PIC32MZ1024EFK064T-I/PT - 32-bit 200MHz MCU, 1MB Flash | Microchip
MPN: PIC32MZ1024EFK064T-I/PT ✓ AktifPIC32MZ1024EFK064T-I/PT Ringkasan
What is a 32-bit MCU? A 32-bit microcontroller (MCU) is a single-chip computer with a 32-bit data path, register file, and arithmetic logic unit, enabling high-throughput processing for embedded systems. The PIC32MZ EF family sits at the top of Microchip's PIC32 line, providing a MIPS Warrior M-class core, advanced peripherals, and connectivity features. The taxonomy is: microcontroller -> embedded processor -> SoC -> semiconductor.
Key features of the PIC32MZ1024EFK064T-I/PT include a 200 MHz core with 330 DMIPS performance, a double-precision FPU, 1 MB Flash program memory, 256 KB SRAM, USB 2.0 High-Speed On-The-Go, 10/100 Ethernet MAC, dual CAN modules, hardware Crypto engine, 12-bit ADC up to 18 Msps, analog comparators, and multiple SPI/I2C/UART interfaces. The 64-pin TQFP package enables compact PCB integration.
The architecture uses a Harvard-based MIPS32 M-class core with separate instruction and data buses, supported by 8-channel DMA, a 16-bit parallel master port, and configurable I/O. The Crypto accelerator supports AES, DES, SHA, and HMAC, offloading cryptographic workloads from the CPU. The high-performance bus matrix enables concurrent peripheral operation with deterministic latency.
Typical applications include industrial IoT gateways, automotive body and connectivity modules, HMI graphics displays, motor control drives, Ethernet-connected sensors, USB peripherals, and medical instrumentation. The combination of Ethernet, USB-HS, CAN, and Crypto makes the part a strong choice for secure connected nodes.
Design considerations include proper decoupling of AVDD/AVSS rails, PCB layout for the 64-pin TQFP 10x10 mm footprint, and supply sequencing for analog and digital domains. Use the MPLAB Harmony ecosystem and the PIC32MZ EF family header files to accelerate firmware development.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for the PIC32MZ1024EFK064T-I/PT.
Alternatif penggantian untuk PIC32MZ1024EFK064T-I/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC32MZ1024EFK064T-I/PT (sama faktor bentuk dan footprint) — berbeda di dalam ADC, Package, USB, Operating Temperature, Core.
PIC32MZ1024EFK064-I/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MZ1024EFK064-E/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MZ1024EFE064-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1024EFG064T-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1024EFF064-I/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MZ1024ECM064T-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1024ECH064-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1024EFK064T-I/PT Rating Maksimal & Karakteristik Listrik
| Core | MIPS32 M-Class (MIPS Warrior) |
| Core Architecture | 32-bit RISC with FPU and DSP extensions |
| Maximum CPU Frequency | 200 MHz |
| DMIPS Performance | 330 DMIPS |
| FPU | IEEE 754-compliant double-precision |
| Program Flash Memory | 1024 KB (1 MB) |
| SRAM | 256 KB |
| Operating Voltage Range | 2.2 V to 3.6 V |
| Rentang Suhu Kerja | -40C to +85C (Industrial) |
| Paket | 64-pin TQFP (PT) 10x10 mm |
| Tipe Mounting | Surface Mount |
| USB | USB 2.0 High-Speed OTG |
| Ethernet | 10/100 Mbps MAC |
| CAN | 2x CAN 2.0B |
| Crypto Accelerator | AES, DES, 3DES, SHA-1/2, MD5, HMAC |
| ADC | 12-bit, up to 18 Msps |
| DMA Channels | 8 |
| Level MSL | 3 (168 hours) |
| Status RoHS | Compliant |
Konfigurasi Pin PIC32MZ1024EFK064T-I/PT
| Pin produk 1 | RG9 — General purpose I/O |
| Pin produk 2 | RG6 — General purpose I/O |
| Pin produk 3 | RG7 — General purpose I/O |
| Pin produk 4 | RG8 — General purpose I/O |
| Pin produk 5 | VSS — Ground |
| Pin produk 6 | AVSS — Analog ground |
| Pin produk 7 | AVDD — Analog supply |
| Pin produk 8 | RH4 — General purpose I/O |
| Pin produk 9 | RH5 — General purpose I/O |
| Pin produk 10 | RB5 — General purpose I/O / AN5 |
| Pin produk 11 | RB4 — General purpose I/O / AN4 |
| Pin produk 12 | RB3 — General purpose I/O / AN3 |
| Pin produk 13 | RB2 — General purpose I/O / AN2 |
| Pin produk 14 | RB1 — General purpose I/O / AN1 |
| Pin produk 15 | RB0 — General purpose I/O / AN0 |
| Pin produk 16 | RB6 — General purpose I/O / AN6 |
| Pin produk 17 | RB7 — General purpose I/O / AN7 |
| Pin produk 18 | VSS — Ground |
| Pin produk 19 | VDD — Digital supply |
| Pin produk 20 | RB8 — General purpose I/O / AN8 |
| Pin produk 21 | RB9 — General purpose I/O / AN9 |
| Pin produk 22 | RB10 — General purpose I/O / AN10 |
| Pin produk 23 | RB11 — General purpose I/O / AN11 |
| Pin produk 24 | RB12 — General purpose I/O / AN12 |
| Pin produk 25 | RB13 — General purpose I/O / AN13 |
| Pin produk 26 | RB14 — General purpose I/O / AN14 |
| Pin produk 27 | RB15 — General purpose I/O / AN15 |
| Pin produk 28 | VSS — Ground |
| Pin produk 29 | VDD — Digital supply |
| Pin produk 30 | RD0 — General purpose I/O |
| Pin produk 31 | RD1 — General purpose I/O |
| Pin produk 32 | RD2 — General purpose I/O |
| Pin produk 33 | RD3 — General purpose I/O |
| Pin produk 34 | RD4 — General purpose I/O |
| Pin produk 35 | RD5 — General purpose I/O |
| Pin produk 36 | RD6 — General purpose I/O |
| Pin produk 37 | RD7 — General purpose I/O |
| Pin produk 38 | VSS — Ground |
| Pin produk 39 | VDD — Digital supply |
| Pin produk 40 | RC1 — General purpose I/O |
| Pin produk 41 | RC2 — General purpose I/O |
| Pin produk 42 | RC3 — General purpose I/O |
| Pin produk 43 | RC4 — General purpose I/O |
| Pin produk 44 | RF0 — General purpose I/O |
| Pin produk 45 | RF1 — General purpose I/O |
| Pin produk 46 | RF2 — General purpose I/O |
| Pin produk 47 | RF3 — General purpose I/O |
| Pin produk 48 | RF4 — General purpose I/O |
| Pin produk 49 | RF5 — General purpose I/O |
| Pin produk 50 | VSS — Ground |
| Pin produk 51 | VDD — Digital supply |
| Pin produk 52 | RG15 — General purpose I/O |
| Pin produk 53 | RA0 — General purpose I/O |
| Pin produk 54 | RA1 — General purpose I/O |
| Pin produk 55 | RA2 — General purpose I/O |
| Pin produk 56 | RA3 — General purpose I/O |
| Pin produk 57 | RA4 — General purpose I/O |
| Pin produk 58 | RA5 — General purpose I/O |
| Pin produk 59 | RA6 — General purpose I/O |
| Pin produk 60 | RA7 — General purpose I/O |
| Pin produk 61 | RA8 — General purpose I/O |
| Pin produk 62 | RA9 — General purpose I/O |
| Pin produk 63 | RA10 — General purpose I/O |
| Pin produk 64 | RG2 — General purpose I/O / MCLR |
Aplikasi Umum
PIC32MZ1024EFK064T-I/PT cocok untuk 7 aplikasis: Industrial IoT Gateway, Automotive Connectivity Module, HMI Graphics Display Controller, USB Peripheral / HID Device, Motor Control Drive (BLDC/PMSM), Medical Instrumentation, Secure Connected Sensor Node.
Industrial IoT Gateway
The PIC32MZ1024EFK064T-I/PT fits industrial IoT gateways because of its 200 MHz CPU, 1 MB Flash, and 256 KB SRAM, which together run TLS/DTLS, MQTT, and HTTP servers with hardware Crypto acceleration. Integrated 10/100 Ethernet MAC plus USB-HS OTG lets the gateway act as both wired node and USB peripheral. Dual CAN 2.0B interfaces allow bridging to industrial fieldbuses without external controllers. The 64-pin TQFP supports compact DIN-rail designs at industrial temperature range.
Direkomendasikan
Automotive Connectivity Module
The PIC32MZ1024EFK064T-I/PT enables automotive connectivity modules by combining dual CAN 2.0B, USB-HS, and Ethernet in a single chip. The hardware Crypto engine accelerates secure boot and TLS for telematics units. The 1 MB Flash accommodates OBD-II stacks and firmware-over-the-air update storage. Industrial-grade -40C to +85C operation suits cabin and under-hood scenarios; for harsher environments, choose PIC32MZ1024EFK064-E/PT extended grade.
Direkomendasikan
HMI Graphics Display Controller
The PIC32MZ1024EFK064T-I/PT drives HMI graphics displays with its 200 MHz MIPS core, 256 KB SRAM, and parallel master port supporting TFT LCD panels. The 12-bit ADC at 18 Msps enables touch-screen acquisition alongside graphics refresh. For higher framebuffer headroom, drop in PIC32MZ1024EFG064T-I/PT with 512 KB SRAM. The 64-pin TQFP footprint simplifies layout for compact touch panels.
Direkomendasikan
USB Peripheral / HID Device
The PIC32MZ1024EFK064T-I/PT is well-suited for USB peripherals thanks to its integrated USB 2.0 High-Speed OTG controller and 200 MHz MIPS core. The hardware Crypto accelerator enables encrypted USB storage or secure HID devices. With 1 MB Flash and 256 KB SRAM, the part runs vendor-class stacks without external memory. The 64-pin TQFP enables compact dongle form factors.
Direkomendasikan
Motor Control Drive (BLDC/PMSM)
The PIC32MZ1024EFK064T-I/PT supports BLDC/PMSM motor control with its 200 MHz MIPS core, 12-bit ADC at 18 Msps, and DSP-extended single-cycle MAC. FOC algorithms run within 256 KB SRAM; the FPU enables IEEE 754 transform calculations. Up to 9 timers provide PWM, capture, and quadrature decoding. The 64-pin TQFP package fits compact integrated motor-control PCBs.
Direkomendasikan
Medical Instrumentation
The PIC32MZ1024EFK064T-I/PT powers portable medical instruments due to its deterministic 200 MHz core, hardware Crypto for HIPAA-compliant data protection, and 12-bit ADC at 18 Msps for biosignal acquisition. USB-HS OTG supports fast data offload to clinical PCs. Industrial-grade temperature range supports home and clinical environments. The 64-pin TQFP enables miniaturized handheld enclosures.
Direkomendasikan
Secure Connected Sensor Node
The PIC32MZ1024EFK064T-I/PT anchors secure connected sensor nodes via its hardware Crypto engine (AES, SHA, HMAC), Ethernet MAC, and 200 MHz MIPS core. TLS, DTLS, and IPsec run on-chip with 1 MB Flash and 256 KB SRAM. The industrial temperature grade and 64-pin TQFP package suit outdoor and industrial enclosures. The part supports OTA firmware updates with secure boot.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC32MZ1024EFK064T-I/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC32MZ1024EFK064-I/PT | PIC32MZ1024EFK064-E/PT | PIC32MZ1024EFE064-I/PT | PIC32MZ1024EFG064T-I/PT | PIC32MZ1024EFF064-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm |
| Flash Memory | 1024 KB | 1024 KB | 1024 KB | 1024 KB | 1024 KB | 1024 KB |
| SRAM | 256 KB | 256 KB | 256 KB | 256 KB | 512 KB with ECC | 256 KB |
| CPU Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Crypto Engine | Yes (AES, DES, SHA, MD5, HMAC) | Yes | Yes | No | Yes | No |
| USB | USB 2.0 High-Speed OTG | USB 2.0 High-Speed OTG | USB 2.0 High-Speed OTG | USB 2.0 High-Speed OTG | USB 2.0 High-Speed OTG | USB 2.0 Full-Speed |
| Temperature Grade | Industrial -40C to +85C | Industrial -40C to +85C | Extended -40C to +125C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C |
| CAN Modules | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B | 1x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B |
Diferensiator Kunci
- Industrial-grade silicon with -40C to +85C operating range and Crypto engine in TQFP-64 (vsPIC32MZ1024EFE064-I/PT)
- Higher operating temperature grade option (vsPIC32MZ1024EFK064-I/PT)
- USB 2.0 High-Speed OTG with integrated PHY (vsPIC32MZ1024EFF064-I/PT)
Catatan Desain
Decouple VDD/AVDD pins with 100 nF ceramic capacitors placed within 5 mm of each pin, and bulk 4.7 uF tantalum on each VDD/AVDD pair. Separate analog and digital grounds using a star-ground topology at the bottom of the PCB. AVDD must be driven by a low-noise LDO (e.g., MCP1700) to avoid coupling switching noise into the 12-bit ADC. Power sequencing is not strictly required but matching VDD and AVDD ramp-up within 10 ms prevents ADC offset drift.
The 64-pin TQFP 10x10 mm footprint has 0.5 mm pitch and requires 0.25 mm-wide traces with 0.20 mm clearance per IPC-2221 Class 2. Use a 4-layer PCB with continuous GND plane under the IC to provide low-impedance return paths. Exposed thermal pad (if present on variant) should be soldered to a flooded copper pour with thermal vias to the bottom plane. Place 32.768 kHz crystal traces short and guarded by ground.
Do not exceed the maximum VDD of 3.6 V - the PIC32MZ1024EFK064T-I/PT is NOT 5 V tolerant. All I/O pins are 3.3 V logic; interface to 5 V systems requires level shifters such as the TXS0108E. The MCLR pin is required for proper reset - leaving it floating causes undefined startup behavior. The USB-HS D+/D- traces must be 90 ohm differential and length-matched within 150 mil; see Microchip AN2626 for details.
The Ethernet RMII signals to an external PHY (e.g., KSZ8081) must be length-matched within 50 mil and routed over a continuous ground plane. The 50 MHz RMII reference clock should be sourced from a low-jitter oscillator and kept away from switching nodes. Place series 33 ohm damping resistors near the MCU pins on RMII TX/RX lines to reduce reflections. Crystal traces for the primary 12 MHz oscillator must be routed symmetrically with short, equal-length traces.
Informasi Konformitas
RoHS compliant per Microchip product page. The -E/PT extended temperature variant is suitable for automotive applications but is not formally AEC-Q100 qualified; for AEC-Q100 select the AEC-Q100 qualified variant separately.
