PIC32MX130F256B-50I/SP - 50MHz 32-bit MCU 256KB Flash 28-SPDIP | Microchip
MPN: PIC32MX130F256B-50I/SP ✓ AktifPIC32MX130F256B-50I/SP Ringkasan
A 32-bit microcontroller (MCU) is a programmable logic device built around a 32-bit data path, instruction pipeline and address space, in contrast to 8-bit or 16-bit MCUs. The PIC32MX1XX/2XX family belongs to the broader hierarchy MCU -> microcontroller -> embedded controller -> semiconductor IC, and is intended for connected, low-power, mixed-signal embedded designs. The M4K core is a MIPS32 instruction-set RISC processor with hardware multiply/divide and a 5-stage pipeline; this combination gives PIC32MX parts their distinctive price/performance position versus Cortex-M0/M3 alternatives.
Key features that differentiate the PIC32MX130F256B include 256 KB flash for application code, 16 KB SRAM for data, a Charge Time Measurement Unit (CTMU) for mTouch capacitive touch and 1 ns high-resolution time measurement, and a USB 2.0 full-speed OTG peripheral on the larger-pin variants. The 28-SPDIP package exposes 21 general-purpose I/O pins through the PPS mapper, so almost any digital peripheral function can be routed to almost any pin - a flexibility advantage versus fixed-pin MCUs. The integrated 10-bit 1 Msps ADC with up to 13 analog channels supports mixed-signal sensing without an external converter.
Architecturally, the part uses a single-cycle 32-bit ALU with hardware MAC for DSP-style operations, 32 KB instruction cache to accelerate flash execution, and a bus matrix that lets DMA and the CPU access peripherals in parallel. Compared with 8-bit PIC16/PIC18 parts running at the same clock, the M4K core delivers roughly 10x more DMIPS per MHz, so designers can either drop clock frequency to save power or run complex TCP/IP and USB stacks that simply do not fit on an 8-bit MCU.
Typical applications include USB human-interface devices, mTouch capacitive touch panels, low-cost graphics with PMP, audio codec front-ends via I2S, and general-purpose connected sensor nodes. Industrial automation HMI panels and consumer appliances also benefit from the 5V-tolerant I/O on many pins of the SPDIP variant.
When designing with this part, remember that the SPDIP package is intended for through-hole prototyping, hand-repair-friendly designs, and harsh-environment sockets where mechanical retention matters. Decouple VDD with a 100 nF ceramic plus a 4.7 uF bulk cap placed within 5 mm of the pins, and configure the Configuration Words in code so the device does not latch up on first power-up. The PPS mapper must be unlocked before peripheral remapping takes effect.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the PIC32MX130F256B-50I/SP that are not assembled in the manufacturer datasheet alone.
Alternatif penggantian untuk PIC32MX130F256B-50I/SP — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC32MX130F256B-50I/SP (sama faktor bentuk dan footprint) — berbeda di dalam Package, Operating Temperature, USB, ADC, Mounting Type.
PIC32MX130F256B-I/SP
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MX150F256B-50I/SP
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MX170F256B-50I/SP
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX130F256B-50I/SS
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX130F256BT-50I/SP
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MX130F256B-V/SP
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC32MX130F256B-50I/SP Rating Maksimal & Karakteristik Listrik
| Core | MIPS32 M4K 32-bit RISC |
| Maximum CPU Speed | 50 MHz (83 DMIPS) |
| Program Memory (Flash) | 256 KB (256K x 8) |
| Data Memory (SRAM) | 16 KB |
| Paket | 28-pin SPDIP (0.300 inch, 7.62 mm) |
| Jumlah Pin | 28 |
| Supply Voltage (VDD) | 2.3 V to 3.6 V |
| I/O Pins | 21 |
| ADC | 10-bit, up to 1 Msps |
| ADC Channels | Up to 13 analog inputs |
| I2S/SPI Modules | 2 |
| UART Modules | Up to 2 |
| I2C Modules | Up to 2 |
| Timers | 5 16-bit or 2 16-bit + 1 32-bit |
| Suhu Kerja | -40 C to +85 C (Industrial, -I suffix) |
| Active Current | 0.5 mA/MHz typical |
| Peripheral Pin Select (PPS) | Yes |
| Parallel Master Port (PMP) | Yes |
| CTMU (mTouch / 1 ns time measurement) | Yes |
| Tipe Mounting | Through-Hole |
| Status RoHS | Compliant |
Konfigurasi Pin PIC32MX130F256B-50I/SP
| Pin produk 1 | MCLR — Master Clear (reset) input, active low |
| Pin produk 2 | RA0 — I/O port A bit 0 (also PGED1/AN0/CMP1/CTED1) |
| Pin produk 3 | RA1 — I/O port A bit 1 (also PGEC1/AN1/CMP2/CTED2) |
| Pin produk 4 | RB0 — I/O port B bit 0 (also AN2/C1IN-/CVREF/RP0) |
| Pin produk 5 | RB1 — I/O port B bit 1 (also AN3/C1IN+/C2IN+/RP1) |
| Pin produk 6 | RB2 — I/O port B bit 2 (also AN4/C1IN-/C2IN-/RP2) |
| Pin produk 7 | RB3 — I/O port B bit 3 (also AN5/C1OUT/RP3) |
| Pin produk 8 | VSS — Ground reference |
| Pin produk 9 | RB4 — I/O port B bit 4 (also AN6/C2OUT/RP4) |
| Pin produk 10 | RB5 — I/O port B bit 5 (also AN7/RP5) |
| Pin produk 11 | RB6 — I/O port B bit 6 (also PGEC2/RP6) |
| Pin produk 12 | RB7 — I/O port B bit 7 (also PGED2/RP7) |
| Pin produk 13 | RA2 — I/O port A bit 2 (also OCM1/RP8) |
| Pin produk 14 | RA3 — I/O port A bit 3 (also OCM2/RP9) |
| Pin produk 15 | RA4 — I/O port A bit 4 (also OC4/RP10) |
| Pin produk 16 | RA5 — I/O port A bit 5 (also OCM5/RP11) |
| Pin produk 17 | RA6 — I/O port A bit 6 (also OCM6/RP12) |
| Pin produk 18 | RA7 — I/O port A bit 7 (also OC7/RP13) |
| Pin produk 19 | VSS — Ground reference |
| Pin produk 20 | VDD — Positive supply voltage (2.3V to 3.6V) |
| Pin produk 21 | RB8 — I/O port B bit 8 (also AN8/RP14) |
| Pin produk 22 | RB9 — I/O port B bit 9 (also AN9/RP15) |
| Pin produk 23 | RB10 — I/O port B bit 10 (also CVREF10/AN10/RP16) |
| Pin produk 24 | RB11 — I/O port B bit 11 (also AN11/RP17) |
| Pin produk 25 | RB12 — I/O port B bit 12 (also AN12/RP18) |
| Pin produk 26 | RB13 — I/O port B bit 13 (also AN13/RP19) |
| Pin produk 27 | RB14 — I/O port B bit 14 (also CVREF14/AN14/RP20) |
| Pin produk 28 | RB15 — I/O port B bit 15 (also AN15/OCFA/RP21) |
Aplikasi Umum
PIC32MX130F256B-50I/SP cocok untuk 6 aplikasis: USB Human Interface Devices (HID), mTouch Capacitive Touch Panels, Industrial Sensor Hubs and HMI, Audio Codec Front-Ends (I2S), Low-Cost Graphics with PMP, Connected Sensor Nodes and IoT Endpoints.
USB Human Interface Devices (HID)
The PIC32MX130F256B-50I/SP suits USB HID peripherals such as keyboards, mice, game controllers, and custom input devices when paired with an external USB-serial bridge like the MCP2200. With 256 KB flash and 16 KB SRAM, the part has ample headroom for USB HID class descriptors, HID report parsing, and feature-rich firmware including macros and lighting control. The 50 MHz MIPS M4K core delivers 83 DMIPS, sufficient to debounce switches, sample capacitive touch, and execute composite HID reports (keyboard + mouse + consumer control) simultaneously. Place a 100 nF decoupling capacitor within 5 mm of each VDD pin and route the D+/D- lines to the bridge IC as a differential pair.
Direkomendasikan
mTouch Capacitive Touch Panels
The PIC32MX130F256B-50I/SP integrates Microchip's CTMU (Charge Time Measurement Unit), which enables mTouch capacitive touch buttons, sliders, and proximity sensors with 1 ns time measurement resolution. This eliminates the need for an external touch controller IC, reducing BOM cost on small keypads, appliance front panels, and consumer devices. The CTMU drives the sense electrodes directly via I/O pins and measures the discharge timing through the internal ADC, giving reliable touch detection through up to 3 mm of glass or acrylic. With 21 I/O pins available on the SPDIP package, a 12-button keypad plus 4-LED backlight plus UART debug channel fits comfortably.
Direkomendasikan
Industrial Sensor Hubs and HMI
Industrial sensor hubs and HMI panels benefit from the PIC32MX130F256B-50I/SP's industrial -40C to +85C temperature range, 256 KB flash for protocol stacks, and the Parallel Master Port (PMP) for driving small TFT/LCD graphical displays. The 10-bit ADC handles 4-20 mA loop and 0-10 V sensor interfaces without an external converter, and the 5 timer/capture modules support PWM-driven buzzer/motor control and quadrature encoder inputs. For panel meters, the 32-bit CPU runs the float-point HVAC control loop while the PMP continuously refreshes the LCD. The two I2S/SPI ports handle audio codecs or external sensor chips simultaneously.
Direkomendasikan
Audio Codec Front-Ends (I2S)
The PIC32MX130F256B-50I/SP's dual I2S/SSI modules let it act as a front-end controller for audio codecs in sound bars, intercoms, and hearing-aid accessories. The 50 MHz MIPS M4K core can drive a 48 kHz stereo I2S stream while simultaneously decoding MP3 or AAC from SPI flash with comfortable CPU headroom. The 16 KB SRAM fits several hundred milliseconds of buffered audio for level smoothing and compressor functions. For higher sample-rate designs (96 kHz, 192 kHz) the PIC32MX170 with DMA-driven I2S is preferred, but at standard 48 kHz the PIC32MX130 is more than capable.
Direkomendasikan
Low-Cost Graphics with PMP
The PIC32MX130F256B-50I/SP's Parallel Master Port (PMP) drives small graphical TFT displays (up to QVGA 320x240 with external frame buffer) for low-cost HMI panels, e-reader front-ends, and simple graphical control surfaces. The PMP transfers a full row of pixel data in a single cycle, so the 50 MHz core can refresh a 320x240 RGB565 display at over 30 fps when paired with an SPI-based frame buffer. Compared to using SPI alone, the PMP interface gives a 4-8x throughput improvement, enabling animations and smooth touch response. The 256 KB flash holds the small embedded graphics library plus the application UI.
Direkomendasikan
Connected Sensor Nodes and IoT Endpoints
The PIC32MX130F256B-50I/SP fits battery-powered connected sensor nodes where modest compute headroom is needed for sensor fusion, local decision making, and protocol framing. Combined with an external sub-GHz transceiver (e.g., MRF89XA) or Wi-Fi module (e.g., ATWINC1500), the MCU serves as the application processor that samples sensors via the 10-bit ADC, processes data locally with the MIPS M4K core, and forwards alerts over UART/SPI. The deep-sleep mode plus peripheral activity gating keeps average current under 1 mA in typical duty-cycled designs, so 2xAA batteries can power the node for months. The 256 KB flash accommodates full LoRaWAN or MQTT-SN client stacks.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC32MX130F256B-50I/SP — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC32MX130F256B-I/SP | PIC32MX150F256B-50I/SP | PIC32MX170F256B-50I/SP | PIC32MX130F256B-50I/SS |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-SPDIP | 28-SPDIP - same | 28-SPDIP - same | 28-SPDIP - same | 28-SSOP - footprint differs |
| Maximum Clock Speed | 50 MHz (83 DMIPS) | 40 MHz (-20%) | 50 MHz (same) | 50 MHz (same) | 50 MHz (same) |
| Flash Memory | 256 KB | 256 KB (same) | 256 KB (same) | 256 KB (same) | 256 KB (same) |
| SRAM | 16 KB | 16 KB (same) | 16 KB (same) | 16 KB (same) | 16 KB (same) |
| ADC | 10-bit, 1 Msps | 10-bit (same) | 10-bit, 12-bit option on larger pin variants | 10-bit, 12-bit option on larger pin variants | 10-bit (same) |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C (same) | -40 C to +85 C (same) | -40 C to +85 C (same) | -40 C to +85 C (same) |
| I/O Pins | 21 | 21 (same) | 21 (same) | 21 (same) | 21 (same) |
| USB Peripheral | No | No | No (only on 64-pin variants) | Yes (on 64-pin variants) | No |
Diferensiator Kunci
- Through-hole 28-SPDIP industrial-grade option (vsPIC32MX130F256B-50I/SS)
- Firmware-compatible upgrade path with more peripherals (vsPIC32MX150F256B-50I/SP)
- 50 MHz speed grade vs 40 MHz baseline (vsPIC32MX130F256B-I/SP)
Catatan Desain
The PIC32MX130F256B-50I/SP operates from a single 2.3V to 3.6V supply on the VDD pin, drawing 0.5 mA/MHz typical active current. Estimated: at 50 MHz with all peripherals active, core current is ~25 mA; add another 20-30 mA for I/O switching and analog blocks. Place a 100 nF ceramic decoupling capacitor within 5 mm of each VDD pin and a 4.7 uF bulk capacitor at the board supply input. For low-noise analog work, use a separate LDO (e.g., MCP1700) for the analog VDD rail even though the SPDIP-28 only exposes one VDD pin.
The SPDIP-28 footprint is 0.300 inch (7.62 mm) row spacing with 0.100 inch (2.54 mm) pitch. Route the ICSP programming pins (PGEC1/PGED1 on RA0/RA1) directly to a 6-pin header with no series components, since in-circuit programming requires direct access to these pins. Keep crystal traces short (under 10 mm) and surround the OSC1/OSC2 pins with a ground pour to minimize EMI pickup. Place the bulk decoupling capacitor near the VDD pin, and provide a ground-return path directly under the MCU for return currents.
Do not skip the Configuration Word setup in firmware - leaving the default Configuration Words causes the device to latch up on first power-up or fail to start the oscillator. The Peripheral Pin Select (PPS) registers must be unlocked (CFG_PPS) before any peripheral remapping takes effect; otherwise the peripheral output simply does not appear on the chosen pin. Do not assume a 50 MHz crystal will work in all board layouts - if the load capacitance is mismatched the oscillator can fail to start at low temperature. Always tie MCLR high through a 10 kohm pull-up and provide a 100 nF cap on MCLR for clean reset.
Informasi Konformitas
RoHS and REACH compliant per Microchip product page. Halogen-free SPDIP-28 package. No AEC-Q100 grade available on this MPN - automotive designs should select PIC32MX1XX/2XX AEC-Q100 qualified variants. Lead-free reflow-compatible packaging.
