R5F101PLAFB#30 - 32MHz 512KB 16-Bit MCU | Renesas
MPN: R5F101PLAFB#30 ✓ AktifR5F101PLAFB#30 Ringkasan
The RL78/G13 family is a microcontroller family combining a 16-bit CPU, flash program memory, data flash, on-chip oscillators, analog-to-digital conversion, and low-power operating modes. Its CPU consumes 66 µA/MHz, while STOP standby consumption is 230 nA. The manufacturer describes the family as delivering 43.2 DMIPS at 32 MHz, making it suitable for embedded systems that require efficient code execution without a high-power application processor.
Key features of the R5F101PLAFB#30 include 512 KB flash, 32 KB SRAM, a 32-bit CPU operating at 32 MHz, and a 100-LQFP package. The integrated analog and timing resources allow a compact design to handle sensing, control, communications, and local user-interface functions without requiring several external components. The RL78 architecture is commonly used in appliances, industrial equipment, meters, and other compact embedded-control products.
The low-power characteristics are important for battery-powered or intermittently powered equipment. The 230 nA STOP-mode current provides a low idle-state burden, while the 66 µA/MHz operating specification supports applications in which the duty cycle of active processing is limited. The device also includes built-in safety functions for detecting illegal hardware operation, as described by Renesas for household-appliance safety applications.
Use the manufacturer datasheet and the RL78/G13 user’s manual for the complete peripheral list, electrical limits, clock configuration, and programming instructions. Confirm the exact 100-LQFP footprint and pin assignments before layout, especially because the product is also described in distributor listings as 100-LFQFP. Decoupling, programming, and clock requirements should be implemented according to the device's official application guidance.
This product page combines the manufacturer part characteristics, verified distributor listings, and practical guidance for evaluating the R5F101PLAFB#30 in low-power embedded systems. It highlights the part's 32 MHz processing capability, 512 KB flash, 32 KB RAM, 1.6 V to 5.5 V supply range, and low-power operating modes.
Alternatif penggantian untuk R5F101PLAFB#30 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
R5F101PLAFB#V0
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
R5F1016PLAFB#30
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
R5F1015PLAFB#30
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
R5F1014PLAFB#30
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
R5F1013PLAFB#30
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
R5F101PLAFB#30 Rating Maksimal & Karakteristik Listrik
| Device Type | 16-bit microcontroller |
| Series | RL78/G13 |
| Maximum CPU Frequency | 32 MHz |
| Core Performance | 43.2 DMIPS at 32 MHz |
| Program Flash Memory | 512 KB (512K x 8) |
| RAM Memory | 32 KB |
| Tegangan Pemuat Kerja | 1.6 V to 5.5 V |
| CPU Operating Current | 66 µA/MHz |
| STOP Mode Current | 230 nA |
| Suhu Kerja | -40 °C to +85 °C |
| Paket | 100-LQFP (14 x 14 mm) |
| Tipe Mounting | Surface mount |
| On-Chip Oscillator | Yes |
| Data Flash | Yes |
| A/D Converter | Yes |
| Safety Feature | Illegal-operation detection function |
| Household Appliance Safety Support | Supports IEC/UL household-appliance safety requirements |
| Status RoHS | RoHS |
R5F101PLAFB#30 100-lqfp (14 x 14 mm) Diamant Konfigurasi Panduan
Konfigurasi pin untuk R5F101PLAFB#30 (100-lqfp (14 x 14 mm) pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk R5F101PLAFB#30.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
R5F101PLAFB#30 cocok untuk 6 aplikasis: Household Appliance Control, Industrial Sensor Interface, Battery-Powered Metering, Low-Power IoT Sensor Node, Digital Thermostat, Communication Controller.
Household Appliance Control
The R5F101PLAFB#30 fits appliance-control boards that combine user inputs, sensors, motors or heaters, and a low-power standby state. Its 16-bit RL78/G13 core operates up to 32 MHz for responsive control logic, while 512 KB flash accommodates application code and parameter data. The 230 nA STOP current is especially valuable in appliances that spend most of their operating life idle. Renesas identifies an illegal-operation detection function for household-appliance safety support. The design should still be reviewed against the applicable appliance standard, including isolation, thermal behavior, and functional-safety requirements.
Industrial Sensor Interface
The R5F101PLAFB#30 is suitable for compact sensor-interface modules that digitize analog inputs and apply control or communication logic. Its integrated A/D converter reduces external signal-conditioning requirements, while 512 KB of flash and 32 KB of RAM provide capacity for calibration tables, filtering, diagnostics, and protocol handling. The 1.6 V to 5.5 V operating range supports low-voltage embedded systems. At 32 MHz, the CPU reaches 43.2 DMIPS under the manufacturer's stated conditions, allowing useful processing headroom. For industrial deployment, verify the required operating temperature, EMC performance, isolation, and calibration strategy.
Battery-Powered Metering
The R5F101PLAFB#30 fits metering equipment where a numeric display or communications interface must coexist with long idle periods. Its 66 µA/MHz CPU consumption and 230 nA STOP-mode current help reduce average power in duty-cycled designs, while the 512 KB flash supports measurement routines and data structures. The 16-bit architecture is useful for arithmetic-heavy metering tasks without requiring a high-power processor. Engineer the system around sensor load, display consumption, regulator efficiency, and wake-up behavior because those factors usually dominate battery life. Confirm storage-retention and data-flash endurance requirements in the official documentation.
Low-Power IoT Sensor Node
The R5F101PLAFB#30 can serve as the local controller in a compact IoT sensor node that periodically samples inputs and wakes to transmit results. Its low-power STOP state supports long inactive intervals, and the integrated A/D converter handles common analog sensor inputs. With 32 KB RAM and 512 KB flash, the device can manage local filtering, thresholds, diagnostics, and communication routines. The package requires careful escape routing because the 100-LQFP footprint is larger than many minimalist IoT designs. Firmware selection must account for wake-up latency, peripheral standby behavior, radio duty cycle, and the power consumed by sensors and external transceivers.
Digital Thermostat
The R5F101PLAFB#30 is appropriate for a digital thermostat that measures temperature, drives a display or indicators, operates a relay or heater control stage, and maintains low standby consumption. The integrated A/D converter supports sensor acquisition, and the 32 MHz RL78/G13 core provides capacity for filtering, hysteresis, scheduling, and user-interface handling. The -40 °C to +85 °C listed range covers many ambient environments, although the complete component set must be checked for the same range. A safety-oriented design should include heater-stall detection, watchdog behavior, and independent thermal shutdown rather than relying solely on software.
Communication Controller
The R5F101PLAFB#30 can act as a protocol and control hub for an embedded communications module. The 43.2 DMIPS-class performance at 32 MHz supports framing, address management, buffering, and supervisory logic, while 512 KB flash provides room for protocol stacks and configuration data. Its 32 KB RAM is useful for packet buffers, although the final memory budget depends on the selected stack and buffering strategy. The 1.6 V to 5.5 V range facilitates integration with low-voltage transceivers. Confirm the exact USART, timer, and serial-interface resources in the pin table and RL78/G13 user documentation before assigning a communication architecture.
Data referensi engineering untuk R5F101PLAFB#30 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini |
|---|---|
| Brand | Renesas Electronics |
| Package | 100-LQFP (14 x 14 mm) |
| CPU Architecture | 16-bit RL78/G13 |
| Maximum Frequency | 32 MHz |
| Core Performance | 43.2 DMIPS at 32 MHz |
| Program Flash Memory | 512 KB (512K x 8) |
| RAM Memory | 32 KB |
| Operating Supply Voltage | 1.6 V to 5.5 V |
| CPU Operating Current | 66 µA/MHz |
| STOP Mode Current | 230 nA |
| Operating Temperature | -40 °C to +85 °C |
Diferensiator Kunci
- Combines a 32 MHz 16-bit core with low-power states (vsGeneral-purpose 32-bit MCU alternatives)
- Substantial embedded memory in one device (vsSmaller-memory RL78 microcontroller options)
- Integrated resources reduce board complexity (vsDiscrete-processor and separate-converter designs)
Catatan Desain
Design the supply network for the full 1.6 V to 5.5 V operating range and place the required input and decoupling capacitors close to the device pins according to the official electrical-characteristics and layout guidance. Pay particular attention to startup behavior when the supply is below the nominal operating region. If the system uses a switched source, verify that transients and ringing remain within the device's absolute maximum limits.
The 100-LQFP footprint has a fine lead pitch and requires a defined fanout from the board pads to the component lands. Follow the official package drawing for land dimensions, solder-mask clearance, and paste-aperture design. Check pin 1 orientation, exposed lead clearance, and assembly tolerances on the fabrication drawing. Do not substitute a 92-terminal or 100-terminal drawing without checking the actual package dimensions.
Avoid treating an RL78/G13 family member or a similarly named suffix as a drop-in replacement solely because its flash capacity appears similar. Confirm the terminal assignments, peripheral channels, ADC specifications, clock sources, memory map, and device identifier in the official documentation. Software migration also matters: interrupt vectors, timer channels, and library configuration must be reviewed before committing to a substitute.
Use STOP-mode current figures as a design input rather than a complete battery-life estimate. Actual average consumption also includes analog peripherals, sensor bias currents, external regulators, pull resistors, and any communications hardware. Estimate the operating duty cycle from the product's wake events, then size the energy source and regulator for both active peaks and the longest idle interval.
Informasi Konformitas
The LCSC product listing identifies the device as RoHS compliant. No verified AEC-Q100 qualification, REACH status, halogen-free declaration, or conflict-minerals declaration was provided.