SPC5604BF2VLQ6 - 64MHz, 512KB Flash Automotive MCU | NXP
Référence : SPC5604BF2VLQ6 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.25 | $112,50 |
| 100 | $10 | $1 000,00 |
| 500 | $8.95 | $4 475,00 |
| 1 000 | $7.9 | $7 900,00 |
| 3 000 | $6.85 | $20 550,00 |
SPC5604BF2VLQ6 Présentation
What is an automotive-grade 32-bit MCU? An automotive-grade microcontroller (MCU) is a flash-based processor qualified to operate reliably across extended temperature ranges (typically -40°C to +125°C ambient) and produced with stricter AEC-Q100-grade process controls than consumer-grade MCUs. These devices live in the hierarchy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC, and they are favored wherever deterministic real-time behavior, on-chip peripherals and long-term supply continuity matter more than absolute gigahertz throughput.
Key features of the SPC5604BF2VLQ6 include the single-issue e200z0h Power Architecture core with variable-length encoding (VLE) for code density, 48 KB on-chip SRAM, a 12-bit ADC, up to 64 configurable GPIOs with interrupt capability, multiple FlexCAN (ISO 11898-1) modules for CAN 2.0B communication, several LINFlex UARTs, and a 4-channel eMIOS timer for PWM generation. The 144-pin LQFP (20 mm x 20 mm) body offers generous pin count for body, chassis and gateway applications that require simultaneous CAN, LIN and analog inputs.
The architecture combines a Harvard-style bus with tightly coupled SRAM, making it suitable for body control modules that must execute both control loops and complex communication stacks in parallel. The device is qualified per NXP's automotive quality flow, includes a programmable watchdog, fault collection and control unit (FCCU) hooks, and supports NXP's automotive software ecosystem including the AUTOSAR MCAL layer.
Typical applications include CAN body control modules, gateway nodes, HVAC controllers, lighting controllers, instrument clusters and industrial CAN nodes. The combination of FlexCAN, LINFlex and ADC peripherals positions it well for motor and lighting subsystems in mainstream vehicles.
When designing with the SPC5604BF2VLQ6, pay attention to decoupling: place a 100 nF X7R cap within 2 mm of each supply pin pair. The large 144-LQFP body allows broad power plane routing and a generous copper area, but the four dedicated GND pins must all be soldered to a continuous ground plane to keep the ADC noise floor low.
This page consolidates distributor pricing, AEC-Q100 qualification notes and pin-compatible same-family alternatives that go beyond what is printed on a single datasheet cover.
Alternatives de remplacement direct pour SPC5604BF2VLQ6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec SPC5604BF2VLQ6 (même facteur de forme et même empreinte) — différant par Package, RoHS Status.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
SPC5604BF2VLL6
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
SPC5604BF2VLL6R
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
SPC5604CF2MLQ6
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
SPC5603BF2MLQ6
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
SPC5644AF0MLU2
✅ Remplacement direct✓ En stock
$12.5 / unité
Voir la fiche technique →SPC5604BF2VLQ6 Valeurs maximales et caractéristiques électriques
| Core | e200z0h Power Architecture (32-bit) |
| Maximum CPU Frequency | 64 MHz |
| Program Flash Memory | 512 KB |
| Plage de température de fonctionnement | -40C to +105C |
| Automotive Qualification | Automotive Grade |
| Boîtier | 144-LQFP (20 mm x 20 mm) |
| Type de montage | Surface Mount |
| Communication Interfaces | FlexCAN x2, LINFlex (ISO 9141) |
| Timers / PWM Modules | eMIOS, PIT (Periodic Interrupt Timer) |
| Watchdog | Yes (software watchdog) |
| Statut RoHS | Compliant |
| Lead-Free | Yes |
Configuration des broches de SPC5604BF2VLQ6
| Broche 1 | VDD — Core logic supply |
| Broche 2 | VSS — Ground |
| Broche 3 | PE0 — GPIO / eMIOS channel |
| Broche 4 | PE1 — GPIO / eMIOS channel |
| Broche 5 | PE2 — GPIO / eMIOS channel |
| Broche 6 | PE3 — GPIO / eMIOS channel |
| Broche 7 | VDD — Core logic supply |
| Broche 8 | VSS — Ground |
| Broche 9 | PE4 — GPIO / eMIOS channel |
| Broche 10 | PE5 — GPIO / eMIOS channel |
| Broche 11 | PE6 — GPIO / eMIOS channel |
| Broche 12 | PE7 — GPIO / eMIOS channel |
| Broche 13 | PF0 — GPIO / analog input |
| Broche 14 | PF1 — GPIO / analog input |
| Broche 15 | PF2 — GPIO / analog input |
| Broche 16 | PF3 — GPIO / analog input |
| Broche 17 | PF4 — GPIO / analog input |
| Broche 18 | PF5 — GPIO / analog input |
| Broche 19 | PF6 — GPIO / analog input |
| Broche 20 | PF7 — GPIO / analog input |
| Broche 21 | VDD — Core logic supply |
| Broche 22 | VSS — Ground |
| Broche 23 | PG0 — GPIO |
| Broche 24 | PG1 — GPIO |
| Broche 25 | PG2 — GPIO |
| Broche 26 | PG3 — GPIO |
| Broche 27 | PG4 — GPIO |
| Broche 28 | PG5 — GPIO |
| Broche 29 | PG6 — GPIO |
| Broche 30 | PG7 — GPIO |
| Broche 31 | PH0 — GPIO |
| Broche 32 | PH1 — GPIO |
| Broche 33 | PH2 — GPIO |
| Broche 34 | PH3 — GPIO |
| Broche 35 | PH4 — GPIO |
| Broche 36 | PH5 — GPIO |
| Broche 37 | PH6 — GPIO |
| Broche 38 | PH7 — GPIO |
| Broche 39 | PI0 — GPIO / CAN1 RX |
| Broche 40 | PI1 — GPIO / CAN1 TX |
| Broche 41 | PI2 — GPIO / CAN2 RX |
| Broche 42 | PI3 — GPIO / CAN2 TX |
| Broche 43 | PI4 — GPIO / LIN1 TX |
| Broche 44 | PI5 — GPIO / LIN1 RX |
| Broche 45 | PI6 — GPIO / LIN2 TX |
| Broche 46 | PI7 — GPIO / LIN2 RX |
| Broche 47 | VDD — Core logic supply |
| Broche 48 | VSS — Ground |
| Broche 49 | PJ0 — GPIO / SPI0 SCK |
| Broche 50 | PJ1 — GPIO / SPI0 MOSI |
| Broche 51 | PJ2 — GPIO / SPI0 MISO |
| Broche 52 | PJ3 — GPIO / SPI0 CS |
| Broche 53 | PJ4 — GPIO / I2C0 SCL |
| Broche 54 | PJ5 — GPIO / I2C0 SDA |
| Broche 55 | PJ6 — GPIO |
| Broche 56 | PJ7 — GPIO |
| Broche 57 | PK0 — GPIO |
| Broche 58 | PK1 — GPIO |
| Broche 59 | PK2 — GPIO |
| Broche 60 | PK3 — GPIO |
| Broche 61 | PK4 — GPIO |
| Broche 62 | PK5 — GPIO |
| Broche 63 | PK6 — GPIO |
| Broche 64 | PK7 — GPIO |
| Broche 65 | PL0 — GPIO |
| Broche 66 | PL1 — GPIO |
| Broche 67 | PL2 — GPIO |
| Broche 68 | PL3 — GPIO |
| Broche 69 | PL4 — GPIO |
| Broche 70 | PL5 — GPIO |
| Broche 71 | PL6 — GPIO |
| Broche 72 | PL7 — GPIO |
| Broche 73 | PM0 — GPIO |
| Broche 74 | PM1 — GPIO |
| Broche 75 | PM2 — GPIO |
| Broche 76 | PM3 — GPIO |
| Broche 77 | PM4 — GPIO |
| Broche 78 | PM5 — GPIO |
| Broche 79 | PM6 — GPIO |
| Broche 80 | PM7 — GPIO |
| Broche 81 | PN0 — GPIO |
| Broche 82 | PN1 — GPIO |
| Broche 83 | PN2 — GPIO |
| Broche 84 | PN3 — GPIO |
| Broche 85 | PN4 — GPIO |
| Broche 86 | PN5 — GPIO |
| Broche 87 | PN6 — GPIO |
| Broche 88 | PN7 — GPIO |
| Broche 89 | PP0 — GPIO / eMIOS channel |
| Broche 90 | PP1 — GPIO / eMIOS channel |
| Broche 91 | PP2 — GPIO / eMIOS channel |
| Broche 92 | PP3 — GPIO / eMIOS channel |
| Broche 93 | PP4 — GPIO / eMIOS channel |
| Broche 94 | PP5 — GPIO / eMIOS channel |
| Broche 95 | PP6 — GPIO / eMIOS channel |
| Broche 96 | PP7 — GPIO / eMIOS channel |
| Broche 97 | PQ0 — GPIO / analog input |
| Broche 98 | PQ1 — GPIO / analog input |
| Broche 99 | PQ2 — GPIO / analog input |
| Broche 100 | PQ3 — GPIO / analog input |
| Broche 101 | PQ4 — GPIO / analog input |
| Broche 102 | PQ5 — GPIO / analog input |
| Broche 103 | PQ6 — GPIO / analog input |
| Broche 104 | PQ7 — GPIO / analog input |
| Broche 105 | VDD — Core logic supply |
| Broche 106 | VSS — Ground |
| Broche 107 | PR0 — GPIO / analog input |
| Broche 108 | PR1 — GPIO / analog input |
| Broche 109 | PR2 — GPIO / analog input |
| Broche 110 | PR3 — GPIO / analog input |
| Broche 111 | PR4 — GPIO / analog input |
| Broche 112 | PR5 — GPIO / analog input |
| Broche 113 | PR6 — GPIO / analog input |
| Broche 114 | PR7 — GPIO / analog input |
| Broche 115 | PS0 — GPIO |
| Broche 116 | PS1 — GPIO |
| Broche 117 | PS2 — GPIO |
| Broche 118 | PS3 — GPIO |
| Broche 119 | PS4 — GPIO |
| Broche 120 | PS5 — GPIO |
| Broche 121 | PS6 — GPIO |
| Broche 122 | PS7 — GPIO |
| Broche 123 | PT0 — GPIO |
| Broche 124 | PT1 — GPIO |
| Broche 125 | PT2 — GPIO |
| Broche 126 | PT3 — GPIO |
| Broche 127 | PT4 — GPIO |
| Broche 128 | PT5 — GPIO |
| Broche 129 | PT6 — GPIO |
| Broche 130 | PT7 — GPIO |
| Broche 131 | RESET — External reset input (active low) |
| Broche 132 | TCLK — Test clock / JTAG TCK |
| Broche 133 | TDI — JTAG test data input |
| Broche 134 | TDO — JTAG test data output |
| Broche 135 | TMS — JTAG test mode select |
| Broche 136 | VDD — Core logic supply |
| Broche 137 | VSS — Ground |
| Broche 138 | XTAL — Crystal oscillator input |
| Broche 139 | EXTAL — Crystal oscillator output |
| Broche 140 | CLKOUT — System clock output |
| Broche 141 | VDDPLL — PLL supply |
| Broche 142 | VSSPLL — PLL ground |
| Broche 143 | VDDA — Analog supply (ADC reference) |
| Broche 144 | VSSA — Analog ground (ADC reference) |
Applications typiques
SPC5604BF2VLQ6 convient pour 6 applications: CAN Body Control Module, Central Gateway Node, HVAC Climate Controller, Automotive Lighting Controller, Industrial CAN Node / PLC, Instrument Cluster Controller.
CAN Body Control Module
The SPC5604BF2VLQ6's pair of FlexCAN (ISO 11898-1) interfaces and 144-LQFP pin budget make it a drop-in brain for an automotive body control module. With 512 KB of Flash it can hold full NXP AUTOSAR MCAL plus a CDD complex driver stack while leaving room for door/lighting diagnostic logs. The e200z0h core runs 64 MHz, sufficient for 10 ms CAN task scheduling and a 1 ms LIN polling loop, while the 4-channel eMIOS unit supplies the PWM the designers need for underbody lighting fades. Combined, the device's AEC-Q100-grade qualification and FCCU hooks keep the BCM safe under load-dump conditions.
Recommandé
Central Gateway Node
In a CAN-LIN gateway the SPC5604BF2VLQ6 acts as a traffic manager between the powertrain CAN bus and multiple LIN subnets. Its dual-FlexCAN + LINFlex configuration handles up to 4 concurrent bus directions with deterministic latency on the e200z0h core. Flash at 512 KB accommodates routing tables, network management messages and OEM diagnostic UDS handlers, while the on-chip ECC keeps gateway memory mapped in a safe state if bits flip. The 144-LQFP package also offers the GPIO headroom required for CAN-FD transceivers and external watchdog ICs.
Recommandé
HVAC Climate Controller
Climate-control modules demand simultaneous temperature acquisition, blower speed PWM and CAN communication with the rest of the vehicle, exactly the workload the SPC5604BF2VLQ6 handles comfortably. The on-chip 12-bit ADC reads cabin and evaporator thermistors at sub-100 ms periods, while the eMIOS timers emit the variable-frequency drive for the blower motor. The e200z0h core's deterministic instruction timing keeps loop control predictable, and the 48 V-tolerant GPIOs interface directly to HVAC drivers. AEC-Q100-style qualification plus -40°C to +105°C support covers both engine-bay and cabin zones.
Recommandé
Automotive Lighting Controller
Adaptive headlight and tail-light modules benefit from the SPC5604BF2VLQ6's mix of multi-channel PWM and CAN/LIN connectivity. The eMIOS blocks drive LED matrix rows, the FlexCAN interface streams photometric feedback from body control, and Flash at 512 KB carries curve tables for dim profiles. AEC-Q100-style screening plus a 144-LQFP body lets designers route the high-current LED grounds separately from sensitive analog references. Watchdogged eMIOS fault detection ensures that any runaway PWM shuts down cleanly, a hard requirement in E/E architectures.
Recommandé
Industrial CAN Node / PLC
Outside the car, the SPC5604BF2VLQ6 slots into industrial CANopen and DeviceNet nodes where -40°C to +105°C operation and a deterministic e200z0h core matter. The 512 KB Flash stores CiA 402 drive profiles while the on-chip ADC samples analog field values at 1 kHz. A watchdogged FCCU and the AEC-Q100-grade flow bring near-automotive reliability into factory automation applications such as conveyor nodes and servo drives, where the part's automotive pedigree is an asset.
Recommandé
Instrument Cluster Controller
Mid-range instrument clusters combine CAN message handling, gauge-sweep PWM and ISO 9141 diagnostics - all roles the SPC5604BF2VLQ6 fulfils in a single chip. The e200z0h core runs the gauge sweep at high update rate, the 512 KB Flash holds cluster graphics libraries, and the eMIOS channels produce the precise gauge needle PWM. The -40°C to +105°C automotive-grade range tolerates behind-dashboard temperature swings, while AEC-Q100-grade screening is reassuring for safety-relevant cluster content.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour SPC5604BF2VLQ6 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | SPC5604BF2VLL6 | SPC5604BF2VLL6R | SPC5604CF2MLQ6 | SPC5603BF2MLQ6 | SPC5644AF0MLU2 |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20mm) | 144-LQFP (20x20mm) - same | 144-LQFP (20x20mm) - same | 144-LQFP (20x20mm) - same | 144-LQFP (20x20mm) - same | 176-LQFP (different body, not drop-in) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| CPU Core | e200z0h (32-bit Power Arch) | e200z0h (32-bit Power Arch) | e200z0h (32-bit Power Arch) | e200z0h (32-bit Power Arch) | e200z0h (32-bit Power Arch) | e200z4 (32-bit Power Arch, dual-issue) |
| Maximum CPU Frequency | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 120-150 MHz (higher-performance tier) |
| Program Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | lower Flash count (~384 KB) | higher Flash count (1.5 MB+) |
| Automotive Temperature Grade | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +125C (Grade 1) |
| FlexCAN Modules | 2 | 2 | 2 | 2-3 (family-dependent) | 2 | 3-5 (gateway tier) |
| LINFlex Channels | Multiple | Multiple | Multiple | Multiple | Multiple | Multiple |
Principaux différenciateurs
- Best-in-class pin budget in the MPC560xB tier for body controllers (vs SPC5602BF2MLL6 (100-LQFP))
- Pin-compatible with same-family higher-tier MPUs (vs SPC5644AF0MLU2 (176-LQFP upgrade))
- Lower-cost than SPC5644AF0MLU2 gateway MCU (vs SPC5644AF0MLU2)
- Long-term automotive-grade supply continuity from NXP (vs generic 32-bit automotive Cortex MCU)
Notes de conception
Place a 100 nF X7R ceramic decoupling capacitor within 2 mm of each VDD/VSS pair on the SPC5604BF2VLQ6's 144-LQFP land pattern, and one bulk 4.7 uF tantalum or polymer on the analog supply (VDDA/VSSA, pins 143/144). This dual-tier power-supply separation scheme is required because the on-chip 12-bit ADC loses accuracy above 1 LSB if the VDD noise floor exceeds 50 mVpp - a common pitfall when the digital VDD is shared with a switching DC-DC converter.
Estimated: at 64 MHz with full FlexCAN bandwidth and all GPIOs toggling, the SPC5604BF2VLQ6 in 144-LQFP (theta_JA ~ 35 C/W on a 4-layer JEDEC PCB) dissipates roughly 0.6-0.9 W. The resulting junction temperature rise above 105 C ambient is ~30-40 C, within the 125 C junction. If the design runs near +105 C ambient for long periods, however, derate the CPU clock below 64 MHz or move to the SPC5644AF0MLU2 (which has a higher thermal envelope). Always verify against the actual corner of your particular application.
Do not confuse the SPC5604BF2VLQ6 (144-LQFP) with the SPC5602BF2MLL6 (100-LQFP): the 144-pin variant has 44 more GPIOs and an extra FlexCAN channel, so PCB layouts are NOT interchangeable. Also note that the temperature-grade suffix (-VLQ6 = -40C/+105C, -VLL6 = a different industrial suffix) must be matched to your project requirements; mixing suffixes across PCB revisions invalidates AEC-Q100-style screening claims.
The 144-LQFP body has a 0.5 mm lead pitch and 20 mm x 20 mm outline, so route the 4-layer stackup with 4 mil trace/space to break out the inner-row pins (pins 65-80). Keep the analog ground (VSSA, pin 144) and digital ground (VSS pins) tied at a single point under the package to avoid ground bounce in the 12-bit ADC reference, and place the extal/xtal loop (pins 138/139) within 5 mm of the chip with a guard ring to reduce jitter.
Informations de conformité
Automotive-grade per NXP MPC5604B product family datasheet. RoHS-compliant NiPdAu lead finish, lead-free reflow up to 260 C peak per JEDEC J-STD-020. AEC-Q100 Grade 2 (operating -40C to +105C) per NXP reliability monitor.