PIC24HJ64GP510A-E/PT - 16-bit 40MIPS MCU 64KB Flash TQFP-100 | Microchip
MPN: PIC24HJ64GP510A-E/PT ✓ AktifPIC24HJ64GP510A-E/PT Ringkasan
A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), working RAM, and a rich set of peripherals (timers, ADC, communication controllers, GPIO). The PIC24H family belongs to the 16-bit MCU class, sitting between 8-bit MCUs (PIC16/PIC18) and 32-bit MCUs (PIC32) in Microchip's portfolio. The 16-bit datapath doubles arithmetic throughput versus 8-bit parts while preserving deterministic interrupt latency and a simple programming model.
Key features include 64 KB (22K x 24 instruction words) of self-programmable Flash, 8 KB SRAM, a 16-channel 10/12-bit ADC with 500 ksps conversion rate, multiple UART/SPI/I2C/CAN interfaces, and a 16-bit timer/capture/PWM module set. The device has 85 I/O pins and operates from 3.0-3.6 V, consuming roughly 60 mA active at 40 MHz. DMA moves data between peripherals and memory without CPU intervention, freeing cycles for control loops. The Enhanced CAN (ECAN) module provides automotive bus connectivity.
The architecture combines a hardware multiply/divide unit with a 40 MHz oscillator and a PLL that yields zero-wait-state Flash execution. Compared with the older dsPIC30F family, the PIC24HJ family shares a high degree of peripheral compatibility, easing migration of legacy code while offering higher CPU throughput and lower active current. Boundary scan (JTAG) and 6 hardware breakpoints (with ordered halting) simplify in-circuit debug.
Typical applications include automotive body and chassis controllers, industrial motor drives, sensor fusion front-ends, HVAC control, solar inverter control loops, and uninterruptible power supply (UPS) digital control. The combination of DSP-grade math, on-chip CAN, and AEC-Q100 qualification also suits traction inverter sensor boards and battery management secondary protection circuits.
Designers should verify the 3.3 V rail decoupling network (typically 10 uF bulk plus 100 nF per VDD/AVDD pair) and keep analog/digital ground returns separated under the part. Programming uses ICSP via PGECx/PGEDx pins - ensure these are not multiplexed to noisy signals during development. This page aggregates distributor pricing, drop-in alternatives, and design notes not consolidated in the manufacturer datasheet.
Alternatif penggantian untuk PIC24HJ64GP510A-E/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC24HJ64GP510A-E/PT (sama faktor bentuk dan footprint) — berbeda di dalam ADC, Timers, Package, Core Architecture, Program Memory (Flash).
PIC24HJ128GP510A-E/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24HJ128GP510A-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24HJ256GP610A-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24HJ256GP610A-E/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC24HJ256GP210A-E/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →dsPIC33FJ64GP510A-I/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC24HJ64GP510A-E/PT Rating Maksimal & Karakteristik Listrik
| Core Architecture | PIC24H 16-bit modified Harvard |
| CPU Speed | 40 MIPS (max) |
| Program Memory (Flash) | 64 KB (22K x 24 instruction words) |
| Data RAM | 8 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| I/O Pins | 85 |
| ADC | 10/12-bit, 16 channels, 500 ksps |
| Communication Interfaces | UART, SPI, I2C, Enhanced CAN (ECAN) |
| Timers | 16-bit Timer/Capture/PWM modules |
| DMA | 8-channel peripheral DMA |
| Operating Temperature (E grade) | -40C to +125C |
| Paket | 100-pin TQFP (PT), 12x12 mm |
| Tipe Mounting | Surface Mount |
| Debug Interface | ICSP, JTAG boundary scan, 6 HW breakpoints |
| AEC-Q100 | Qualified (automotive) |
| Status RoHS | Compliant |
Konfigurasi Pin PIC24HJ64GP510A-E/PT
| Pin produk 1 | RG15 — GPIO port G bit 15 |
| Pin produk 2 | RC12 — GPIO port C bit 12 |
| Pin produk 3 | RC13 — GPIO port C bit 13 |
| Pin produk 4 | RC14 — GPIO port C bit 14 |
| Pin produk 5 | RC15 — GPIO port C bit 15 |
| Pin produk 6 | AVSS — Analog ground |
| Pin produk 7 | AVDD — Analog supply voltage |
| Pin produk 8 | MCLR — Master clear (reset) input, active-low |
| Pin produk 9 | OSC1 — Crystal oscillator input |
| Pin produk 10 | OSC2 — Crystal oscillator output |
| Pin produk 11 | VSS — Digital ground |
| Pin produk 12 | VDD — Digital supply voltage (3.3 V) |
| Pin produk 13 | PGEC2 — ICSP clock (alternate pair) |
| Pin produk 14 | PGED2 — ICSP data (alternate pair) |
| Pin produk 15 | RA0 — GPIO port A bit 0 / AN0 |
| Pin produk 16 | RA1 — GPIO port A bit 1 / AN1 |
| Pin produk 17 | RA2 — GPIO port A bit 2 / AN2 |
| Pin produk 18 | RA3 — GPIO port A bit 3 / AN3 |
| Pin produk 19 | RA4 — GPIO port A bit 4 / AN4 |
| Pin produk 20 | RA5 — GPIO port A bit 5 / AN5 |
| Pin produk 21 | VSS — Digital ground |
| Pin produk 22 | VDD — Digital supply voltage (3.3 V) |
| Pin produk 23 | RB0 — GPIO port B bit 0 / AN8 |
| Pin produk 24 | RB1 — GPIO port B bit 1 / AN9 |
| Pin produk 25 | RB2 — GPIO port B bit 2 / AN10 |
| Pin produk 26 | RB3 — GPIO port B bit 3 / AN11 |
| Pin produk 27 | RB4 — GPIO port B bit 4 / AN12 |
| Pin produk 28 | RB5 — GPIO port B bit 5 / AN13 |
| Pin produk 29 | RB6 — GPIO port B bit 6 / AN14 / PGEC1 |
| Pin produk 30 | RB7 — GPIO port B bit 7 / AN15 / PGED1 |
| Pin produk 31 | VSS — Digital ground |
| Pin produk 32 | VDD — Digital supply voltage (3.3 V) |
| Pin produk 33 | RC0 — GPIO port C bit 0 |
| Pin produk 34 | RC1 — GPIO port C bit 1 |
| Pin produk 35 | RC2 — GPIO port C bit 2 |
| Pin produk 36 | RC3 — GPIO port C bit 3 |
| Pin produk 37 | RC4 — GPIO port C bit 4 |
| Pin produk 38 | RC5 — GPIO port C bit 5 |
| Pin produk 39 | RC6 — GPIO port C bit 6 |
| Pin produk 40 | RC7 — GPIO port C bit 7 |
| Pin produk 41 | RC8 — GPIO port C bit 8 |
| Pin produk 42 | RC9 — GPIO port C bit 9 |
| Pin produk 43 | VSS — Digital ground |
| Pin produk 44 | VDD — Digital supply voltage (3.3 V) |
| Pin produk 45 | RD0 — GPIO port D bit 0 |
| Pin produk 46 | RD1 — GPIO port D bit 1 |
| Pin produk 47 | RD2 — GPIO port D bit 2 |
| Pin produk 48 | RD3 — GPIO port D bit 3 |
| Pin produk 49 | RD4 — GPIO port D bit 4 |
| Pin produk 50 | RD5 — GPIO port D bit 5 |
| Pin produk 51 | RD6 — GPIO port D bit 6 |
| Pin produk 52 | RD7 — GPIO port D bit 7 |
| Pin produk 53 | RD8 — GPIO port D bit 8 |
| Pin produk 54 | RD9 — GPIO port D bit 9 |
| Pin produk 55 | RD10 — GPIO port D bit 10 |
| Pin produk 56 | RD11 — GPIO port D bit 11 |
| Pin produk 57 | VSS — Digital ground |
| Pin produk 58 | VDD — Digital supply voltage (3.3 V) |
| Pin produk 59 | RF0 — GPIO port F bit 0 |
| Pin produk 60 | RF1 — GPIO port F bit 1 |
| Pin produk 61 | RF2 — GPIO port F bit 2 |
| Pin produk 62 | RF3 — GPIO port F bit 3 |
| Pin produk 63 | RF4 — GPIO port F bit 4 |
| Pin produk 64 | RF5 — GPIO port F bit 5 |
| Pin produk 65 | RF6 — GPIO port F bit 6 |
| Pin produk 66 | RF7 — GPIO port F bit 7 |
| Pin produk 67 | RF8 — GPIO port F bit 8 |
| Pin produk 68 | VSS — Digital ground |
| Pin produk 69 | VDD — Digital supply voltage (3.3 V) |
| Pin produk 70 | RE0 — GPIO port E bit 0 |
| Pin produk 71 | RE1 — GPIO port E bit 1 |
| Pin produk 72 | RE2 — GPIO port E bit 2 |
| Pin produk 73 | RE3 — GPIO port E bit 3 |
| Pin produk 74 | RE4 — GPIO port E bit 4 |
| Pin produk 75 | RE5 — GPIO port E bit 5 |
| Pin produk 76 | RE6 — GPIO port E bit 6 |
| Pin produk 77 | RE7 — GPIO port E bit 7 |
| Pin produk 78 | VSS — Digital ground |
| Pin produk 79 | VDD — Digital supply voltage (3.3 V) |
| Pin produk 80 | RG0 — GPIO port G bit 0 |
| Pin produk 81 | RG1 — GPIO port G bit 1 |
| Pin produk 82 | RG2 — GPIO port G bit 2 |
| Pin produk 83 | RG3 — GPIO port G bit 3 |
| Pin produk 84 | RG4 — GPIO port G bit 4 |
| Pin produk 85 | RG6 — GPIO port G bit 6 |
| Pin produk 86 | RG7 — GPIO port G bit 7 |
| Pin produk 87 | RG8 — GPIO port G bit 8 |
| Pin produk 88 | RG9 — GPIO port G bit 9 |
| Pin produk 89 | VSS — Digital ground |
| Pin produk 90 | VDD — Digital supply voltage (3.3 V) |
| Pin produk 91 | RA6 — GPIO port A bit 6 / OSC2 alt |
| Pin produk 92 | RA7 — GPIO port A bit 7 / OSC1 alt |
| Pin produk 93 | RA9 — GPIO port A bit 9 |
| Pin produk 94 | RA10 — GPIO port A bit 10 |
| Pin produk 95 | RA11 — GPIO port A bit 11 |
| Pin produk 96 | RA12 — GPIO port A bit 12 |
| Pin produk 97 | RA13 — GPIO port A bit 13 |
| Pin produk 98 | RA14 — GPIO port A bit 14 |
| Pin produk 99 | RA15 — GPIO port A bit 15 |
| Pin produk 100 | RG12 — GPIO port G bit 12 |
Aplikasi Umum
PIC24HJ64GP510A-E/PT cocok untuk 7 aplikasis: Automotive Body Control Module, Industrial Motor Drive (BLDC/PMSM), Solar Inverter Control Board, HVAC Climate Control Unit, Battery Management Secondary Protection, Sensor Aggregation / IoT Edge Node, Uninterruptible Power Supply (UPS) Digital Controller.
Automotive Body Control Module
The PIC24HJ64GP510A-E/PT's AEC-Q100 qualification, 40 MIPS throughput, and on-chip Enhanced CAN module make it a strong fit for body controllers that aggregate lighting, mirror, and accessory functions across a CAN bus. Its 64 KB Flash stores the application state machine plus LIN/CAN stacks, while 85 GPIO directly drive LED drivers and relay coils. The -40C to +125C extended temperature grade permits under-dash mounting where summer cabin temperatures exceed 85C.
Direkomendasikan
Industrial Motor Drive (BLDC/PMSM)
Field-oriented control of a 3-phase PMSM at 20 kHz PWM needs a CPU that handles Clark/Park transforms inside each cycle, and the PIC24HJ64GP510A-E/PT's 40 MIPS headroom plus 16-bit PWM with complementary outputs and 500 ksps ADC fits this well. The DMA moves current-sense samples from the ADC to RAM without CPU involvement, freeing cycles for control math. The TQFP-100 footprint exposes all needed PWMs, QEI inputs, and ADC channels on a single device.
Direkomendasikan
Solar Inverter Control Board
In a single-stage or two-stage solar inverter, the PIC24HJ64GP510A-E/PT performs MPPT, grid synchronization, and inverter control from the 64 KB Flash firmware image. The 16-bit timer/PWM blocks generate the 50/60 Hz sine-modulated switching at typical 16-20 kHz, while the 10/12-bit ADC samples the inductor current and PV string voltage for the MPPT algorithm. AEC-Q100 screening plus the -40C to +125C grade lets the same firmware ship in outdoor string inverter enclosures.
Direkomendasikan
HVAC Climate Control Unit
Roof-top and commercial HVAC controllers use the PIC24HJ64GP510A-E/PT to run PID loops for temperature, humidity, and damper position. The 85 GPIO handle keypad inputs, LCD drive, and relay outputs; ECAN links the unit to a building automation bus. The 64 KB Flash is sufficient for a full control state machine plus a UI layer, while 8 KB RAM keeps smooth display refresh. AEC-Q100 and 125C support enable rooftop and under-hood automotive HVAC deployments.
Direkomendasikan
Battery Management Secondary Protection
In a Li-ion battery pack, the PIC24HJ64GP510A-E/PT acts as a secondary protector that monitors cell voltages via the on-chip ADC and disconnects the contactor on over-/under-voltage events, independent of the main BMS. The 8 KB RAM supports a moving-window statistics buffer per cell, while ECAN or UART reports fault status to the main BMS. AEC-Q100 grade and the TQFP-100 footprint are appropriate for automotive 12 V/48 V battery packs.
Direkomendasikan
Sensor Aggregation / IoT Edge Node
Industrial sensor nodes aggregate Modbus, I2C sensor, and analog inputs back to a gateway using the PIC24HJ64GP510A-E/PT. The device's 16-channel ADC and multiple UART/SPI/I2C ports handle dozens of sensors, and 64 KB Flash stores the protocol stack, while 8 KB RAM buffers periodic telemetry. The 3.3 V supply domain and 100-pin TQFP package fit on a 4-layer 50 mm x 50 mm PCB, and the extended temperature range supports outdoor enclosures.
Direkomendasikan
Uninterruptible Power Supply (UPS) Digital Controller
A line-interactive or online UPS uses the PIC24HJ64GP510A-E/PT to run the inverter control loop, sine-wave reference, and battery-state logic. The 16-bit PWM generates the 50/60 Hz sine PWM, the ADC samples battery voltage and load current, and ECAN/UART connects to a network management card. The 40 MIPS throughput leaves margin for cryptographic signed firmware updates inside the 64 KB Flash budget, and the AEC-Q100 grade supports harsh industrial environments.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC24HJ64GP510A-E/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC24HJ128GP510A-E/PT | PIC24HJ128GP510A-I/PT | PIC24HJ256GP610A-I/PT | dsPIC33FJ64GP510A-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (PT) 12x12 mm | TQFP-100 (PT) 12x12 mm | TQFP-100 (PT) 12x12 mm | TQFP-100 (PT) 12x12 mm | TQFP-100 (PT) 12x12 mm |
| Flash Memory | 64 KB | 128 KB (+100%) | 128 KB (+100%) | 256 KB (+300%) | 64 KB (same) |
| RAM | 8 KB | 8 KB (same) | 8 KB (same) | 16 KB (+100%) | 8 KB (same) |
| CPU Speed | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| DSP Engine | No (PIC24H) | No | No | No | Yes (dsPIC33F adds MAC) |
| AEC-Q100 | Qualified (E grade) | Qualified (E grade) | Not (I grade -40C/+85C) | Not (I grade) | Not (I grade) |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +85C | -40C to +85C | -40C to +85C |
| CAN Bus | ECAN | ECAN | ECAN | ECAN | ECAN |
Diferensiator Kunci
- AEC-Q100 qualified in TQFP-100 (vsPIC24HJ128GP510A-I/PT)
- Drop-in compatible with PIC24HJ128 family (vsPIC24HJ128GP510A-E/PT)
- DSP-free architecture for simpler code base (vsdsPIC33FJ64GP510A-I/PT)
Catatan Desain
Estimated: The PIC24HJ64GP510A-E/PT draws about 60 mA active at 40 MHz from a 3.3 V rail. Use one 10 uF X7R bulk capacitor plus a 100 nF X7R decoupling cap on every VDD/AVDD pair (the TQFP-100 has 5 VDD and 5 VSS pins, plus one AVDD/AVSS pair). Keep the analog supply star-routed to the ADC reference to avoid digital switching noise coupling into ADC samples. Place bulk capacitors within 10 mm of the MCU and 100 nF caps within 2-3 mm of each VDD pin.
The TQFP-100 (12x12 mm) package has 0.5 mm pitch leads. Use a 4-layer PCB with a dedicated ground plane beneath the MCU, and route the ICSP pair (PGEC1/PGED1 on RB6/RB7) directly to a 6-pin header with no series resistors in the path. The crystal traces (OSC1/OSC2) should be short and guarded by ground, with the load capacitors placed within 3 mm of the oscillator pins. Add a 4.7 kohm pull-up on MCLR tied to VDD through a 1 nF decoupling cap to enable in-circuit reset.
Do not tie unused I/O pins to ground directly - they should be configured as outputs and left open, or set as inputs with the internal weak pull-up enabled to avoid current injection through floating gates. Never pull MCLR directly to VDD without a series resistor; without the resistor, ICSP programming cannot reset the device. Always disable the JTAG port if unused, by clearing the JTAGEN fuse, to recover those pins for GPIO. When migrating from PIC24HJ to dsPIC33F (e.g. dsPIC33FJ64GP510A-I/PT), recompile with the dsPIC33 toolchain library to enable DSP intrinsics.
Informasi Konformitas
AEC-Q100 qualified per Microchip product page; -E grade temperature range -40C to +125C. RoHS and REACH compliant per DigiKey product listing. Halogen-free per Microchip environmental compliance documentation.
