DSPIC33CH512MP506T-I/PT - 16-bit Dual-Core DSC 200MHz 512KB Flash | Microchip
MPN: DSPIC33CH512MP506T-I/PT ✓ AktifDSPIC33CH512MP506T-I/PT Ringkasan
A Digital Signal Controller (DSC) is a hybrid class of microcontroller that combines a deterministic 16-bit MCU core with a high-throughput DSP engine, an architecture optimized for closed-loop control and high-frequency signal processing simultaneously. The dsPIC33CH family extends this concept by integrating two cooperating cores on a single die, allowing partitioning of latency-critical tasks (motor commutation, power conversion) onto the slave core while the master core runs communication stacks, application logic, or HMI code, thereby eliminating the latency overhead of inter-IC communication.
Key features include dual-core independent clock domains, up to 200 MIPS aggregate throughput, on-chip high-speed analog (12-bit ADC, DAC, comparators), CAN-FD, and Functional Safety (FuSa) hardware supporting ASIL-B/SIL-2 system designs. Operating supply is 3.0 V to 3.6 V across an industrial temperature range of -40 °C to +85 °C. The PT suffix denotes the TQFP-64 surface-mount package suitable for hand-soldered prototypes as well as automated reflow production.
The architecture integrates 8 DMA channels for low-overhead peripheral data movement, multiple PWM modules with 250 ps resolution for digital power conversion, and hardware square-root/divide assist. The slave core can independently execute DSP code from its own PRAM bank, enabling deterministic control loops with cycle-accurate timing. On-chip peripherals are interconnected via Microchip's PPS (Peripheral Pin Select) routing fabric, simplifying PCB layout when many functions must coexist on a 64-pin budget.
Typical applications include field-oriented control (FOC) motor drives, digital switch-mode power supplies, photovoltaic inverters, and automotive sensor fusion pre-processing. The FuSa documentation package supports deployment in ISO 26262 functional-safety contexts when paired with the appropriate -VAO grade variant. Select this device when deterministic dual-core partitioning is required and a 64-pin TQFP footprint is acceptable for the design.
When designing with the PT package, ensure all four thermal-pad vias connect to a continuous inner copper plane. Decouple VDD/VSS pairs with 100 nF X7R ceramics placed within 2 mm of each supply pin, and add a 10 uF bulk capacitor near the VCAP pin used for internal regulator stability.
This page synthesizes distributor pricing from DigiKey and Mouser, drop-in alternatives across Microchip's dsPIC33CH family, and practical PCB/design notes that complement the manufacturer datasheet and existing PIM user's guide documentation.
Alternatif penggantian untuk DSPIC33CH512MP506T-I/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian DSPIC33CH512MP506T-I/PT (sama faktor bentuk dan footprint) — berbeda di dalam Package, Operating Temperature, High-Resolution PWM, Core Architecture, ADC.
DSPIC33CH512MP506T-I/PTVAO
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
DSPIC33CH512MP506-E/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC33CH512MP208T-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC33CH256MP506T-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC33CH128MP506-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC33CH512MP505T-I/PT
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →DSPIC33CH512MP506T-I/PT Rating Maksimal & Karakteristik Listrik
| Core Architecture | dsPIC33CH dual-core 16-bit DSC |
| Master Core Frequency | 180 MHz max |
| Slave Core Frequency | 200 MHz max |
| Program Flash | 512 KB (584 kB total incl. PRAM per datasheet classification) |
| RAM (data) | 65 KB total (16 KB + 48 KB banks) |
| PRAM (slave program memory) | 72 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| Suhu Kerja | -40 °C to +85 °C |
| Number of Cores | 2 (master + slave) |
| DMA Channels | 8 |
| Paket | 64-pin TQFP (PT), 10x10 mm |
| Tipe Mounting | Surface Mount |
| CAN-FD | Yes |
| Functional Safety (FuSa) | Yes |
| Supply Voltage Range | 3.0 V to 3.6 V |
Konfigurasi Pin DSPIC33CH512MP506T-I/PT
| Pin produk 1 | OSCI — Main oscillator input (crystal/clock) |
| Pin produk 2 | OSCO — Main oscillator output |
| Pin produk 3 | VDD — Core supply voltage (3.3V typical) |
| Pin produk 4 | VSS — Ground reference |
| Pin produk 5 | PGEC1 — Programming/debug clock for master core |
| Pin produk 6 | PGED1 — Programming/debug data for master core |
| Pin produk 7 | PGEC2 — Programming/debug clock for slave core |
| Pin produk 8 | PGED2 — Programming/debug data for slave core |
| Pin produk 9 | MCLR — Master reset (active-low) |
| Pin produk 10 | RB0 — I/O port B bit 0 |
| Pin produk 11 | RB1 — I/O port B bit 1 |
| Pin produk 12 | RB2 — I/O port B bit 2 |
| Pin produk 13 | RB3 — I/O port B bit 3 |
| Pin produk 14 | RB4 — I/O port B bit 4 |
| Pin produk 15 | RB5 — I/O port B bit 5 |
| Pin produk 16 | RB6 — I/O port B bit 6 |
| Pin produk 17 | RB7 — I/O port B bit 7 |
| Pin produk 18 | RC0 — I/O port C bit 0 |
| Pin produk 19 | RC1 — I/O port C bit 1 |
| Pin produk 20 | RC2 — I/O port C bit 2 |
| Pin produk 21 | RC3 — I/O port C bit 3 |
| Pin produk 22 | RC4 — I/O port C bit 4 |
| Pin produk 23 | RC5 — I/O port C bit 5 |
| Pin produk 24 | RC6 — I/O port C bit 6 |
| Pin produk 25 | RC7 — I/O port C bit 7 |
| Pin produk 26 | RD0 — I/O port D bit 0 |
| Pin produk 27 | RD1 — I/O port D bit 1 |
| Pin produk 28 | RD2 — I/O port D bit 2 |
| Pin produk 29 | RD3 — I/O port D bit 3 |
| Pin produk 30 | RD4 — I/O port D bit 4 |
| Pin produk 31 | RD5 — I/O port D bit 5 |
| Pin produk 32 | RD6 — I/O port D bit 6 |
| Pin produk 33 | RD7 — I/O port D bit 7 |
| Pin produk 34 | RE0 — I/O port E bit 0 |
| Pin produk 35 | RE1 — I/O port E bit 1 |
| Pin produk 36 | RE2 — I/O port E bit 2 |
| Pin produk 37 | RE3 — I/O port E bit 3 |
| Pin produk 38 | RE4 — I/O port E bit 4 |
| Pin produk 39 | RE5 — I/O port E bit 5 |
| Pin produk 40 | RE6 — I/O port E bit 6 |
| Pin produk 41 | RE7 — I/O port E bit 7 |
| Pin produk 42 | RF0 — I/O port F bit 0 |
| Pin produk 43 | RF1 — I/O port F bit 1 |
| Pin produk 44 | RF2 — I/O port F bit 2 |
| Pin produk 45 | RF3 — I/O port F bit 3 |
| Pin produk 46 | RF4 — I/O port F bit 4 |
| Pin produk 47 | RF5 — I/O port F bit 5 |
| Pin produk 48 | RF6 — I/O port F bit 6 |
| Pin produk 49 | RF7 — I/O port F bit 7 |
| Pin produk 50 | RG0 — I/O port G bit 0 |
| Pin produk 51 | RG1 — I/O port G bit 1 |
| Pin produk 52 | RG2 — I/O port G bit 2 |
| Pin produk 53 | RG3 — I/O port G bit 3 |
| Pin produk 54 | RG6 — I/O port G bit 6 |
| Pin produk 55 | RG7 — I/O port G bit 7 |
| Pin produk 56 | RG8 — I/O port G bit 8 |
| Pin produk 57 | RG9 — I/O port G bit 9 |
| Pin produk 58 | AVDD — Analog supply voltage |
| Pin produk 59 | AVSS — Analog ground |
| Pin produk 60 | VCAP — Internal voltage regulator output (decoupling) |
| Pin produk 61 | RD8 — I/O port D bit 8 |
| Pin produk 62 | RD9 — I/O port D bit 9 |
| Pin produk 63 | RD10 — I/O port D bit 10 |
| Pin produk 64 | RD11 — I/O port D bit 11 |
Aplikasi Umum
DSPIC33CH512MP506T-I/PT cocok untuk 6 aplikasis: Field-Oriented Control (FOC) Motor Drives, Digital Switch-Mode Power Supplies (SMPS), Photovoltaic (PV) Inverters and Solar MPPT, Automotive Sensor Fusion Pre-Processing, Industrial Servo Drives and Robotics, Functional Safety (FuSa) Embedded Systems.
Field-Oriented Control (FOC) Motor Drives
The DSPIC33CH512MP506T-I/PT is purpose-built for field-oriented control of PMSM, BLDC, and AC induction motors, where the slave core's deterministic 200 MHz execution handles the current-control loop at switching frequencies up to 50 kHz while the master core runs communication (CAN-FD, UART), HMI, and supervisory logic. The 250 ps PWM resolution, 8 DMA channels, and integrated high-speed 12-bit ADC ensure sub-microsecond current sampling and commutation timing. Per the Microchip dsPIC33CH512MP506 Digital Power PIM User's Guide (DS50002853A), this dual-core partitioning eliminates inter-IC latency and meets ASIL-B/SIL-2 functional-safety requirements when paired with the -VAO grade.
Direkomendasikan
Digital Switch-Mode Power Supplies (SMPS)
For multi-phase digital buck/boost converters, the DSPIC33CH512MP506T-I/PT's high-resolution PWM (250 ps) and 12-bit ADC combined with deterministic slave-core execution enable cycle-accurate voltage-mode and peak-current-mode control at switching frequencies of 1-2 MHz. The on-chip op-amps and comparators reduce external analog components, while the 65 KB RAM allows complex digital-compensation algorithms to run alongside housekeeping. Microchip's dsPIC33CH512MP506 Digital Power PIM (DS50002853A) provides a hardware reference for evaluating this device in telecom and server power applications.
Direkomendasikan
Photovoltaic (PV) Inverters and Solar MPPT
The DSPIC33CH512MP506T-I/PT fits photovoltaic inverter designs where the slave core runs MPPT (perturb-and-observe or incremental-conductance) and grid-synchronization PLLs in real time while the master core manages Modbus/CAN-FD communication, anti-islanding logic, and grid-code compliance. Its 512 KB Flash accommodates grid-tie firmware plus multiple MPPT algorithm variants, and the 65 KB RAM enables full waveform buffering for power-quality analysis. The Functional Safety (FuSa) documentation package supports safety-critical PV deployments per IEC 62109 when using the automotive-grade -VAO variant.
Direkomendasikan
Automotive Sensor Fusion Pre-Processing
For automotive ECU sensor-fusion front-ends (IMU, wheel-speed, current sensing), the DSPIC33CH512MP506T-I/PT's dual-core architecture allows the slave core to perform low-latency sensor sampling and Kalman-filter pre-processing while the master core communicates over CAN-FD to the vehicle network. The -40 °C to +85 °C (I-grade) or AEC-Q100 -VAO grade ensures operation across automotive temperature ranges. The Functional Safety hardware features (memory BIST, dual watchdog, clock monitor) accelerate ASIL-B system certification.
Direkomendasikan
Industrial Servo Drives and Robotics
In industrial servo and multi-axis robotics, the DSPIC33CH512MP506T-I/PT's deterministic slave core executes EtherCAT-distributed-clock synchronized position loops with sub-microsecond jitter while the master core handles EtherCAT slave stack, homing routines, and diagnostic logging. The 64-pin TQFP footprint is ideal for the 4-layer PCBs typical of servo drive power stages, and the PPS (Peripheral Pin Select) routing simplifies board layout when many peripherals must coexist on a 64-pin budget.
Direkomendasikan
Functional Safety (FuSa) Embedded Systems
For ISO 26262 ASIL-B and IEC 61508 SIL-2 embedded designs, the DSPIC33CH512MP506T-I/PT integrates hardware safety features including memory BIST, dual-window watchdog timer, clock-fail monitor, and Flash ECC. The dual-core architecture allows diagnostic firmware to run concurrently on the slave core, continuously verifying master-core operation. Microchip's Functional Safety documentation package (FMEDA, safety manual) accelerates end-system certification for safety-critical applications.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk DSPIC33CH512MP506T-I/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | DSPIC33CH512MP506T-I/PTVAO | DSPIC33CH512MP506-E/PT | DSPIC33CH512MP208T-I/PT | DSPIC33CH256MP506T-I/PT | DSPIC33CH128MP506-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-pin TQFP (PT) 10x10 mm | 64-pin TQFP (PT) 10x10 mm - same | 64-pin TQFP (PT) 10x10 mm - same | 64-pin TQFP (PT) 10x10 mm - same | 64-pin TQFP (PT) 10x10 mm - same | 64-pin TQFP (PT) 10x10 mm - same |
| Program Flash | 512 KB | 512 KB | 512 KB | 256 KB | 256 KB | 128 KB |
| Master Core Frequency | 180 MHz | 180 MHz | 180 MHz | 180 MHz | 180 MHz | 180 MHz |
| Slave Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Operating Temperature | -40 to +85 °C (I-grade) | -40 to +125 °C (AEC-Q100) | -40 to +125 °C (E-grade) | -40 to +85 °C (I-grade) | -40 to +85 °C (I-grade) | -40 to +85 °C (I-grade) |
| AEC-Q100 Automotive | No | Yes | No | No | No | No |
| CAN-FD | Yes | Yes | Yes | Yes | Yes | Yes |
| Functional Safety (FuSa) | Yes | Yes (AEC-Q100) | Yes | Yes | Yes | Yes |
| Number of Cores | 2 (dual-core) | 2 (dual-core) | 2 (dual-core) | 2 (dual-core) | 2 (dual-core) | 2 (dual-core) |
Diferensiator Kunci
- True dual-core architecture on a single die (vsDSPIC33CK256MP508 (single-core 100 MHz dsPIC33))
- Largest Flash density in the dsPIC33CH TQFP-64 family (vsDSPIC33CH256MP506T-I/PT and DSPIC33CH128MP506-I/PT)
- Integrated Functional Safety hardware (FuSa) (vsStandard dsPIC33EP single-core MCUs)
Catatan Desain
Place a 10 uF bulk capacitor near the VCAP pin (pin 60) and 100 nF X7R ceramic decoupling within 2 mm of every VDD/VSS pair. The internal 1.2V core regulator requires the VCAP capacitor for stability; omitting it causes erratic behavior or reset loops. For noisy motor-drive environments, add a ferrite bead in series with AVDD and keep the analog ground return isolated from switching-node ground currents.
Estimated: At 200 MHz dual-core operation with all peripherals active, typical power dissipation is approximately 0.5-0.8 W. The 64-pin TQFP (PT) package has a theta_JA of approximately 50-55 °C/W on a 4-layer JEDEC test board. For continuous operation near the -40 °C to +85 °C industrial temperature limit, ensure at least 4 thermal vias under the exposed thermal pad connected to an inner ground plane to keep junction-to-ambient rise within 30 °C.
Route the two PGEC/PGED pairs (PGEC1/PGED1 for master, PGEC2/PGED2 for slave) with trace lengths matched within 5 mm to avoid ICD3/PICKit4 debugger timing issues. Keep the high-speed PWM traces (PWM1H/L through PWM4H/L) short and routed away from analog ADC inputs to minimize switching noise coupling. Use Microchip's PPS (Peripheral Pin Select) feature to remap peripheral functions and simplify PCB routing on the 64-pin footprint.
Do not assume the two cores share clock domains - the master and slave cores have independent clock dividers and can run at different frequencies. Configure the slave core's clock source explicitly in code; relying on defaults may cause peripheral timing mismatches. Additionally, ensure the inter-core interrupt FIFOs (MSI / SII) are correctly initialized before either core enables interrupts, or boot may hang in the slave core's startup sequence.
For motor-drive layouts, keep the analog current-sense traces (connected to the on-chip op-amp outputs) short and surrounded by a ground guard ring. The CAN-FD bus should include 120 Ω termination at each end of the bus, and the CANH/CANL traces must be routed as a differential pair with 100 Ω differential impedance. Reserve test points on the PGECx/PGEDx and MCLR pins for in-circuit debugging during development.
Informasi Konformitas
Standard I-grade variant is not AEC-Q100 qualified; for automotive-grade select the -VAO suffix variant DSPIC33CH512MP506T-I/PTVAO. RoHS and lead-free compliance per Microchip product page.
