PIC32MZ1024EFK064T-I/PT - 32-bit 200MHz MCU, 1MB Flash | Microchip
部品番号: PIC32MZ1024EFK064T-I/PT ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $9.85 | $9.85 |
| 10 | $8.92 | $89.20 |
| 100 | $7.65 | $765.00 |
| 500 | $6.88 | $3,440.00 |
| 1,000 | $6.12 | $6,120.00 |
PIC32MZ1024EFK064T-I/PT 概要
What is a 32-bit MCU? A 32-bit microcontroller (MCU) is a single-chip computer with a 32-bit data path, register file, and arithmetic logic unit, enabling high-throughput processing for embedded systems. The PIC32MZ EF family sits at the top of Microchip's PIC32 line, providing a MIPS Warrior M-class core, advanced peripherals, and connectivity features. The taxonomy is: microcontroller -> embedded processor -> SoC -> semiconductor.
Key features of the PIC32MZ1024EFK064T-I/PT include a 200 MHz core with 330 DMIPS performance, a double-precision FPU, 1 MB Flash program memory, 256 KB SRAM, USB 2.0 High-Speed On-The-Go, 10/100 Ethernet MAC, dual CAN modules, hardware Crypto engine, 12-bit ADC up to 18 Msps, analog comparators, and multiple SPI/I2C/UART interfaces. The 64-pin TQFP package enables compact PCB integration.
The architecture uses a Harvard-based MIPS32 M-class core with separate instruction and data buses, supported by 8-channel DMA, a 16-bit parallel master port, and configurable I/O. The Crypto accelerator supports AES, DES, SHA, and HMAC, offloading cryptographic workloads from the CPU. The high-performance bus matrix enables concurrent peripheral operation with deterministic latency.
Typical applications include industrial IoT gateways, automotive body and connectivity modules, HMI graphics displays, motor control drives, Ethernet-connected sensors, USB peripherals, and medical instrumentation. The combination of Ethernet, USB-HS, CAN, and Crypto makes the part a strong choice for secure connected nodes.
Design considerations include proper decoupling of AVDD/AVSS rails, PCB layout for the 64-pin TQFP 10x10 mm footprint, and supply sequencing for analog and digital domains. Use the MPLAB Harmony ecosystem and the PIC32MZ EF family header files to accelerate firmware development.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for the PIC32MZ1024EFK064T-I/PT.
ドロップイン代替品: PIC32MZ1024EFK064T-I/PT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC32MZ1024EFK064T-I/PT （同一形状・フットプリント） — 相違点: ADC, Package, USB, Operating Temperature, Core.
クイック比較ツール — 並列比較する代替部品を選択:
PIC32MZ1024EFK064-I/PT
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MZ1024EFK064-E/PT
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MZ1024EFE064-I/PT
✅ ドロップイン✓ 在庫あり
$6.2 / 個
データシートを見る →PIC32MZ1024EFG064T-I/PT
✅ ドロップイン✓ 在庫あり
$7.74 / 個
データシートを見る →PIC32MZ1024EFF064-I/PT
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MZ1024ECM064T-I/PT
✅ ドロップイン✓ 在庫あり
$8.95 / 個
データシートを見る →PIC32MZ1024ECH064-I/PT
✅ ドロップイン✓ 在庫あり
$7.2 / 個
データシートを見る →PIC32MZ1024EFK064T-I/PT 最大定格＆電気的特性
| Core | MIPS32 M-Class (MIPS Warrior) |
| Core Architecture | 32-bit RISC with FPU and DSP extensions |
| Maximum CPU Frequency | 200 MHz |
| DMIPS Performance | 330 DMIPS |
| FPU | IEEE 754-compliant double-precision |
| Program Flash Memory | 1024 KB (1 MB) |
| SRAM | 256 KB |
| Operating Voltage Range | 2.2 V to 3.6 V |
| 動作温度範囲 | -40C to +85C (Industrial) |
| パッケージ | 64-pin TQFP (PT) 10x10 mm |
| 実装タイプ | Surface Mount |
| USB | USB 2.0 High-Speed OTG |
| Ethernet | 10/100 Mbps MAC |
| CAN | 2x CAN 2.0B |
| Crypto Accelerator | AES, DES, 3DES, SHA-1/2, MD5, HMAC |
| ADC | 12-bit, up to 18 Msps |
| DMA Channels | 8 |
| MSLレベル | 3 (168 hours) |
| RoHS ステータス | Compliant |
PIC32MZ1024EFK064T-I/PT ピン構成
| ピン 1 | RG9 — General purpose I/O |
| ピン 2 | RG6 — General purpose I/O |
| ピン 3 | RG7 — General purpose I/O |
| ピン 4 | RG8 — General purpose I/O |
| ピン 5 | VSS — Ground |
| ピン 6 | AVSS — Analog ground |
| ピン 7 | AVDD — Analog supply |
| ピン 8 | RH4 — General purpose I/O |
| ピン 9 | RH5 — General purpose I/O |
| ピン 10 | RB5 — General purpose I/O / AN5 |
| ピン 11 | RB4 — General purpose I/O / AN4 |
| ピン 12 | RB3 — General purpose I/O / AN3 |
| ピン 13 | RB2 — General purpose I/O / AN2 |
| ピン 14 | RB1 — General purpose I/O / AN1 |
| ピン 15 | RB0 — General purpose I/O / AN0 |
| ピン 16 | RB6 — General purpose I/O / AN6 |
| ピン 17 | RB7 — General purpose I/O / AN7 |
| ピン 18 | VSS — Ground |
| ピン 19 | VDD — Digital supply |
| ピン 20 | RB8 — General purpose I/O / AN8 |
| ピン 21 | RB9 — General purpose I/O / AN9 |
| ピン 22 | RB10 — General purpose I/O / AN10 |
| ピン 23 | RB11 — General purpose I/O / AN11 |
| ピン 24 | RB12 — General purpose I/O / AN12 |
| ピン 25 | RB13 — General purpose I/O / AN13 |
| ピン 26 | RB14 — General purpose I/O / AN14 |
| ピン 27 | RB15 — General purpose I/O / AN15 |
| ピン 28 | VSS — Ground |
| ピン 29 | VDD — Digital supply |
| ピン 30 | RD0 — General purpose I/O |
| ピン 31 | RD1 — General purpose I/O |
| ピン 32 | RD2 — General purpose I/O |
| ピン 33 | RD3 — General purpose I/O |
| ピン 34 | RD4 — General purpose I/O |
| ピン 35 | RD5 — General purpose I/O |
| ピン 36 | RD6 — General purpose I/O |
| ピン 37 | RD7 — General purpose I/O |
| ピン 38 | VSS — Ground |
| ピン 39 | VDD — Digital supply |
| ピン 40 | RC1 — General purpose I/O |
| ピン 41 | RC2 — General purpose I/O |
| ピン 42 | RC3 — General purpose I/O |
| ピン 43 | RC4 — General purpose I/O |
| ピン 44 | RF0 — General purpose I/O |
| ピン 45 | RF1 — General purpose I/O |
| ピン 46 | RF2 — General purpose I/O |
| ピン 47 | RF3 — General purpose I/O |
| ピン 48 | RF4 — General purpose I/O |
| ピン 49 | RF5 — General purpose I/O |
| ピン 50 | VSS — Ground |
| ピン 51 | VDD — Digital supply |
| ピン 52 | RG15 — General purpose I/O |
| ピン 53 | RA0 — General purpose I/O |
| ピン 54 | RA1 — General purpose I/O |
| ピン 55 | RA2 — General purpose I/O |
| ピン 56 | RA3 — General purpose I/O |
| ピン 57 | RA4 — General purpose I/O |
| ピン 58 | RA5 — General purpose I/O |
| ピン 59 | RA6 — General purpose I/O |
| ピン 60 | RA7 — General purpose I/O |
| ピン 61 | RA8 — General purpose I/O |
| ピン 62 | RA9 — General purpose I/O |
| ピン 63 | RA10 — General purpose I/O |
| ピン 64 | RG2 — General purpose I/O / MCLR |
主な用途
PIC32MZ1024EFK064T-I/PT の用途: 7 件s: Industrial IoT Gateway, Automotive Connectivity Module, HMI Graphics Display Controller, USB Peripheral / HID Device, Motor Control Drive (BLDC/PMSM), Medical Instrumentation, Secure Connected Sensor Node.
Industrial IoT Gateway
The PIC32MZ1024EFK064T-I/PT fits industrial IoT gateways because of its 200 MHz CPU, 1 MB Flash, and 256 KB SRAM, which together run TLS/DTLS, MQTT, and HTTP servers with hardware Crypto acceleration. Integrated 10/100 Ethernet MAC plus USB-HS OTG lets the gateway act as both wired node and USB peripheral. Dual CAN 2.0B interfaces allow bridging to industrial fieldbuses without external controllers. The 64-pin TQFP supports compact DIN-rail designs at industrial temperature range.
おすすめ
Automotive Connectivity Module
The PIC32MZ1024EFK064T-I/PT enables automotive connectivity modules by combining dual CAN 2.0B, USB-HS, and Ethernet in a single chip. The hardware Crypto engine accelerates secure boot and TLS for telematics units. The 1 MB Flash accommodates OBD-II stacks and firmware-over-the-air update storage. Industrial-grade -40C to +85C operation suits cabin and under-hood scenarios; for harsher environments, choose PIC32MZ1024EFK064-E/PT extended grade.
おすすめ
HMI Graphics Display Controller
The PIC32MZ1024EFK064T-I/PT drives HMI graphics displays with its 200 MHz MIPS core, 256 KB SRAM, and parallel master port supporting TFT LCD panels. The 12-bit ADC at 18 Msps enables touch-screen acquisition alongside graphics refresh. For higher framebuffer headroom, drop in PIC32MZ1024EFG064T-I/PT with 512 KB SRAM. The 64-pin TQFP footprint simplifies layout for compact touch panels.
おすすめ
USB Peripheral / HID Device
The PIC32MZ1024EFK064T-I/PT is well-suited for USB peripherals thanks to its integrated USB 2.0 High-Speed OTG controller and 200 MHz MIPS core. The hardware Crypto accelerator enables encrypted USB storage or secure HID devices. With 1 MB Flash and 256 KB SRAM, the part runs vendor-class stacks without external memory. The 64-pin TQFP enables compact dongle form factors.
おすすめ
Motor Control Drive (BLDC/PMSM)
The PIC32MZ1024EFK064T-I/PT supports BLDC/PMSM motor control with its 200 MHz MIPS core, 12-bit ADC at 18 Msps, and DSP-extended single-cycle MAC. FOC algorithms run within 256 KB SRAM; the FPU enables IEEE 754 transform calculations. Up to 9 timers provide PWM, capture, and quadrature decoding. The 64-pin TQFP package fits compact integrated motor-control PCBs.
おすすめ
Medical Instrumentation
The PIC32MZ1024EFK064T-I/PT powers portable medical instruments due to its deterministic 200 MHz core, hardware Crypto for HIPAA-compliant data protection, and 12-bit ADC at 18 Msps for biosignal acquisition. USB-HS OTG supports fast data offload to clinical PCs. Industrial-grade temperature range supports home and clinical environments. The 64-pin TQFP enables miniaturized handheld enclosures.
おすすめ
Secure Connected Sensor Node
The PIC32MZ1024EFK064T-I/PT anchors secure connected sensor nodes via its hardware Crypto engine (AES, SHA, HMAC), Ethernet MAC, and 200 MHz MIPS core. TLS, DTLS, and IPsec run on-chip with 1 MB Flash and 256 KB SRAM. The industrial temperature grade and 64-pin TQFP package suit outdoor and industrial enclosures. The part supports OTA firmware updates with secure boot.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC32MZ1024EFK064T-I/PT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC32MZ1024EFK064-I/PT | PIC32MZ1024EFK064-E/PT | PIC32MZ1024EFE064-I/PT | PIC32MZ1024EFG064T-I/PT | PIC32MZ1024EFF064-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm |
| Flash Memory | 1024 KB | 1024 KB | 1024 KB | 1024 KB | 1024 KB | 1024 KB |
| SRAM | 256 KB | 256 KB | 256 KB | 256 KB | 512 KB with ECC | 256 KB |
| CPU Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Crypto Engine | Yes (AES, DES, SHA, MD5, HMAC) | Yes | Yes | No | Yes | No |
| USB | USB 2.0 High-Speed OTG | USB 2.0 High-Speed OTG | USB 2.0 High-Speed OTG | USB 2.0 High-Speed OTG | USB 2.0 High-Speed OTG | USB 2.0 Full-Speed |
| Temperature Grade | Industrial -40C to +85C | Industrial -40C to +85C | Extended -40C to +125C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C |
| CAN Modules | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B | 1x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B |
主な差別化要因
- Industrial-grade silicon with -40C to +85C operating range and Crypto engine in TQFP-64 （vs PIC32MZ1024EFE064-I/PT)
- Higher operating temperature grade option （vs PIC32MZ1024EFK064-I/PT)
- USB 2.0 High-Speed OTG with integrated PHY （vs PIC32MZ1024EFF064-I/PT)
設計ノート
Decouple VDD/AVDD pins with 100 nF ceramic capacitors placed within 5 mm of each pin, and bulk 4.7 uF tantalum on each VDD/AVDD pair. Separate analog and digital grounds using a star-ground topology at the bottom of the PCB. AVDD must be driven by a low-noise LDO (e.g., MCP1700) to avoid coupling switching noise into the 12-bit ADC. Power sequencing is not strictly required but matching VDD and AVDD ramp-up within 10 ms prevents ADC offset drift.
The 64-pin TQFP 10x10 mm footprint has 0.5 mm pitch and requires 0.25 mm-wide traces with 0.20 mm clearance per IPC-2221 Class 2. Use a 4-layer PCB with continuous GND plane under the IC to provide low-impedance return paths. Exposed thermal pad (if present on variant) should be soldered to a flooded copper pour with thermal vias to the bottom plane. Place 32.768 kHz crystal traces short and guarded by ground.
Do not exceed the maximum VDD of 3.6 V - the PIC32MZ1024EFK064T-I/PT is NOT 5 V tolerant. All I/O pins are 3.3 V logic; interface to 5 V systems requires level shifters such as the TXS0108E. The MCLR pin is required for proper reset - leaving it floating causes undefined startup behavior. The USB-HS D+/D- traces must be 90 ohm differential and length-matched within 150 mil; see Microchip AN2626 for details.
The Ethernet RMII signals to an external PHY (e.g., KSZ8081) must be length-matched within 50 mil and routed over a continuous ground plane. The 50 MHz RMII reference clock should be sourced from a low-jitter oscillator and kept away from switching nodes. Place series 33 ohm damping resistors near the MCU pins on RMII TX/RX lines to reduce reflections. Crystal traces for the primary 12 MHz oscillator must be routed symmetrically with short, equal-length traces.
コンプライアンス情報
RoHS compliant per Microchip product page. The -E/PT extended temperature variant is suitable for automotive applications but is not formally AEC-Q100 qualified; for AEC-Q100 select the AEC-Q100 qualified variant separately.
