SN74HC688N - 8-Bit Identity Comparator | Texas Instruments
MPN: SN74HC688N ✓ פעילSN74HC688N סקירה
An identity comparator is a logic IC that tests whether two multi-bit operands are exactly equal. It belongs to the comparator family within digital logic, alongside magnitude comparators, and ultimately sits under the broader integrated-circuit hierarchy. Equality comparators are widely used for address decoding, conditional branching, interrupt acknowledgment, cyclic counters, and automated test equipment.
Key characteristics of the SN74HC688N include its 2 V to 6 V supply range, support for both 8-bit binary and BCD words, and a single active-low equality output. The output-enable function provides bus-control flexibility by placing the output in a high state independently of the comparison result. Its high-current output stage can drive up to 10 LSTTL loads, while maximum supply current is specified at 80 uA.
Internally, the part compares corresponding bits in two 8-bit input buses and generates one combined equality result. The active-low P=Q output goes low only when every corresponding bit pair matches. This arrangement allows a system to detect identical addresses, tokens, configuration words, or data records without first determining which operand is greater or less than the other.
Typical uses include memory address qualification, programmable logic control, processor interrupt acknowledgment, data-validation systems, and industrial control equipment. The DIP-20 package also makes the device convenient for prototypes, educational boards, legacy control systems, and through-hole assemblies where socketed or leaded logic remains practical.
When laying out a circuit, route the two input buses away from high-current switching nodes and keep the output-enable trace short. Confirm that downstream circuitry interprets the active-low P=Q signal correctly, and do not substitute a surface-mount package variant without checking the footprint and pin numbering.
This page combines device specifications, pin-level usage guidance, drop-in replacement candidates, and a parameter-by-parameter comparison to support component selection and second-source qualification.
חלופות תחליף ישיר עבור SN74HC688N — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
CD74HC688N
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
74HC688N
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MM74HC688N
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MC74HC688N
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
HC688N
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
SN74HC688N דירוגים מרביים ומאפיינים חשמליים
| פונקציה | 8-bit identity comparator |
| Number of Comparison Bits | 8 bit |
| Supported Data Formats | Binary or BCD |
| Supply Voltage Range | 2 V to 6 V |
| סוג פלט | Active-low P=Q |
| Output Enable | Yes; forces output high |
| Maximum Supply Current | 80 uA |
| Output Drive Capability | Up to 10 LSTTL loads |
| מארז | 20-pin PDIP |
| סוג הרכבה | Through-hole |
| Logic Family | 74HC |
| Input Word A | 8 inputs |
| Input Word B | 8 inputs |
| Comparator Outputs | 1 active-low equality output |
| סטטוס RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
תצורת פינים של SN74HC688N
| פין 1 | A1 — Word A input bit 1 |
| פין 2 | A2 — Word A input bit 2 |
| פין 3 | A3 — Word A input bit 3 |
| פין 4 | A4 — Word A input bit 4 |
| פין 5 | A5 — Word A input bit 5 |
| פין 6 | A6 — Word A input bit 6 |
| פין 7 | A7 — Word A input bit 7 |
| פין 8 | A8 — Word A input bit 8 |
| פין 9 | B1 — Word B input bit 1 |
| פין 10 | B2 — Word B input bit 2 |
| פין 11 | B3 — Word B input bit 3 |
| פין 12 | B4 — Word B input bit 4 |
| פין 13 | B5 — Word B input bit 5 |
| פין 14 | B6 — Word B input bit 6 |
| פין 15 | B7 — Word B input bit 7 |
| פין 16 | B8 — Word B input bit 8 |
| פין 17 | OE — Active-low output enable; forces output high |
| פין 18 | P=Q — Active-low equality output |
| פין 19 | GND — Ground |
| פין 20 | VCC — Positive supply voltage |
יישומים טיפוסיים
SN74HC688N מתאים עבור 6 יישוםs: Memory Address Decoding, Processor Interrupt Acknowledge Logic, Industrial Control and Sequence Validation, Data and Token Matching, Programmable Logic and Test Equipment, Legacy Through-Hole Control Boards.
Memory Address Decoding
The SN74HC688N compares an 8-bit memory address against a reference word and generates a single active-low equality result. Its 2 V to 6 V operating range supports common 3.3 V and 5 V digital systems, while the 20-pin DIP package simplifies through-hole prototyping. Place the device near the address bus, keep input traces short, and use the P=Q output to qualify a chip-select or memory acknowledge. Because only equality is evaluated, this device is preferable to a magnitude comparator when no greater-than or less-than decision is required.
מומלץ
Processor Interrupt Acknowledge Logic
The SN74HC688N can compare an interrupt-request vector with an expected code and assert a qualified acknowledgment only when the vector matches. Its active-low P=Q output suits acknowledge-bus conventions, while the output-enable input provides an additional gating path for shared control signals. The 8-bit binary or BCD input capability allows the same comparator to support encoded identifiers or decimal device numbers. Validate propagation delay against the processor's acknowledgment timing, and keep the enable trace away from switching-node edges.
מומלץ
Industrial Control and Sequence Validation
In industrial control equipment, the SN74HC688N can verify that a command word matches a permitted sequence before a machine operation proceeds. Its 2 V to 6 V supply range allows deployment in 2.5 V, 3.3 V, and 5 V control boards, and the 80 uA maximum supply current supports low-power logic sections. The output-enable input can force the equality result inactive during reset or mode changes. Use debounced input signals and validate the logic states in both factory and field test configurations.
מומלץ
Data and Token Matching
The SN74HC688N provides a compact hardware method for checking whether an 8-bit token equals an expected value. Its P=Q output goes low on an exact bit-for-bit match, allowing a controller to qualify a write, authenticate a simple command block, or trigger an event when a recognized code appears. The comparator accepts binary or BCD words, but only one equality result is produced. For wider words, cascade devices and combine the results according to a carefully designed multi-stage equality scheme.
מומלץ
Programmable Logic and Test Equipment
The SN74HC688N is useful as a dedicated equality stage in programmable logic fixtures, where it checks a configuration byte, instrument setting, or device identifier. Its single active-low output reduces the interconnect count compared with implementing bit-by-bit comparison in gates. The 20-pin DIP construction is convenient for socketed prototypes, educational trainers, and legacy automated test boards. Treat the OE input as part of the test-fixture control plan, and verify that no downstream latch captures a transient equality result during configuration changes.
מומלץ
Legacy Through-Hole Control Boards
The 20-pin PDIP package makes the SN74HC688N suitable for legacy through-hole control boards that lack fine-pitch assembly capability. Its 2 V to 6 V supply range covers common embedded-logic rails, and the active-low equality output can interface with older control devices through pull-up or pull-down arrangements. The 74HC input structure helps avoid excessive switching currents in long PCB traces. For refurbishment work, confirm pin orientation and verify that the replacement operates from the same supply voltage as the original assembly.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור SN74HC688N — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | CD74HC688N | 74HC688N | MM74HC688N | MC74HC688N | HC688N |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Nexperia | onsemi | onsemi | Toshiba |
| Package | 20-pin PDIP | 20-pin PDIP - same footprint | 20-pin PDIP - same footprint | 20-pin PDIP - same footprint | 20-pin PDIP - same footprint | 20-pin PDIP - same footprint |
| Comparison Function | 8-bit identity comparison | 8-bit identity comparison | 8-bit identity comparison | 8-bit identity comparison | 8-bit identity comparison | 8-bit identity comparison |
| Operating Voltage Range | 2 V to 6 V | 2 V to 6 V | 2 V to 6 V | 2 V to 6 V | 2 V to 6 V | 2 V to 6 V |
| Equality Output | Active-low P=Q | Active-low P=Q | Active-low P=Q | Active-low P=Q | Active-low P=Q | Active-low P=Q |
| Output Enable | Yes; forces output high | Yes | Yes | Yes | Yes | Yes |
| Supported Word Format | Binary or BCD | Binary or BCD | Binary or BCD | Binary or BCD | Binary or BCD | Binary or BCD |
מבדילים עיקריים
- Single-chip 8-bit equality decision (לעומתCD74HC688N)
- Wide 2 V to 6 V supply operation (לעומתMM74HC688N)
- Active-low equality output with forced-high enable behavior (לעומת74HC688N)
הערות תכנון
Do not treat the SN74HC688N as a magnitude comparator: its only decision output is the active-low P=Q indication. If the design needs greater-than or less-than results, use a three-output magnitude comparator instead. Likewise, the output-enable input forces Y high rather than selecting a second data source. Confirm that the downstream latch interprets the active-low equality convention correctly before connecting it.
Route the two 8-bit input buses as compact, continuous groups and avoid routing them beside high-current switching nodes. The OE input is especially sensitive to timing assumptions because it can override the comparison result; keep its trace short and drive it from a clean logic source. On a mixed-voltage board, do not allow unused inputs to float, and use pull resistors where reset or disconnected states are possible.
Although the SN74HC688N is specified at no more than 80 uA maximum supply current, total board demand depends on operating voltage, I/O levels, and the number of attached HC inputs. The 2 V to 6 V range supports common logic rails, but a device cannot directly accept 5 V signals when operated from a lower supply. Check input and output voltage limits at the actual supply voltage used in the assembly.
מידע על תאימות
Use the current manufacturer product and material-compliance declarations for formal environmental qualification.