SI3211-E-FT Single-Channel SLIC/CODEC | Skyworks
MPN: SI3211-E-FT ✗ Cuối đờiSI3211-E-FT Tóm tắt
A SLIC is an integrated circuit that forms the analog voice-channel interface between a telephone line and a digital voice-processing system. Within the telecommunications hierarchy, a SLIC sits below the broader telecom interface IC category and combines line-driving, line-sense, codec, and tone-decoding functions. This integration reduces the number of separate components required in a voice terminal while providing a defined interface for digitized voice traffic.
The principal identified characteristics include one analog voice channel, 60 dB gain, approximately 41 mA operating current, and operation from either 3.3 V or 5 V. The part also includes a DTMF decoder, allowing multifrequency telephone signaling to be recovered in the same signal-processing path. These features suit compact telephone interfaces, analog handsets, customer-premises equipment, and other designs requiring a dedicated single-channel line interface.
The 38-pin TFSOP package is designed for surface mounting and provides the physical interface for analog line connections, digital voice data, control signaling, power, and clocking. Because the SI3211-E-FT belongs to a legacy telecom-interface product family, engineers should confirm that its electrical characteristics, acoustic performance, line impedance requirements, and operating limits satisfy the current telephone-network design before releasing a new production design.
Typical uses include analog handsets, private branch exchanges, voice terminal adapters, subscriber-line test equipment, and voice-access systems. In these systems, the SLIC can connect the physical voice pair to a digital voice codec controller while handling DTMF signaling. The single-channel architecture is appropriate when one telephone line is sufficient, whereas multi-line equipment may require a channel-per-line solution or another interface strategy.
Layout should preserve the separation between sensitive analog line nodes and digital, clock, and supply traces. Decoupling, grounding, and controlled return paths remain essential because line-driver switching and codec processing can couple noise into the voice channel. Before schematic release, verify the recommended capacitor values, clock source, digital interface timing, hook-switch arrangement, and power-supply tolerances against the manufacturer datasheet.
This product record combines the SI3211-E-FT electrical identity, package information, sourcing structure, replacement analysis, and practical telecom-interface guidance. It also distinguishes the directly comparable SI3211-KT from unsupported cross-package substitutes, helping engineers make a package-aware decision before committing a design.
Bộ thay thế dễ dàng lắp đặt cho SI3211-E-FT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với SI3211-E-FT (cùng hình factor và footprint) — khác nhau ở Supply Voltage.
SI3211-KT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →SI3211-E-FT Thông số kỹ thuật
| Product Type | Subscriber Line Interface Concept (SLIC) codec with DTMF decoder |
| Channel Count | 1 channel |
| Điện áp cung cấp | 3.3 V or 5 V |
| Operating Current | 41 mA |
| Voice Channel Gain | 60 dB |
| DTMF Decoder | Integrated |
| Hộp | 38-pin TFSOP |
| Package Dimensions | 0.173 in (4.40 mm) width |
| Kiểu lắp đặt | Surface Mount |
| Power Rating | 700 mW |
| Integrated Circuit Category | Telecom interface IC |
| Manufacturer | Skyworks Solutions |
| Trạng thái vòng đời | Not for new designs |
Hướng dẫn cấu hình chân SI3211-E-FT 0.173 in (4.40 mm) width
Cấu hình chân cho SI3211-E-FT (0.173 in (4.40 mm) width gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho SI3211-E-FT.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
SI3211-E-FT phù hợp cho 6 Áp dụngs: Analog Telephone Handset Interface, Customer Premises Equipment, Private Branch Exchange Line Card, Voice-over-PoP Terminal, Telephone Line Test Equipment, Industrial Voice Terminal.
Analog Telephone Handset Interface
The SI3211-E-FT fits a single-line analog handset because it integrates the subscriber-line interface, codec, and DTMF decoder into one 38-pin TFSOP device. Its 60 dB voice-channel gain characteristic and approximately 41 mA operating current support a compact, power-conscious voice path, while operation from 3.3 V or 5 V provides flexibility in portable and desktop telephone architectures. Place the device near the line-network components, keep analog line routing away from digital traces, and use the manufacturer reference circuit for bypass capacitors, hook-state sensing, and gain configuration. Validate microphone and earpiece levels, line impedance, DTMF sensitivity, and codec timing in the complete handset rather than judging performance from component specifications alone.
Được đề xuất
Customer Premises Equipment
The SI3211-E-FT can provide the single subscriber-line voice interface in customer-premises equipment that terminates one analog line and passes digitized voice data to a system controller. The 38-pin TFSOP package keeps the line, codec, and DTMF functions in a compact surface-mount implementation, and the 3.3 V or 5 V supply options support both legacy and newer controller rails. The approximately 41 mA operating current is particularly relevant to compact CPE designs with limited thermal capacity. Confirm the external line-network values and system clocking against the datasheet, and keep high-level switching nodes away from the voice input to reduce channel noise and false DTMF detections.
Được đề xuất
Private Branch Exchange Line Card
A private branch exchange line card can use the SI3211-E-FT when each subscriber port requires an independent single-channel analog interface. Its integrated codec and DTMF decoder reduce the external component count around each line, while the 60 dB gain characteristic provides a defined starting point for voice-path calibration. Deploy one SI3211-E-FT per analog line, keep the high-voltage line-side network isolated from sensitive codec traces, and provide local decoupling for each device. Because this is a legacy interface IC, verify line-side protection, ringing behavior, maximum loop current, and thermal performance over the full product temperature range before approving the card for new deployments.
Được đề xuất
Voice-over-PoP Terminal
The SI3211-E-FT is applicable to a voice-over-PoP terminal that bridges an analog telephone line with packetized voice. The SLIC handles the physical subscriber-line connection, the codec produces digital voice samples, and the DTMF decoder exposes multifrequency signaling for call-control software. Its 3.3 V or 5 V operation can simplify integration with either a legacy telephone interface processor or a lower-voltage embedded controller. Use controlled return paths and separated analog and digital routing to prevent line-driver energy from corrupting the voice samples. System validation should cover echo behavior, line-impedance variation, codec clock synchronization, DTMF detection under noise, and continuity during packet-network interruption.
Được đề xuất
Telephone Line Test Equipment
The SI3211-E-FT can serve as the line-facing element in compact telephone-line test equipment because it combines voice-path conversion and DTMF recognition in a single package. A test set or line simulator can use the codec for speech-path measurements and the decoder to evaluate multifrequency signaling at the subscriber interface. The 38-pin TFSOP package supports compact, automated test hardware, and the 60 dB gain characteristic provides a useful reference point when calculating stimulus levels. Keep the device isolated from test-fixture transients and provide the specified protection networks. Validate accuracy against representative line impedances and account for temperature, codec delay, DTMF timing tolerances, and not-for-new-designs supply constraints.
Được đề xuất
Industrial Voice Terminal
An industrial voice terminal can use the SI3211-E-FT when it must support one analog telephone line, local call signaling, and a compact embedded control system. The integrated DTMF decoder reduces the need for a separate signaling receiver, while the single-channel SLIC/codec arrangement suits equipment where each terminal serves one line. Its approximately 41 mA operating current helps constrain power demand, and the 3.3 V or 5 V flexibility supports multiple industrial controller platforms. Design the printed-board layout with separate analog and digital ground-current paths, place line-network and bypass components close to the device, and avoid routing switching-regulator traces beneath the voice input. Qualification should include conducted noise, temperature cycling, surge exposure, and the expected telephone-line voltage range.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho SI3211-E-FT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | SI3211-KT |
|---|---|---|
| Brand | Skyworks Solutions | Silicon Laboratories |
| Package | 38-pin TFSOP | 38-pin TFSOP |
| Supply Voltage | 3.3 V or 5 V | 5 V |
| Power Rating | 700 mW | 700 mW |
| Mounting Style | Surface Mount | Surface Mount |
Bảo phân biệt quan trọng
- Broader documented supply-voltage choice (vsSI3211-KT)
- Documented operating-current figure (vsSI3211-KT)
- Defined single-channel gain characteristic (vsSI3211-KT)
Ghi chú thiết kế
Separate the subscriber-line and voice-input routing from digital data, clock, and switching-supply traces. Keep the external line-network components close to their corresponding device pins, and route analog and digital returns so line-driver and codec currents do not share narrow paths. Use the manufacturer reference layout as the basis for trace geometry, via placement, ground regions, and exposed pad or thermal-via treatment.
Follow the manufacturer guidance for supply bypassing, voltage tolerance, startup, and power sequencing. The SI3211-E-FT supports 3.3 V or 5 V operation, but the selected rail must satisfy the operating limits, ripple requirements, and load conditions for the complete telephone interface. Place high-frequency bypass capacitors at the device and provide adequate local return paths before evaluating the board-level supply network.
Do not treat a matching 38-pin TFSOP outline as proof of complete replacement. Verify pin names, analog levels, codec timing, DTMF behavior, line-drive capability, clocking, external component values, and operating-temperature limits between the original and candidate devices. The SI3211-KT is a package-compatible candidate, but production substitution requires a controlled engineering review and suitable equipment.
Treat the analog line interface as a high-energy, high-impedance environment relative to the codec circuitry. Keep switching nodes and inductors away from voice inputs, minimize loop area in sensitive returns, and confirm filtering at the external line network. Evaluate DTMF immunity and voice noise with the complete phone line, protection network, chassis, and system power supply because board-only measurements may miss conducted disturbances.
Thông tin tuân thủ
The SI3211-E-FT is a legacy telecom-interface IC and is listed as not for new designs. A distributor page includes a RoHS field, but the actual status text is not populated in the available product information.