Renesas Electronics

R5F101PLAFB#30 - 32MHz 512KB 16-Bit MCU | Renesas

MPN: R5F101PLAFB#30 ✓ Aktif
1.6 V to 5.5 V Vdss 66 µA/MHz Id 100-LQFP (14 x 14 mm) Package 32 MHz Speed 512 KB (512K x 8) Memory
MOQ: 1 |

R5F101PLAFB#30 Ringkasan

The Renesas Electronics R5F101PLAFB#30 is a 16-bit RL78/G13 microcontroller operating at up to 32 MHz, with 512 KB of flash memory and 32 KB of RAM, housed in a 100-LQFP (14 x 14 mm) package. The device is designed for low-power embedded control and provides an operating supply range of 1.6 V to 5.5 V with an ambient temperature range of -40 °C to +85 °C.

The RL78/G13 family is a microcontroller family combining a 16-bit CPU, flash program memory, data flash, on-chip oscillators, analog-to-digital conversion, and low-power operating modes. Its CPU consumes 66 µA/MHz, while STOP standby consumption is 230 nA. The manufacturer describes the family as delivering 43.2 DMIPS at 32 MHz, making it suitable for embedded systems that require efficient code execution without a high-power application processor.

Key features of the R5F101PLAFB#30 include 512 KB flash, 32 KB SRAM, a 32-bit CPU operating at 32 MHz, and a 100-LQFP package. The integrated analog and timing resources allow a compact design to handle sensing, control, communications, and local user-interface functions without requiring several external components. The RL78 architecture is commonly used in appliances, industrial equipment, meters, and other compact embedded-control products.

The low-power characteristics are important for battery-powered or intermittently powered equipment. The 230 nA STOP-mode current provides a low idle-state burden, while the 66 µA/MHz operating specification supports applications in which the duty cycle of active processing is limited. The device also includes built-in safety functions for detecting illegal hardware operation, as described by Renesas for household-appliance safety applications.

Use the manufacturer datasheet and the RL78/G13 user’s manual for the complete peripheral list, electrical limits, clock configuration, and programming instructions. Confirm the exact 100-LQFP footprint and pin assignments before layout, especially because the product is also described in distributor listings as 100-LFQFP. Decoupling, programming, and clock requirements should be implemented according to the device's official application guidance.

This product page combines the manufacturer part characteristics, verified distributor listings, and practical guidance for evaluating the R5F101PLAFB#30 in low-power embedded systems. It highlights the part's 32 MHz processing capability, 512 KB flash, 32 KB RAM, 1.6 V to 5.5 V supply range, and low-power operating modes.

Pilihan pengganti yang segera untuk R5F101PLAFB#30 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

R5F101PLAFB#V0

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 100-LQFP (14x14 mm)
Same 32 MHz maximum frequency, 512 KB flash class, 1.6 V to 5.5 V class, and 100-LQFP footprint; suffix-specific commercial and qualification terms differ by .

📋 Alternatif rujukan (tidak dalam katalog)

R5F1016PLAFB#30

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 100-LQFP (14x14 mm)
Same 32 MHz CPU, 1.6 V to 5.5 V supply class, and 100-LQFP footprint; flash-density difference is 0 KB versus the 512 KB target configuration.

📋 Alternatif rujukan (tidak dalam katalog)

R5F1015PLAFB#30

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 100-LQFP (14x14 mm)
Same 32 MHz CPU, 1.6 V to 5.5 V supply class, and 100-LQFP footprint; flash is 256 KB, 256 KB lower than the 512 KB target.

📋 Alternatif rujukan (tidak dalam katalog)

R5F1014PLAFB#30

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 100-LQFP (14x14 mm)
Same 32 MHz CPU, 1.6 V to 5.5 V supply class, and 100-LQFP footprint; flash is 128 KB, 384 KB lower than the 512 KB target.

📋 Alternatif rujukan (tidak dalam katalog)

R5F1013PLAFB#30

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 100-LQFP (14x14 mm)
Same 32 MHz CPU, 1.6 V to 5.5 V supply class, and 100-LQFP footprint; flash is 64 KB, 448 KB lower than the 512 KB target.

📋 Alternatif rujukan (tidak dalam katalog)

R5F101PLAFB#30 Penilaian maksimum & Ciri-ciri Elektrik

Device Type 16-bit microcontroller
Series RL78/G13
Maximum CPU Frequency 32 MHz
Core Performance 43.2 DMIPS at 32 MHz
Program Flash Memory 512 KB (512K x 8)
RAM Memory 32 KB
Tegangan Pemberi Arus Operasi 1.6 V to 5.5 V
CPU Operating Current 66 µA/MHz
STOP Mode Current 230 nA
Suhu Operasi -40 °C to +85 °C
Kemasan 100-LQFP (14 x 14 mm)
Jenis Pemasangan Surface mount
On-Chip Oscillator Yes
Data Flash Yes
A/D Converter Yes
Safety Feature Illegal-operation detection function
Household Appliance Safety Support Supports IEC/UL household-appliance safety requirements
Status RoHS RoHS

Panduan Konfigurasi Pin R5F101PLAFB#30 100-lqfp (14 x 14 mm)

Konfigurasi pin untuk R5F101PLAFB#30 (100-lqfp (14 x 14 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 100-lqfp (14 x 14 mm) untuk R5F101PLAFB#30

Tiada data garisan pin yang diperoleh untuk R5F101PLAFB#30.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

R5F101PLAFB#30 patut untuk 6 aplikasis: Household Appliance Control, Industrial Sensor Interface, Battery-Powered Metering, Low-Power IoT Sensor Node, Digital Thermostat, Communication Controller.

🔧

Household Appliance Control

The R5F101PLAFB#30 fits appliance-control boards that combine user inputs, sensors, motors or heaters, and a low-power standby state. Its 16-bit RL78/G13 core operates up to 32 MHz for responsive control logic, while 512 KB flash accommodates application code and parameter data. The 230 nA STOP current is especially valuable in appliances that spend most of their operating life idle. Renesas identifies an illegal-operation detection function for household-appliance safety support. The design should still be reviewed against the applicable appliance standard, including isolation, thermal behavior, and functional-safety requirements.

🏭

Industrial Sensor Interface

The R5F101PLAFB#30 is suitable for compact sensor-interface modules that digitize analog inputs and apply control or communication logic. Its integrated A/D converter reduces external signal-conditioning requirements, while 512 KB of flash and 32 KB of RAM provide capacity for calibration tables, filtering, diagnostics, and protocol handling. The 1.6 V to 5.5 V operating range supports low-voltage embedded systems. At 32 MHz, the CPU reaches 43.2 DMIPS under the manufacturer's stated conditions, allowing useful processing headroom. For industrial deployment, verify the required operating temperature, EMC performance, isolation, and calibration strategy.

🔋

Battery-Powered Metering

The R5F101PLAFB#30 fits metering equipment where a numeric display or communications interface must coexist with long idle periods. Its 66 µA/MHz CPU consumption and 230 nA STOP-mode current help reduce average power in duty-cycled designs, while the 512 KB flash supports measurement routines and data structures. The 16-bit architecture is useful for arithmetic-heavy metering tasks without requiring a high-power processor. Engineer the system around sensor load, display consumption, regulator efficiency, and wake-up behavior because those factors usually dominate battery life. Confirm storage-retention and data-flash endurance requirements in the official documentation.

🧩

Low-Power IoT Sensor Node

The R5F101PLAFB#30 can serve as the local controller in a compact IoT sensor node that periodically samples inputs and wakes to transmit results. Its low-power STOP state supports long inactive intervals, and the integrated A/D converter handles common analog sensor inputs. With 32 KB RAM and 512 KB flash, the device can manage local filtering, thresholds, diagnostics, and communication routines. The package requires careful escape routing because the 100-LQFP footprint is larger than many minimalist IoT designs. Firmware selection must account for wake-up latency, peripheral standby behavior, radio duty cycle, and the power consumed by sensors and external transceivers.

🌡️

Digital Thermostat

The R5F101PLAFB#30 is appropriate for a digital thermostat that measures temperature, drives a display or indicators, operates a relay or heater control stage, and maintains low standby consumption. The integrated A/D converter supports sensor acquisition, and the 32 MHz RL78/G13 core provides capacity for filtering, hysteresis, scheduling, and user-interface handling. The -40 °C to +85 °C listed range covers many ambient environments, although the complete component set must be checked for the same range. A safety-oriented design should include heater-stall detection, watchdog behavior, and independent thermal shutdown rather than relying solely on software.

🌐

Communication Controller

The R5F101PLAFB#30 can act as a protocol and control hub for an embedded communications module. The 43.2 DMIPS-class performance at 32 MHz supports framing, address management, buffering, and supervisory logic, while 512 KB flash provides room for protocol stacks and configuration data. Its 32 KB RAM is useful for packet buffers, although the final memory budget depends on the selected stack and buffering strategy. The 1.6 V to 5.5 V range facilitates integration with low-voltage transceivers. Confirm the exact USART, timer, and serial-interface resources in the pin table and RL78/G13 user documentation before assigning a communication architecture.

What is the R5F101PLAFB#30?
The R5F101PLAFB#30 is a Renesas Electronics 16-bit RL78/G13 microcontroller rated up to 32 MHz, with 512 KB of flash memory, 32 KB of RAM, and a 100-LQFP package. According to the Renesas RL78/G13 product information, the device combines an on-chip oscillator, data flash, an A/D converter, and low-power operating modes for compact embedded-control designs.
What is the operating voltage of R5F101PLAFB#30?
The R5F101PLAFB#30 operates from 1.6 V to 5.5 V. Renesas identifies the part as a low-power RL78/G13 MCU, and the LCSC technical listing confirms the 1.6 V to 5.5 V supply range. Keep the regulator design and all peripheral connections within this range, and use the manufacturer electrical-characteristics table when designing for temperature, conversion, and I/O limits.
How much flash and RAM does R5F101PLAFB#30 have?
The R5F101PLAFB#30 has 512 KB of flash memory organized as 512K x 8 and 32 KB of RAM. The 512 KB program-memory figure appears in the DigiKey and Mouser listings, while the 32 KB SRAM figure appears in the LCSC product record. This combination supports moderate embedded applications that need more code space than a small entry-level MCU but do not require an external memory interface.
What is the maximum clock frequency of R5F101PLAFB#30?
The R5F101PLAFB#30 runs at up to 32 MHz and delivers 43.2 DMIPS according to the Renesas RL78/G13 product page. This performance supports responsive control loops, sensor acquisition, communications handling, and appliance-control logic. Actual operating performance depends on the configured clock, peripherals, flash wait-state settings, voltage, and workload.
Where can I download the R5F101PLAFB#30 datasheet?
The official R5F101PLAFB#30 product information is available on the Renesas Electronics RL78/G13 part-details page. The manufacturer part page is the preferred starting point for the datasheet, programming information, and related technical documents. Use the pin-description table, electrical-characteristics section, and memory map from the official documentation when assigning PCB tracks and designing firmware.
Where can I find the R5F101PLAFB#30 pinout?
The R5F101PLAFB#30 pin assignments are defined in the pin-description table of the official Renesas RL78/G13 documentation. The part is listed in a 100-LQFP package, so verify all 100 terminal assignments directly against the package drawing before fabrication. Do not infer pin functions from a different density, package, or suffix because lead assignments can vary.
What can replace the R5F101PLAFB#30?
No verified pin-to-pin replacement for the R5F101PLAFB#30 was identified in the available cross-reference results. Renesas offers a component cross-reference tool, but a candidate should be accepted only after its exact package, pin assignment, memory map, voltage range, clock architecture, peripheral set, and software compatibility have been checked. A different RL78 family member should not be treated as drop-in without that review.
Is R5F101PLAFB#30 suitable for battery-powered devices?
The R5F101PLAFB#30 is suitable for low-power embedded designs because Renesas specifies 66 µA/MHz CPU consumption and 230 nA in STOP mode. These figures make it especially useful in appliances, meters, and sensing equipment that spend substantial time idle. Actual battery life also depends on the active duty cycle, sensor loads, regulator efficiency, wake-up frequency, and board leakage.
What is the difference between R5F101PLAFB#30 and R5F101PLAFB#V0?
The exact functional difference between R5F101PLAFB#30 and R5F101PLAFB#V0 is not established by the available manufacturer information. The suffix typically encodes orderable product conditions, but that interpretation is not sufficient for a drop-in decision. Compare the ordering table, temperature grade, qualification status, firmware identifiers, and any lot-specific notices in the official datasheet before substituting one suffix for the other.
When should I choose R5F101PLAFB#30 over another RL78/G13 option?
Choose the R5F101PLAFB#30 when a design needs a 16-bit RL78/G13 core at up to 32 MHz with 512 KB flash, 32 KB RAM, and a 100-LQFP footprint. It is particularly relevant when low active current, 230 nA STOP consumption, and integrated sensing resources matter. Select another family member instead if its package, memory size, temperature grade, qualification, or peripheral set better matches the product requirements.
Is R5F101PLAFB#30 suitable for industrial control applications?
The R5F101PLAFB#30 is suitable for many embedded industrial-control tasks because it provides 32 MHz performance, 512 KB flash, 32 KB RAM, an A/D converter, and an operating temperature range of -40 °C to +85 °C. Final suitability depends on the required qualification, isolation, EMC environment, long-term supply expectations, and peripheral coverage. The listed temperature range alone does not establish compliance with a specific industrial safety standard.
What programming information is needed for R5F101PLAFB#30?
Programming the R5F101PLAFB#30 requires the RL78/G13 hardware and software toolchain, the correct device support file, and the electrical and pin information in the official Renesas documentation. The R5F110NJGLA#U0 is listed as a Renesas-family companion candidate for related debugger or programming environments, but its exact interface compatibility must be confirmed before selection. Never apply programming signals without checking voltage levels and dedicated pins.
Where can I buy R5F101PLAFB#30 and what is its lead time?
Use the Request a Quote form on this page to ask about R5F101PLAFB#30 availability, order quantity, packaging, and current lead time. Distributor listings show an active product and general ordering information, but they do not provide a confirmed stock allocation or contractual lead time for a specific order. The procurement team can confirm the exact suffix, package, quantity, and delivery schedule through the quote request.
How much does R5F101PLAFB#30 cost?
The current commercial terms for R5F101PLAFB#30 are handled through the Request a Quote form on this page. The price depends on order quantity, package, purchase volume, and current supplier conditions. Use the form to request a current quotation rather than relying on a historical or unrepresentative listing amount.
What are the key specifications of R5F101PLAFB#30 that engineers should know?
The key R5F101PLAFB#30 specifications are a 16-bit RL78/G13 core, 32 MHz maximum operating frequency, 512 KB flash, 32 KB RAM, 1.6 V to 5.5 V supply range, and a -40 °C to +85 °C ambient temperature range. Renesas also specifies 43.2 DMIPS, 66 µA/MHz CPU consumption, and 230 nA STOP current. The device includes an on-chip oscillator, data flash, and an A/D converter.
What is the best equivalent MCU for R5F101PLAFB#30?
No cross-brand equivalent can be identified responsibly from the available results because no candidate was confirmed as pin-to-pin compatible with the 100-LQFP R5F101PLAFB#30. A valid replacement would require the same 100-terminal footprint, compatible supply voltage, equivalent memory resources, matching peripheral assignments, and a practical migration path for RL78 firmware. Use the Renesas cross-reference tool, then verify the selected part against the official datasheets.

Data referensi kejuruteraan untuk R5F101PLAFB#30 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the R5F101PLAFB#30 when the design benefits from the RL78/G13 ecosystem, a 16-bit CPU operating at 32 MHz, 512 KB flash, 32 KB RAM, and very low STOP-mode consumption. It is a strong fit for appliances, metering equipment, compact controllers, and sensor nodes that need integrated analog conversion without a large application processor. Confirm that the 100-LQFP footprint is acceptable, that the -40 °C to +85 °C range covers the product environment, and that the available peripherals meet the design requirements. No verified drop-in replacement was established for this exact ordering code. An alternative should therefore be selected only after matching the pinout, voltage range, memory resources, peripheral functions, qualification status, and firmware migration requirements. For lower-cost or smaller designs, choose another RL78/G13 density or package after confirming the required memory, I/O, and analog channels.

Perbandingan dengan Gantian

Parametr Produk Ini
Brand Renesas Electronics
Package 100-LQFP (14 x 14 mm)
CPU Architecture 16-bit RL78/G13
Maximum Frequency 32 MHz
Core Performance 43.2 DMIPS at 32 MHz
Program Flash Memory 512 KB (512K x 8)
RAM Memory 32 KB
Operating Supply Voltage 1.6 V to 5.5 V
CPU Operating Current 66 µA/MHz
STOP Mode Current 230 nA
Operating Temperature -40 °C to +85 °C

Penyeberangsung Jelas

  • Combines a 32 MHz 16-bit core with low-power states (vsGeneral-purpose 32-bit MCU alternatives)
  • Substantial embedded memory in one device (vsSmaller-memory RL78 microcontroller options)
  • Integrated resources reduce board complexity (vsDiscrete-processor and separate-converter designs)

Catatan Desain

Design the supply network for the full 1.6 V to 5.5 V operating range and place the required input and decoupling capacitors close to the device pins according to the official electrical-characteristics and layout guidance. Pay particular attention to startup behavior when the supply is below the nominal operating region. If the system uses a switched source, verify that transients and ringing remain within the device's absolute maximum limits.

The 100-LQFP footprint has a fine lead pitch and requires a defined fanout from the board pads to the component lands. Follow the official package drawing for land dimensions, solder-mask clearance, and paste-aperture design. Check pin 1 orientation, exposed lead clearance, and assembly tolerances on the fabrication drawing. Do not substitute a 92-terminal or 100-terminal drawing without checking the actual package dimensions.

Avoid treating an RL78/G13 family member or a similarly named suffix as a drop-in replacement solely because its flash capacity appears similar. Confirm the terminal assignments, peripheral channels, ADC specifications, clock sources, memory map, and device identifier in the official documentation. Software migration also matters: interrupt vectors, timer channels, and library configuration must be reviewed before committing to a substitute.

Use STOP-mode current figures as a design input rather than a complete battery-life estimate. Actual average consumption also includes analog peripherals, sensor bias currents, external regulators, pull resistors, and any communications hardware. Estimate the operating duty cycle from the product's wake events, then size the energy source and regulator for both active peaks and the longest idle interval.

Maklumat Kesediaan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The LCSC product listing identifies the device as RoHS compliant. No verified AEC-Q100 qualification, REACH status, halogen-free declaration, or conflict-minerals declaration was provided.

Data disahkan pada: 2026-11-10 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

R5F101PLAFB#30 datasheet R5F101PLAFB#30 specifications R5F101PLAFB#30 pinout R5F101PLAFB#30 datasheet pdf Renesas R5F101PLAFB#30 R5F101PLAFB#30 equivalent R5F101PLAFB#30 replacement R5F101PLAFB#30 cross reference R5F101PLAFB#30 LQFP-100 footprint R5F101PLAFB#30 application circuit R5F101PLAFB#30 price R5F101PLAFB#30 stock RL78 G13 32MHz 512KB MCU R5F101PLAFB#30 programming

Komponen dan Tanda berkaitan

Renesas Electronics R5F101PLAFB#30 RL78/G13 16-bit microcontroller microcontroller unit MCU embedded controller semiconductor 32 MHz 43.2 DMIPS 512 KB flash 32 KB RAM data flash A/D converter on-chip oscillator STOP mode 66 µA/MHz 230 nA 1.6 V to 5.5 V 100-LQFP LQFP package family surface mount SMD IEC UL RoHS R5F110NJGLA#U0
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ