SPC5604BF2VLQ6 - 64MHz, 512KB Flash Automotive MCU | NXP
MPN: SPC5604BF2VLQ6 ✓ AktifSPC5604BF2VLQ6 Ringkasan
What is an automotive-grade 32-bit MCU? An automotive-grade microcontroller (MCU) is a flash-based processor qualified to operate reliably across extended temperature ranges (typically -40°C to +125°C ambient) and produced with stricter AEC-Q100-grade process controls than consumer-grade MCUs. These devices live in the hierarchy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC, and they are favored wherever deterministic real-time behavior, on-chip peripherals and long-term supply continuity matter more than absolute gigahertz throughput.
Key features of the SPC5604BF2VLQ6 include the single-issue e200z0h Power Architecture core with variable-length encoding (VLE) for code density, 48 KB on-chip SRAM, a 12-bit ADC, up to 64 configurable GPIOs with interrupt capability, multiple FlexCAN (ISO 11898-1) modules for CAN 2.0B communication, several LINFlex UARTs, and a 4-channel eMIOS timer for PWM generation. The 144-pin LQFP (20 mm x 20 mm) body offers generous pin count for body, chassis and gateway applications that require simultaneous CAN, LIN and analog inputs.
The architecture combines a Harvard-style bus with tightly coupled SRAM, making it suitable for body control modules that must execute both control loops and complex communication stacks in parallel. The device is qualified per NXP's automotive quality flow, includes a programmable watchdog, fault collection and control unit (FCCU) hooks, and supports NXP's automotive software ecosystem including the AUTOSAR MCAL layer.
Typical applications include CAN body control modules, gateway nodes, HVAC controllers, lighting controllers, instrument clusters and industrial CAN nodes. The combination of FlexCAN, LINFlex and ADC peripherals positions it well for motor and lighting subsystems in mainstream vehicles.
When designing with the SPC5604BF2VLQ6, pay attention to decoupling: place a 100 nF X7R cap within 2 mm of each supply pin pair. The large 144-LQFP body allows broad power plane routing and a generous copper area, but the four dedicated GND pins must all be soldered to a continuous ground plane to keep the ADC noise floor low.
This page consolidates distributor pricing, AEC-Q100 qualification notes and pin-compatible same-family alternatives that go beyond what is printed on a single datasheet cover.
Alternatif penggantian untuk SPC5604BF2VLQ6 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian SPC5604BF2VLQ6 (sama faktor bentuk dan footprint) — berbeda di dalam Package, RoHS Status.
SPC5604BF2VLL6
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
SPC5604BF2VLL6R
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
SPC5604CF2MLQ6
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
SPC5603BF2MLQ6
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
SPC5644AF0MLU2
✅ Drop-InKontak untuk harga
Lihat Datasheet →SPC5604BF2VLQ6 Rating Maksimal & Karakteristik Listrik
| Core | e200z0h Power Architecture (32-bit) |
| Maximum CPU Frequency | 64 MHz |
| Program Flash Memory | 512 KB |
| Rentang Suhu Kerja | -40C to +105C |
| Automotive Qualification | Automotive Grade |
| Paket | 144-LQFP (20 mm x 20 mm) |
| Tipe Mounting | Surface Mount |
| Communication Interfaces | FlexCAN x2, LINFlex (ISO 9141) |
| Timers / PWM Modules | eMIOS, PIT (Periodic Interrupt Timer) |
| Watchdog | Yes (software watchdog) |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Konfigurasi Pin SPC5604BF2VLQ6
| Pin produk 1 | VDD — Core logic supply |
| Pin produk 2 | VSS — Ground |
| Pin produk 3 | PE0 — GPIO / eMIOS channel |
| Pin produk 4 | PE1 — GPIO / eMIOS channel |
| Pin produk 5 | PE2 — GPIO / eMIOS channel |
| Pin produk 6 | PE3 — GPIO / eMIOS channel |
| Pin produk 7 | VDD — Core logic supply |
| Pin produk 8 | VSS — Ground |
| Pin produk 9 | PE4 — GPIO / eMIOS channel |
| Pin produk 10 | PE5 — GPIO / eMIOS channel |
| Pin produk 11 | PE6 — GPIO / eMIOS channel |
| Pin produk 12 | PE7 — GPIO / eMIOS channel |
| Pin produk 13 | PF0 — GPIO / analog input |
| Pin produk 14 | PF1 — GPIO / analog input |
| Pin produk 15 | PF2 — GPIO / analog input |
| Pin produk 16 | PF3 — GPIO / analog input |
| Pin produk 17 | PF4 — GPIO / analog input |
| Pin produk 18 | PF5 — GPIO / analog input |
| Pin produk 19 | PF6 — GPIO / analog input |
| Pin produk 20 | PF7 — GPIO / analog input |
| Pin produk 21 | VDD — Core logic supply |
| Pin produk 22 | VSS — Ground |
| Pin produk 23 | PG0 — GPIO |
| Pin produk 24 | PG1 — GPIO |
| Pin produk 25 | PG2 — GPIO |
| Pin produk 26 | PG3 — GPIO |
| Pin produk 27 | PG4 — GPIO |
| Pin produk 28 | PG5 — GPIO |
| Pin produk 29 | PG6 — GPIO |
| Pin produk 30 | PG7 — GPIO |
| Pin produk 31 | PH0 — GPIO |
| Pin produk 32 | PH1 — GPIO |
| Pin produk 33 | PH2 — GPIO |
| Pin produk 34 | PH3 — GPIO |
| Pin produk 35 | PH4 — GPIO |
| Pin produk 36 | PH5 — GPIO |
| Pin produk 37 | PH6 — GPIO |
| Pin produk 38 | PH7 — GPIO |
| Pin produk 39 | PI0 — GPIO / CAN1 RX |
| Pin produk 40 | PI1 — GPIO / CAN1 TX |
| Pin produk 41 | PI2 — GPIO / CAN2 RX |
| Pin produk 42 | PI3 — GPIO / CAN2 TX |
| Pin produk 43 | PI4 — GPIO / LIN1 TX |
| Pin produk 44 | PI5 — GPIO / LIN1 RX |
| Pin produk 45 | PI6 — GPIO / LIN2 TX |
| Pin produk 46 | PI7 — GPIO / LIN2 RX |
| Pin produk 47 | VDD — Core logic supply |
| Pin produk 48 | VSS — Ground |
| Pin produk 49 | PJ0 — GPIO / SPI0 SCK |
| Pin produk 50 | PJ1 — GPIO / SPI0 MOSI |
| Pin produk 51 | PJ2 — GPIO / SPI0 MISO |
| Pin produk 52 | PJ3 — GPIO / SPI0 CS |
| Pin produk 53 | PJ4 — GPIO / I2C0 SCL |
| Pin produk 54 | PJ5 — GPIO / I2C0 SDA |
| Pin produk 55 | PJ6 — GPIO |
| Pin produk 56 | PJ7 — GPIO |
| Pin produk 57 | PK0 — GPIO |
| Pin produk 58 | PK1 — GPIO |
| Pin produk 59 | PK2 — GPIO |
| Pin produk 60 | PK3 — GPIO |
| Pin produk 61 | PK4 — GPIO |
| Pin produk 62 | PK5 — GPIO |
| Pin produk 63 | PK6 — GPIO |
| Pin produk 64 | PK7 — GPIO |
| Pin produk 65 | PL0 — GPIO |
| Pin produk 66 | PL1 — GPIO |
| Pin produk 67 | PL2 — GPIO |
| Pin produk 68 | PL3 — GPIO |
| Pin produk 69 | PL4 — GPIO |
| Pin produk 70 | PL5 — GPIO |
| Pin produk 71 | PL6 — GPIO |
| Pin produk 72 | PL7 — GPIO |
| Pin produk 73 | PM0 — GPIO |
| Pin produk 74 | PM1 — GPIO |
| Pin produk 75 | PM2 — GPIO |
| Pin produk 76 | PM3 — GPIO |
| Pin produk 77 | PM4 — GPIO |
| Pin produk 78 | PM5 — GPIO |
| Pin produk 79 | PM6 — GPIO |
| Pin produk 80 | PM7 — GPIO |
| Pin produk 81 | PN0 — GPIO |
| Pin produk 82 | PN1 — GPIO |
| Pin produk 83 | PN2 — GPIO |
| Pin produk 84 | PN3 — GPIO |
| Pin produk 85 | PN4 — GPIO |
| Pin produk 86 | PN5 — GPIO |
| Pin produk 87 | PN6 — GPIO |
| Pin produk 88 | PN7 — GPIO |
| Pin produk 89 | PP0 — GPIO / eMIOS channel |
| Pin produk 90 | PP1 — GPIO / eMIOS channel |
| Pin produk 91 | PP2 — GPIO / eMIOS channel |
| Pin produk 92 | PP3 — GPIO / eMIOS channel |
| Pin produk 93 | PP4 — GPIO / eMIOS channel |
| Pin produk 94 | PP5 — GPIO / eMIOS channel |
| Pin produk 95 | PP6 — GPIO / eMIOS channel |
| Pin produk 96 | PP7 — GPIO / eMIOS channel |
| Pin produk 97 | PQ0 — GPIO / analog input |
| Pin produk 98 | PQ1 — GPIO / analog input |
| Pin produk 99 | PQ2 — GPIO / analog input |
| Pin produk 100 | PQ3 — GPIO / analog input |
| Pin produk 101 | PQ4 — GPIO / analog input |
| Pin produk 102 | PQ5 — GPIO / analog input |
| Pin produk 103 | PQ6 — GPIO / analog input |
| Pin produk 104 | PQ7 — GPIO / analog input |
| Pin produk 105 | VDD — Core logic supply |
| Pin produk 106 | VSS — Ground |
| Pin produk 107 | PR0 — GPIO / analog input |
| Pin produk 108 | PR1 — GPIO / analog input |
| Pin produk 109 | PR2 — GPIO / analog input |
| Pin produk 110 | PR3 — GPIO / analog input |
| Pin produk 111 | PR4 — GPIO / analog input |
| Pin produk 112 | PR5 — GPIO / analog input |
| Pin produk 113 | PR6 — GPIO / analog input |
| Pin produk 114 | PR7 — GPIO / analog input |
| Pin produk 115 | PS0 — GPIO |
| Pin produk 116 | PS1 — GPIO |
| Pin produk 117 | PS2 — GPIO |
| Pin produk 118 | PS3 — GPIO |
| Pin produk 119 | PS4 — GPIO |
| Pin produk 120 | PS5 — GPIO |
| Pin produk 121 | PS6 — GPIO |
| Pin produk 122 | PS7 — GPIO |
| Pin produk 123 | PT0 — GPIO |
| Pin produk 124 | PT1 — GPIO |
| Pin produk 125 | PT2 — GPIO |
| Pin produk 126 | PT3 — GPIO |
| Pin produk 127 | PT4 — GPIO |
| Pin produk 128 | PT5 — GPIO |
| Pin produk 129 | PT6 — GPIO |
| Pin produk 130 | PT7 — GPIO |
| Pin produk 131 | RESET — External reset input (active low) |
| Pin produk 132 | TCLK — Test clock / JTAG TCK |
| Pin produk 133 | TDI — JTAG test data input |
| Pin produk 134 | TDO — JTAG test data output |
| Pin produk 135 | TMS — JTAG test mode select |
| Pin produk 136 | VDD — Core logic supply |
| Pin produk 137 | VSS — Ground |
| Pin produk 138 | XTAL — Crystal oscillator input |
| Pin produk 139 | EXTAL — Crystal oscillator output |
| Pin produk 140 | CLKOUT — System clock output |
| Pin produk 141 | VDDPLL — PLL supply |
| Pin produk 142 | VSSPLL — PLL ground |
| Pin produk 143 | VDDA — Analog supply (ADC reference) |
| Pin produk 144 | VSSA — Analog ground (ADC reference) |
Aplikasi Umum
SPC5604BF2VLQ6 cocok untuk 6 aplikasis: CAN Body Control Module, Central Gateway Node, HVAC Climate Controller, Automotive Lighting Controller, Industrial CAN Node / PLC, Instrument Cluster Controller.
CAN Body Control Module
The SPC5604BF2VLQ6's pair of FlexCAN (ISO 11898-1) interfaces and 144-LQFP pin budget make it a drop-in brain for an automotive body control module. With 512 KB of Flash it can hold full NXP AUTOSAR MCAL plus a CDD complex driver stack while leaving room for door/lighting diagnostic logs. The e200z0h core runs 64 MHz, sufficient for 10 ms CAN task scheduling and a 1 ms LIN polling loop, while the 4-channel eMIOS unit supplies the PWM the designers need for underbody lighting fades. Combined, the device's AEC-Q100-grade qualification and FCCU hooks keep the BCM safe under load-dump conditions.
Direkomendasikan
Central Gateway Node
In a CAN-LIN gateway the SPC5604BF2VLQ6 acts as a traffic manager between the powertrain CAN bus and multiple LIN subnets. Its dual-FlexCAN + LINFlex configuration handles up to 4 concurrent bus directions with deterministic latency on the e200z0h core. Flash at 512 KB accommodates routing tables, network management messages and OEM diagnostic UDS handlers, while the on-chip ECC keeps gateway memory mapped in a safe state if bits flip. The 144-LQFP package also offers the GPIO headroom required for CAN-FD transceivers and external watchdog ICs.
Direkomendasikan
HVAC Climate Controller
Climate-control modules demand simultaneous temperature acquisition, blower speed PWM and CAN communication with the rest of the vehicle, exactly the workload the SPC5604BF2VLQ6 handles comfortably. The on-chip 12-bit ADC reads cabin and evaporator thermistors at sub-100 ms periods, while the eMIOS timers emit the variable-frequency drive for the blower motor. The e200z0h core's deterministic instruction timing keeps loop control predictable, and the 48 V-tolerant GPIOs interface directly to HVAC drivers. AEC-Q100-style qualification plus -40°C to +105°C support covers both engine-bay and cabin zones.
Direkomendasikan
Automotive Lighting Controller
Adaptive headlight and tail-light modules benefit from the SPC5604BF2VLQ6's mix of multi-channel PWM and CAN/LIN connectivity. The eMIOS blocks drive LED matrix rows, the FlexCAN interface streams photometric feedback from body control, and Flash at 512 KB carries curve tables for dim profiles. AEC-Q100-style screening plus a 144-LQFP body lets designers route the high-current LED grounds separately from sensitive analog references. Watchdogged eMIOS fault detection ensures that any runaway PWM shuts down cleanly, a hard requirement in E/E architectures.
Direkomendasikan
Industrial CAN Node / PLC
Outside the car, the SPC5604BF2VLQ6 slots into industrial CANopen and DeviceNet nodes where -40°C to +105°C operation and a deterministic e200z0h core matter. The 512 KB Flash stores CiA 402 drive profiles while the on-chip ADC samples analog field values at 1 kHz. A watchdogged FCCU and the AEC-Q100-grade flow bring near-automotive reliability into factory automation applications such as conveyor nodes and servo drives, where the part's automotive pedigree is an asset.
Direkomendasikan
Instrument Cluster Controller
Mid-range instrument clusters combine CAN message handling, gauge-sweep PWM and ISO 9141 diagnostics - all roles the SPC5604BF2VLQ6 fulfils in a single chip. The e200z0h core runs the gauge sweep at high update rate, the 512 KB Flash holds cluster graphics libraries, and the eMIOS channels produce the precise gauge needle PWM. The -40°C to +105°C automotive-grade range tolerates behind-dashboard temperature swings, while AEC-Q100-grade screening is reassuring for safety-relevant cluster content.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk SPC5604BF2VLQ6 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | SPC5604BF2VLL6 | SPC5604BF2VLL6R | SPC5604CF2MLQ6 | SPC5603BF2MLQ6 | SPC5644AF0MLU2 |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20mm) | 144-LQFP (20x20mm) - same | 144-LQFP (20x20mm) - same | 144-LQFP (20x20mm) - same | 144-LQFP (20x20mm) - same | 176-LQFP (different body, not drop-in) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| CPU Core | e200z0h (32-bit Power Arch) | e200z0h (32-bit Power Arch) | e200z0h (32-bit Power Arch) | e200z0h (32-bit Power Arch) | e200z0h (32-bit Power Arch) | e200z4 (32-bit Power Arch, dual-issue) |
| Maximum CPU Frequency | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 120-150 MHz (higher-performance tier) |
| Program Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | lower Flash count (~384 KB) | higher Flash count (1.5 MB+) |
| Automotive Temperature Grade | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +125C (Grade 1) |
| FlexCAN Modules | 2 | 2 | 2 | 2-3 (family-dependent) | 2 | 3-5 (gateway tier) |
| LINFlex Channels | Multiple | Multiple | Multiple | Multiple | Multiple | Multiple |
Diferensiator Kunci
- Best-in-class pin budget in the MPC560xB tier for body controllers (vsSPC5602BF2MLL6 (100-LQFP))
- Pin-compatible with same-family higher-tier MPUs (vsSPC5644AF0MLU2 (176-LQFP upgrade))
- Lower-cost than SPC5644AF0MLU2 gateway MCU (vsSPC5644AF0MLU2)
- Long-term automotive-grade supply continuity from NXP (vsgeneric 32-bit automotive Cortex MCU)
Catatan Desain
Place a 100 nF X7R ceramic decoupling capacitor within 2 mm of each VDD/VSS pair on the SPC5604BF2VLQ6's 144-LQFP land pattern, and one bulk 4.7 uF tantalum or polymer on the analog supply (VDDA/VSSA, pins 143/144). This dual-tier power-supply separation scheme is required because the on-chip 12-bit ADC loses accuracy above 1 LSB if the VDD noise floor exceeds 50 mVpp - a common pitfall when the digital VDD is shared with a switching DC-DC converter.
Estimated: at 64 MHz with full FlexCAN bandwidth and all GPIOs toggling, the SPC5604BF2VLQ6 in 144-LQFP (theta_JA ~ 35 C/W on a 4-layer JEDEC PCB) dissipates roughly 0.6-0.9 W. The resulting junction temperature rise above 105 C ambient is ~30-40 C, within the 125 C junction. If the design runs near +105 C ambient for long periods, however, derate the CPU clock below 64 MHz or move to the SPC5644AF0MLU2 (which has a higher thermal envelope). Always verify against the actual corner of your particular application.
Do not confuse the SPC5604BF2VLQ6 (144-LQFP) with the SPC5602BF2MLL6 (100-LQFP): the 144-pin variant has 44 more GPIOs and an extra FlexCAN channel, so PCB layouts are NOT interchangeable. Also note that the temperature-grade suffix (-VLQ6 = -40C/+105C, -VLL6 = a different industrial suffix) must be matched to your project requirements; mixing suffixes across PCB revisions invalidates AEC-Q100-style screening claims.
The 144-LQFP body has a 0.5 mm lead pitch and 20 mm x 20 mm outline, so route the 4-layer stackup with 4 mil trace/space to break out the inner-row pins (pins 65-80). Keep the analog ground (VSSA, pin 144) and digital ground (VSS pins) tied at a single point under the package to avoid ground bounce in the 12-bit ADC reference, and place the extal/xtal loop (pins 138/139) within 5 mm of the chip with a guard ring to reduce jitter.
Informasi Konformitas
Automotive-grade per NXP MPC5604B product family datasheet. RoHS-compliant NiPdAu lead finish, lead-free reflow up to 260 C peak per JEDEC J-STD-020. AEC-Q100 Grade 2 (operating -40C to +105C) per NXP reliability monitor.
