STM32L031G4U6 - 32MHz Cortex-M0+ 16KB MCU | STMicroelectronics
MPN: STM32L031G4U6 ✓ 啟用中STM32L031G4U6 概覽
A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals and communication interfaces on one die. The STM32L031G4U6 occupies the hierarchy Arm Cortex-M0+ core > 32-bit microcontroller > embedded MCU > semiconductor. Its ultra-low-power positioning makes it suitable for compact battery-operated equipment, while its 32 MHz processing rate supports responsive control tasks and common embedded peripherals.
Three headline features define this device: a 32 MHz Arm Cortex-M0+ core, 16KB of Flash organized as 16K x 8, and a 28-pin 4 x 4 mm UFQFPN package. The STM32L031x4/6 family supports low-power-oriented embedded designs without requiring a large-package microcontroller. The 28-pin package also limits board area, although exposed-pad construction and thermal layout must be handled correctly during layout.
The Cortex-M0+ architecture provides a 32-bit instruction set and an efficient interrupt-driven execution model. This helps balance processing performance against current consumption in duty-cycled products. The target belongs to STMicroelectronics' access line, which is intended to provide essential microcontroller capabilities without the resource requirements of higher-end STM32 families.
Typical applications include compact sensor nodes, industrial condition-monitoring terminals, low-power data loggers, small motor-control boards, battery-powered accessories and embedded control modules. Its small package is especially useful where board area is limited, while the 32 MHz operating frequency supports control loops, serial communications and supervisory functions.
PCB implementation should follow the manufacturer's pinout and land-pattern guidance, including treatment of the exposed ground pad and thermal-via arrangement. Firmware decisions should also account for the difference between the STM32L031x4 and STM32L031x6 density variants rather than assuming that every memory and peripheral feature is identical.
This page combines manufacturer-device positioning, exact orderable-part information, sourcing guidance, application fit and design-oriented cautions. It distinguishes known electrical facts from parameters that must be confirmed in the complete manufacturer datasheet before layout, qualification or production release.
直接替換替代品,適用於 STM32L031G4U6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32L031G4U6 (相同外形與佔位) — 差異在於 Flash Memory, Maximum CPU Frequency, Product Type, ADC.
STM32L031G6U7
✅ 直接替換聯絡詢價
查看資料表 →STM32L031G4
✅ 直接替換📋 參考替代品(不在目錄中)
STM32L031G4U6TR
✅ 直接替換📋 參考替代品(不在目錄中)
STM32G031G4U6
✅ 直接替換聯絡詢價
查看資料表 →STM32G0C1KEU6N
✅ 直接替換📋 參考替代品(不在目錄中)
STM32L031G4U6 最大額定值與電氣特性
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16KB (16K x 8) |
| 封裝 | 28-pin UFQFPN, 4 x 4 mm |
| 安裝類型 | Surface mount |
| Program Memory Type | Flash |
| Core Architecture | 32-bit RISC |
| Qualification Status | Active product family |
STM32L031G4U6 28-pin ufqfpn, 4 x 4 mm 腳位配置指南
STM32L031G4U6(28-pin ufqfpn, 4 x 4 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32L031G4U6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32L031G4U6 適用於 6 應用s: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Compact Data Loggers, Small Motor-Control Modules, Low-Power Access-Control Terminals, Smart IoT Sensor Hubs.
Battery-Powered Sensor Nodes
The STM32L031G4U6 fits compact sensor nodes because its Arm Cortex-M0+ core operates at 32 MHz while the STM32L031x4/6 family is positioned for ultra-low-power operation. The microcontroller can acquire sensor data, apply filtering and control a radio or wired communications interval before returning to a low-power state. Its 16KB of Flash supports compact firmware, while the 28-pin 4 x 4 mm UFQFPN package preserves board area. Energy performance still depends on the selected sleep mode, active duty cycle, sensor load and external regulator efficiency.
推薦
Industrial Condition Monitoring
STM32L031G4U6 is appropriate for industrial condition-monitoring modules that measure vibration, temperature or equipment state and transmit summarized data. Its 32 MHz Cortex-M0+ core provides enough responsiveness for interrupt-driven sampling, filtering and diagnostics, while 16KB of Flash supports a compact application. The 28-pin UFQFPN package limits PCB area in distributed sensor modules. A robust production design should add brownout, watchdog and ESD strategy at the board level and verify the operating-temperature grade against the deployment environment.
推薦
Compact Data Loggers
The STM32L031G4U6 can serve as the control core of a compact data logger that timestamps sensor readings and stores or transmits them periodically. Its 32 MHz Arm Cortex-M0+ processor handles buffering, packet preparation and low-power duty cycling, while the 16KB Flash footprint suits a focused firmware image. The 4 x 4 mm package is valuable when the battery, memory card interface and radio must fit on a small board. Storage endurance, write-cycle management and data-loss recovery should be evaluated in firmware before field deployment.
推薦
Small Motor-Control Modules
The STM32L031G4U6 is suitable for supervisory and low-complexity motor-control functions in compact modules. The 32 MHz Cortex-M0+ core can execute timing-critical control tasks, monitor inputs and manage protection signals through its GPIO and timer resources. Its 28-pin UFQFPN package allows the controller to coexist with driver circuitry on a small board. Final suitability depends on motor current, switching frequency, isolation and thermal requirements, which often need a dedicated gate driver and power stage beyond the microcontroller package.
推薦
Low-Power Access-Control Terminals
STM32L031G4U6 can control compact access terminals that read credentials, operate a local lock or relay and report activity over a serial interface. Its 32 MHz Cortex-M0+ core provides responsive event handling, and the 16KB Flash is adequate for a focused control application. The small UFQFPN package helps reduce terminal size. Security-sensitive designs should use secure boot, key protection and authenticated update mechanisms, while debounce, lockout and fail-safe behavior are implemented according to the mechanical and electrical requirements of the lock interface.
推薦
Smart IoT Sensor Hubs
The STM32L031G4U6 is well suited to small IoT sensor hubs that aggregate digital and analog inputs before forwarding normalized data. Its 32 MHz Cortex-M0+ core supports protocol handling and local filtering, while the STM32L031x4/6 family's low-power focus is useful in battery or energy-harvested installations. The 28-pin package reduces routing pressure, but designers should confirm available I/O count and analog resources in the complete datasheet. A production hub also needs stable clocking, brownout handling, firmware update strategy and careful separation of sensitive measurement and communications paths.
推薦
推薦產品摘要
工程參考資料,適用於 STM32L031G4U6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32L031G6 | STM32L031G4 | STM32L031G4U6TR | STM32G031G4 | STM32G0C1KEU6N |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 28-pin UFQFPN (4 x 4 mm) | 28-pin UFQFPN (4 x 4 mm) | 28-pin UFQFPN (4 x 4 mm) | 28-pin UFQFPN (4 x 4 mm) | 28-pin UFQFPN (4 x 4 mm) | 28-pin UFQFPN (4 x 4 mm) |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 64 MHz | 64 MHz |
| Product Family | STM32L031x4/6 ultra-low-power access line | STM32L031x4/6 | STM32L031x4/6 | STM32L031x4/6 | STM32G031x4/x6/x8 | STM32G0C1 |
| Ordering and Packaging | STM32L031G4U6 | Family-level ordering code; suffix must be selected | Family-level ordering code; suffix must be selected | Tape-and-reel ordering variant | Family-level ordering code; suffix must be selected | Complete ordering code with N suffix |
主要差異化特點
- Compact 4 x 4 mm MCU footprint (對比STM32G0C1KEU6N)
- 16 MHz lower maximum clock than the STM32G0 alternative (對比STM32G031G4)
- Direct family continuity (對比STM32L031G6)
- Identifiable 16KB Flash configuration (對比STM32G0C1KEU6N)
設計說明
Use the STM32L031G4 manufacturer package drawing for the 28-pin UFQFPN land pattern, solder mask and copper-pad geometry. Treat the exposed pad as a thermal and electrical connection according to the datasheet rather than as an optional footprint feature. Place all decoupling capacitors directly beside their corresponding supply pins, keep the exposed-pad vias within the recommended pattern and verify the board outline against the exact orderable suffix.
The 32 MHz Cortex-M0+ core and 16KB Flash identify this as a compact MCU, but the complete operating-voltage and current limits must be confirmed in the manufacturer datasheet. Select a regulator with appropriate startup, transient response and output-noise characteristics, and ensure every supply rail remains within its specified range during clock changes, peripheral activity and debug sessions. Do not infer current consumption from the CPU frequency alone.
Do not substitute a different STM32L031 density grade, reel suffix or STM32G0 device solely because the package appears similar. Verify GPIO mapping, memory density, ADC channels, timers, clock limits, debug interface, boot configuration and exposed-pad connections. After substitution, rerun clock, peripheral, brownout and low-power tests because a mechanical pin fit does not establish firmware or electrical equivalence.
Separate analog inputs, oscillator or clock circuitry, debug connections and switching-power paths according to the datasheet pin definitions and application guidance. Keep high-current return paths out of the MCU ground region and use a continuous ground reference beneath the device. For communication or sensor interfaces, route sensitive traces away from fast switching nodes and provide local return paths to reduce coupled noise and ground bounce.
Validate the complete orderable identity before releasing a BOM: STM32L031G4U6 and STM32L031G4U6TR represent different delivery formats even though the electrical platform is related. Confirm temperature grade, Flash density, package, tape-and-reel or tray requirement and marking requirements. For production continuity, document these fields so purchasing and assembly teams do not interchange packing codes unintentionally.
合規資訊
The exact ordering code's material-compliance and automotive declarations were not identified in the retrieved manufacturer and distributor information. Confirm the relevant declarations with STMicroelectronics for the selected package and temperature-grade suffix.