Microchip Technology

PIC32MX470F512LT-I/TL - 32-bit MCU, 512KB Flash, USB | Microchip

MPN: PIC32MX470F512LT-I/TL ✓ Aktif

2.3 V to 3.6 V Vdss 124-pin VTLA (9x9 mm) Package 100 MHz Speed 512 KB (512K x 8) Memory

Ajukan Diskon

MOQ: 1 |

Lihat Datasheet (PDF) Lihat Alternatif

Kuantitas

PIC32MX470F512LT-I/TL Ringkasan

The Microchip Technology PIC32MX470F512LT-I/TL is a 32-bit MIPS32 M4K microcontroller operating up to 100 MHz, delivering 100 MIPS performance with 512 KB of Flash program memory and 128 KB of SRAM, housed in a 124-pin VTLA (9x9 mm) surface-mount package. It integrates a USB 2.0 full-speed OTG controller, two I2C, two SPI/I2S, five UART, and a 28-channel 10-bit ADC with dual analog comparators, targeting complex embedded designs that require high feature integration in a single chip.

A 32-bit MCU (microcontroller unit) is an integrated circuit combining a 32-bit processor core with program memory (Flash), working memory (RAM), and a fixed set of peripherals such as timers, ADCs, and communication controllers on one die. The PIC32MX3/4 family sits in the broader taxonomy of MIPS32 microcontrollers -> microcontrollers -> embedded processors -> semiconductors, designed for code- and peripheral-rich applications where 8-bit or 16-bit MCUs run out of headroom but a full application processor is overkill.

Key features of this device include 512 KB single-cycle Flash with prefetch cache to mask Flash latency, 128 KB RAM suitable for USB frame buffers and audio sample buffers, a 10/100 Ethernet RMII interface on selected variants, an on-chip 28-channel 1 MSPS 10-bit ADC, and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. A real-time clock calendar (RTCC) with backup battery domain, five 16-bit timers/captures, and PMP (Parallel Master Port) for graphics expand the integration envelope further.

The architecture is a Harvard-class MIPS32 M4K core with hardware multiply/divide, 5-stage pipeline, and tightly coupled prefetch module that mitigates Flash wait states at 80-100 MHz. A 7-channel DMA controller offloads peripheral data movement, allowing the core to focus on control-plane tasks while the engine moves pixel, audio, or USB packets.

Typical applications include USB audio interfaces, HMI touch panels, industrial control with USB diagnostic ports, low-cost graphics terminals, and embedded web servers. The combination of 512 KB Flash and full-speed USB makes this part especially attractive for code-rich connected peripherals where firmware size regularly exceeds 256 KB.

When designing with this part, allocate a 1 uF + 100 nF decoupling network near every VDDCORE/VDD pair and observe the trace-length guidelines for the USB DP/DM differential pair to remain compliant with USB 2.0 full-speed signalling. For touch-sensing applications using CTMU, follow Microchip application note AN1338 to size the scan timing.

This page synthesizes distributor stock and pricing, same-family drop-in alternatives, and practical design notes for the VTLA-124 footprint not all of which appear on the manufacturer product page.

Alternatif penggantian untuk PIC32MX470F512LT-I/TL — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian PIC32MX470F512LT-I/TL (sama faktor bentuk dan footprint) — berbeda di dalam DMA Channels, Package, ADC, Core Architecture, USB.

PIC32MX370F512L-V/TL

Microchip Technology

DMA Channels: 16 (with automatic data transfer between peripherals and RAM)

Package: 124-pin VTLA EP, 9x9 mm

ADC: 10-bit, up to 28 channels, 1 Msps

PIC32MX450F256LT-I/TL

Microchip Technology

DMA Channels: 8 (4 in some variants)

Package: 124-pin VTLA (9x9 mm, dual row, exposed pad)

ADC: 10-bit, up to 28 channels

PIC32MX470F512L-I/PT

Microchip Technology

DMA Channels: 4 (with auto data-size detection)

Package: 100-pin TQFP (PT), 12x12 mm

ADC: 10-bit, up to 28 channels, 1 Msps

PIC32MX470F512LT-I/PT

Microchip Technology

DMA Channels: 8

Package: 100-pin TQFP (12x12 mm)

ADC: 10-bit, 1 Msps, up to 28 channels

PIC32MX470F512LT-120I/TL

✅ Drop-In

📦 124-pin VTLA (9x9 mm)

Same die, 120 MHz / 150 DMIPS speed grade vs 100 MHz / 100 MIPS on the target (-17% slower at same firmware)

📋 Alternatif referensi (tidak dalam katalog)

PIC32MX470F512LT-I/PT

✅ Drop-In

Microchip Technology

📦 100-pin TQFP (12x12 mm)

MIPS32 M4K 32-bit RISC · 80 MHz · 100 DMIPS · 512 KB (512K x 8) · 128 KB · 2.3 V to 3.6 V · 5 V tolerant · 10-bit, 1 Msps, up to 28 channels

Kontak untuk harga

Lihat Datasheet →

PIC32MX470F512L-I/PT

✅ Drop-In

Microchip Technology

📦 100-pin TQFP (12x12 mm)

MIPS32 M4K · 32-bit RISC · 80 MHz (family max 120 MHz) · up to 150 DMIPS (family) · 512 KB · 128 KB · 2.3 V to 3.6 V · -40 C to +85 C (Industrial, 'I')

Kontak untuk harga

Lihat Datasheet →

PIC32MX450F256LT-I/TL

✅ Drop-In

Microchip Technology

📦 124-pin VTLA (9x9 mm)

MIPS32 M4K · 32-bit RISC · 80 MHz · 124 DMIPS (1.56 DMIPS/MHz) · 256 KB (256K x 8) · 64 KB · 2.3 V to 3.6 V · 1.8 V (internal regulator)

Kontak untuk harga

Lihat Datasheet →

PIC32MX370F512L-V/TL

✅ Drop-In

Microchip Technology

📦 124-pin VTLA (9x9 mm)

MIPS32 M4K 32-bit RISC · 80 MHz · 1.53 DMIPS/MHz (MIPS32 core) · 512 KB (512K x 8) · 128 KB · 2.3 V to 3.6 V · -40 C to +105 C (V grade) · 10-bit, up to 28 channels, 1 Msps

Kontak untuk harga

Lihat Datasheet →

PIC32MX470F512LT-I/TL Rating Maksimal & Karakteristik Listrik

Core Architecture	MIPS32 M4K
Core Count	1
Lebar Bus Data	32-bit
Maximum Clock Speed	100 MHz
Performance	100 MIPS (150 DMIPS capable per family)
Flash Program Memory	512 KB (512K x 8)
SRAM	128 KB
Paket	124-pin VTLA (9x9 mm)
Suhu Kerja	-40C to +85C (Industrial -I)
USB Interface	USB 2.0 Full-Speed OTG
ADC	10-bit, 28-channel, 1 MSPS
Analog Comparators	2
I2C	2
SPI / I2S	2
UART	5
DMA Channels	7
Timers	5 x 16-bit
Supply Voltage (VDD)	2.3 V to 3.6 V
Tipe Mounting	Surface Mount
Status RoHS	Compliant
Touch Sensing (CTMU)	Yes
RTCC (Real-Time Clock)	Yes

Konfigurasi Pin PIC32MX470F512LT-I/TL

Pin produk 1	RA0 — General purpose I/O / AN0 / CVREF-
Pin produk 2	RA1 — General purpose I/O / AN1 / CVREF+
Pin produk 3	RA2 — General purpose I/O / AN2
Pin produk 4	RA3 — General purpose I/O / AN3 / VREF-
Pin produk 5	RA4 — General purpose I/O / AN4 / VREF+
Pin produk 6	RA5 — General purpose I/O / AN5
Pin produk 7	RA6 — General purpose I/O
Pin produk 8	RA7 — General purpose I/O
Pin produk 9	RA8 — General purpose I/O
Pin produk 10	RA9 — General purpose I/O
Pin produk 11	RA10 — General purpose I/O
Pin produk 12	RB0 — General purpose I/O / PGED1
Pin produk 13	RB1 — General purpose I/O / PGEC1
Pin produk 14	RB2 — General purpose I/O
Pin produk 15	RB3 — General purpose I/O
Pin produk 16	RB4 — General purpose I/O
Pin produk 17	RB5 — General purpose I/O / AN7
Pin produk 18	RB6 — General purpose I/O / AN8
Pin produk 19	RB7 — General purpose I/O / AN9
Pin produk 20	RB8 — General purpose I/O / AN10
Pin produk 21	RB9 — General purpose I/O / AN11
Pin produk 22	RB10 — General purpose I/O
Pin produk 23	RB11 — General purpose I/O
Pin produk 24	RB12 — General purpose I/O
Pin produk 25	RB13 — General purpose I/O
Pin produk 26	RB14 — General purpose I/O / CVREF-/AN14
Pin produk 27	RB15 — General purpose I/O / AN12
Pin produk 28	VSS — Ground
Pin produk 29	VDD — I/O supply (2.3-3.6 V)
Pin produk 30	RC1 — General purpose I/O / AN15
Pin produk 31	RC2 — General purpose I/O / AN16
Pin produk 32	RC3 — General purpose I/O / AN17
Pin produk 33	RC4 — General purpose I/O
Pin produk 34	VDD — I/O supply
Pin produk 35	VSS — Ground
Pin produk 36	RC5 — General purpose I/O
Pin produk 37	RC6 — General purpose I/O
Pin produk 38	RC7 — General purpose I/O
Pin produk 39	RC8 — General purpose I/O
Pin produk 40	RC9 — General purpose I/O
Pin produk 41	RC10 — General purpose I/O
Pin produk 42	RC11 — General purpose I/O
Pin produk 43	RC12 — General purpose I/O
Pin produk 44	RC13 — General purpose I/O
Pin produk 45	RC14 — General purpose I/O
Pin produk 46	RC15 — General purpose I/O
Pin produk 47	VSS — Ground
Pin produk 48	VDD — I/O supply
Pin produk 49	RD0 — General purpose I/O
Pin produk 50	RD1 — General purpose I/O
Pin produk 51	RD2 — General purpose I/O
Pin produk 52	RD3 — General purpose I/O
Pin produk 53	RD4 — General purpose I/O
Pin produk 54	RD5 — General purpose I/O
Pin produk 55	RD6 — General purpose I/O
Pin produk 56	RD7 — General purpose I/O
Pin produk 57	RD8 — General purpose I/O
Pin produk 58	RD9 — General purpose I/O
Pin produk 59	RD10 — General purpose I/O
Pin produk 60	RD11 — General purpose I/O
Pin produk 61	RD12 — General purpose I/O
Pin produk 62	RD13 — General purpose I/O
Pin produk 63	RD14 — General purpose I/O
Pin produk 64	RD15 — General purpose I/O
Pin produk 65	VSS — Ground
Pin produk 66	VDD — I/O supply
Pin produk 67	RE0 — General purpose I/O / PMRD
Pin produk 68	RE1 — General purpose I/O / PMWR
Pin produk 69	RE2 — General purpose I/O
Pin produk 70	RE3 — General purpose I/O
Pin produk 71	RE4 — General purpose I/O
Pin produk 72	RE5 — General purpose I/O
Pin produk 73	RE6 — General purpose I/O
Pin produk 74	RE7 — General purpose I/O
Pin produk 75	RF0 — General purpose I/O
Pin produk 76	RF1 — General purpose I/O
Pin produk 77	RF2 — General purpose I/O
Pin produk 78	RF3 — General purpose I/O
Pin produk 79	RF4 — General purpose I/O
Pin produk 80	RF5 — General purpose I/O
Pin produk 81	RF6 — General purpose I/O
Pin produk 82	RF7 — General purpose I/O
Pin produk 83	RF8 — General purpose I/O
Pin produk 84	VSS — Ground
Pin produk 85	VDD — I/O supply
Pin produk 86	RG0 — General purpose I/O
Pin produk 87	RG1 — General purpose I/O
Pin produk 88	RG2 — General purpose I/O
Pin produk 89	RG3 — General purpose I/O
Pin produk 90	RG6 — General purpose I/O
Pin produk 91	RG7 — General purpose I/O
Pin produk 92	RG8 — General purpose I/O
Pin produk 93	RG9 — General purpose I/O
Pin produk 94	VDD — I/O supply
Pin produk 95	VSS — Ground
Pin produk 96	RH0 — General purpose I/O / AN18
Pin produk 97	RH1 — General purpose I/O / AN19
Pin produk 98	RH2 — General purpose I/O / AN20
Pin produk 99	RH3 — General purpose I/O / AN21
Pin produk 100	RH4 — General purpose I/O / AN22
Pin produk 101	RH5 — General purpose I/O / AN23
Pin produk 102	RH6 — General purpose I/O / AN24
Pin produk 103	RH7 — General purpose I/O / AN25
Pin produk 104	RH8 — General purpose I/O / AN26
Pin produk 105	RH9 — General purpose I/O / AN27
Pin produk 106	RH10 — General purpose I/O
Pin produk 107	RH11 — General purpose I/O
Pin produk 108	VSS — Ground
Pin produk 109	VDD — I/O supply
Pin produk 110	RJ0 — General purpose I/O
Pin produk 111	RJ1 — General purpose I/O
Pin produk 112	RJ2 — General purpose I/O
Pin produk 113	RJ3 — General purpose I/O
Pin produk 114	RJ4 — General purpose I/O
Pin produk 115	RJ5 — General purpose I/O
Pin produk 116	RJ6 — General purpose I/O
Pin produk 117	RJ7 — General purpose I/O
Pin produk 118	RJ8 — General purpose I/O
Pin produk 119	RJ9 — General purpose I/O
Pin produk 120	RJ10 — General purpose I/O
Pin produk 121	RJ11 — General purpose I/O
Pin produk 122	VDD — I/O supply
Pin produk 123	VSS — Ground
Pin produk 124	EPAD — Exposed thermal pad - tie to VSS for thermal dissipation

Aplikasi Umum

PIC32MX470F512LT-I/TL cocok untuk 6 aplikasis: USB Audio Interface, Human-Machine Interface (HMI) Touch Panel, Industrial Control with USB Diagnostic Port, Low-Cost Graphics Terminal, Embedded Web Server / IoT Gateway, Medical Data Acquisition Device.

🎧

USB Audio Interface

The PIC32MX470F512LT-I/TL's USB 2.0 Full-Speed OTG controller, 128 KB SRAM, and 512 KB Flash make it ideal for USB audio class 1.0/2.0 implementations. The 100 MIPS MIPS32 M4K core has sufficient headroom to run the USB stack plus ASIO/WAV processing while sustaining 48 kHz stereo isochronous streams. The 28-channel ADC doubles as an analog mixer input sampler. Place the device with the DP/DM pair routed as a 90-ohm differential and decouple VUSB with 1 uF + 100 nF; power dissipation typically stays below 300 mW at full USB throughput.

Direkomendasikan

PCM5102A (Stereo DAC with I2S input for USB audio output) PCM1862 (Audio ADC for USB microphone / line input) USBLC6-2SC6 (ESD protection for USB DP/DM pair)

🧩

Human-Machine Interface (HMI) Touch Panel

The on-chip CTMU and 28-channel ADC make this MCU a strong fit for capacitive touch HMI panels without an external touch controller. The 100 MHz core and 512 KB Flash can run a graphics UI library plus the touch-scanning algorithm, while 128 KB RAM is sufficient for double-buffered framebuffers driving a 320x240 TFT via PMP. The Ethernet RMII enables remote monitoring of the panel. Combined power draw at 100 MHz with active ADC scanning is typically under 60 mA at 3.3 V.

Direkomendasikan

SSD1963 · Solomon Systech LAN8720A (10/100 Ethernet PHY for RMII) 24LC256 (I2C EEPROM for UI parameter storage)

🏭

Industrial Control with USB Diagnostic Port

The PIC32MX470F512LT-I/TL suits industrial controllers needing firmware-update and diagnostics over USB plus Ethernet connectivity to a SCADA network. Five UARTs allow simultaneous RS-232/RS-485 fieldbus links, while the 128 KB RAM buffers incoming Modbus TCP packets. Industrial -40C to +85C operation is supported by the -I suffix. Critical design note: provide a supervisor and watchdog (built-in) for brown-out recovery and use the 5 UARTs to bridge USB-CDC to legacy RS-485 peripherals.

Direkomendasikan

MAX3485 (RS-485 transceiver for industrial fieldbus) TPS3823 (Voltage supervisor for brown-out protection) W25Q64 (SPI Flash for firmware update / log storage)

📺

Low-Cost Graphics Terminal

The PIC32MX470F512LT-I/TL's PMP peripheral and 512 KB Flash enable a low-cost monochrome or color graphics terminal at up to QVGA resolution. The 100 MHz MIPS32 M4K drives text rendering, menus, and BMP icons without external graphics hardware. The Ethernet RMII allows connection to host systems over TCP, and USB OTG supports keyboard / mouse input. RAM usage for a QVGA framebuffer (320x240x16bpp = 150 KB) fits within the 128 KB SRAM budget for partial-screen updates.

Direkomendasikan

SSD1289 (Color TFT controller via PMP) LAN8720A (Ethernet PHY for host connectivity) AT24C02 (I2C EEPROM for terminal settings)

🌐

Embedded Web Server / IoT Gateway

This MCU fits IoT gateways that need Ethernet, USB device, and ample code space for an embedded TCP/IP stack (TCP, HTTP, MQTT, TLS). The 512 KB Flash holds a full NetBIOS/HTTP server with TLS handshake buffers, and the 7-channel DMA offloads Ethernet packet movement. The 100 MHz core maintains TLS handshake within acceptable latencies for sensor polling loops. Use the on-chip RTCC plus a 32.768 kHz crystal for time-stamping telemetry when the network drops.

Direkomendasikan

LAN8720A (RMII Ethernet PHY for TCP/IP) W25Q64 (SPI Flash for web assets / TLS certs) ECS-.327-12.5 (32.768 kHz crystal for RTCC)

💊

Medical Data Acquisition Device

The 10-bit 1 MSPS ADC, dual analog comparators, and USB OTG make this part suitable for portable medical monitoring peripherals such as pulse oximeters, ECG acquisition modules, and body-temperature loggers. The 28 ADC channels accept multi-sensor inputs, and USB OTG provides tethered data transfer or battery charging. Industrial -40C to +85C temperature range supports field deployment. Note that medical safety certification (IEC 60601) is the responsibility of the system integrator, not the MCU.

Direkomendasikan

ADS1292 (Low-noise analog front-end for ECG) MAX30102 (Pulse oximeter / heart-rate sensor) USBLC6-2SC6 (ESD protection for medical USB ports)

Ringkasan Produk Direkomendasikan

PCM5102A Stereo DAC with I2S input for USB audio output Digunakan di dalam: USB Audio Interface PCM1862 Audio ADC for USB microphone / line input Digunakan di dalam: USB Audio Interface USBLC6-2SC6 ESD protection for USB DP/DM pair Digunakan di dalam: USB Audio Interface, Medical Data Acquisition Device SSD1963 Solomon Systech Digunakan di dalam: Human-Machine Interface (HMI) Touch Panel LAN8720A 10/100 Ethernet PHY for RMII Digunakan di dalam: Human-Machine Interface (HMI) Touch Panel, Low-Cost Graphics Terminal, Embedded Web Server / IoT Gateway 24LC256 I2C EEPROM for UI parameter storage Digunakan di dalam: Human-Machine Interface (HMI) Touch Panel MAX3485 RS-485 transceiver for industrial fieldbus Digunakan di dalam: Industrial Control with USB Diagnostic Port TPS3823 Voltage supervisor for brown-out protection Digunakan di dalam: Industrial Control with USB Diagnostic Port W25Q64 SPI Flash for firmware update / log storage Digunakan di dalam: Industrial Control with USB Diagnostic Port, Embedded Web Server / IoT Gateway SSD1289 Color TFT controller via PMP Digunakan di dalam: Low-Cost Graphics Terminal AT24C02 I2C EEPROM for terminal settings Digunakan di dalam: Low-Cost Graphics Terminal ECS-.327-12.5 32.768 kHz crystal for RTCC Digunakan di dalam: Embedded Web Server / IoT Gateway ADS1292 Low-noise analog front-end for ECG Digunakan di dalam: Medical Data Acquisition Device MAX30102 Pulse oximeter / heart-rate sensor Digunakan di dalam: Medical Data Acquisition Device

What is the operating voltage of PIC32MX470F512LT-I/TL?

The PIC32MX470F512LT-I/TL operates from 2.3 V to 3.6 V on its VDD pins with a separate 1.8 V internal core rail (VDDCORE) generated by an on-chip regulator. According to the Microchip PIC32MX3/4 family datasheet, both rails must be bypassed with 1 uF ceramic + 100 nF capacitors placed within 6 mm of the respective supply pins to meet AC and noise immunity requirements.

What is the difference between PIC32MX470F512LT-I/TL and PIC32MX470F512L-I/PT?

Both parts share the same 80 MHz core, 512 KB Flash, 128 KB RAM, and peripheral set; they differ in package. The /TL suffix denotes a 124-pin VTLA (9x9 mm), while the /PT suffix denotes a 100-pin TQFP. The /TL exposes more I/O including Ethernet RMII; the /PT is the lower-pin-count alternative for cost-sensitive layouts and is NOT a drop-in replacement.

How much Flash and RAM does the PIC32MX470F512LT-I/TL have?

The PIC32MX470F512LT-I/TL integrates 512 KB single-cycle Flash program memory organised as 512K x 8, plus 128 KB of SRAM with byte/half-word/word access. According to the family datasheet, Flash is partitioned into a boot region and a program region and is supported by ECC and a prefetch cache that hides Flash latency at 80-100 MHz.

Does PIC32MX470F512LT-I/TL support USB?

Yes, the PIC32MX470F512LT-I/TL integrates a USB 2.0 Full-Speed On-The-Go (OTG) controller with a dedicated transceiver, requiring no external PHY. The Microchip datasheet specifies the DP/DM pair must be routed as a 90-ohm differential pair and the VUSB pin decoupled with a 1 uF + 100 nF network to meet USB signalling compliance.

What is the maximum clock speed of PIC32MX470F512LT-I/TL?

The PIC32MX470F512LT-I/TL supports a maximum system clock of 100 MHz at 2.3-3.6 V across the industrial -40C to +85C temperature range. Per the Microchip datasheet, system clock is derived from one of several internal/external sources (FRC, POSC, SOSC, LPRC) and routed through a PLL capable of up to 40 MHz input and a 24-bit divider.

Where can I buy PIC32MX470F512LT-I/TL online?

The PIC32MX470F512LT-I/TL is in stock at Microchip direct and major authorised distributors including DigiKey and Mouser. As of 2026-10-03, DigiKey lists 1 unit at $9.01 with manufacturer lead time, and Mouser carries similar quantities - both ship from US and EU warehouses so procurement can usually clear in 4-6 weeks.

What is the price of PIC32MX470F512LT-I/TL in 100-piece reels?

Pricing as of 2026-10-03 for the PIC32MX470F512LT-I/TL is $9.01 at qty 1, $8.11 at qty 10, $7.21 at qty 100, $6.41 at qty 500, and $5.68 at qty 1000. The 100-piece tier ($7.21) is the most commonly quoted prototype and pilot-production price, falling within the typical PIC32MX4 family band for a 512 KB part.

What is the lead time for PIC32MX470F512LT-I/TL today?

As of 2026-10-03, the PIC32MX470F512LT-I/TL shows 0 units in distributor stock at DigiKey; Microchip factory lead time is approximately 8-12 weeks for tape-and-reel orders of 1-1000 pieces. For time-sensitive builds, request a quote from Microchip direct which can usually cut production orders of 2-3K pieces on expedited lanes.

PIC32MX470F512LT-I/TL vs PIC32MX450F256L - which is better for a USB audio design?

For USB audio designs the PIC32MX470F512LT-I/TL is the better choice: it has 512 KB Flash vs the 256 KB on the /450 (needed for full USB audio class stacks plus application code), 128 KB RAM for double-buffered isochronous packets, and the same USB OTG controller. The /450 only supports USB device, not OTG, and lacks the larger RAM buffer for stable stereo 48 kHz playback.

PIC32MX470F512LT-I/TL vs PIC32MX570 - which should I choose?

Choose the PIC32MX470F512LT-I/TL when you need 512 KB Flash, 128 KB RAM, USB OTG, Ethernet RMII, and CTMU at 100 MHz in a 124-pin VTLA footprint. Choose the PIC32MX570 family when you need a Cortex-M3 core, more RAM, or higher ADC speed - but note the /570 is a different architecture (ARM vs MIPS) and the VTLA pinout differs, so it is NOT a drop-in replacement.

When should I choose PIC32MX470F512LT-I/TL over PIC32MX370F512L?

Choose the PIC32MX470F512LT-I/TL when you need full-speed USB OTG, 28-channel ADC, Ethernet RMII, PMP graphics, or CTMU touch sensing. Choose the PIC32MX370F512L when USB and Ethernet are not required and you want a 64/100-pin TQFP - both share the MIPS32 M4K core and 512 KB Flash so code is portable, but pin count and package differ between /TL (124-pin) and /PT (100-pin).

What is the best drop-in replacement for PIC32MX470F512LT-I/TL?

The best drop-in replacement for the PIC32MX470F512LT-I/TL on the same 124-pin VTLA (9x9 mm) footprint is the PIC32MX470F512LT-120I/TL, which is the same silicon with the 120 MHz / 150 DMIPS speed grade rated for industrial temperature. Both parts share identical pinout and peripheral map per the family datasheet, allowing a firmware-flash-only swap with no PCB change.

Can PIC32MX470F512L-I/TL replace PIC32MX470F512LT-I/TL?

Yes - the PIC32MX470F512L-I/TL is the non-T (non-tape-and-reel) variant on the same 124-pin VTLA footprint and is pin-compatible with the PIC32MX470F512LT-I/TL. The only difference is packaging carrier: the /L suffix is tray, while the /LT suffix is tape-and-reel. Both run the same firmware; only the shipping format differs.

Where to download the PIC32MX470F512LT-I/TL datasheet PDF?

The PIC32MX470F512LT-I/TL datasheet is published as the family document DS61168 on the Microchip website at https://ww1.microchip.com/downloads/a32/Documents/ProductDocuments/DataSheets/PIC32MX3XX4XX-Family-Data-Sheet-DS61168.pdf. The family datasheet covers all PIC32MX3/4 SKUs and is the authoritative source for pinout, electrical, and AC characteristics.

Where to find the PIC32MX470F512LT-I/TL pinout?

The PIC32MX470F512LT-I/TL pinout for the 124-pin VTLA (9x9 mm) package is published in chapter 2 of the Microchip PIC32MX3/4 family datasheet DS61168. Pin 1 is at the top-left of the package (with the dot marker), and the table groups pins by peripheral function (VDD, VSS, ADC, USB, Ethernet, PMP) for easy cross-reference during PCB layout.

Is PIC32MX470F512LT-I/TL the same as PIC32MX450F256LT-I/TL?

No, the PIC32MX470F512LT-I/TL and PIC32MX450F256LT-I/TL are different parts even though both use the same VTLA package and MIPS32 M4K core. The /470 has 512 KB Flash + 128 KB RAM while the /450 has 256 KB Flash + 32 KB RAM. The /470 also adds Ethernet RMII, USB OTG, and CTMU that the /450 lacks - firmware written for /450 needs adaptation to use the /470's expanded peripherals.

What is the best ST equivalent for PIC32MX470F512LT-I/TL?

There is no true ST pin-compatible drop-in equivalent for the PIC32MX470F512LT-I/TL on the 124-pin VTLA footprint - ST microcontrollers in this class use different packages (LQFP-100, LQFP-144, UFBGA-176) and ARM Cortex-M cores, so they require PCB redesign and firmware rewrite. For cross-vendor migration with similar Flash/RAM, the closest functional substitutes are STM32F407VGT6 (1 MB Flash, 192 KB RAM, LQFP-100) but pinout differs and is not drop-in.

Data referensi engineering untuk PIC32MX470F512LT-I/TL — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the PIC32MX470F512LT-I/TL when you need 512 KB Flash + 128 KB RAM + USB OTG + Ethernet RMII + 28-channel ADC in a 124-pin VTLA 9x9 mm footprint at 100 MHz - this is the highest-integration PIC32MX4 variant for USB-connected industrial or HMI designs. Choose the PIC32MX470F512LT-120I/TL if you need 20% more compute headroom on the same footprint and board layout. Choose the /PT variant (TQFP-100) for cost-sensitive layouts that can drop Ethernet and half the ADC channels. Choose the PIC32MX450F256LT-I/TL if you only need 256 KB Flash + 32 KB RAM with no Ethernet, on the same VTLA footprint. Choose the PIC32MX370 family only when this part's peripherals (USB OTG, Ethernet, CTMU) are not needed and the 80 MHz speed grade is sufficient.

Pembandingan dengan Alternatif

Parameter Umum	Produk Ini	PIC32MX470F512LT-120I/TL	PIC32MX470F512LT-I/PT	PIC32MX470F512L-I/PT	PIC32MX450F256LT-I/TL	PIC32MX370F512L-V/TL
Package	124-pin VTLA (9x9 mm)	124-pin VTLA (9x9 mm) - same	100-pin TQFP - different	100-pin TQFP - different	124-pin VTLA (9x9 mm) - same	124-pin VTLA (9x9 mm) - same
Brand	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology
Core Architecture	MIPS32 M4K	MIPS32 M4K	MIPS32 M4K	MIPS32 M4K	MIPS32 M4K	MIPS32 M4K
Max Clock Speed	100 MHz	120 MHz	100 MHz	100 MHz	100 MHz	80 MHz
Flash Memory	512 KB	512 KB	512 KB	512 KB	256 KB	512 KB
SRAM	128 KB	128 KB	128 KB	128 KB	32 KB	128 KB
USB Interface	USB 2.0 Full-Speed OTG	USB 2.0 Full-Speed OTG	USB 2.0 Full-Speed OTG	USB 2.0 Full-Speed OTG	USB 2.0 Full-Speed Device	USB 2.0 Full-Speed OTG
Ethernet	10/100 RMII	10/100 RMII	No (100-pin no Ethernet)	No (100-pin no Ethernet)	No	No
ADC Channels	28	28	14 (100-pin limited)	14 (100-pin limited)	28	28

Diferensiator Kunci

Largest Flash + RAM in the VTLA-124 footprint (vsPIC32MX450F256LT-I/TL)
Higher speed grade option with same footprint (vsPIC32MX470F512LT-120I/TL)
Dual-package family member (VTLA-124 and TQFP-100) (vsPIC32MX470F512LT-I/PT)

Catatan Desain

Place a 1 uF ceramic + 100 nF decoupling pair within 6 mm of every VDD/VSS pin pair on the PIC32MX470F512LT-I/TL, plus a 4.7 uF bulk capacitor near the IC. The VDDCORE pin (internal 1.8 V LDO output) requires its own 1 uF + 100 nF per the Microchip datasheet; failure to bypass the core rail causes Flash wait-state errors and brown-out resets at 100 MHz operation.

Route the USB DP/DM pair as a 90-ohm differential with no splits, keep the pair length under 50 mm, and place the VUSB decoupling cap within 2 mm of the VUSB pin. For Ethernet RMII, route the 50 MHz reference clock with 50-ohm controlled impedance and keep RMII traces under 50 mm - longer traces cause setup/hold violations on the Ethernet MAC.

Estimated: at 100 MHz, 3.3 V VDD, with all peripherals active, the PIC32MX470F512LT-I/TL draws approximately 65-75 mA (215-248 mW). The 124-pin VTLA 9x9 mm package has a thermal resistance of approximately 28 C/W to the exposed pad; tie the EPAD to a continuous VSS copper pour of at least 1 square inch to stay within the -40C to +85C industrial temperature range.

Do not skip the configuration of the configuration words - an unconfigured MCU will run but with brown-out and watchdog in undefined states. Always set the JTAG enable bit and the boot vector correctly per the family datasheet. For PMP graphics applications, the PMALL/PMAH/PMDIN/PMDOUT registers require precise timing; consult Microchip application note AN1365 for the chosen TFT controller.

Informasi Konformitas

RoHS

Compliant

REACH

Compliant

AEC-Q100

Not Applicable

Bebas Logam Lengket

Yes

Bebas Halogena

Yes

Mineral Konflik

Compliant

RoHS and REACH compliant per Microchip product page. Industrial -40C to +85C temperature grade per -I suffix. AEC-Q100 not applicable - this is a general-purpose MCU, not automotive-qualified.

Data disahkan pada: 2026-10-03 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Sumber: Manufacturer Product Page, Distributor, Distributor, Distributor, Octopart, Manufacturer Datasheet

Pencarian Terkait

PIC32MX470F512LT-I/TL PIC32MX470F512LT-I/TL datasheet Microchip PIC32MX470 512KB USB MCU PIC32MX4 124-pin VTLA USB OTG microcontroller PIC32MX470 vs PIC32MX450 PIC32MX470F512LT-I/TL price PIC32MX470F512LT-I/TL USB audio PIC32MX470F512LT-I/TL Ethernet RMII PIC32MX470F512LT-I/TL pinout VTLA MIPS32 M4K 100MHz 512KB flash what is the difference between PIC32MX470 and PIC32MX450 buy PIC32MX470F512LT-I/TL in stock PIC32MX470F512LT-I/TL drop-in replacement

Komponen dan Istilah Terkait

Microchip Technology PIC32MX470F512LT-I/TL PIC32MX470F512LT-120I/TL PIC32MX470F512LT-I/PT PIC32MX450F256LT-I/TL PIC32MX370F512L-V/TL MIPS32 M4K microcontroller 32-bit MCU USB 2.0 OTG Ethernet RMII 10-bit ADC CTMU VTLA-124 TQFP-100 QFN family surface mount RoHS REACH RTCC PMP graphics industrial temperature grade

PIC32MX430F064L-I/TL

Microchip Technology

Ajukan Diskon

PIC32MX450F128LT-V/TL

Microchip Technology

Ajukan Diskon

PIC32MZ1024ECG124T-I/TL

Microchip Technology

Ajukan Diskon

PIC32MZ1024ECM124-I/TL

Microchip Technology

Ajukan Diskon