STMicroelectronics

STM32L151RBH6 - 32MHz Cortex-M3 128KB MCU | STMicroelectronics

MPN: STM32L151RBH6 ✓ Aktif
3 V Vdss 64-TFBGA, 5 x 5 mm Package 32 MHz Speed 128 KB Memory
MOQ: 1 |

STM32L151RBH6 Ringkasan

The STMicroelectronics STM32L151RBH6 is an ultra-low-power 32-bit microcontroller with an ARM Cortex-M3 core, 32 MHz operating frequency, 128 KB Flash memory, and a 64-TFBGA 5 x 5 mm package. It combines USB connectivity and low-power operation for compact embedded systems.

An ultra-low-power microcontroller is an embedded semiconductor designed to complete control, communication, and data-acquisition tasks while minimizing energy consumption. The STM32L1 family belongs to the microcontroller hierarchy, combining an ARM Cortex-M3 processor core with Flash memory, SRAM, EEPROM, communication peripherals, analog converters, and security features. This combination makes it suitable for battery-powered, portable, industrial, and instrumented products.

The STM32L151RBH6 provides 128 KB of Flash, 32 KB of SRAM, 4 KB of EEPROM, a 32 MHz Cortex-M3 core, and USB connectivity according to the manufacturer datasheet information. Its peripheral set includes LCD support, ADC, and DAC functions, allowing a compact design to combine control logic, analog measurement, waveform generation, and direct USB data exchange.

The Cortex-M3 architecture provides a 32-bit instruction set while retaining an efficient embedded-control architecture. Operating at 32 MHz, or 33.3 DMIPS as identified in the product comparison data, the device provides deterministic processing for protocol handling, peripheral management, and user-interface logic. Low-power operating modes are especially important when the same controller must alternate between active processing, low-power monitoring, and reduced-communication states.

Typical uses include USB-connected sensors, portable measurement instruments, compact industrial controllers, medical monitoring equipment, and low-power data loggers. In a sensor node, the MCU can sample analog channels with its ADC, store local information in EEPROM, and transmit results through USB when connected. In a portable instrument, its LCD interface, DAC, and low-power profile support compact user-facing designs without requiring a separate host processor.

PCB design should preserve the exact 64-TFBGA land pattern, power distribution, and decoupling arrangement specified by STMicroelectronics. Place each supply capacitor close to its associated device pin, maintain the required power and ground connectivity, and follow the package-specific assembly and layout recommendations. Confirm USB impedance and signal-routing guidance before releasing a high-volume layout.

This product record combines the official STM32L151RB family information with distributor and cross-reference findings. It also organizes package, application, replacement, and selection guidance so engineers can identify a verified same-package alternative or determine when redesigning to another STM32 variant is more appropriate than treating a functional equivalent as a drop-in replacement.

Alternatif penggantian untuk STM32L151RBH6 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

STM32L152RBH6

✅ Drop-In
📦 64-TFBGA (5x5)
Adds hardware cryptographic capability while retaining the 32 MHz Cortex-M3 core and 128 KB Flash configuration; 0% difference in the stated core frequency and Flash capacity

📋 Alternatif referensi (tidak dalam katalog)

STM32L151RBH6 Rating Maksimal & Karakteristik Listrik

Product Type Ultra-low-power 32-bit microcontroller
Processor Core Arm Cortex-M3
CPU Architecture 32-bit
Maximum CPU Frequency 32 MHz
Peak Performance 33.3 DMIPS
Flash Memory 128 KB
SRAM 32 KB
EEPROM 4 KB
Tegangan Pemuat 3 V
Connectivity USB
Analog Peripherals ADC and DAC
Display Support LCD interface
Paket 64-TFBGA, 5 x 5 mm
Tipe Mounting Surface mount

STM32L151RBH6 64-tfbga, 5 x 5 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk STM32L151RBH6 (64-tfbga, 5 x 5 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 64-tfbga, 5 x 5 mm untuk STM32L151RBH6

Tidak ada data diatribut pin yang tersedia untuk STM32L151RBH6.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

STM32L151RBH6 cocok untuk 6 aplikasis: USB-Connected Portable Sensor Node, Compact Industrial Data Logger, Battery-Powered Medical Monitoring Device, USB Test and Measurement Instrument, USB Security and Access Controller, Low-Power Data Acquisition Controller.

🧩

USB-Connected Portable Sensor Node

The STM32L151RBH6 fits a portable sensor node because it combines a 32 MHz Arm Cortex-M3 core with USB connectivity, 128 KB Flash, 32 KB SRAM, and 4 KB EEPROM. The microcontroller can acquire sensor data, apply local filtering, retain calibration or event data in EEPROM, and present the results through USB when a host connection is made. Its 3 V supply and ultra-low-power family positioning are useful for portable instruments, although the final battery budget must include active and sleep-state current, USB transceiver behavior, and the external sensor load.

🏭

Compact Industrial Data Logger

The STM32L151RBH6 is appropriate for a compact industrial data logger that records periodic sensor readings and transfers them to a host. Its 128 KB Flash provides embedded program and nonvolatile storage capacity, while 32 KB SRAM supports buffering and protocol handling. The ADC supports analog measurement and the USB interface can simplify direct connection to a service computer. For factory use, the design should include industrial I/O conditioning, ESD protection, and a power architecture that accommodates transient industrial supply conditions.

💊

Battery-Powered Medical Monitoring Device

The STM32L151RBH6 can serve as the control hub in a battery-powered medical monitoring product that combines sensor acquisition, local status indication, and wired configuration. Its 32 MHz Cortex-M3 processor can manage sampling schedules and data processing, the ADC can read analog sensor signals, and USB can support isolated charging or data-transfer interfaces when implemented safely. Medical designs require appropriate clinical isolation, leakage-current analysis, protection barriers, and validation of all safety-related behavior; the MCU selection alone does not establish regulatory compliance.

🖥️

USB Test and Measurement Instrument

The STM32L151RBH6 fits a compact USB test and measurement instrument requiring local computation and host connectivity. Its 32 MHz Cortex-M3 core can execute measurement control, the ADC can acquire analog inputs, and the DAC can generate test waveforms or reference levels. USB provides a practical interface for configuration, captured data, and firmware maintenance. The 64-TFBGA 5 x 5 mm package supports compact board layouts, although fine-pitch assembly and test access must be considered during product planning.

🔒

USB Security and Access Controller

The STM32L151RBH6 can be used in a USB-connected access or security peripheral when the design requires USB communication, event processing, and control of local outputs. The 32 MHz Cortex-M3 core handles protocol tasks and application logic, while Flash stores firmware and 4 KB EEPROM can retain configuration or audit-related parameters. Security implementations should use authenticated firmware procedures, protected keys, appropriate reset behavior, and event logging. For designs requiring hardware cryptographic acceleration, evaluate STM32L152RBH6 instead.

⚡

Low-Power Data Acquisition Controller

The STM32L151RBH6 is well matched to a low-power data-acquisition controller that periodically samples sensors, performs local calculations, and stores or transmits results. Its ultra-low-power STM32L1 architecture supports duty-cycled operation, while the 32 MHz Cortex-M3 core provides enough performance for timing, filtering, and communication handling. The ADC supports analog inputs, EEPROM can store calibration parameters, and USB can be enabled for laboratory configuration. Overall battery life depends on the chosen operating mode, sampling interval, external analog circuitry, and regulator efficiency.

What are the key specifications of STM32L151RBH6 that engineers should know?
The STM32L151RBH6 combines a 32 MHz Arm Cortex-M3 core, 128 KB of Flash, 32 KB of SRAM, and 4 KB of EEPROM in a 64-TFBGA package. According to the STMicroelectronics STM32L151RB product page, this is an ultra-low-power STM32L1 microcontroller with USB connectivity. Its ADC, DAC, and LCD-related capabilities make it useful for compact instruments, sensor systems, and portable products requiring more than a basic GPIO controller.
What is the operating voltage and CPU frequency of STM32L151RBH6?
The STM32L151RBH6 operates from a 3 V supply and uses a 32 MHz Arm Cortex-M3 processor core. The product comparison information identifies performance as 33.3 DMIPS at 32 MHz. According to the manufacturer datasheet information, the device belongs to the STM32L1 ultra-low-power family and integrates Flash, SRAM, EEPROM, USB, ADC, DAC, and LCD-related resources.
Where can I download the STM32L151RBH6 datasheet PDF?
The STM32L151RBH6 datasheet can be downloaded from the official STMicroelectronics product page and linked manufacturer datasheet. The document is identified as the STM32L151RB family reference and covers the ultra-low-power Arm Cortex-M3 MCU, including its 128 KB Flash configuration, USB connectivity, analog peripherals, package options, and electrical characteristics. Use the family document when assessing peripheral behavior and pin-level requirements.
Where can I find the STM32L151RBH6 pinout?
The STM32L151RBH6 pinout is defined in the pin-description tables of the STM32L151RB manufacturer datasheet. The device uses a 64-TFBGA 5 x 5 mm package, so its ball assignments cannot be inferred from a generic 64-pin dual in-line package diagram. Use the package drawing and ball-location table when assigning power, ground, reset, clock, USB, analog, and communication signals to the PCB land pattern.
Is STM32L151RBH6 suitable for battery-powered sensor applications?
Yes, the STM32L151RBH6 is suitable for battery-powered sensor applications because it belongs to STMicroelectronics' ultra-low-power STM32L1 family and operates from 3 V. Its 32 MHz Cortex-M3 core can process local control tasks, while the ADC, 4 KB EEPROM, and USB connectivity support measurement, configuration storage, and wired data transfer. Power consumption should be evaluated across each active and low-power mode used by the product.
What is the difference between STM32L151RBH6 and STM32L152RBH6?
The STM32L152RBH6 belongs to the closely related STM32L152 family and retains the 32 MHz Cortex-M3, 128 KB Flash, 64-TFBGA, USB, ADC, and DAC configuration identified in the comparison data. The STM32L152 family adds hardware cryptographic capability relative to STM32L151. Verify the complete pin and peripheral description before treating the two devices as interchangeable in a security-oriented design.
What is the best drop-in replacement for STM32L151RBH6?
STM32L152RBH6 is the closest same-package alternative identified for STM32L151RBH6, with both listed as 32-bit, 32 MHz, 128 KB Flash devices in a 64-TFBGA 5 x 5 mm package. It adds hardware cryptographic capability, so firmware and peripheral use should be reviewed before substitution. Cross-brand alternatives were not established, and related parts with different package sizes are not drop-in replacements.
Can STM32L152RBH6 replace STM32L151RBH6 on the same PCB?
STM32L152RBH6 can serve as a candidate for STM32L151RBH6 because both use the 64-TFBGA 5 x 5 mm package and share the principal 32 MHz Cortex-M3 and 128 KB Flash configuration identified in the comparison information. Before production use, compare the complete STM32L151RB and STM32L152RB pin tables, boot configuration, peripheral availability, and firmware initialization requirements.
When should I choose STM32L151RBH6 over STM32L152RBH6?
Choose STM32L151RBH6 when the design needs USB and an ultra-low-power Cortex-M3 controller but does not require the STM32L152 family's hardware cryptographic capability. Choose STM32L152RBH6 when encrypted communication or secure data handling justifies the additional cryptographic block. Both candidates use the 64-TFBGA 5 x 5 mm package, so the decision should be based on required peripherals and software support rather than footprint size.
Is STM32L151RBH6 the same as STM32L151RBT6?
No. The STM32L151RBH6 is specified in a 64-TFBGA 5 x 5 mm package, whereas the STM32L151RBT6 is a different package option within the STM32L151RB family. Although both may share the 128 KB Flash and 32 MHz Cortex-M3 core, a different package cannot be treated as a drop-in replacement because the PCB land pattern and pin arrangement change.
What are the best GigaDevice alternatives for STM32L151RBH6?
No specific GigaDevice 64-TFBGA device was established as a pin-compatible alternative to STM32L151RBH6. GigaDevice MCU alternatives commonly concern other STM32 families or package variants, and functional equivalence alone does not satisfy drop-in replacement requirements. A valid second source must match the 64-TFBGA 5 x 5 mm land pattern, pin assignments, voltage requirements, memory organization, and essential peripherals.
Where can I buy STM32L151RBH6 online and what is its price?
Use the Request a Quote form on this page to request STM32L151RBH6 pricing, stock, minimum order quantity, and current lead time. The form provides a single channel for a quotation and avoids publishing a stale figure. Engineers should include the exact 64-TFBGA package, target quantity, delivery location, and required production schedule in the request.
How long is the lead time for STM32L151RBH6?
Request the current STM32L151RBH6 lead time through the Request a Quote form on this page. Lead time can depend on order quantity, package allocation, production schedule, and the requested delivery date. Include your forecast quantities and required in-stock date so the commercial response reflects the actual manufacturing plan.
Is STM32L151RBH6 currently in stock?
Current stock for STM32L151RBH6 should be confirmed through the Request a Quote form on this page. The official product page and distributor listings confirm that the device is an active catalog component, but they do not establish a uniform inventory level for every order quantity. Submit the required quantity, packaging preference, and delivery location for an allocation update.
How do USB and analog features affect an STM32L151RBH6 design?
USB provides a wired data path for configuration, logging, firmware update, or direct control, while the ADC and DAC support measurement and signal generation. According to the manufacturer datasheet information, the STM32L151RBH6 includes these functions together with LCD support. Keep USB routing controlled, provide the required decoupling, and reserve firmware resources for USB and analog calibration.

Data referensi engineering untuk STM32L151RBH6 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose STM32L151RBH6 for compact, ultra-low-power embedded products that need a 32 MHz Cortex-M3 core, 128 KB Flash, USB, ADC, DAC, and a 64-TFBGA 5 x 5 mm footprint. It is particularly suitable for portable instruments, sensor nodes, data loggers, and USB-connected control products that do not require the STM32L152 family's hardware cryptographic capability. Consider STM32L152RBH6 when security-focused communication justifies that additional block while retaining the same principal CPU, memory, and package configuration. Related STM32L151RB members in LQFP or other package forms are not drop-in choices because their PCB footprints differ. Members with larger Flash capacities may also require firmware and application changes, so they should not be treated as automatic replacements. Before finalizing any substitution, compare the manufacturer pin tables, electrical limits, boot configuration, USB implementation, peripheral set, and software support.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini STM32L152RBH6
Brand STMicroelectronics STMicroelectronics
Package 64-TFBGA (5x5) 64-TFBGA (5x5)
Processor Core Arm Cortex-M3 Arm Cortex-M3
CPU Frequency 32 MHz 32 MHz
Flash Memory 128 KB 128 KB
Supply Voltage 3 V 2.5 V / 3.3 V
Connectivity USB USB
Analog Peripherals ADC and DAC ADC and DAC
Hardware Cryptography Not identified for STM32L151 Available in STM32L152 family

Diferensiator Kunci

  • Maintains the principal processing and memory configuration in the closest identified same-package alternative (vsSTM32L152RBH6)
  • Provides USB connectivity for direct host communication (vsSTM32L152RBH6)
  • Integrates analog measurement and signal generation in a compact package (vsSTM32L152RBH6)

Catatan Desain

Use the STM32L151RB package drawing and pin-description tables to create the 64-TFBGA land pattern, including all 64 ball locations and exposed thermal or ground requirements. Place the required input, output, and decoupling capacitors directly at the corresponding power pins. Preserve short return paths for every supply connection and avoid routing sensitive analog inputs beneath switching nodes or other high-current paths.

Plan USB routing as a controlled-impedance interface using the dimensions and stack-up guidance in the manufacturer documentation. Keep the USB differential pair continuous, matched to the reference plane, and free from test-point stubs. Separate analog inputs from USB, clock, and power-conversion paths where practical. If the board includes both USB and an LCD interface, review crosstalk and grounding across the complete board-level signal path.

Budget the power tree for the 3 V operating rail and every externally powered peripheral. The MCU can remain in low-power modes between measurement events, but system consumption also depends on the ADC, DAC, USB interface, memory, pull networks, and indicator circuits. Measure current in every active state and configure unused pins and peripherals to avoid unintended loads before calculating battery life.

Do not substitute an STM32L151RB family member in another package and treat it as a drop-in replacement. The 64-TFBGA and 64-LQFP options use different land patterns, while options with different Flash capacities may also affect software organization and application support. Review the complete package, pin, electrical, memory, boot, and peripheral requirements whenever the device marking changes.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The general-purpose STM32L151RBH6 is not presented as an AEC-Q100-qualified automotive device. Specific material-compliance declarations should be confirmed on the manufacturer product page or applicable package documentation.

Pencarian Terkait

STM32L151RBH6 datasheet STM32L151RBH6 pinout STM32L151RBH6 datasheet pdf STM32L151RBH6 specifications STM32L151RBH6 64-TFBGA pinout STM32L151RBH6 equivalent STM32L151RBH6 replacement STM32L151RBH6 vs STM32L152RBH6 STM32L151RBH6 price STM32L151RBH6 stock STM32L151RBH6 USB sensor controller STM32L151RBH6 application circuit

Komponen dan Istilah Terkait

STMicroelectronics STM32L151RBH6 STM32L151RB STM32L152RBH6 Arm Cortex-M3 STM32L1 ultra-low-power microcontroller 32-bit microcontroller embedded microcontroller semiconductor 128 KB Flash 32 KB SRAM 4 KB EEPROM 32 MHz 33.3 DMIPS USB ADC DAC LCD interface 64-TFBGA BGA family surface mount SMD 3 V supply low-power design
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ