PIC32MX795F512LT-80I/TL - 32-Bit 80MHz MCU 512KB | Microchip
MPN: PIC32MX795F512LT-80I/TL ✓ AktifPIC32MX795F512LT-80I/TL Ringkasan
A microcontroller unit (MCU) is a self-contained computer on a single chip that combines a processor core, program memory, data memory, and configurable peripherals. The PIC32MX795F512L sits in the 32-bit MCU class, above 8-bit and 16-bit devices, and below application processors such as the Cortex-A family. Within the Microchip PIC32MX5/6/7 series, it is the connectivity flagship, adding Ethernet MAC and dual CAN to the MIPS32 M4K pipeline.
Key differentiators include the integrated 10/100 Ethernet MAC with dedicated DMA, USB 2.0 full-speed OTG with an on-chip transceiver, dual CAN 2.0B modules, and 16-channel 10-bit ADC sampling at 1 Msps. The 512 KB Flash and 128 KB SRAM support RTOS-based applications and TCP/IP stacks without external memory.
The M4K core uses a 5-stage pipeline with a single-cycle 32x16 MAC, delivering 1.56 DMIPS/MHz. The peripheral pin select (PPS) feature remaps digital I/O to reduce PCB routing constraints, while the 8-channel DMA controller offloads data movement from the CPU.
Typical applications include industrial Ethernet gateways, CAN-to-Ethernet protocol bridges, motor control with field-oriented control, USB device/host instrumentation, and building automation controllers. The 2.3 V to 3.6 V operating range and -40C to +85C industrial temperature grade suit factory-floor environments.
When designing with this device, place the 0.1 uF decoupling capacitors within 5 mm of each VDD pin and keep the Ethernet differential pairs at 100 ohm impedance. The VTLA package requires a reflow profile matched to its exposed pad for reliable thermal and electrical grounding.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, replacement, and layout decisions.
Alternatif penggantian untuk PIC32MX795F512LT-80I/TL — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC32MX795F512LT-80I/TL (sama faktor bentuk dan footprint) — berbeda di dalam ADC, USB, Package, Ethernet, Operating Temperature.
PIC32MX795F512L-80I/TL
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX695F512LT-80I/TL
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX795F512LT-80I/TL Rating Maksimal & Karakteristik Listrik
| Core Processor | MIPS32 M4K 32-bit RISC |
| Maximum CPU Speed | 80 MHz |
| Performance | 1.56 DMIPS/MHz |
| Program Memory (Flash) | 512 KB (512K x 8) |
| SRAM | 128 KB |
| Boot Flash | 12 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| Suhu Kerja | -40C to +85C (industrial) |
| Paket | 124-pin VTLA (TL) 9x9 mm |
| Ethernet | 10/100 Mbit MAC with DMA |
| USB | USB 2.0 Full-Speed OTG with on-chip transceiver |
| CAN | 2x CAN 2.0B controllers |
| ADC | 16-channel 10-bit, 1 Msps |
| Serial Interfaces | 6x UART, 4x SPI, 5x I2C |
| DMA Channels | 8 |
| Timers | 5x 16-bit, 2x 32-bit |
| Tipe Mounting | Surface Mount |
| Status RoHS | Compliant |
Konfigurasi Pin PIC32MX795F512LT-80I/TL
| Pin produk 1 | VDD — Power supply |
| Pin produk 2 | VSS — Ground |
| Pin produk 3 | RA0 — Port A bit 0 / analog input |
| Pin produk 4 | RA1 — Port A bit 1 / analog input |
| Pin produk 5 | RB0 — Port B bit 0 |
| Pin produk 6 | RB1 — Port B bit 1 |
| Pin produk 7 | RB2 — Port B bit 2 |
| Pin produk 8 | RB3 — Port B bit 3 |
| Pin produk 9 | RB4 — Port B bit 4 |
| Pin produk 10 | RB5 — Port B bit 5 |
| Pin produk 11 | RB6 — Port B bit 6 |
| Pin produk 12 | RB7 — Port B bit 7 |
| Pin produk 13 | RB8 — Port B bit 8 |
| Pin produk 14 | RB9 — Port B bit 9 |
| Pin produk 15 | RB10 — Port B bit 10 |
| Pin produk 16 | RB11 — Port B bit 11 |
| Pin produk 17 | RB12 — Port B bit 12 |
| Pin produk 18 | RB13 — Port B bit 13 |
| Pin produk 19 | RB14 — Port B bit 14 |
| Pin produk 20 | RB15 — Port B bit 15 |
| Pin produk 21 | RC1 — Port C bit 1 |
| Pin produk 22 | RC2 — Port C bit 2 |
| Pin produk 23 | RC3 — Port C bit 3 |
| Pin produk 24 | RC4 — Port C bit 4 |
| Pin produk 25 | RC5 — Port C bit 5 |
| Pin produk 26 | RC6 — Port C bit 6 |
| Pin produk 27 | RC7 — Port C bit 7 |
| Pin produk 28 | RC8 — Port C bit 8 |
| Pin produk 29 | RC9 — Port C bit 9 |
| Pin produk 30 | VDD — Power supply |
| Pin produk 31 | VSS — Ground |
| Pin produk 32 | RD0 — Port D bit 0 |
| Pin produk 33 | RD1 — Port D bit 1 |
| Pin produk 34 | RD2 — Port D bit 2 |
| Pin produk 35 | RD3 — Port D bit 3 |
| Pin produk 36 | RD4 — Port D bit 4 |
| Pin produk 37 | RD5 — Port D bit 5 |
| Pin produk 38 | RD6 — Port D bit 6 |
| Pin produk 39 | RD7 — Port D bit 7 |
| Pin produk 40 | RD8 — Port D bit 8 |
| Pin produk 41 | RD9 — Port D bit 9 |
| Pin produk 42 | RD10 — Port D bit 10 |
| Pin produk 43 | RD11 — Port D bit 11 |
| Pin produk 44 | RD12 — Port D bit 12 |
| Pin produk 45 | RD13 — Port D bit 13 |
| Pin produk 46 | RD14 — Port D bit 14 |
| Pin produk 47 | RD15 — Port D bit 15 |
| Pin produk 48 | RE0 — Port E bit 0 |
| Pin produk 49 | RE1 — Port E bit 1 |
| Pin produk 50 | RE2 — Port E bit 2 |
| Pin produk 51 | RE3 — Port E bit 3 |
| Pin produk 52 | RE4 — Port E bit 4 |
| Pin produk 53 | RE5 — Port E bit 5 |
| Pin produk 54 | RE6 — Port E bit 6 |
| Pin produk 55 | RE7 — Port E bit 7 |
| Pin produk 56 | RF0 — Port F bit 0 |
| Pin produk 57 | RF1 — Port F bit 1 |
| Pin produk 58 | RF2 — Port F bit 2 |
| Pin produk 59 | RF3 — Port F bit 3 |
| Pin produk 60 | RF4 — Port F bit 4 |
| Pin produk 61 | RF5 — Port F bit 5 |
| Pin produk 62 | RF6 — Port F bit 6 |
| Pin produk 63 | RF7 — Port F bit 7 |
| Pin produk 64 | RF8 — Port F bit 8 |
| Pin produk 65 | RF9 — Port F bit 9 |
| Pin produk 66 | RF10 — Port F bit 10 |
| Pin produk 67 | RF11 — Port F bit 11 |
| Pin produk 68 | RF12 — Port F bit 12 |
| Pin produk 69 | RF13 — Port F bit 13 |
| Pin produk 70 | RF14 — Port F bit 14 |
| Pin produk 71 | RF15 — Port F bit 15 |
| Pin produk 72 | RG0 — Port G bit 0 |
| Pin produk 73 | RG1 — Port G bit 1 |
| Pin produk 74 | RG2 — Port G bit 2 |
| Pin produk 75 | RG3 — Port G bit 3 |
| Pin produk 76 | RG4 — Port G bit 4 |
| Pin produk 77 | RG5 — Port G bit 5 |
| Pin produk 78 | RG6 — Port G bit 6 |
| Pin produk 79 | RG7 — Port G bit 7 |
| Pin produk 80 | RG8 — Port G bit 8 |
| Pin produk 81 | RG9 — Port G bit 9 |
| Pin produk 82 | RG10 — Port G bit 10 |
| Pin produk 83 | RG11 — Port G bit 11 |
| Pin produk 84 | RG12 — Port G bit 12 |
| Pin produk 85 | RG13 — Port G bit 13 |
| Pin produk 86 | RG14 — Port G bit 14 |
| Pin produk 87 | RG15 — Port G bit 15 |
| Pin produk 88 | VDD — Power supply |
| Pin produk 89 | VSS — Ground |
| Pin produk 90 | AVDD — Analog power supply |
| Pin produk 91 | AVSS — Analog ground |
| Pin produk 92 | VREF+ — ADC positive reference |
| Pin produk 93 | VREF- — ADC negative reference |
| Pin produk 94 | MCLR — Master clear reset (active low) |
| Pin produk 95 | OSC1 — Primary oscillator input |
| Pin produk 96 | OSC2 — Primary oscillator output |
| Pin produk 97 | SOSCI — Secondary oscillator input |
| Pin produk 98 | SOSCO — Secondary oscillator output |
| Pin produk 99 | PGEC1 — Programming clock / debug |
| Pin produk 100 | PGED1 — Programming data / debug |
| Pin produk 101 | USBDP — USB D+ signal |
| Pin produk 102 | USBDM — USB D- signal |
| Pin produk 103 | ETXEN — Ethernet transmit enable |
| Pin produk 104 | ETXD0 — Ethernet transmit data 0 |
| Pin produk 105 | ETXD1 — Ethernet transmit data 1 |
| Pin produk 106 | ERXD0 — Ethernet receive data 0 |
| Pin produk 107 | ERXD1 — Ethernet receive data 1 |
| Pin produk 108 | ECRSDV — Ethernet carrier sense / receive data valid |
| Pin produk 109 | ERXERR — Ethernet receive error |
| Pin produk 110 | EREFCLK — Ethernet reference clock |
| Pin produk 111 | EMDC — Ethernet management data clock |
| Pin produk 112 | EMDIO — Ethernet management data I/O |
| Pin produk 113 | C1TX — CAN1 transmit |
| Pin produk 114 | C1RX — CAN1 receive |
| Pin produk 115 | C2TX — CAN2 transmit |
| Pin produk 116 | C2RX — CAN2 receive |
| Pin produk 117 | U1TX — UART1 transmit |
| Pin produk 118 | U1RX — UART1 receive |
| Pin produk 119 | U2TX — UART2 transmit |
| Pin produk 120 | U2RX — UART2 receive |
| Pin produk 121 | SCL1 — I2C1 clock |
| Pin produk 122 | SDA1 — I2C1 data |
| Pin produk 123 | SCK1 — SPI1 clock |
| Pin produk 124 | SDI1 — SPI1 data input |
Aplikasi Umum
PIC32MX795F512LT-80I/TL cocok untuk 6 aplikasis: Industrial Ethernet Gateway, CAN-to-Ethernet Protocol Bridge, Motor Control with Field-Oriented Control, USB Device and Host Instrumentation, Building Automation Controller, Data Acquisition and Signal Processing.
Industrial Ethernet Gateway
The PIC32MX795F512LT-80I/TL fits industrial Ethernet gateways because its integrated 10/100 Mbit MAC with dedicated DMA handles packet traffic without CPU intervention, while 512 KB Flash and 128 KB SRAM accommodate a full TCP/IP stack and Modbus TCP server. The 80 MHz M4K core at 1.56 DMIPS/MHz processes protocol translation between Ethernet and serial fieldbus links. In a typical design, the MAC connects to an external PHY through the RMII interface, and the dual CAN controllers bridge to CANopen devices. The trade-off versus a Cortex-M7 gateway is lower raw throughput, but the on-chip Ethernet MAC eliminates an external controller and reduces BOM cost.
Direkomendasikan
CAN-to-Ethernet Protocol Bridge
The PIC32MX795F512LT-80I/TL is ideal for CAN-to-Ethernet bridges because it integrates two CAN 2.0B controllers alongside the 10/100 Ethernet MAC, allowing simultaneous dual-bus CAN traffic and Ethernet uplink on one chip. The 8-channel DMA moves CAN and Ethernet frames without CPU load, and 128 KB SRAM buffers burst traffic during protocol conversion. In a bridge design, one CAN module connects to a vehicle bus and the other to a machine bus, while the Ethernet MAC forwards aggregated data to a supervisory system. The 2.3 V to 3.6 V supply and -40C to +85C rating suit factory-floor and automotive-adjacent environments.
Direkomendasikan
Motor Control with Field-Oriented Control
The PIC32MX795F512LT-80I/TL supports motor control applications through its 16-channel 10-bit ADC sampling at 1 Msps, which captures three-phase current feedback for field-oriented control loops. The 80 MHz M4K core with single-cycle 32x16 MAC executes Park and Clarke transforms in real time, while the five 16-bit timers generate complementary PWM with dead-time insertion. In a typical servo drive, the ADC samples shunt currents synchronized to PWM, and the DMA transfers results to RAM without CPU overhead. The trade-off versus a dedicated motor-control MCU is the absence of on-chip op-amps, but the integrated Ethernet enables remote drive monitoring.
Direkomendasikan
USB Device and Host Instrumentation
The PIC32MX795F512LT-80I/TL suits USB instrumentation because it integrates a USB 2.0 full-speed OTG controller with an on-chip transceiver, eliminating an external USB PHY. The 512 KB Flash stores firmware and data-logging buffers, while 128 KB SRAM supports USB endpoints and a command parser. In a data-acquisition instrument, the device enumerates as a CDC or HID device and streams ADC samples to a host PC. The 16-channel 10-bit ADC and 8-channel DMA allow continuous sampling without CPU intervention. The trade-off versus a dedicated USB MCU is higher power, but the integrated Ethernet and CAN add connectivity options.
Direkomendasikan
Building Automation Controller
The PIC32MX795F512LT-80I/TL fits building automation controllers because it combines Ethernet, dual CAN, and six UART channels for BACnet/IP, CANopen, and Modbus RTU connectivity on a single chip. The 512 KB Flash holds a building management stack, and 128 KB SRAM buffers sensor and actuator data across multiple buses. In a typical HVAC controller, the Ethernet MAC connects to the building backbone while UARTs interface to zone sensors and CAN links to VAV boxes. The -40C to +85C industrial temperature range and 2.3 V to 3.6 V supply support reliable operation in mechanical rooms. The trade-off is higher cost than an 8-bit controller, justified by integrated networking.
Direkomendasikan
Data Acquisition and Signal Processing
The PIC32MX795F512LT-80I/TL supports data acquisition because its 16-channel 10-bit ADC samples at 1 Msps and the 8-channel DMA streams results to SRAM without CPU intervention, enabling continuous multi-channel logging. The 80 MHz M4K core with single-cycle MAC executes FIR and IIR filters in real time, and 512 KB Flash stores calibration tables and firmware. In a typical DAQ node, the ADC digitizes sensor signals, DMA transfers blocks to RAM, and the core applies filtering before transmitting over Ethernet or USB. The trade-off versus a dedicated DSP is lower MIPS, but the integrated connectivity and memory reduce system cost.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC32MX795F512LT-80I/TL — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC32MX795F512L-80I/TL | PIC32MX795F512L-80V/PF | PIC32MX695F512LT-80I/TL | PIC32MX775F512LT-80I/PT | PIC32MX795F512LT-80I/BG |
|---|---|---|---|---|---|---|
| Package | 124-pin VTLA (TL) | 124-pin VTLA (TL) - same | 100-pin TQFP (PF) | 124-pin VTLA (TL) - same | 100-pin TQFP (PT) | 124-pin XBGA (BG) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Speed | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Ethernet MAC | 10/100 Mbit with DMA | 10/100 Mbit with DMA | 10/100 Mbit with DMA | None | 10/100 Mbit with DMA | 10/100 Mbit with DMA |
| CAN Controllers | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B |
| USB | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +105C | -40C to +85C | -40C to +85C | -40C to +85C |
| Packaging | Tape & Reel | Tray | Tray | Tape & Reel | Tray | Tape & Reel |
Diferensiator Kunci
- Integrated 10/100 Ethernet MAC with DMA (vsPIC32MX695F512LT-80I/TL)
- Tape-and-reel packaging for automated assembly (vsPIC32MX795F512L-80I/TL)
- Dual CAN 2.0B plus Ethernet on one die (vsPIC32MX775F512LT-80I/PT)
Catatan Desain
Decouple every VDD pin with a 0.1 uF ceramic capacitor placed within 5 mm of the pin, plus a 10 uF bulk capacitor near the package. The PIC32MX795F512LT-80I/TL draws transient current during 80 MHz operation; inadequate decoupling causes clock jitter and Ethernet packet errors. Use a solid ground plane under the device and connect the exposed pad to ground with multiple vias.
Route the Ethernet RMII signals (ETXD0/1, ERXD0/1, EREFCLK) as 50 ohm controlled-impedance traces and keep them matched in length within 5 mm. Place the external PHY within 25 mm of the MCU to minimize skew. Keep the USB D+/D- pair at 90 ohm differential impedance and avoid stubs. The 124-pin VTLA exposed pad must be soldered with adequate via stitching for thermal relief.
Do not exceed the 3.6 V maximum supply voltage; the PIC32MX795F512LT-80I/TL is not 5 V tolerant on all pins. Verify the VREF+ and VREF- connections for the ADC, as floating references cause inaccurate conversions. Ensure the MCLR pin has a 10 kohm pull-up and 0.1 uF capacitor to prevent spurious resets. Confirm the oscillator circuit matches the datasheet's recommended load capacitors for the selected crystal.
Informasi Konformitas
RoHS compliant per Microchip product page. Not AEC-Q100 qualified; industrial temperature grade only.
