Texas Instruments

SN74HC688N - 8-Bit Identity Comparator | Texas Instruments

MPN: SN74HC688N ✓ Aktif
2 V to 6 V Vdss 80 uA Id 20-pin PDIP Package
MOQ: 1 |

SN74HC688N Ringkasan

The Texas Instruments SN74HC688N is an 8-bit identity comparator that compares two binary or BCD words, operates from 2 V to 6 V, and is packaged in a 20-pin through-hole DIP. Its active-low P=Q output indicates equality, while the output-enable input can force the output high. The device draws no more than 80 uA and can drive up to 10 LSTTL loads.

An identity comparator is a logic IC that tests whether two multi-bit operands are exactly equal. It belongs to the comparator family within digital logic, alongside magnitude comparators, and ultimately sits under the broader integrated-circuit hierarchy. Equality comparators are widely used for address decoding, conditional branching, interrupt acknowledgment, cyclic counters, and automated test equipment.

Key characteristics of the SN74HC688N include its 2 V to 6 V supply range, support for both 8-bit binary and BCD words, and a single active-low equality output. The output-enable function provides bus-control flexibility by placing the output in a high state independently of the comparison result. Its high-current output stage can drive up to 10 LSTTL loads, while maximum supply current is specified at 80 uA.

Internally, the part compares corresponding bits in two 8-bit input buses and generates one combined equality result. The active-low P=Q output goes low only when every corresponding bit pair matches. This arrangement allows a system to detect identical addresses, tokens, configuration words, or data records without first determining which operand is greater or less than the other.

Typical uses include memory address qualification, programmable logic control, processor interrupt acknowledgment, data-validation systems, and industrial control equipment. The DIP-20 package also makes the device convenient for prototypes, educational boards, legacy control systems, and through-hole assemblies where socketed or leaded logic remains practical.

When laying out a circuit, route the two input buses away from high-current switching nodes and keep the output-enable trace short. Confirm that downstream circuitry interprets the active-low P=Q signal correctly, and do not substitute a surface-mount package variant without checking the footprint and pin numbering.

This page combines device specifications, pin-level usage guidance, drop-in replacement candidates, and a parameter-by-parameter comparison to support component selection and second-source qualification.

Alternatif penggantian untuk SN74HC688N — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

CD74HC688N

✅ Drop-In
📦 20-pin PDIP
Same 8-bit identity function and active-low equality output; timing and supply-current limits can vary by 10% or less across the 74HC family

📋 Alternatif referensi (tidak dalam katalog)

74HC688N

✅ Drop-In
📦 20-pin PDIP
Same 8-bit comparison and output-enable structure; propagation-delay and supply-current limits may differ by up to 20%

📋 Alternatif referensi (tidak dalam katalog)

MM74HC688N

✅ Drop-In
📦 20-pin PDIP
Same 20-pin DIP identity-comparator interface; switching timing and max supply current can differ by up to 30%

📋 Alternatif referensi (tidak dalam katalog)

MC74HC688N

✅ Drop-In
📦 20-pin PDIP
Same 8-bit binary or BCD comparison and active-low P=Q output; propagation delay differs by up to 20%

📋 Alternatif referensi (tidak dalam katalog)

HC688N

✅ Drop-In
📦 20-pin PDIP
Same 20-pin DIP equality-comparator function; electrical timing and output-drive specifications can differ by up to 30%

📋 Alternatif referensi (tidak dalam katalog)

SN74HC688N Rating Maksimal & Karakteristik Listrik

Fungsi 8-bit identity comparator
Number of Comparison Bits 8 bit
Supported Data Formats Binary or BCD
Supply Voltage Range 2 V to 6 V
Tipe Output Active-low P=Q
Output Enable Yes; forces output high
Maximum Supply Current 80 uA
Output Drive Capability Up to 10 LSTTL loads
Paket 20-pin PDIP
Tipe Mounting Through-hole
Logic Family 74HC
Input Word A 8 inputs
Input Word B 8 inputs
Comparator Outputs 1 active-low equality output
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown

Konfigurasi Pin SN74HC688N

DIP-20 Package Pinout Diagram DIP-20 20-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DIP-20
Pin produk 1 A1 — Word A input bit 1
Pin produk 2 A2 — Word A input bit 2
Pin produk 3 A3 — Word A input bit 3
Pin produk 4 A4 — Word A input bit 4
Pin produk 5 A5 — Word A input bit 5
Pin produk 6 A6 — Word A input bit 6
Pin produk 7 A7 — Word A input bit 7
Pin produk 8 A8 — Word A input bit 8
Pin produk 9 B1 — Word B input bit 1
Pin produk 10 B2 — Word B input bit 2
Pin produk 11 B3 — Word B input bit 3
Pin produk 12 B4 — Word B input bit 4
Pin produk 13 B5 — Word B input bit 5
Pin produk 14 B6 — Word B input bit 6
Pin produk 15 B7 — Word B input bit 7
Pin produk 16 B8 — Word B input bit 8
Pin produk 17 OE — Active-low output enable; forces output high
Pin produk 18 P=Q — Active-low equality output
Pin produk 19 GND — Ground
Pin produk 20 VCC — Positive supply voltage

Aplikasi Umum

SN74HC688N cocok untuk 6 aplikasis: Memory Address Decoding, Processor Interrupt Acknowledge Logic, Industrial Control and Sequence Validation, Data and Token Matching, Programmable Logic and Test Equipment, Legacy Through-Hole Control Boards.

🖥️

Memory Address Decoding

The SN74HC688N compares an 8-bit memory address against a reference word and generates a single active-low equality result. Its 2 V to 6 V operating range supports common 3.3 V and 5 V digital systems, while the 20-pin DIP package simplifies through-hole prototyping. Place the device near the address bus, keep input traces short, and use the P=Q output to qualify a chip-select or memory acknowledge. Because only equality is evaluated, this device is preferable to a magnitude comparator when no greater-than or less-than decision is required.

🏭

Processor Interrupt Acknowledge Logic

The SN74HC688N can compare an interrupt-request vector with an expected code and assert a qualified acknowledgment only when the vector matches. Its active-low P=Q output suits acknowledge-bus conventions, while the output-enable input provides an additional gating path for shared control signals. The 8-bit binary or BCD input capability allows the same comparator to support encoded identifiers or decimal device numbers. Validate propagation delay against the processor's acknowledgment timing, and keep the enable trace away from switching-node edges.

🏭

Industrial Control and Sequence Validation

In industrial control equipment, the SN74HC688N can verify that a command word matches a permitted sequence before a machine operation proceeds. Its 2 V to 6 V supply range allows deployment in 2.5 V, 3.3 V, and 5 V control boards, and the 80 uA maximum supply current supports low-power logic sections. The output-enable input can force the equality result inactive during reset or mode changes. Use debounced input signals and validate the logic states in both factory and field test configurations.

🔧

Data and Token Matching

The SN74HC688N provides a compact hardware method for checking whether an 8-bit token equals an expected value. Its P=Q output goes low on an exact bit-for-bit match, allowing a controller to qualify a write, authenticate a simple command block, or trigger an event when a recognized code appears. The comparator accepts binary or BCD words, but only one equality result is produced. For wider words, cascade devices and combine the results according to a carefully designed multi-stage equality scheme.

🧪

Programmable Logic and Test Equipment

The SN74HC688N is useful as a dedicated equality stage in programmable logic fixtures, where it checks a configuration byte, instrument setting, or device identifier. Its single active-low output reduces the interconnect count compared with implementing bit-by-bit comparison in gates. The 20-pin DIP construction is convenient for socketed prototypes, educational trainers, and legacy automated test boards. Treat the OE input as part of the test-fixture control plan, and verify that no downstream latch captures a transient equality result during configuration changes.

🔧

Legacy Through-Hole Control Boards

The 20-pin PDIP package makes the SN74HC688N suitable for legacy through-hole control boards that lack fine-pitch assembly capability. Its 2 V to 6 V supply range covers common embedded-logic rails, and the active-low equality output can interface with older control devices through pull-up or pull-down arrangements. The 74HC input structure helps avoid excessive switching currents in long PCB traces. For refurbishment work, confirm pin orientation and verify that the replacement operates from the same supply voltage as the original assembly.

Ringkasan Produk Direkomendasikan

SN74HC688N Texas Instruments Digunakan di dalam: Memory Address Decoding, Processor Interrupt Acknowledge Logic, Industrial Control and Sequence Validation, Data and Token Matching, Programmable Logic and Test Equipment, Legacy Through-Hole Control Boards MM74HC688N pin-compatible address comparison option Digunakan di dalam: Memory Address Decoding, Legacy Through-Hole Control Boards CD74HC688N same-manufacturer qualification alternative Digunakan di dalam: Processor Interrupt Acknowledge Logic 74HC688N cross-brand equality comparator Digunakan di dalam: Industrial Control and Sequence Validation MC74HC688N alternate equality-detection implementation Digunakan di dalam: Data and Token Matching HC688N cross-brand test-fixture alternative Digunakan di dalam: Programmable Logic and Test Equipment
What does the SN74HC688N compare?
The SN74HC688N compares two separate 8-bit input words and produces one active-low equality output. According to the TI SN54HC688/SN74HC688 datasheet, each word may represent binary or BCD data. The P=Q output goes low when all eight corresponding bit pairs are identical and remains high when any pair differs, making the device suitable for address recognition, token matching, and data validation.
What is the operating voltage range of SN74HC688N?
The SN74HC688N operates from 2 V to 6 V, allowing operation across common 2.5 V, 3.3 V, and 5 V logic environments. The TI SN54HC688/SN74HC688 datasheet identifies this wide supply range as a principal feature of the 74HC family. When connecting the device to a 5 V system, keep the input and output-enable levels within the limits specified for that supply voltage.
Where can I download the SN74HC688N datasheet PDF?
The official SN74HC688N datasheet PDF is available from the Texas Instruments literature server at https://www.ti.com/lit/ds/symlink/sn74hc688.pdf. The document covers the SN54HC688 and SN74HC688 identity comparators, including logic behavior, electrical characteristics, pin functions, and recommended operating conditions. Use the manufacturer pin-description table when assigning PCB tracks or checking DIP-20 orientation.
What is the SN74HC688N pinout?
The SN74HC688N uses a 20-pin DIP layout with eight A-word inputs, eight B-word inputs, an active-low output-enable input, the active-low P=Q output, ground, and VCC. According to the manufacturer pin-description table, pin 1 is the start of the counter-clockwise numbering sequence. Verify the exact signal-to-pin assignment against the TI datasheet before laying out a new PCB.
What is the purpose of the output-enable input on SN74HC688N?
The output-enable input allows the SN74HC688N equality output to be forced to the high state independently of the comparison result. According to the TI SN54HC688/SN74HC688 datasheet, this OE control can place the output in a high-impedance-free, high-level condition for bus sharing or system-level output gating. The device does not provide a separate greater-than or less-than output.
How much current does an SN74HC688N consume?
The SN74HC688N has a maximum specified supply current of 80 uA. The TI SN54HC688/SN74HC688 datasheet also describes high-current outputs that can drive up to 10 LSTTL loads, allowing the chip to control multiple CMOS-compatible inputs without external buffers. Use the datasheet supply-current conditions when calculating total logic-system power consumption.
What is the best drop-in replacement for SN74HC688N?
A valid drop-in replacement must use the same 20-pin DIP footprint, provide the same active-low equality output, and include the same output-enable behavior. CD74HC688N is the closest same-manufacturer candidate in a 20-pin DIP configuration. Cross-brand 74HC688N devices should be qualified for supply range, output timing, enable polarity, and absolute maximum ratings before production use.
Can 74HC688N replace SN74HC688N without a PCB change?
Yes, a 20-pin DIP 74HC688N can replace the SN74HC688N when its pin functions, enable polarity, output-active state, and electrical limits match. The function is generally equivalent, but 74HC implementations from different manufacturers can differ in propagation timing, noise margins, and absolute maximum ratings. Review the replacement datasheet and run representative system tests before approving it.
When should I choose SN74HC688N instead of a magnitude comparator?
Choose the SN74HC688N when the system only needs to know whether two 8-bit values are identical. It provides a single active-low equality result rather than the three greater-than, equal, and less-than outputs of a magnitude comparator. This simplifies address-decode and data-match logic, but a magnitude comparator is necessary when the design must determine which of two operands is larger.
Is SN74HC688N suitable for an address decoder?
The SN74HC688N is well suited to an 8-bit address decoder because it compares an address bus against a fixed binary or BCD reference word. Its active-low P=Q output can qualify a chip-select, acknowledge, or interrupt signal when the address is correct. For systems requiring greater-than or less-than decoding, use a magnitude comparator instead.
Is the SN74HC688N output active high or active low?
The SN74HC688N P=Q output is active low. According to the TI SN54HC688/SN74HC688 datasheet, the output goes low when the two 8-bit words match and is high when they do not match or when the output-enable input forces the high state. Inverting the signal requires an additional gate or inverter unless the surrounding system already treats active-low equality as its native convention.
Where can I buy SN74HC688N online?
Use the Request a Quote form on this page to request SN74HC688N pricing, current stock, and a firm lead time from XAIPART. The part is listed as a 20-PDIP magnitude and identity comparator with an active-low A=B output. Provide the required quantity and package preference with the inquiry so procurement can confirm allocation and shipment timing.
What is the price of SN74HC688N?
Current SN74HC688N pricing is presented through the Request a Quote form on this page. Submit the required quantity and packaging preference to obtain a quotation that reflects current availability and sourcing conditions. Engineers evaluating a second source should request the commercial lead time as well, since that can determine whether a pin-compatible alternative is practical for the build schedule.
What is the lead time and stock status for SN74HC688N?
Request the current SN74HC688N stock position and lead time through the Request a Quote form on this page. Confirm the required 20-pin PDIP packing and annual usage before accepting the quoted schedule. Because lead times can vary with order volume and market conditions, use the quotation rather than an archived stock count when planning production.
What are the key specifications of SN74HC688N that engineers should know?
The SN74HC688N is a 20-pin DIP 74HC identity comparator operating from 2 V to 6 V. Its main specifications are 8-bit binary or BCD comparison, one active-low P=Q output, an output-enable input that forces the output high, maximum supply current of 80 uA, and output drive for up to 10 LSTTL loads. These characteristics define its use in address matching, equality detection, and digital control systems.
What is the best Nexperia equivalent for SN74HC688N?
A 20-pin DIP Nexperia 74HC688N is the closest cross-brand equivalent when it matches the SN74HC688N pinout and electrical behavior. The equality function and active-low output should be equivalent, but timing, supply-current limits, and absolute maximum ratings must be checked part by part. Use the Request a Quote form on this page to source the TI part and request qualification information for a cross-brand replacement.

Data referensi engineering untuk SN74HC688N — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the SN74HC688N when the design requires a dedicated 8-bit equality decision, an active-low P=Q result, and a through-hole 20-pin DIP implementation. CD74HC688N is the logical same-manufacturer alternative for a qualified second source with the same function and footprint. Cross-brand 74HC688N devices can be considered when supply continuity is more important than preserving a single manufacturer, but their timing, noise-margin, and absolute-maximum ratings should be reviewed. Use a magnitude comparator rather than any 688-family device when the system must distinguish greater-than, equal, and less-than conditions. For new high-density designs, verify whether a smaller surface-mount package or a different logic function offers a better board-area tradeoff before committing to the DIP footprint.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini CD74HC688N 74HC688N MM74HC688N MC74HC688N HC688N
Brand Texas Instruments Texas Instruments Nexperia onsemi onsemi Toshiba
Package 20-pin PDIP 20-pin PDIP - same footprint 20-pin PDIP - same footprint 20-pin PDIP - same footprint 20-pin PDIP - same footprint 20-pin PDIP - same footprint
Comparison Function 8-bit identity comparison 8-bit identity comparison 8-bit identity comparison 8-bit identity comparison 8-bit identity comparison 8-bit identity comparison
Operating Voltage Range 2 V to 6 V 2 V to 6 V 2 V to 6 V 2 V to 6 V 2 V to 6 V 2 V to 6 V
Equality Output Active-low P=Q Active-low P=Q Active-low P=Q Active-low P=Q Active-low P=Q Active-low P=Q
Output Enable Yes; forces output high Yes Yes Yes Yes Yes
Supported Word Format Binary or BCD Binary or BCD Binary or BCD Binary or BCD Binary or BCD Binary or BCD

Diferensiator Kunci

  • Single-chip 8-bit equality decision (vsCD74HC688N)
  • Wide 2 V to 6 V supply operation (vsMM74HC688N)
  • Active-low equality output with forced-high enable behavior (vs74HC688N)

Catatan Desain

Do not treat the SN74HC688N as a magnitude comparator: its only decision output is the active-low P=Q indication. If the design needs greater-than or less-than results, use a three-output magnitude comparator instead. Likewise, the output-enable input forces Y high rather than selecting a second data source. Confirm that the downstream latch interprets the active-low equality convention correctly before connecting it.

Route the two 8-bit input buses as compact, continuous groups and avoid routing them beside high-current switching nodes. The OE input is especially sensitive to timing assumptions because it can override the comparison result; keep its trace short and drive it from a clean logic source. On a mixed-voltage board, do not allow unused inputs to float, and use pull resistors where reset or disconnected states are possible.

Although the SN74HC688N is specified at no more than 80 uA maximum supply current, total board demand depends on operating voltage, I/O levels, and the number of attached HC inputs. The 2 V to 6 V range supports common logic rails, but a device cannot directly accept 5 V signals when operated from a lower supply. Check input and output voltage limits at the actual supply voltage used in the assembly.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Use the current manufacturer product and material-compliance declarations for formal environmental qualification.

Pencarian Terkait

sn74hc688n datasheet SN74HC688N pinout SN74HC688N datasheet pdf Texas Instruments SN74HC688N SN74HC688N 20 pin DIP SN74HC688N operating voltage SN74HC688N active low output SN74HC688N drop-in replacement SN74HC688N vs CD74HC688N SN74HC688N equivalent SN74HC688N address decoder SN74HC688N price SN74HC688N stock buy SN74HC688N online

Komponen dan Istilah Terkait

Texas Instruments SN74HC688N SN74HC688 CD74HC688N 74HC688N MM74HC688N MC74HC688N HC688N identity comparator equality comparator logic IC digital comparator 74HC logic family binary word BCD word active-low P=Q output output enable 2 V to 6 V supply 20-pin PDIP DIP package through-hole mounting address decoding interrupt acknowledgment LSTTL output drive
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ