STMicroelectronics

STM32L031G4U6 - 32MHz Cortex-M0+ 16KB MCU | STMicroelectronics

MPN: STM32L031G4U6 ✓ Aktif
28-pin UFQFPN, 4 x 4 mm Package 32 MHz Speed 16KB (16K x 8) Memory
MOQ: 1 |

STM32L031G4U6 Ringkasan

STMicroelectronics STM32L031G4U6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating at 32 MHz, with 16KB of Flash and a 28-pin UFQFPN package measuring 4 x 4 mm. It belongs to the STM32L031x4/6 access-line family, combining a compact footprint with embedded control, low-power operation and mixed-signal connectivity.

A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals and communication interfaces on one die. The STM32L031G4U6 occupies the hierarchy Arm Cortex-M0+ core > 32-bit microcontroller > embedded MCU > semiconductor. Its ultra-low-power positioning makes it suitable for compact battery-operated equipment, while its 32 MHz processing rate supports responsive control tasks and common embedded peripherals.

Three headline features define this device: a 32 MHz Arm Cortex-M0+ core, 16KB of Flash organized as 16K x 8, and a 28-pin 4 x 4 mm UFQFPN package. The STM32L031x4/6 family supports low-power-oriented embedded designs without requiring a large-package microcontroller. The 28-pin package also limits board area, although exposed-pad construction and thermal layout must be handled correctly during layout.

The Cortex-M0+ architecture provides a 32-bit instruction set and an efficient interrupt-driven execution model. This helps balance processing performance against current consumption in duty-cycled products. The target belongs to STMicroelectronics' access line, which is intended to provide essential microcontroller capabilities without the resource requirements of higher-end STM32 families.

Typical applications include compact sensor nodes, industrial condition-monitoring terminals, low-power data loggers, small motor-control boards, battery-powered accessories and embedded control modules. Its small package is especially useful where board area is limited, while the 32 MHz operating frequency supports control loops, serial communications and supervisory functions.

PCB implementation should follow the manufacturer's pinout and land-pattern guidance, including treatment of the exposed ground pad and thermal-via arrangement. Firmware decisions should also account for the difference between the STM32L031x4 and STM32L031x6 density variants rather than assuming that every memory and peripheral feature is identical.

This page combines manufacturer-device positioning, exact orderable-part information, sourcing guidance, application fit and design-oriented cautions. It distinguishes known electrical facts from parameters that must be confirmed in the complete manufacturer datasheet before layout, qualification or production release.

Alternatif penggantian untuk STM32L031G4U6 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian STM32L031G4U6 (sama faktor bentuk dan footprint) — berbeda di dalam Flash Memory, Maximum CPU Frequency, Product Type, ADC.

STMicroelectronics
Flash Memory: 16 KB
Maximum CPU Frequency: 64 MHz
Product Type: 32-bit ARM Cortex-M0+ microcontroller
Bandingkan dengan STM32L031G4U6 →
STMicroelectronics
Flash Memory: 32 KB
ADC: Available
Bandingkan dengan STM32L031G4U6 →

STM32L031G6U7

✅ Drop-In
STMicroelectronics
📦 28-pin UFQFPN (4 x 4 mm)
32-bit ultra-low-power microcontroller · Arm Cortex-M0+ · 32-bit RISC · 32 MHz · 32 KB · 8 KB · 21 pins · 28-pin UFQFPN, 4 x 4 mm

Kontak untuk harga

Lihat Datasheet →

STM32L031G4

✅ Drop-In
📦 28-pin UFQFPN (4 x 4 mm)
Same STM32L031G4 family and 32 MHz Cortex-M0+ core; temperature, flash option and ordering suffix must be matched.

📋 Alternatif referensi (tidak dalam katalog)

STM32L031G4U6TR

✅ Drop-In
📦 28-pin UFQFPN (4 x 4 mm)
Same electrical device and UFQFPN land pattern; tape-and-reel shipping format differs from the non-TR orderable code.

📋 Alternatif referensi (tidak dalam katalog)

STM32G031G4U6

✅ Drop-In
STMicroelectronics
📦 28-pin UFQFPN (4 x 4 mm)
32-bit ARM Cortex-M0+ microcontroller · 64 MHz · 16 KB · 8 KB · 32-bit RISC · Arm Cortex-M0+ · 1.7 V to 3.6 V · 2

Kontak untuk harga

Lihat Datasheet →

STM32G0C1KEU6N

✅ Drop-In
📦 28-pin UFQFPN (4 x 4 mm)
Uses the 64 MHz Cortex-M0+ platform versus 32 MHz for the target, with substantially different memory density and I/O resources.

📋 Alternatif referensi (tidak dalam katalog)

STM32L031G4U6 Rating Maksimal & Karakteristik Listrik

Product Type 32-bit ultra-low-power microcontroller
Processor Core Arm Cortex-M0+
Maximum CPU Frequency 32 MHz
Flash Memory 16KB (16K x 8)
Paket 28-pin UFQFPN, 4 x 4 mm
Tipe Mounting Surface mount
Program Memory Type Flash
Core Architecture 32-bit RISC
Qualification Status Active product family

STM32L031G4U6 28-pin ufqfpn, 4 x 4 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk STM32L031G4U6 (28-pin ufqfpn, 4 x 4 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 28-pin ufqfpn, 4 x 4 mm untuk STM32L031G4U6

Tidak ada data diatribut pin yang tersedia untuk STM32L031G4U6.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

STM32L031G4U6 cocok untuk 6 aplikasis: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Compact Data Loggers, Small Motor-Control Modules, Low-Power Access-Control Terminals, Smart IoT Sensor Hubs.

🧩

Battery-Powered Sensor Nodes

The STM32L031G4U6 fits compact sensor nodes because its Arm Cortex-M0+ core operates at 32 MHz while the STM32L031x4/6 family is positioned for ultra-low-power operation. The microcontroller can acquire sensor data, apply filtering and control a radio or wired communications interval before returning to a low-power state. Its 16KB of Flash supports compact firmware, while the 28-pin 4 x 4 mm UFQFPN package preserves board area. Energy performance still depends on the selected sleep mode, active duty cycle, sensor load and external regulator efficiency.

🏭

Industrial Condition Monitoring

STM32L031G4U6 is appropriate for industrial condition-monitoring modules that measure vibration, temperature or equipment state and transmit summarized data. Its 32 MHz Cortex-M0+ core provides enough responsiveness for interrupt-driven sampling, filtering and diagnostics, while 16KB of Flash supports a compact application. The 28-pin UFQFPN package limits PCB area in distributed sensor modules. A robust production design should add brownout, watchdog and ESD strategy at the board level and verify the operating-temperature grade against the deployment environment.

📟

Compact Data Loggers

The STM32L031G4U6 can serve as the control core of a compact data logger that timestamps sensor readings and stores or transmits them periodically. Its 32 MHz Arm Cortex-M0+ processor handles buffering, packet preparation and low-power duty cycling, while the 16KB Flash footprint suits a focused firmware image. The 4 x 4 mm package is valuable when the battery, memory card interface and radio must fit on a small board. Storage endurance, write-cycle management and data-loss recovery should be evaluated in firmware before field deployment.

⚙️

Small Motor-Control Modules

The STM32L031G4U6 is suitable for supervisory and low-complexity motor-control functions in compact modules. The 32 MHz Cortex-M0+ core can execute timing-critical control tasks, monitor inputs and manage protection signals through its GPIO and timer resources. Its 28-pin UFQFPN package allows the controller to coexist with driver circuitry on a small board. Final suitability depends on motor current, switching frequency, isolation and thermal requirements, which often need a dedicated gate driver and power stage beyond the microcontroller package.

🔐

Low-Power Access-Control Terminals

STM32L031G4U6 can control compact access terminals that read credentials, operate a local lock or relay and report activity over a serial interface. Its 32 MHz Cortex-M0+ core provides responsive event handling, and the 16KB Flash is adequate for a focused control application. The small UFQFPN package helps reduce terminal size. Security-sensitive designs should use secure boot, key protection and authenticated update mechanisms, while debounce, lockout and fail-safe behavior are implemented according to the mechanical and electrical requirements of the lock interface.

🌐

Smart IoT Sensor Hubs

The STM32L031G4U6 is well suited to small IoT sensor hubs that aggregate digital and analog inputs before forwarding normalized data. Its 32 MHz Cortex-M0+ core supports protocol handling and local filtering, while the STM32L031x4/6 family's low-power focus is useful in battery or energy-harvested installations. The 28-pin package reduces routing pressure, but designers should confirm available I/O count and analog resources in the complete datasheet. A production hub also needs stable clocking, brownout handling, firmware update strategy and careful separation of sensitive measurement and communications paths.

What are the key specifications of STM32L031G4U6 that engineers should know?
The STM32L031G4U6 is an ultra-low-power 32-bit microcontroller built around an Arm Cortex-M0+ core operating at 32 MHz. It provides 16KB of Flash, a 28-pin UFQFPN package and a compact 4 x 4 mm footprint. STMicroelectronics identifies the device as part of the STM32L031x4/6 access-line family. Confirm RAM, GPIO, analog and timing details in the complete manufacturer datasheet before finalizing a schematic.
What is the STM32L031G4U6 and what is it used for?
The STM32L031G4U6 is a compact, ultra-low-power 32-bit microcontroller intended for embedded control and communication tasks. Its Arm Cortex-M0+ core runs at 32 MHz and includes 16KB of Flash, while the package occupies only 4 x 4 mm. It is suitable for sensor nodes, condition-monitoring equipment, small data loggers, battery-powered accessories and compact industrial control modules.
Where can I download the STM32L031G4U6 datasheet PDF?
The official STM32L031G4 family product page is the appropriate starting point for the manufacturer datasheet, package information and supporting documents. The page is located at https://www.st.com/en/microcontrollers-microprocessors/stm32l031g4.html. Use the exact STM32L031G4U6 ordering information to confirm density, temperature and package options, and consult the pin-description table before assigning PCB tracks.
Where can I find the STM32L031G4U6 pinout and land pattern?
The STM32L031G4U6 pinout is a 28-pin UFQFPN arrangement, but the complete numbered pin table is not reproduced on this page. Use the STM32L031G4 manufacturer's datasheet and package drawing to identify every power, ground, GPIO, reset and peripheral signal. The exposed-pad requirements, solder mask, land pattern and thermal-via arrangement must also follow those manufacturer documents.
Is the STM32L031G4U6 suitable for battery-powered sensor applications?
Yes, the STM32L031G4U6 is suitable for battery-powered sensor applications because STMicroelectronics positions the STM32L031x4/6 family as an ultra-low-power access-line MCU. Its 32 MHz Cortex-M0+ core provides adequate control performance, while low-power operating modes can reduce energy use during idle periods. Final battery life depends on the selected sleep mode, sensor duty cycle, regulator efficiency and peripheral activity.
STM32L031G4U6 vs STM32L031G6 - which is better for a compact design?
The STM32L031G4U6 and STM32L031G6 belong to the same STM32L031x4/6 family, but they should not be treated as identical without checking the exact density variant. The verified ordering information identifies the target as a 16KB-Flash STM32L031G4 device. Choose the family member whose memory, peripherals and temperature grade match the design rather than relying on the shared 32 MHz Cortex-M0+ platform alone.
When should I choose the STM32L031G4U6 instead of a larger STM32 microcontroller?
Choose the STM32L031G4U6 when the design needs a 32 MHz Cortex-M0+ core, 16KB of Flash and a compact 4 x 4 mm package but does not require the memory, GPIO count or peripheral set of a larger STM32 device. It is a strong fit for small, low-power control products. Select a higher-density or more highly connected MCU if future firmware growth, pins or advanced peripherals would exceed the target's resources.
What can replace the STM32L031G4U6?
The closest replacements are parts in the STM32L031x4/6 family or closely related STM32 devices that preserve the UFQFPN footprint and provide adequate memory, clock and peripheral compatibility. The STM32L031G6 is a family-density candidate, but its complete orderable suffix and pin configuration must be checked. A footprint match alone does not guarantee electrical or firmware compatibility, so validate power, clocks, GPIO, debugging and boot behavior.
Can STM32L031G4U6 be replaced by STM32G031G4 without PCB changes?
The STM32G031G4 is not automatically a drop-in replacement for the STM32L031G4U6 because the STM32G0 family operates at up to 64 MHz and may differ in memory, peripherals and power behavior. It can be useful when an existing board footprint is mechanically similar, but engineers must verify every pin, supply requirement, peripheral mapping and boot sequence before considering a substitution.
What is the best cross-brand equivalent for STM32L031G4U6?
A cross-brand equivalent must match the 28-pin 4 x 4 mm footprint and preserve the required GPIO, power, clock, memory and peripheral functions. The available cross-reference results do not establish a qualified cross-brand drop-in device for this exact ordering code. Treat any MCU from another manufacturer as a design migration until its complete pinout, electrical limits, boot behavior and firmware requirements have been verified.
Is the STM32L031G4U6 in stock and what is its lead time?
The STM32L031G4U6 is shown as available by several distribution listings, but stock and lead time can vary by order quantity and packaging suffix. Use the Request a Quote form on this page to request current availability, minimum order quantity and lead time for the exact MPN. The listing results also contain a reel-packed suffix, so confirm whether STM32L031G4U6 itself requires an uncut, tray or another delivery format.
What is the price of STM32L031G4U6?
Current unit pricing for STM32L031G4U6 is best obtained through the Request a Quote form on this page because distributor pricing, currency and quantity breaks change over time. The available listing identifies the component as in stock, but its displayed starting price does not establish a complete quantity-break table for the exact MPN. Submit the required quantity and target packaging in the quote request for a current quotation.
Where can I buy STM32L031G4U6 online?
Use the Request a Quote form on this page to request STM32L031G4U6 from XAIPART. The request should state the required quantity, delivery packaging and destination so the current availability and lead time can be confirmed. STMicroelectronics and authorized distribution listings identify the exact device, but reel-packed ordering codes must not be substituted without confirming the original equipment and assembly requirements.
What tools and firmware support the STM32L031G4U6?
The STM32L031G4U6 uses an Arm Cortex-M0+ core and is supported by the STM32 development ecosystem. Use the STM32CubeMX configuration environment, STM32CubeIDE, ST-LINK debugging tools and the relevant STM32Cube HAL or low-layer drivers. Confirm the exact package, clock configuration, boot pins and peripheral assignments in the STM32L031G4 reference documentation before generating production firmware.
Does the STM32L031G4U6 support RoHS and AEC-Q100 qualification?
The exact RoHS, REACH, lead-free, halogen-free and automotive-qualification status must be confirmed for the STM32L031G4U6 ordering code. The manufacturer family page confirms the device is part of an active ultra-low-power MCU family, but it does not by itself establish every material-compliance declaration. Use the manufacturer product documentation and declaration for the exact package and temperature-grade suffix before releasing an automotive or regulated product.

Data referensi engineering untuk STM32L031G4U6 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the STM32L031G4U6 for a compact, ultra-low-power embedded design that requires an Arm Cortex-M0+ core at 32 MHz, 16KB of Flash and a 28-pin 4 x 4 mm UFQFPN footprint. Select STM32L031G6 when a higher-density member of the same STM32L031x4/6 family matches the required memory and peripheral set. Use STM32L031G4U6TR only when tape-and-reel delivery is required for the same electrical platform. Consider STM32G031G4 when its 64 MHz performance is useful, accepting that peripheral availability, clocking and firmware configuration must be reviewed. STM32G0C1KEU6N provides a much larger 512KB Flash configuration but is a broader platform change with different resource and peripheral requirements. For all options, verify the exact package drawing, pin mapping, electrical limits, boot behavior, software support and qualification before approving a drop-in replacement.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini STM32L031G6 STM32L031G4 STM32L031G4U6TR STM32G031G4 STM32G0C1KEU6N
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 28-pin UFQFPN (4 x 4 mm) 28-pin UFQFPN (4 x 4 mm) 28-pin UFQFPN (4 x 4 mm) 28-pin UFQFPN (4 x 4 mm) 28-pin UFQFPN (4 x 4 mm) 28-pin UFQFPN (4 x 4 mm)
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 64 MHz 64 MHz
Product Family STM32L031x4/6 ultra-low-power access line STM32L031x4/6 STM32L031x4/6 STM32L031x4/6 STM32G031x4/x6/x8 STM32G0C1
Ordering and Packaging STM32L031G4U6 Family-level ordering code; suffix must be selected Family-level ordering code; suffix must be selected Tape-and-reel ordering variant Family-level ordering code; suffix must be selected Complete ordering code with N suffix

Diferensiator Kunci

  • Compact 4 x 4 mm MCU footprint (vsSTM32G0C1KEU6N)
  • 16 MHz lower maximum clock than the STM32G0 alternative (vsSTM32G031G4)
  • Direct family continuity (vsSTM32L031G6)
  • Identifiable 16KB Flash configuration (vsSTM32G0C1KEU6N)

Catatan Desain

Use the STM32L031G4 manufacturer package drawing for the 28-pin UFQFPN land pattern, solder mask and copper-pad geometry. Treat the exposed pad as a thermal and electrical connection according to the datasheet rather than as an optional footprint feature. Place all decoupling capacitors directly beside their corresponding supply pins, keep the exposed-pad vias within the recommended pattern and verify the board outline against the exact orderable suffix.

The 32 MHz Cortex-M0+ core and 16KB Flash identify this as a compact MCU, but the complete operating-voltage and current limits must be confirmed in the manufacturer datasheet. Select a regulator with appropriate startup, transient response and output-noise characteristics, and ensure every supply rail remains within its specified range during clock changes, peripheral activity and debug sessions. Do not infer current consumption from the CPU frequency alone.

Do not substitute a different STM32L031 density grade, reel suffix or STM32G0 device solely because the package appears similar. Verify GPIO mapping, memory density, ADC channels, timers, clock limits, debug interface, boot configuration and exposed-pad connections. After substitution, rerun clock, peripheral, brownout and low-power tests because a mechanical pin fit does not establish firmware or electrical equivalence.

Separate analog inputs, oscillator or clock circuitry, debug connections and switching-power paths according to the datasheet pin definitions and application guidance. Keep high-current return paths out of the MCU ground region and use a continuous ground reference beneath the device. For communication or sensor interfaces, route sensitive traces away from fast switching nodes and provide local return paths to reduce coupled noise and ground bounce.

Validate the complete orderable identity before releasing a BOM: STM32L031G4U6 and STM32L031G4U6TR represent different delivery formats even though the electrical platform is related. Confirm temperature grade, Flash density, package, tape-and-reel or tray requirement and marking requirements. For production continuity, document these fields so purchasing and assembly teams do not interchange packing codes unintentionally.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The exact ordering code's material-compliance and automotive declarations were not identified in the retrieved manufacturer and distributor information. Confirm the relevant declarations with STMicroelectronics for the selected package and temperature-grade suffix.

Data disahkan pada: 2026-11-19 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

STM32L031G4U6 datasheet STM32L031G4U6 pinout STM32L031G4U6 datasheet pdf STM32L031G4U6 equivalent STM32L031G4U6 replacement STM32L031G4U6 cross reference STM32L031G4U6 price STM32L031G4U6 stock STM32L031G4U6 footprint STM32L031G4U6 schematic STM32L031G4 32MHz microcontroller STM32L031G4U6 vs STM32L031G6 STMicroelectronics STM32L031G4U6 STM32L031G4 UFQFPN pinout STM32L031G4 battery powered sensor

Komponen dan Istilah Terkait

STMicroelectronics STM32L031G4U6 STM32L031G4 STM32L031G6 STM32L031G4U6TR STM32G031G4 STM32G0C1KEU6N Arm Cortex-M0+ 32-bit microcontroller embedded MCU ultra-low-power MCU STM32L031x4/6 16KB Flash 32 MHz 28-pin UFQFPN 4 x 4 mm package QFN family surface-mount package RISC sensor node condition monitoring industrial control battery-powered electronics STM32CubeMX embedded firmware
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ