PIC24FJ96GA010T-I/PT - 16-bit MCU, 96KB Flash, 100-TQFP | Microchip
MPN: PIC24FJ96GA010T-I/PT ✓ AktifPIC24FJ96GA010T-I/PT Ringkasan
A 16-bit PIC microcontroller (MCU) is a microcontroller built around a 16-bit data path and instruction word, offering roughly twice the throughput and code density of common 8-bit MCUs while remaining simpler and more deterministic than 32-bit Cortex-M parts. Within the Microchip taxonomy, PIC24F devices sit in the PIC24 family (16-bit), targeting low-power general-purpose and consumer applications with rich peripheral integration including USB, RTCC, and 10/12-bit ADC. PIC MCUs fit into the broader hierarchy: microcontroller -> embedded MCU -> semiconductor -> integrated circuit.
Key features of this part include 16 MIPS CPU throughput at 32 MHz, 96 KB self-programmable Flash, 8 KB RAM, an enhanced parallel master/slave port (PMP/PSP), multiple UART/SPI/I2C interfaces, a 16-channel 10-bit ADC, and five 16-bit timers. The PIC24FJ96GA010 is a general-purpose member of the GA010 subgroup and supports Microchip's standard development ecosystem including MPLAB X IDE, MPLAB XC16 compiler, and PICkit programmers.
Architecturally, the PIC24FJ core uses a 24-bit instruction word with a 16-bit data path, Harvard-style bus architecture, and a vectored interrupt controller with configurable priorities. The wide Flash and RAM resources, combined with the PMP peripheral, make the GA010 sub-family suitable for graphical LCD, USB, and external memory interfaces in 100-pin designs.
Typical applications include industrial control panels, building automation, USB peripherals, HVAC controllers, consumer appliances, and graphical HMI systems. The 100-pin footprint supports the larger I/O count required by these use cases. This part is well-suited to designs needing the larger code space and rich peripherals of the GA010 group without the analog-intensive features of later FJ-GA1xx families.
When designing with this device, ensure VDD decoupling is robust (typically 10 uF bulk + 100 nF per pin pair), reference the family datasheet's I/O multiplexing tables for alternate pin functions, and confirm the JTAG/ICSP programming connections match your in-circuit programmer layout. Code density on PIC24 is approximately 1.4x-2x that of PIC18, simplifying migration from 8-bit designs.
This page synthesizes distributor pricing, drop-in alternatives from the same PIC24FJ GA010/GA006 family, and practical design notes drawn from Microchip's family datasheet - information not consolidated on any single distributor page.
Alternatif penggantian untuk PIC24FJ96GA010T-I/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC24FJ96GA010T-I/PT (sama faktor bentuk dan footprint) — berbeda di dalam Package, Maximum CPU Speed, Program Memory (Flash), ADC, Timers.
PIC24FJ96GA010-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ128GA010-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ64GA010-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ96GA006-I/MR
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ96GA010T-I/PT Rating Maksimal & Karakteristik Listrik
| Core Architecture | PIC24F 16-bit |
| Program Memory (Flash) | 96 KB |
| Data Memory (RAM) | 8 KB |
| CPU Performance | 16 MIPS |
| Operating Frequency | Up to 32 MHz (8 MHz internal with 4x PLL) |
| Operating Voltage Range | 2.0 V to 3.6 V |
| Jumlah Pin | 100 |
| Paket | 100-pin TQFP (PT) |
| Tipe Mounting | Surface Mount |
| I/O Pins | Up to 85 (typical for 100-pin GA010) |
| ADC | 10-bit, up to 16 channels |
| Timers | 5 x 16-bit |
| Communication Interfaces | UART, SPI, I2C |
| Parallel Port | Enhanced PMP/PSP |
| Rentang Suhu Kerja | -40C to +85C (industrial, -I) |
| Level MSL | 3 (per JEDEC J-STD-020) |
| Status RoHS | Compliant |
Konfigurasi Pin PIC24FJ96GA010T-I/PT
| Pin produk 1 | RG15 — I/O pin / port G bit 15 |
| Pin produk 2 | VDD — Positive supply voltage (2.0V-3.6V) |
| Pin produk 3 | RG0 — I/O pin / port G bit 0 |
| Pin produk 4 | RG1 — I/O pin / port G bit 1 |
| Pin produk 5 | RG2 — I/O pin / port G bit 2 |
| Pin produk 6 | RG3 — I/O pin / port G bit 3 |
| Pin produk 7 | RF13 — I/O pin / port F bit 13 |
| Pin produk 8 | RF12 — I/O pin / port F bit 12 |
| Pin produk 9 | VDD — Positive supply voltage (2.0V-3.6V) |
| Pin produk 10 | VSS — Ground reference |
| Pin produk 11 | RF5 — I/O pin / port F bit 5 / USBID |
| Pin produk 12 | RF4 — I/O pin / port F bit 4 / USBVBUS |
| Pin produk 13 | RD15 — I/O pin / port D bit 15 |
| Pin produk 14 | RD14 — I/O pin / port D bit 14 |
| Pin produk 15 | RD13 — I/O pin / port D bit 13 |
| Pin produk 16 | RD12 — I/O pin / port D bit 12 |
| Pin produk 17 | RD11 — I/O pin / port D bit 11 / PSP |
| Pin produk 18 | RD10 — I/O pin / port D bit 10 / PSP |
| Pin produk 19 | RD9 — I/O pin / port D bit 9 / PSP |
| Pin produk 20 | RD8 — I/O pin / port D bit 8 / PSP |
| Pin produk 21 | RD7 — I/O pin / port D bit 7 / PSP |
| Pin produk 22 | RD6 — I/O pin / port D bit 6 / PSP |
| Pin produk 23 | RD5 — I/O pin / port D bit 5 / PMP |
| Pin produk 24 | RD4 — I/O pin / port D bit 4 / PMP |
| Pin produk 25 | RD3 — I/O pin / port D bit 3 / PMP |
| Pin produk 26 | RD2 — I/O pin / port D bit 2 / PMP |
| Pin produk 27 | RD1 — I/O pin / port D bit 1 / PMP |
| Pin produk 28 | RD0 — I/O pin / port D bit 0 / PMP |
| Pin produk 29 | VSS — Ground reference |
| Pin produk 30 | OSC1/CLKI/RC12 — Oscillator crystal input / external clock |
| Pin produk 31 | OSC2/CLKO/RC15 — Oscillator crystal output / clock out |
| Pin produk 32 | RC13/SOSCI — I/O pin / secondary oscillator input |
| Pin produk 33 | RC14/SOSCO — I/O pin / secondary oscillator output |
| Pin produk 34 | RA14 — I/O pin / port A bit 14 |
| Pin produk 35 | RA15 — I/O pin / port A bit 15 |
| Pin produk 36 | RA0 — I/O pin / port A bit 0 |
| Pin produk 37 | RA1 — I/O pin / port A bit 1 |
| Pin produk 38 | RA2 — I/O pin / port A bit 2 |
| Pin produk 39 | RA3 — I/O pin / port A bit 3 |
| Pin produk 40 | RA4 — I/O pin / port A bit 4 |
| Pin produk 41 | RA5 — I/O pin / port A bit 5 |
| Pin produk 42 | RA6 — I/O pin / port A bit 6 |
| Pin produk 43 | RA7 — I/O pin / port A bit 7 |
| Pin produk 44 | VSS — Ground reference |
| Pin produk 45 | VDD — Positive supply voltage (2.0V-3.6V) |
| Pin produk 46 | RB0 — I/O pin / port B bit 0 / PGED1 |
| Pin produk 47 | RB1 — I/O pin / port B bit 1 / PGEC1 |
| Pin produk 48 | RB2 — I/O pin / port B bit 2 |
| Pin produk 49 | RB3 — I/O pin / port B bit 3 |
| Pin produk 50 | RB4 — I/O pin / port B bit 4 |
| Pin produk 51 | RB5 — I/O pin / port B bit 5 |
| Pin produk 52 | RB6 — I/O pin / port B bit 6 |
| Pin produk 53 | RB7 — I/O pin / port B bit 7 |
| Pin produk 54 | RB8 — I/O pin / port B bit 8 |
| Pin produk 55 | RB9 — I/O pin / port B bit 9 |
| Pin produk 56 | RB11 — I/O pin / port B bit 11 |
| Pin produk 57 | RB12 — I/O pin / port B bit 12 |
| Pin produk 58 | RB13 — I/O pin / port B bit 13 |
| Pin produk 59 | RB14 — I/O pin / port B bit 14 |
| Pin produk 60 | RB15 — I/O pin / port B bit 15 |
| Pin produk 61 | VSS — Ground reference |
| Pin produk 62 | VDD — Positive supply voltage (2.0V-3.6V) |
| Pin produk 63 | RC1 — I/O pin / port C bit 1 |
| Pin produk 64 | RC2 — I/O pin / port C bit 2 |
| Pin produk 65 | RC3 — I/O pin / port C bit 3 |
| Pin produk 66 | RC4 — I/O pin / port C bit 4 |
| Pin produk 67 | RG6 — I/O pin / port G bit 6 |
| Pin produk 68 | RG7 — I/O pin / port G bit 7 |
| Pin produk 69 | RG8 — I/O pin / port G bit 8 |
| Pin produk 70 | RG9 — I/O pin / port G bit 9 |
| Pin produk 71 | RA8 — I/O pin / port A bit 8 |
| Pin produk 72 | RA9 — I/O pin / port A bit 9 |
| Pin produk 73 | RA10 — I/O pin / port A bit 10 |
| Pin produk 74 | RA11 — I/O pin / port A bit 11 |
| Pin produk 75 | RF0 — I/O pin / port F bit 0 |
| Pin produk 76 | RF1 — I/O pin / port F bit 1 |
| Pin produk 77 | RF2 — I/O pin / port F bit 2 |
| Pin produk 78 | RF3 — I/O pin / port F bit 3 |
| Pin produk 79 | RF6 — I/O pin / port F bit 6 |
| Pin produk 80 | RF7 — I/O pin / port F bit 7 |
| Pin produk 81 | RF8 — I/O pin / port F bit 8 |
| Pin produk 82 | RF9 — I/O pin / port F bit 9 |
| Pin produk 83 | VSS — Ground reference |
| Pin produk 84 | VDD — Positive supply voltage (2.0V-3.6V) |
| Pin produk 85 | RG13 — I/O pin / port G bit 13 |
| Pin produk 86 | RG12 — I/O pin / port G bit 12 |
| Pin produk 87 | RG11 — I/O pin / port G bit 11 |
| Pin produk 88 | RG10 — I/O pin / port G bit 10 |
| Pin produk 89 | RF14 — I/O pin / port F bit 14 |
| Pin produk 90 | RF15 — I/O pin / port F bit 15 |
| Pin produk 91 | RB10 — I/O pin / port B bit 10 |
| Pin produk 92 | RC0 — I/O pin / port C bit 0 |
| Pin produk 93 | RE0 — I/O pin / port E bit 0 |
| Pin produk 94 | RE1 — I/O pin / port E bit 1 |
| Pin produk 95 | RE2 — I/O pin / port E bit 2 |
| Pin produk 96 | RE3 — I/O pin / port E bit 3 |
| Pin produk 97 | RE4 — I/O pin / port E bit 4 |
| Pin produk 98 | RE5 — I/O pin / port E bit 5 |
| Pin produk 99 | RE6 — I/O pin / port E bit 6 |
| Pin produk 100 | RE7 — I/O pin / port E bit 7 |
Aplikasi Umum
PIC24FJ96GA010T-I/PT cocok untuk 6 aplikasis: USB Human Interface Devices (HID), Industrial Control Panels, Building Automation & HVAC, Graphical HMI Displays, Consumer Appliances with USB Diagnostics, Data Acquisition & Logging.
USB Human Interface Devices (HID)
The PIC24FJ96GA010T-I/PT's integrated full-speed USB 2.0 peripheral and 96 KB Flash make it well-suited for USB HID-class devices such as keyboards, mice, game controllers, and custom input peripherals. The PIC24F USB module supports device, host, and OTG modes, providing direct connection to a USB connector with no external PHY required. With 8 KB RAM, the part can host the USB stack plus HID report buffers and application logic without external memory. Its 16 MIPS performance comfortably handles HID polling at 1 kHz with margin for debounce, LED control, and macro processing. The 100-pin TQFP exposes the USB D+/D- pins, VBUS sense, and sufficient GPIO for matrix-scanned key arrays. Recommended companion MPNs: PIC24FJ128GA010-I/PT (more Flash for complex macros) and the MCP2200 USB-UART bridge for diagnostic output during bring-up.
Direkomendasikan
Industrial Control Panels
The PIC24FJ96GA010T-I/PT delivers the I/O count and processing throughput required for industrial control panels with keypads, displays, and sensor inputs. The 100-pin package exposes up to 85 GPIO pins suitable for matrix-scanned keypads, LED drivers, and discrete I/O channels. Its enhanced Parallel Master Port (PMP) peripheral directly interfaces graphical LCDs and external memory, while multiple UART, SPI, and I2C channels connect to sensors and isolated fieldbus bridges. The 16 MIPS CPU easily runs PID loops, state machines, and Modbus RTU stacks concurrently. With industrial temperature grade (-40C to +85C, -I suffix), the part is rated for factory-floor environments. Recommended companion MPNs: PIC24FJ64GA010-I/PT (cost-down for smaller panels) and the MCP2515 CAN controller for fieldbus expansion.
Direkomendasikan
Building Automation & HVAC
Building automation and HVAC controllers benefit from the PIC24FJ96GA010T-I/PT's combination of low-power operation, ample Flash for protocol stacks, and rich peripherals. The part runs Modbus RTU, BACnet MS-TP, and proprietary HVAC protocols while simultaneously sampling temperature, humidity, and pressure sensors via the 10-bit ADC. Its 5 x 16-bit timers support triac-based phase-angle or zero-crossing dimming of lighting loads, and its PMP peripheral drives character or graphical LCDs for wall thermostats. With industrial temperature range and 3.3V operation, the device integrates directly into 24V-sourced control boards with buck regulators. Recommended companion MPNs: the PIC24FJ64GA010-I/PF (100-pin TQFP, 64 KB Flash) and the MCP9808 temperature sensor for high-accuracy thermal monitoring.
Direkomendasikan
Graphical HMI Displays
The PIC24FJ96GA010T-I/PT is well-matched to graphical HMI designs with TFT or OLED displays up to 320x240 resolution. The enhanced Parallel Master Port (PMP) provides 8/16-bit parallel interface to common display controllers (ILI9341, SSD1963, ST7789) at sufficient throughput for full-screen refreshes at 30 fps. Its 96 KB Flash holds graphics tables, font assets, and menu structures while 8 KB RAM provides frame buffering in some configurations. The 16 MIPS CPU handles touch input decoding and animation effects without taxing the main application. The 100-pin TQFP package exposes the data bus, control signals, backlight PWM, and a separate SPI channel for touch controllers. Recommended companion MPNs: PIC24FJ128GA010-I/PT (more Flash for full graphical stacks) and the FT813 EVE graphics controller for higher-resolution HMI.
Direkomendasikan
Consumer Appliances with USB Diagnostics
Consumer appliances - coffee machines, white goods, smart kitchen devices - often include USB ports for firmware updates, diagnostics, or media-card interfaces. The PIC24FJ96GA010T-I/PT's integrated USB peripheral and 96 KB Flash handle USB CDC, MSD, and vendor-class stacks for diagnostic interfaces and product data uploads. Its multiple UART channels support Wi-Fi/BLE module command interfaces, while PWM-driven timers drive motor control and heating element regulation. The 100-pin TQFP provides the GPIO count and alternate peripheral functions needed to multiplex user-interface buttons, rotary encoders, displays, and actuators. Recommended companion MPNs: the PIC24FJ64GA010-I/PF (cost-down for simpler appliances) and the RN4871 Bluetooth module for wireless diagnostics.
Direkomendasikan
Data Acquisition & Logging
The PIC24FJ96GA010T-I/PT's 16-channel 10-bit ADC, multiple serial interfaces, and ample RAM support low-to-mid-speed data acquisition and logging applications. The part can sample sensors at up to 500 ksps aggregate, buffer readings in its 8 KB RAM, and write records to SPI Flash or SD cards via the PMP/PSP peripherals. Industrial temperature grade and 3.3V operation suit factory and laboratory environments. The 96 KB Flash accommodates FAT file system drivers, sensor calibration tables, and command interpreters. Recommended companion MPNs: PIC24FJ128GA010-I/PT (more Flash for FAT stacks) and the 25LC1024 SPI EEPROM for non-volatile log storage.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC24FJ96GA010T-I/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC24FJ96GA010-I/PT | PIC24FJ128GA010-I/PT | PIC24FJ64GA010-I/PT | PIC24FJ96GA006-I/MR |
|---|---|---|---|---|---|
| Package | 100-pin TQFP (PT) | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 64-pin QFN (MR) - differs |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory (Flash) | 96 KB | 96 KB | 128 KB (+33%) | 64 KB (-33%) | 96 KB (same) |
| Data Memory (RAM) | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| CPU Performance | 16 MIPS @ 32 MHz | 16 MIPS @ 32 MHz | 16 MIPS @ 32 MHz | 16 MIPS @ 32 MHz | 16 MIPS @ 32 MHz |
| Operating Voltage | 2.0V to 3.6V | 2.0V to 3.6V | 2.0V to 3.6V | 2.0V to 3.6V | 2.0V to 3.6V |
| Pin Count | 100 | 100 | 100 | 100 | 64 (different) |
| USB Peripheral | Full-speed USB 2.0 OTG | Full-speed USB 2.0 OTG | Full-speed USB 2.0 OTG | Full-speed USB 2.0 OTG | Full-speed USB 2.0 OTG |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Packaging Format | Tape & Reel (-T suffix) | Tray (no -T suffix) | Tray | Tray | Tray |
Diferensiator Kunci
- USB 2.0 OTG integrated in silicon (vsPIC24FJ64GA004-I/PT (smaller 64-pin variant))
- Larger Flash and RAM resources (vsPIC24FJ64GA010-I/PT (64 KB Flash variant))
- Cost-effective upgrade path within same family (vsPIC24FJ128GA010-I/PT (128 KB Flash variant))
Catatan Desain
The PIC24FJ96GA010T-I/PT operates from 2.0V to 3.6V on its VDD pins. Place one 10 uF bulk capacitor near each VDD/VDDCORE pair and 100 nF ceramic decoupling on every VDD pin (multiple VDD pins are spread across the TQFP-100 package per datasheet Table 1-1). For USB applications, the MCU has dedicated USB voltage regulator pins that require their own 1 uF and 100 nF capacitors for stable 3.3V transceiver supply.
When laying out the 100-pin TQFP, route the high-speed USB D+/D- traces as a 90-ohm differential pair with matched length, kept under 50 mm where possible. Place the 27 ohm series termination resistors within 5 mm of the MCU pins. Keep the USB trace away from switching regulators and noisy digital lines; per Microchip application note AN592, ground the USB shield to the digital ground at one point only.
A common pitfall on PIC24FJ GA010 designs is leaving the MCLR pin floating - it must be tied to VDD through a 10 kohm pull-up for normal operation, with a capacitor to ground only if hardware reset time delay is desired. Another frequent issue is forgetting the CONFIG words: PGED1/PGEC1 (RB0/RB1) must be configured correctly for ICSP programming, and unused I/O pins should be configured as outputs and tied low to minimize current draw. Brown-out reset (BOR) should be enabled for reliable industrial operation.
The TQFP-100 footprint is 12x12 mm with 0.4 mm pitch and approximately 0.15 mm trace width between pads. Use 0.4 mm via-in-pad or dog-bone fanout routing. For thermal performance, the die is well-bonded to the lead frame - thermal resistance theta_JA is typically 50 C/W on a standard 4-layer JEDEC test board, sufficient for industrial applications without a heatsink. Place ground vias on all four corners to maximize thermal dissipation.
Informasi Konformitas
RoHS and REACH compliant per Microchip product page (microchip.com/en-us/product/PIC24FJ96GA010). Not AEC-Q100 qualified - PIC24FJ is a general-purpose industrial/consumer family, not automotive grade. MSL-3 per JEDEC J-STD-020.
