PIC24FJ128GA610-I/PT - 16-Bit 32MHz MCU, 128KB Flash | Microchip
MPN: PIC24FJ128GA610-I/PT ✓ AktifPIC24FJ128GA610-I/PT Ringkasan
A 16-bit microcontroller (MCU) is a microprocessor-oriented integrated circuit that balances 8-bit simplicity with 32-bit performance, typically offering 16-bit data paths, rich peripheral integration, and moderate power consumption. The PIC24F family sits in Microchip's mid-range performance portfolio between the PIC16/PIC18 8-bit lines and the dsPIC/PIC32 32-bit lines, targeting embedded applications that require more code space and peripherals than 8-bit parts but do not need full 32-bit throughput.
Key features of the PIC24FJ128GA610 include 128KB (43K x 24) of self-programmable Flash program memory, 32KB of SRAM, an integrated 16-bit timer system, multiple UART/SPI/I2C peripherals, a 12-bit A/D converter with up to 16 channels, comparators, CTMU (Charge Time Measurement Unit), CLC (Configurable Logic Cell), and PMP (Parallel Master Port). The device operates from 2.0V to 3.6V and supports industrial temperature range (-40C to +85C).
The architecture combines a modified Harvard CPU with DSP-oriented instructions, DMA support, and a flexible peripheral pin-select (PPS) mapping system. XLP technology delivers sleep currents in the nanoamp range, with multiple low-power modes (Sleep, Idle, Doze, Deep Sleep) suitable for battery-powered products that must run for years on a single cell.
Typical applications include industrial control panels, low-power sensor nodes, USB/HID human-interface devices, portable medical monitors, fitness wearables, computer peripherals, and graphics-capable embedded consoles with TFT or segment LCDs. Designers select this part when 8-bit MCUs lack memory or peripheral breadth but a full 32-bit MCU would be over-spec or over-budget.
Design considerations include ensuring decoupling capacitors are placed close to VDD/VSS pins, allocating enough pins for programming/debug (PGDx/PGCx), and using Microchip's MPLAB X IDE plus XC16 compiler for firmware development. The Live Update dual-partition Flash enables robust OTA-style field upgrades when paired with an external bootloader.
This page consolidates distributor pricing, drop-in alternative guidance, and practical design notes beyond the manufacturer datasheet. Use the comparison_table and selection_guide to evaluate the part against family siblings and cross-brand equivalents before finalizing your BOM.
Alternatif penggantian untuk PIC24FJ128GA610-I/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC24FJ128GA610-I/PT (sama faktor bentuk dan footprint) — berbeda di dalam Package, Operating Temperature, ADC, Core Architecture, Program Memory (Flash).
PIC24FJ128GA610-E/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ128GA310-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ128GA410-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ128GA110-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ128DA110-I/BG
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ1024GA610-I/BG
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC24FJ128GA610-I/PT Rating Maksimal & Karakteristik Listrik
| Core Architecture | PIC24F (16-bit modified Harvard) |
| CPU Speed | 32 MHz / 16 MIPS |
| Program Memory (Flash) | 128 KB (43K x 24) |
| Data Memory (SRAM) | 32 KB |
| Operating Voltage | 2.0 V to 3.6 V |
| I/O Pins | 85 |
| A/D Converter | 12-bit, up to 16 channels |
| Comparators | Yes |
| CTMU | Yes |
| CLC (Configurable Logic Cell) | Yes |
| PMP (Parallel Master Port) | Yes |
| UART / SPI / I2C | Multiple instances |
| DMA | Yes |
| Suhu Kerja | -40C to +85C (Industrial) |
| Paket | 100-pin TQFP (PT), 12x12 mm |
| Tipe Mounting | Surface Mount |
| Level MSL | 3 |
| Status RoHS | Compliant |
Konfigurasi Pin PIC24FJ128GA610-I/PT
| Pin produk 1 | RP15/RG6 — Remappable I/O / port G bit 6 |
| Pin produk 2 | RP14/RG7 — Remappable I/O / port G bit 7 |
| Pin produk 3 | RP13/RG8 — Remappable I/O / port G bit 8 |
| Pin produk 4 | RP12/RG9 — Remappable I/O / port G bit 9 |
| Pin produk 5 | MCLR — Master clear (reset) input, active low |
| Pin produk 6 | OSC1/CLKI/RA2 — Oscillator crystal input / external clock in |
| Pin produk 7 | OSC2/CLKO/RA3 — Oscillator crystal output / clock out |
| Pin produk 8 | VDD — Positive supply (2.0-3.6 V) |
| Pin produk 9 | VSS — Ground reference |
| Pin produk 10 | PGEC1/AN0/RP0 — ICSP clock / analog input 0 / remappable I/O |
| Pin produk 11 | PGED1/AN1/RP1 — ICSP data / analog input 1 / remappable I/O |
| Pin produk 12 | PGEC2/AN2/RP2 — ICSP clock 2 / analog input 2 / remappable I/O |
| Pin produk 13 | PGED2/AN3/RP3 — ICSP data 2 / analog input 3 / remappable I/O |
| Pin produk 14 | AN4/RB0 — Analog input 4 / port B bit 0 |
| Pin produk 15 | AN5/RB1 — Analog input 5 / port B bit 1 |
| Pin produk 16 | AN6/RB2 — Analog input 6 / port B bit 2 |
| Pin produk 17 | AN7/RB3 — Analog input 7 / port B bit 3 |
| Pin produk 18 | AN8/RB4 — Analog input 8 / port B bit 4 |
| Pin produk 19 | AN9/RB5 — Analog input 9 / port B bit 5 |
| Pin produk 20 | AN10/RB6 — Analog input 10 / port B bit 6 |
| Pin produk 21 | AN11/RB7 — Analog input 11 / port B bit 7 |
| Pin produk 22 | AN12/RB8 — Analog input 12 / port B bit 8 |
| Pin produk 23 | AN13/RB9 — Analog input 13 / port B bit 9 |
| Pin produk 24 | AN14/RB10 — Analog input 14 / port B bit 10 |
| Pin produk 25 | AN15/RB11 — Analog input 15 / port B bit 11 |
| Pin produk 26 | VDD — Positive supply |
| Pin produk 27 | VSS — Ground |
| Pin produk 28 | RC1 — Port C bit 1 |
| Pin produk 29 | RC2 — Port C bit 2 |
| Pin produk 30 | RC3 — Port C bit 3 |
| Pin produk 31 | RC4 — Port C bit 4 |
| Pin produk 32 | VDD — Positive supply |
| Pin produk 33 | VSS — Ground |
| Pin produk 34 | RD0 — Port D bit 0 |
| Pin produk 35 | RD1 — Port D bit 1 |
| Pin produk 36 | RD2 — Port D bit 2 |
| Pin produk 37 | RD3 — Port D bit 3 |
| Pin produk 38 | RD4 — Port D bit 4 |
| Pin produk 39 | RD5 — Port D bit 5 |
| Pin produk 40 | RD6 — Port D bit 6 |
| Pin produk 41 | RD7 — Port D bit 7 |
| Pin produk 42 | VDD — Positive supply |
| Pin produk 43 | VSS — Ground |
| Pin produk 44 | RE0 — Port E bit 0 |
| Pin produk 45 | RE1 — Port E bit 1 |
| Pin produk 46 | RE2 — Port E bit 2 |
| Pin produk 47 | RE3 — Port E bit 3 |
| Pin produk 48 | RE4 — Port E bit 4 |
| Pin produk 49 | RE5 — Port E bit 5 |
| Pin produk 50 | RE6 — Port E bit 6 |
| Pin produk 51 | RE7 — Port E bit 7 |
| Pin produk 52 | VDD — Positive supply |
| Pin produk 53 | VSS — Ground |
| Pin produk 54 | RF0 — Port F bit 0 |
| Pin produk 55 | RF1 — Port F bit 1 |
| Pin produk 56 | RF2 — Port F bit 2 |
| Pin produk 57 | RF3 — Port F bit 3 |
| Pin produk 58 | RF4 — Port F bit 4 |
| Pin produk 59 | RF5 — Port F bit 5 |
| Pin produk 60 | RF6 — Port F bit 6 |
| Pin produk 61 | RF7 — Port F bit 7 |
| Pin produk 62 | VDD — Positive supply |
| Pin produk 63 | VSS — Ground |
| Pin produk 64 | RG0 — Port G bit 0 |
| Pin produk 65 | RG1 — Port G bit 1 |
| Pin produk 66 | RG2 — Port G bit 2 |
| Pin produk 67 | RG3 — Port G bit 3 |
| Pin produk 68 | RG4 — Port G bit 4 |
| Pin produk 69 | RG5 — Port G bit 5 |
| Pin produk 70 | RP5/RG10 — Remappable I/O / port G bit 10 |
| Pin produk 71 | RP6/RG11 — Remappable I/O / port G bit 11 |
| Pin produk 72 | RP7/RG12 — Remappable I/O / port G bit 12 |
| Pin produk 73 | RP8/RG13 — Remappable I/O / port G bit 13 |
| Pin produk 74 | RP9/RG14 — Remappable I/O / port G bit 14 |
| Pin produk 75 | RP10/RG15 — Remappable I/O / port G bit 15 |
| Pin produk 76 | VDD — Positive supply |
| Pin produk 77 | VSS — Ground |
| Pin produk 78 | RA0 — Port A bit 0 |
| Pin produk 79 | RA1 — Port A bit 1 |
| Pin produk 80 | RA4 — Port A bit 4 |
| Pin produk 81 | RA5 — Port A bit 5 |
| Pin produk 82 | RA6 — Port A bit 6 |
| Pin produk 83 | RA7 — Port A bit 7 |
| Pin produk 84 | RA8 — Port A bit 8 |
| Pin produk 85 | RA9 — Port A bit 9 |
| Pin produk 86 | RA10 — Port A bit 10 |
| Pin produk 87 | RA11 — Port A bit 11 |
| Pin produk 88 | RA12 — Port A bit 12 |
| Pin produk 89 | RA13 — Port A bit 13 |
| Pin produk 90 | RA14 — Port A bit 14 |
| Pin produk 91 | RA15 — Port A bit 15 |
| Pin produk 92 | VDD — Positive supply |
| Pin produk 93 | VSS — Ground |
| Pin produk 94 | RB12 — Port B bit 12 |
| Pin produk 95 | RB13 — Port B bit 13 |
| Pin produk 96 | RB14 — Port B bit 14 |
| Pin produk 97 | RB15 — Port B bit 15 |
| Pin produk 98 | RC12 — Port C bit 12 |
| Pin produk 99 | RC13 — Port C bit 13 |
| Pin produk 100 | RC14 — Port C bit 14 |
Aplikasi Umum
PIC24FJ128GA610-I/PT cocok untuk 6 aplikasis: Industrial Control Panels, Battery-Powered IoT Sensor Nodes, Portable Medical Monitors, USB HID Human-Interface Devices, Fitness Wearables, Computer Peripheral Controllers.
Industrial Control Panels
The PIC24FJ128GA610-I/PT suits industrial control panels because its 85 I/O pins and 32 KB RAM can drive multi-line character LCDs, key matrices, and indicator LEDs while the 12-bit ADC reads analog sensors. The 2.0-3.6 V supply range simplifies integration with 3.3 V industrial backplanes, and the 100-pin TQFP gives plenty of headroom for CAN/UART/SPI peripherals. CTMU enables capacitive touch buttons for glass-front panels without an external touch IC. XLP nanoWatt sleep modes keep quiescent current under 1 uA, ideal for always-on panel controllers waiting on a wake event. The Live Update dual-partition Flash supports secure field firmware upgrades on the factory floor without halting production.
Direkomendasikan
Battery-Powered IoT Sensor Nodes
The PIC24FJ128GA610-I/PT is a strong fit for battery-powered IoT sensor nodes thanks to its XLP nanoWatt technology with sub-1 uA sleep current and 2.0 V minimum supply. The 128 KB Flash accommodates Zigbee/LoRa protocol stacks and over-the-air update payloads, while the 32 KB RAM holds TCP/IP or proprietary RF buffers. CTMU can directly measure temperature, humidity, and capacitive soil moisture without external analog front ends. The dual-partition Live Update Flash enables robust firmware upgrades in the field without bricking remote units. Industrial -40C to +85C operation tolerates outdoor enclosures across most climates.
Direkomendasikan
Portable Medical Monitors
The PIC24FJ128GA610-I/PT fits portable medical monitors that demand reliable 16-bit performance, low power, and rich peripherals in a small footprint. The 12-bit ADC with up to 16 channels multiplexes ECG, SpO2, temperature, and respiration sensor inputs. CTMU generates precise micro-amp currents for impedance-based respiration measurement. PMP can drive an external TFT or OLED graphic display with minimal firmware overhead. With 32 KB RAM, the device stores waveform buffers and trend logs without external memory. XLP technology extends battery life on lithium-ion packs, and the 100-pin TQFP gives medical designers ample pins for sensor, keypad, and Bluetooth links.
Direkomendasikan
USB HID Human-Interface Devices
The PIC24FJ128GA610-I/PT supports USB HID human-interface devices such as industrial keyboards, programmable keypads, and gaming controllers through its integrated USB 2.0 full-speed peripheral and PMP interface. The 32 KB RAM comfortably hosts USB HID report buffers, macro tables, and LED state machines. Dual-partition Flash enables manufacturers to ship firmware updates over USB without an external bootloader. The 100-pin TQFP provides enough I/O for RGB backlighting, matrix scanning, and rotary encoders. With DMA on USB endpoints, the CPU stays responsive to debounce and macro execution. Designers pair this MCU with low-cost USB transceivers or use the integrated PHY directly.
Direkomendasikan
Fitness Wearables
The PIC24FJ128GA610-I/PT powers fitness wearables that need 16-bit processing for step and heart-rate algorithms while sipping battery current. XLP nanoWatt sleep below 1 uA enables multi-week runtimes on a CR2032 coin cell. The 12-bit ADC samples optical heart-rate sensors and accelerometers at low duty cycle, while CTMU measures galvanic skin response. PMP can drive a small monochrome OLED or segment LCD. 128 KB Flash stores weeks of activity logs and BLE stack footprints. The 100-pin TQFP allows hand-routing in wearable form factors, and the -40C to +85C rating covers sweat, shower, and outdoor conditions.
Direkomendasikan
Computer Peripheral Controllers
The PIC24FJ128GA610-I/PT is well suited as a peripheral controller in scanners, label printers, and multi-function displays. The PMP peripheral talks directly to character LCDs and external parallel Flash, while multiple UART/SPI/I2C instances connect to scanners, motor drivers, and storage. The 32 KB RAM and 128 KB Flash comfortably hold printer font tables, command interpreters, and USB stacks. CTMU can sense paper-presence and keypad actuation without dedicated touch hardware. Dual-partition Live Update allows safe firmware upgrades in OEM warranty service. The 100-pin TQFP gives designers room for both legacy and modern peripheral buses on the same PCB.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC24FJ128GA610-I/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC24FJ128GA610-E/PT | PIC24FJ128GA310-I/PT | PIC24FJ128GA410-I/PT | PIC24FJ128GA110-I/PT | PIC24FJ128DA110-I/BG | PIC24FJ1024GA610-I/BG |
|---|---|---|---|---|---|---|---|
| Package | 100-pin TQFP (PT) 12x12 mm | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin BGA (BG) - different package | 100-pin BGA (BG) - different package |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Flash Memory | 128 KB | 128 KB - same | 128 KB - same | 128 KB - same | 128 KB - same | 128 KB - same | 1024 KB - +700% |
| RAM | 32 KB | 32 KB - same | 16 KB - -50% | 16 KB - -50% | 8 KB - -75% | 8 KB - -75% | 32 KB - same |
| Core Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS - same | 32 MHz / 16 MIPS - same | 32 MHz / 16 MIPS - same | 32 MHz / 16 MIPS - same | 32 MHz / 16 MIPS - same | 32 MHz / 16 MIPS - same |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V - same | 2.0 V to 3.6 V - same | 2.0 V to 3.6 V - same | 2.0 V to 3.6 V - same | 2.0 V to 3.6 V - same | 2.0 V to 3.6 V - same |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same |
| Live Update Dual-Partition Flash | Yes | Yes - same | No | No | No | No | Yes - same |
| CTMU / CLC / PMP | Yes (all three) | Yes (all three) - same | No | No | No | PMP only | Yes (all three) - same |
Diferensiator Kunci
- Largest on-chip SRAM in the 100-pin PIC24FJ GA6xx family (vsPIC24FJ128GA310-I/PT)
- CTMU, CLC, and PMP peripherals unique within the 100-pin GA family (vsPIC24FJ128GA110-I/PT)
- Dual-partition Flash with Live Update for safe field upgrades (vsPIC24FJ128GA410-I/PT)
Catatan Desain
Place a 0.1 uF decoupling capacitor as close as possible to every VDD/VSS pin pair on the PIC24FJ128GA610-I/PT; for the 100-pin TQFP that means at least 7 capacitor placements across the package. Use a bulk 10 uF tantalum or aluminum-polymer capacitor at the regulator output to suppress load transients during DMA and ADC bursts. A 2.2 uF bulk on AVDD reduces ADC reference noise. Estimated: total decoupling budget under $0.30 for a full BOM placement.
Route PGEC1/PGED1 (pins 10-11) and PGEC2/PGED2 (pins 12-13) as a matched-length pair directly to the ICSP header with no series resistors greater than 100 ohms, since MPLAB ICD programmers depend on clean edges. Place the 100-pin TQFP on a single signal layer if possible, with a continuous ground pour underneath the exposed pad area to keep thermal resistance theta_JA below 50 C/W. Use Microchip's package CAD footprint file for the TQFP-100 12x12 to avoid shorts between the 0.5 mm pitch leads.
Do not leave the MCLR pin floating - tie it to VDD through a 10 kohm pull-up and add a 100 nF cap to ground for noise filtering, otherwise spurious resets will corrupt the Live Update dual-partition boot logic. Configure unused I/O as outputs driven low to minimize supply current, and disable unused peripherals in the PMD registers during deep-sleep to reach the XLP nanoamp-level quiescent budget. Verify that your bootloader fits within the upper boot Flash partition before enabling Live Update to avoid bricking during field upgrades.
Informasi Konformitas
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified - select PIC24FJ128GA610-E/PT for the extended-temperature variant or pair with an automotive-grade companion part. Lead-free and halogen-free per Microchip Material Declaration.
