature range suits factory floor deployment. The 10-bit ADC supports analog sensor inputs from pressure, flow, and temperature transducers. The integrated graphics controller eliminates external display ASICs in compact DIN-rail mount designs.
מומלץ
USB-Connected Consumer Appliance
The PIC24FJ128DA110T-I/PT's USB OTG and graphics capability suit small consumer appliances with a TFT display and PC/phone connectivity. Examples include smart coffee makers, kitchen scales with USB charging, and personal care devices with graphical status displays. The hardware crypto engine protects firmware update flows, and the low-power sleep modes suit battery-powered variants. The 100-TQFP package is suitable for consumer production volumes with standard SMT lines.
מומלץ
Point-of-Sale (POS) Terminal / Card Reader
The PIC24FJ128DA110T-I/PT's USB OTG, hardware AES/DES, and integrated graphics controller support POS peripherals such as USB-connected customer-facing displays, EMV chip card readers, and signature capture pads. The hardware crypto engine accelerates PIN block encryption, and the integrated ADC reads keypad matrix inputs. The 24 KB RAM is sufficient for crypto buffers and USB descriptors, while 128 KB Flash accommodates USB stacks and POS application code.
מומלץ
Portable Data Acquisition Logger
The PIC24FJ128DA110T-I/PT's 16-channel 10-bit ADC, RTCC with timestamp, USB Mass Storage support, and 128 KB Flash suit portable data loggers with USB stick storage. The device's low-power sleep modes preserve battery life, and the integrated graphics controller supports small TFT displays for waveform or measurement visualization. CTMU provides capacitive touch for user input without extra components.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC24FJ128DA110T-I/PT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC24FJ128DA110-I/PT | PIC24FJ256DA110-I/PT | PIC24FJ128GA010-I/PT | PIC24FJ128DA110-I/BG |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (PT) | 100-TQFP (PT) - same | 100-TQFP (PT) - same | 100-TQFP (PT) - same | 121-BGA (BG) - different |
| Program Memory (Flash) | 128 KB | 128 KB | 256 KB | 128 KB | 128 KB |
| RAM Size | 24 KB | 24 KB | 24 KB | 8 KB | 24 KB |
| Maximum CPU Speed | 32 MHz (8 MIPS) | 32 MHz (8 MIPS) | 32 MHz (8 MIPS) | 32 MHz (8 MIPS) | 32 MHz (8 MIPS) |
| Integrated Graphics Controller | Yes (WQVGA) | Yes (WQVGA) | Yes (WQVGA) | No | Yes (WQVGA) |
| USB | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | No USB | USB 2.0 FS OTG |
| Number of I/O | 84 | 84 | 84 | 84 | 84 |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| CTMU (Capacitive Touch) | Yes | Yes | Yes | No | Yes |
מבדילים עיקריים
- Integrated graphics controller eliminates external display ASIC (לעומתPIC24FJ128GA010-I/PT)
- USB 2.0 Full-Speed OTG with on-chip transceiver (לעומתPIC24FJ128GA010-I/PT)
- Tape & Reel packaging suited for SMT production (לעומתPIC24FJ128DA110-I/PT)
הערות תכנון
The 100-TQFP package has 0.4 mm pitch, requiring 4 mil (0.1 mm) trace and space rules with reflow profile per J-STD-020. Place all decoupling capacitors (100 nF X7R + 4.7 uF bulk) within 3 mm of VDD/VSS pairs. For USB applications, route D+ and D- as a 90-ohm differential pair with length matching within 150 mil, and add external ESD protection (e.g., USBLC6-2SC6) directly at the connector. The VUSB pin requires a 1 uF + 100 nF decoupling network on its own ground reference.
Estimated: at 32 MHz CPU clock, full peripheral usage, and USB active, the PIC24FJ128DA110T-I/PT draws approximately 25-35 mA from a 3.3 V supply. For battery-powered designs, leverage the device's Deep Sleep mode (under 1 uA with RTCC active) for standby current reduction. Connect all VDD pins to a common supply and use a star-ground topology for the analog AVSS/AVDD pair if precision ADC readings are required.
Three common pitfalls: (1) Programming the device requires an ICSP-capable programmer (PICkit 3, PICkit 4, ICD 4, MPLAB SNAP) - in-circuit debugging uses the PGECx/PGEDx pins which must be accessible; (2) The 100-TQFP and 121-BGA packages of the DA110 share silicon but are NOT pin-compatible - do not assume BG can replace PT on the same PCB; (3) The graphics controller requires careful PMP pin assignment via PPS to avoid bus contention with peripherals.
For PMP-driven TFT panels, group PMDx, PMRD, PMWR, and PMA lines together with matched lengths to avoid display artifacts. Keep the analog AVSS pin tied to a quiet ground; isolate digital switching currents on VSS pins. Place the 32.768 kHz crystal within 5 mm of SOSCO/SOSCI with short traces and guard ring. For capacitive touch (CTMU), follow Microchip TB3069 layout guidelines - keep touch sensors trace-length matched and use grounded shielding on the PCB underside.
מידע על תאימות
RoHS and REACH compliant per Microchip product page. Industrial grade (I suffix, -40C to +85C). Not AEC-Q100 qualified - not for automotive safety applications. Lead-free and halogen-free packaging. Conflict minerals compliance declared per Microchip supplier disclosure.
