PIC32MX320F128HT-80I/PT - 80MHz 32-bit MCU 128KB Flash | Microchip
MPN: PIC32MX320F128HT-80I/PT ✓ AktifPIC32MX320F128HT-80I/PT Ringkasan
A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, Flash program memory, SRAM data memory, and a rich set of on-chip peripherals (ADC, timers, USB, UART, SPI, I2C). PIC32MX parts use the MIPS M4K core, placing them in the broader hierarchy MCU -> microcontroller -> embedded processor -> semiconductor, and they are widely deployed when 8/16-bit parts lack the throughput or memory needed for graphical user interfaces, USB stacks, or real-time control loops.
Key features of this part include 128 KB on-chip Flash organized as 128K x 8, 16 KB SRAM, an 80 MHz maximum CPU clock (40 MHz system clock for peripherals), five 16-bit timers/counters, two I2C, two SPI, two UART channels, USB 2.0 full-speed device/host/OTG, a 16-channel 10-bit ADC with 1 Msps, and a parallel master port. The industrial temperature grade (-40C to +85C) and 2.3V-3.6V single supply operation simplify integration into harsh environments.
The architecture combines a 5-stage pipelined MIPS32 core with single-cycle multiplication and hardware divide, enabling 1.56 DMIPS/MHz and excellent deterministic interrupt response. The PMD (peripheral module disable) and power-saving modes let idle peripherals draw near-zero current, which is critical for USB bus-powered and battery-backed designs.
Typical applications include USB human-interface devices, industrial control and HMI panels, embedded web servers, data loggers, sensor hubs, and low-cost graphics terminals. The 80 MHz performance, USB, and 128 KB Flash cover most mid-range connected-embedded workloads.
When designing with this MCU, budget for a 2.3V-3.6V LDO and follow Microchip's recommended decoupling network (100 nF + 10 uF bulk). Always program the device through the ICSP interface using MPLAB X IDE + XC32 compiler; never assume 80 MHz operation without proper PLL configuration.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes beyond what is in the manufacturer datasheet alone.
Alternatif penggantian untuk PIC32MX320F128HT-80I/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC32MX320F128HT-80I/PT (sama faktor bentuk dan footprint) — berbeda di dalam ADC, Core Architecture, I/O Pins, Maximum CPU Frequency, Package.
PIC32MX320F128H-80I/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MX340F128HT-80I/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MX320F128HT-40I/PT
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC32MX270F256D-I/PT
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC32MX230F256D-50I/PT
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC32MX150F128D-I/PT
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC32MX170F256B-I/ML
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC32MX320F128HT-80I/PT Rating Maksimal & Karakteristik Listrik
| Core | MIPS32 M4K |
| Core Architecture | 32-bit RISC, 5-stage pipeline |
| Maximum CPU Frequency | 80 MHz |
| System Clock | 40 MHz (peripheral bus) |
| Program Memory (Flash) | 128 KB (128K x 8) |
| Data Memory (SRAM) | 16 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| I/O Pins | 53 |
| ADC | 10-bit, 16-channel, 1 Msps |
| USB | USB 2.0 Full-Speed Device/Host/OTG |
| UART | 2 |
| SPI | 2 |
| I2C | 2 |
| Timers | 5 x 16-bit |
| Paket | 64-pin TQFP (PT), 10x10 mm |
| Tipe Mounting | Surface Mount |
| Suhu Kerja | -40C to +85C (Industrial, -I suffix) |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Konfigurasi Pin PIC32MX320F128HT-80I/PT
| Pin produk 1 | RP15/PMA0/PMD15/AN15/SS2/RF5 — Remappable I/O / Parallel Master Port Address bit 0 |
| Pin produk 2 | RP14/PMA1/PMD14/AN14/SCK2/RF4 — Remappable I/O / SPI2 clock |
| Pin produk 3 | RP13/PMD13/AN13/C2IN-/OCFA/RF3 — Remappable I/O / Comparator input |
| Pin produk 4 | RP12/PMD12/AN12/C2IN+/RF2 — Remappable I/O / Comparator input |
| Pin produk 5 | RP11/OC5/PMRD/RF1 — Remappable I/O / Output Compare 5 |
| Pin produk 6 | RP10/PMWR/U6TX/RF0 — Remappable I/O / PMP write strobe |
| Pin produk 7 | SDA2/RA15 — I2C2 data / GPIO |
| Pin produk 8 | SCL2/RA14 — I2C2 clock / GPIO |
| Pin produk 9 | RA9/TDI — JTAG TDI / GPIO |
| Pin produk 10 | RA10/TCK — JTAG TCK / GPIO |
| Pin produk 11 | RA1/PGEC1 — ICSP clock / GPIO |
| Pin produk 12 | RA0/PGED1 — ICSP data / GPIO |
| Pin produk 13 | RA4/SOSCO — Secondary oscillator / GPIO |
| Pin produk 14 | RA5/SOSCI — Secondary oscillator / GPIO |
| Pin produk 15 | VDD — Positive supply (3.3V) |
| Pin produk 16 | RG15 — GPIO / PMP address |
| Pin produk 17 | RG13 — GPIO / PMP address |
| Pin produk 18 | RG12 — GPIO / PMP address |
| Pin produk 19 | RG14 — GPIO / PMP address |
| Pin produk 20 | VSS — Ground |
| Pin produk 21 | RG0/DEVCFG0 — GPIO / PMP data |
| Pin produk 22 | RG1 — GPIO / PMP data |
| Pin produk 23 | RG2 — GPIO / PMP data |
| Pin produk 24 | RG3 — GPIO / PMP data |
| Pin produk 25 | RE0/PMD0 — GPIO / PMP data |
| Pin produk 26 | RE1/PMD1 — GPIO / PMP data |
| Pin produk 27 | RE2/PMD2 — GPIO / PMP data |
| Pin produk 28 | RE3/PMD3 — GPIO / PMP data |
| Pin produk 29 | RE4/PMD4 — GPIO / PMP data |
| Pin produk 30 | RE5/PMD5 — GPIO / PMP data |
| Pin produk 31 | RE6/PMD6 — GPIO / PMP data |
| Pin produk 32 | RE7/PMD7 — GPIO / PMP data |
| Pin produk 33 | VDD — Positive supply (3.3V) |
| Pin produk 34 | RB0/PGED2/AN0 — ICSP data / ADC ch0 |
| Pin produk 35 | RB1/PGEC2/AN1 — ICSP clock / ADC ch1 |
| Pin produk 36 | RB2/AN2 — GPIO / ADC ch2 |
| Pin produk 37 | RB3/AN3 — GPIO / ADC ch3 |
| Pin produk 38 | RB4/AN4 — GPIO / ADC ch4 |
| Pin produk 39 | RB5/AN5 — GPIO / ADC ch5 |
| Pin produk 40 | RB6/AN6/OC1 — GPIO / ADC ch6 / OC1 |
| Pin produk 41 | RB7/AN7/OC2 — GPIO / ADC ch7 / OC2 |
| Pin produk 42 | VSS — Ground |
| Pin produk 43 | RB8/AN8/C1OUT — GPIO / ADC ch8 / Comparator out |
| Pin produk 44 | RB9/AN9/C2OUT — GPIO / ADC ch9 / Comparator out |
| Pin produk 45 | RB10/AN10 — GPIO / ADC ch10 |
| Pin produk 46 | RB11/AN11 — GPIO / ADC ch11 |
| Pin produk 47 | RC1/AN12 — GPIO / ADC ch12 |
| Pin produk 48 | RC2/AN13 — GPIO / ADC ch13 |
| Pin produk 49 | RC3/AN14 — GPIO / ADC ch14 |
| Pin produk 50 | RC4/AN15 — GPIO / ADC ch15 |
| Pin produk 51 | VDD — Positive supply (3.3V) |
| Pin produk 52 | OSC1/CLKI/RC12 — Crystal input / external clock |
| Pin produk 53 | OSC2/CLKO/RC15 — Crystal output / system clock out |
| Pin produk 54 | VSS — Ground |
| Pin produk 55 | RC13/CVREF — GPIO / comparator reference |
| Pin produk 56 | RC14 — GPIO |
| Pin produk 57 | RA6/TMS — JTAG TMS / GPIO |
| Pin produk 58 | RA7/TDO — JTAG TDO / GPIO |
| Pin produk 59 | RD0/SDO1 — SPI1 data out / GPIO |
| Pin produk 60 | RD1/SDI1 — SPI1 data in / GPIO |
| Pin produk 61 | RD2/SCK1 — SPI1 clock / GPIO |
| Pin produk 62 | RD3/SS1 — SPI1 slave select / GPIO |
| Pin produk 63 | RD4/SDO2/U1TX — SPI2/UART1 TX / GPIO |
| Pin produk 64 | RD5/SDI2/U1RX — SPI2/UART1 RX / GPIO |
Aplikasi Umum
PIC32MX320F128HT-80I/PT cocok untuk 6 aplikasis: USB Human-Interface Devices (HID), Industrial Control and HMI Panels, Embedded Web Servers and TCP/IP Connectivity, Data Acquisition and Sensor Hubs, Low-Cost Graphics and LCD Terminals, Consumer Electronics and Home Appliance Controllers.
USB Human-Interface Devices (HID)
The PIC32MX320F128HT-80I/PT is well suited for USB HID peripherals such as custom keyboards, mice, game controllers, and industrial input panels. Its integrated USB 2.0 full-speed controller (device, host, OTG) eliminates the need for an external PHY, and the 80 MHz MIPS M4K core processes HID reports with deterministic interrupt latency. The 128 KB Flash holds the USB stack plus a 2 KB bootloader, while 16 KB SRAM comfortably buffers HID reports. Placed on a 4-layer board with 0.1uF + 4.7uF decoupling near the VDD pins, it delivers full-speed USB throughput with low EMI.
Direkomendasikan
Industrial Control and HMI Panels
The 53 GPIO pins of the PIC32MX320F128HT-80I/PT directly drive 7-segment displays, keypads, and relay outputs in industrial HMI front panels. The 16-channel 10-bit ADC samples 4-20 mA loop sensors at 1 Msps, and the 5 x 16-bit timers generate precise PWM outputs for motor or valve control. The industrial -40C to +85C temperature grade supports factory-floor operation. The 80 MHz core plus DMA offload keeps the UI responsive while running control loops, and the 16 KB SRAM holds a 128-segment LCD buffer plus Modbus RTU frame.
Direkomendasikan
Embedded Web Servers and TCP/IP Connectivity
The PIC32MX320F128HT-80I/PT is widely used in low-cost connected devices running Microchip's TCP/IP stack (or lwIP) for embedded web servers and MQTT clients. The 128 KB Flash accommodates the TCP/IP stack, an HTTP server, and application logic, while 16 KB SRAM serves socket buffers. The 80 MHz core and DMA deliver the throughput needed for several concurrent sockets at moderate data rates. With an external ENC28J60 or ENC424J600 Ethernet controller, it becomes a full-featured web server in industrial or building-automation applications.
Direkomendasikan
Data Acquisition and Sensor Hubs
The 16-channel 10-bit 1 Msps ADC of the PIC32MX320F128HT-80I/PT enables multi-sensor data acquisition at 100 kHz aggregate sample rates, suitable for vibration, temperature, and process-monitoring applications. The 53 I/O pins interface with SPI sensors, I2C peripherals, and parallel ADCs, while the 16 KB RAM holds time-stamped sample buffers for SD-card logging. The device's DMA engine moves ADC data to RAM without CPU intervention, leaving 80% of the core free for filtering, FFT, or compression before writing to removable storage.
Direkomendasikan
Low-Cost Graphics and LCD Terminals
The PIC32MX320F128HT-80I/PT drives small TFT or OLED graphical displays (up to 320x240 QVGA) with the PMP (Parallel Master Port) peripheral in 8-bit mode. The 80 MHz MIPS M4K core can update full-screen buffers at 30 fps, while the 16 KB SRAM holds a 320x240x1bpp monochrome framebuffer or a smaller RGB565 tile. Designers often pair it with the SSD1963 or ILI9341 controller, sending frame data via PMP and reading touch input over SPI. The 53 I/O frees pins for backlight PWM and touch interrupt.
Direkomendasikan
Consumer Electronics and Home Appliance Controllers
The PIC32MX320F128HT-80I/PT is used in consumer appliances such as coffee machines, washing-machine front panels, and air-conditioner controllers. The 80 MHz core handles user-interface logic, sensor fusion, and motor-control loops; USB enables firmware update and diagnostics. The integrated 16-bit timers generate precise PWM for TRIAC or IGBT drivers, and the 53 I/O connect keypads, LED rings, and rotary encoders. With a 3.3V LDO and ESD-protected USB, the design meets consumer safety and reliability expectations.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC32MX320F128HT-80I/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC32MX320F128H-80I/PT | PIC32MX340F128HT-80I/PT | PIC32MX270F256D-I/PT | PIC32MX230F256D-50I/PT | PIC32MX150F128D-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (PT), 10x10 mm | 64-TQFP (PT) - same | 64-TQFP (PT) - same | 64-TQFP (PT) - same | 64-TQFP (PT) - same | 64-TQFP (PT) - same |
| Maximum CPU Frequency | 80 MHz | 80 MHz | 80 MHz | 50 MHz | 50 MHz | 40 MHz |
| Flash | 128 KB | 128 KB | 128 KB | 256 KB | 256 KB | 128 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 64 KB | 16 KB | 32 KB |
| USB | USB 2.0 Full-Speed | USB 2.0 Full-Speed | USB 2.0 Full-Speed + CAN | USB 2.0 Full-Speed | USB 2.0 Full-Speed | USB 2.0 Full-Speed |
| I/O Pins | 53 | 53 | 53 | 53 | 53 | 53 |
| ADC | 10-bit, 16-ch, 1 Msps | 10-bit, 16-ch, 1 Msps | 10-bit, 16-ch, 1 Msps | 10-bit, 28-ch, 1 Msps | 10-bit, 28-ch, 1 Msps | 10-bit, 28-ch, 1 Msps |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Diferensiator Kunci
- 100% register/firmware compatible with PIC32MX320F128H-80I/PT (vsPIC32MX320F128H-80I/PT)
- Highest CPU clock in the 64-TQFP 128 KB Flash class (vsPIC32MX270F256D-I/PT (50 MHz, 256 KB Flash))
- Mature, widely-supported silicon with full Microchip toolchain (vsGeneric 32-bit MCU alternatives from non-Microchip vendors)
Catatan Desain
The PIC32MX320F128HT-80I/PT operates from 2.3V to 3.6V and has multiple VDD/VSS pins (15, 20, 33, 42, 51, 54). Place a 100 nF 0.1uF X7R decoupling capacitor within 3 mm of every VDD/VSS pair, plus a single 4.7uF to 10uF bulk capacitor near the IC. The internal 1.8V regulator powers the core; no external core supply is needed. USB bus-powered designs must enforce <100 mA average inrush to comply with USB 2.0 specs.
Do not assume 80 MHz operation out of reset: the device boots on the FRC (internal 8 MHz) oscillator. To reach 80 MHz you must configure the PLL with the correct divider/multiplier and switch the system clock source. Failing to set the SYSKEY register leaves configuration registers locked. The ICSP pins PGEC1/PGED1 (RA1/RA0) must remain accessible for in-circuit programming - do not repurpose them as outputs in production boards without a debug header.
The 64-pin TQFP (10x10 mm) has 0.5 mm pitch, so use 0.25 mm via-in-pad or 0.2 mm traces with 0.2 mm clearances for the inner pins. Place the 8 MHz primary crystal within 5 mm of OSC1/OSC2 with traces symmetrically matched. Route the USB D+/D- differential pair with 90-ohm differential impedance and keep them short and isolated. Connect all 4 VSS pins and all 3 VDD pins with low-impedance pours to avoid ground bounce during USB enumeration.
Informasi Konformitas
RoHS and lead-free per Microchip product page. Industrial temperature grade (-40C to +85C) but not AEC-Q100 qualified for automotive. For automotive, consider PIC32MX variants with -V or automotive suffixes, or migrate to dsPIC33/PIC32MK families.
