Skyworks Solutions

SI3211-E-FT Single-Channel SLIC/CODEC | Skyworks

MPN: SI3211-E-FT ✗ Akhir Hidup
3.3 V or 5 V Vdss 41 mA Id 38-pin TFSOP Package
MOQ: 1 |

SI3211-E-FT Ringkasan

Skyworks Solutions SI3211-E-FT is a single-channel Subscriber Line Interface Concept, or SLIC, codec with integrated DTMF decoding capability. The device operates from a 3.3 V or 5 V supply, draws approximately 41 mA, and provides a 60 dB voice-channel gain characteristic in a 38-pin thin TSSOP surface-mount package. Its integration combines the subscriber-line interface and codec functions needed in analog telephone and voice-over-data equipment.

A SLIC is an integrated circuit that forms the analog voice-channel interface between a telephone line and a digital voice-processing system. Within the telecommunications hierarchy, a SLIC sits below the broader telecom interface IC category and combines line-driving, line-sense, codec, and tone-decoding functions. This integration reduces the number of separate components required in a voice terminal while providing a defined interface for digitized voice traffic.

The principal identified characteristics include one analog voice channel, 60 dB gain, approximately 41 mA operating current, and operation from either 3.3 V or 5 V. The part also includes a DTMF decoder, allowing multifrequency telephone signaling to be recovered in the same signal-processing path. These features suit compact telephone interfaces, analog handsets, customer-premises equipment, and other designs requiring a dedicated single-channel line interface.

The 38-pin TFSOP package is designed for surface mounting and provides the physical interface for analog line connections, digital voice data, control signaling, power, and clocking. Because the SI3211-E-FT belongs to a legacy telecom-interface product family, engineers should confirm that its electrical characteristics, acoustic performance, line impedance requirements, and operating limits satisfy the current telephone-network design before releasing a new production design.

Typical uses include analog handsets, private branch exchanges, voice terminal adapters, subscriber-line test equipment, and voice-access systems. In these systems, the SLIC can connect the physical voice pair to a digital voice codec controller while handling DTMF signaling. The single-channel architecture is appropriate when one telephone line is sufficient, whereas multi-line equipment may require a channel-per-line solution or another interface strategy.

Layout should preserve the separation between sensitive analog line nodes and digital, clock, and supply traces. Decoupling, grounding, and controlled return paths remain essential because line-driver switching and codec processing can couple noise into the voice channel. Before schematic release, verify the recommended capacitor values, clock source, digital interface timing, hook-switch arrangement, and power-supply tolerances against the manufacturer datasheet.

This product record combines the SI3211-E-FT electrical identity, package information, sourcing structure, replacement analysis, and practical telecom-interface guidance. It also distinguishes the directly comparable SI3211-KT from unsupported cross-package substitutes, helping engineers make a package-aware decision before committing a design.

Alternatif penggantian untuk SI3211-E-FT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian SI3211-E-FT (sama faktor bentuk dan footprint) — berbeda di dalam Supply Voltage.

Silicon Labs
Supply Voltage: 5 V
Bandingkan dengan SI3211-E-FT →

SI3211-KT

✅ Drop-In
Silicon Labs
📦 38-pin TFSOP
Programmable CMOS SLIC/codec · 1 channel · 38 terminals · 38 pins · 5 V · Commercial · TSSOP · Gull wing

Kontak untuk harga

Lihat Datasheet →

SI3211-E-FT Spesifikasi

Product Type Subscriber Line Interface Concept (SLIC) codec with DTMF decoder
Channel Count 1 channel
Tegangan Pemuat 3.3 V or 5 V
Operating Current 41 mA
Voice Channel Gain 60 dB
DTMF Decoder Integrated
Paket 38-pin TFSOP
Package Dimensions 0.173 in (4.40 mm) width
Tipe Mounting Surface Mount
Power Rating 700 mW
Integrated Circuit Category Telecom interface IC
Manufacturer Skyworks Solutions
Status Lingkungan Hidup Not for new designs

SI3211-E-FT 0.173 in (4.40 mm) width Diamant Konfigurasi Panduan

Konfigurasi pin untuk SI3211-E-FT (0.173 in (4.40 mm) width pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 0.173 in (4.40 mm) width untuk SI3211-E-FT

Tidak ada data diatribut pin yang tersedia untuk SI3211-E-FT.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

SI3211-E-FT cocok untuk 6 aplikasis: Analog Telephone Handset Interface, Customer Premises Equipment, Private Branch Exchange Line Card, Voice-over-PoP Terminal, Telephone Line Test Equipment, Industrial Voice Terminal.

📱

Analog Telephone Handset Interface

The SI3211-E-FT fits a single-line analog handset because it integrates the subscriber-line interface, codec, and DTMF decoder into one 38-pin TFSOP device. Its 60 dB voice-channel gain characteristic and approximately 41 mA operating current support a compact, power-conscious voice path, while operation from 3.3 V or 5 V provides flexibility in portable and desktop telephone architectures. Place the device near the line-network components, keep analog line routing away from digital traces, and use the manufacturer reference circuit for bypass capacitors, hook-state sensing, and gain configuration. Validate microphone and earpiece levels, line impedance, DTMF sensitivity, and codec timing in the complete handset rather than judging performance from component specifications alone.

🌐

Customer Premises Equipment

The SI3211-E-FT can provide the single subscriber-line voice interface in customer-premises equipment that terminates one analog line and passes digitized voice data to a system controller. The 38-pin TFSOP package keeps the line, codec, and DTMF functions in a compact surface-mount implementation, and the 3.3 V or 5 V supply options support both legacy and newer controller rails. The approximately 41 mA operating current is particularly relevant to compact CPE designs with limited thermal capacity. Confirm the external line-network values and system clocking against the datasheet, and keep high-level switching nodes away from the voice input to reduce channel noise and false DTMF detections.

🏭

Private Branch Exchange Line Card

A private branch exchange line card can use the SI3211-E-FT when each subscriber port requires an independent single-channel analog interface. Its integrated codec and DTMF decoder reduce the external component count around each line, while the 60 dB gain characteristic provides a defined starting point for voice-path calibration. Deploy one SI3211-E-FT per analog line, keep the high-voltage line-side network isolated from sensitive codec traces, and provide local decoupling for each device. Because this is a legacy interface IC, verify line-side protection, ringing behavior, maximum loop current, and thermal performance over the full product temperature range before approving the card for new deployments.

🖥️

Voice-over-PoP Terminal

The SI3211-E-FT is applicable to a voice-over-PoP terminal that bridges an analog telephone line with packetized voice. The SLIC handles the physical subscriber-line connection, the codec produces digital voice samples, and the DTMF decoder exposes multifrequency signaling for call-control software. Its 3.3 V or 5 V operation can simplify integration with either a legacy telephone interface processor or a lower-voltage embedded controller. Use controlled return paths and separated analog and digital routing to prevent line-driver energy from corrupting the voice samples. System validation should cover echo behavior, line-impedance variation, codec clock synchronization, DTMF detection under noise, and continuity during packet-network interruption.

🔧

Telephone Line Test Equipment

The SI3211-E-FT can serve as the line-facing element in compact telephone-line test equipment because it combines voice-path conversion and DTMF recognition in a single package. A test set or line simulator can use the codec for speech-path measurements and the decoder to evaluate multifrequency signaling at the subscriber interface. The 38-pin TFSOP package supports compact, automated test hardware, and the 60 dB gain characteristic provides a useful reference point when calculating stimulus levels. Keep the device isolated from test-fixture transients and provide the specified protection networks. Validate accuracy against representative line impedances and account for temperature, codec delay, DTMF timing tolerances, and not-for-new-designs supply constraints.

🏭

Industrial Voice Terminal

An industrial voice terminal can use the SI3211-E-FT when it must support one analog telephone line, local call signaling, and a compact embedded control system. The integrated DTMF decoder reduces the need for a separate signaling receiver, while the single-channel SLIC/codec arrangement suits equipment where each terminal serves one line. Its approximately 41 mA operating current helps constrain power demand, and the 3.3 V or 5 V flexibility supports multiple industrial controller platforms. Design the printed-board layout with separate analog and digital ground-current paths, place line-network and bypass components close to the device, and avoid routing switching-regulator traces beneath the voice input. Qualification should include conducted noise, temperature cycling, surge exposure, and the expected telephone-line voltage range.

What is the SI3211-E-FT?
The SI3211-E-FT is a single-channel Subscriber Line Interface Concept codec with an integrated DTMF decoder. According to the manufacturer datasheet information, it combines the analog telephone-line interface and codec functions in a 38-pin TFSOP package, operating from 3.3 V or 5 V while drawing approximately 41 mA. It is intended for compact analog voice and subscriber-line equipment.
What are the key specifications of SI3211-E-FT that engineers should know?
The SI3211-E-FT provides one voice channel, a 60 dB voice-channel gain characteristic, approximately 41 mA operating current, and 3.3 V or 5 V operation. The manufacturer device description identifies a 38-pin TFSOP package, surface mounting, and a 700 mW power rating. Its integrated DTMF decoder supports telephone-signaling recovery, while detailed timing, temperature, and line-performance limits should be confirmed in the datasheet.
Where can I download the SI3211-E-FT datasheet PDF?
The SI3211-E-FT datasheet PDF is available through the product document linked on this page. Use the manufacturer document to verify pin assignments, line-interface characteristics, application circuitry, external component values, clock requirements, and absolute maximum ratings. The downloadable document should be used for new engineering work because the device is listed as not for new designs.
Where can I find the SI3211-E-FT pinout?
The SI3211-E-FT pinout is shown in the device datasheet and package documentation for the 38-pin TFSOP arrangement. Use its pin-description table when assigning line-driver, codec, control, clock, supply, and ground connections. The 38-pin package is not represented by one of the standard compact package diagrams in this record, so follow the physical pin numbering printed in the manufacturer document rather than relying on a generic drawing.
What is the difference between SI3211-E-FT and SI3211-KT?
The SI3211-KT is the closest documented alternative because it uses the same 38-pin TFSOP package, operates from 5 V, and has the same listed 700 mW power rating. The available comparison data does not establish every functional or timing parameter as identical, so qualification should include line impedance, codec timing, DTMF behavior, control signaling, and thermal verification. Both parts share the same physical package, but package similarity alone does not authorize an uncontrolled substitution.
Can SI3211-KT replace SI3211-E-FT in an existing design?
SI3211-KT is a package-compatible candidate for SI3211-E-FT because both use a 38-pin TFSOP and share the listed 5 V supply and 700 mW power rating. Before replacing the component, compare the two datasheets for pin functions, digital-interface timing, DC-DC converter behavior, line-drive levels, DTMF decoding, operating temperature, and external component values. A schematic change may be necessary if any of those functions differ.
What can replace SI3211-E-FT?
SI3211-KT is the only directly comparable drop-in candidate identified for the SI3211-E-FT because both use a 38-pin TFSOP package and share the listed 5 V supply and 700 mW power rating. No cross-brand equivalent with documented pin compatibility was found. Treat SI3211-KT as a qualified replacement candidate rather than an automatic substitution, and verify all pin and functional requirements against the manufacturer datasheets.
When should I choose SI3211-E-FT over SI3211-KT?
Choose SI3211-E-FT when an existing design has already validated its 3.3 V or 5 V operation, approximately 41 mA current, 60 dB voice-channel gain, integrated DTMF decoding, and external application circuitry. Choose SI3211-KT when its datasheet confirms every required signal and timing function in the available footprint. For new designs, evaluate whether a not-for-new-designs product is appropriate for the required service life.
Is SI3211-E-FT suitable for analog handsets and telephone interfaces?
The SI3211-E-FT is suitable for single-line analog voice interfaces because it combines a Subscriber Line Interface Concept, codec, and DTMF decoder in one 38-pin TFSOP. Its 60 dB gain characteristic, 3.3 V or 5 V supply flexibility, and approximately 41 mA current suit compact telephone designs. Final suitability depends on meeting line impedance, drive-level, ringing, codec-timing, and handset-acoustic requirements.
Where can I buy SI3211-E-FT online?
Use the Request a Quote form on this page to request SI3211-E-FT availability, current unit pricing, and lead time. The part is a legacy telecom-interface IC and may be constrained by lifecycle status and remaining inventory, so confirm the exact suffix, package, and delivery configuration before placing an order. A quotation also allows the requested quantity and packaging needs to be reviewed together.
What is the price of SI3211-E-FT?
The current price of SI3211-E-FT is presented through the Request a Quote form on this page. Because the device is listed as not for new designs, pricing and inventory can vary with remaining stock, volume, packaging configuration, and delivery schedule. Submit the required quantity and target shipment information to obtain a current quotation for the exact SI3211-E-FT suffix.
What is the lead time for SI3211-E-FT?
The current lead time for SI3211-E-FT should be confirmed through the Request a Quote form on this page. Lead time depends on remaining manufacturer or channel inventory, the ordered quantity, and the approved delivery packaging. The exact part is a 38-pin TFSOP device, so do not approve an equivalent or reel-coded suffix without confirming that its package and electrical requirements are acceptable.
Is SI3211-E-FT in stock?
The SI3211-E-FT is advertised as in stock by a participating distributor listing, but quantity and delivery should be confirmed through the Request a Quote form on this page. Legacy telecom IC availability can change quickly, and a listing's inventory indication does not guarantee the amount available for a specific order. Include the required quantity and ship-to region in the quotation request.
Is SI3211-E-FT still active for new designs?
The SI3211-E-FT is listed as not for new designs, so it should not be treated as an unrestricted active lifecycle component. It can remain appropriate for repair, continuation, or previously validated production programs when supply and long-term support requirements are acceptable. For a new telephone product, assess the not-for-new-designs restriction together with long-term supply, lifecycle, and qualification risks.
What design details matter when laying out SI3211-E-FT?
Keep sensitive analog line traces away from digital, clock, switching, and supply paths, and provide a low-impedance return for each section of the device. Place the required bypass and line-network components close to their associated pins, then control ground currents around the codec and line-driver circuits. Exact trace geometry, grounding topology, and component values should follow the reference circuit and layout guidance in the manufacturer datasheet.

Data referensi engineering untuk SI3211-E-FT — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose SI3211-E-FT for an already validated single-line voice design or a continuation program that specifically needs its documented 3.3 V or 5 V operation, approximately 41 mA current, 60 dB channel gain, integrated DTMF decoder, and 38-pin TFSOP footprint. Because the device is listed as not for new designs, assess lifecycle and supply risk before beginning a new product. Consider SI3211-KT when it meets the required line, codec, timing, and DTMF functions because it shares the same 38-pin TFSOP package, 5 V supply, and 700 mW power rating. No documented cross-brand drop-in substitute was identified, so avoid selecting an unrelated telecom-interface IC solely because it uses a similar package. For new multi-channel or long-life products, compare this legacy SLIC with current telecom-interface architectures, component availability, software support, and thermal requirements.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini SI3211-KT
Brand Skyworks Solutions Silicon Laboratories
Package 38-pin TFSOP 38-pin TFSOP
Supply Voltage 3.3 V or 5 V 5 V
Power Rating 700 mW 700 mW
Mounting Style Surface Mount Surface Mount

Diferensiator Kunci

  • Broader documented supply-voltage choice (vsSI3211-KT)
  • Documented operating-current figure (vsSI3211-KT)
  • Defined single-channel gain characteristic (vsSI3211-KT)

Catatan Desain

Separate the subscriber-line and voice-input routing from digital data, clock, and switching-supply traces. Keep the external line-network components close to their corresponding device pins, and route analog and digital returns so line-driver and codec currents do not share narrow paths. Use the manufacturer reference layout as the basis for trace geometry, via placement, ground regions, and exposed pad or thermal-via treatment.

Follow the manufacturer guidance for supply bypassing, voltage tolerance, startup, and power sequencing. The SI3211-E-FT supports 3.3 V or 5 V operation, but the selected rail must satisfy the operating limits, ripple requirements, and load conditions for the complete telephone interface. Place high-frequency bypass capacitors at the device and provide adequate local return paths before evaluating the board-level supply network.

Do not treat a matching 38-pin TFSOP outline as proof of complete replacement. Verify pin names, analog levels, codec timing, DTMF behavior, line-drive capability, clocking, external component values, and operating-temperature limits between the original and candidate devices. The SI3211-KT is a package-compatible candidate, but production substitution requires a controlled engineering review and suitable equipment.

Treat the analog line interface as a high-energy, high-impedance environment relative to the codec circuitry. Keep switching nodes and inductors away from voice inputs, minimize loop area in sensitive returns, and confirm filtering at the external line network. Evaluate DTMF immunity and voice noise with the complete phone line, protection network, chassis, and system power supply because board-only measurements may miss conducted disturbances.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The SI3211-E-FT is a legacy telecom-interface IC and is listed as not for new designs. A distributor page includes a RoHS field, but the actual status text is not populated in the available product information.

Data disahkan pada: 2026-11-20 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

SI3211-E-FT datasheet SI3211-E-FT pinout SI3211-E-FT datasheet pdf SI3211-E-FT equivalent SI3211-E-FT replacement SI3211-E-FT cross reference SI3211-E-FT vs SI3211-KT SI3211-E-FT price SI3211-E-FT stock Skyworks SI3211-E-FT SI3211-E-FT 38-TSSOP SI3211-E-FT analog handset SI3211-E-FT SLIC codec SI3211-E-FT DTMF decoder

Komponen dan Istilah Terkait

Skyworks Solutions SI3211-E-FT SI3211-KT Silicon Laboratories Subscriber Line Interface Concept SLIC codec DTMF decoder telecom interface IC integrated circuit semiconductor single-channel voice interface 38-pin TFSOP TSSOP family surface mount SMD 3.3 V power supply 5 V power supply 41 mA operating current 60 dB voice-channel gain analog handset customer premises equipment private branch exchange voice-over-PoP DTMF signaling
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ