STM32L151RBH6 - 32MHz Cortex-M3 128KB MCU | STMicroelectronics
部品番号: STM32L151RBH6 ✓ 生産中STM32L151RBH6 概要
An ultra-low-power microcontroller is an embedded semiconductor designed to complete control, communication, and data-acquisition tasks while minimizing energy consumption. The STM32L1 family belongs to the microcontroller hierarchy, combining an ARM Cortex-M3 processor core with Flash memory, SRAM, EEPROM, communication peripherals, analog converters, and security features. This combination makes it suitable for battery-powered, portable, industrial, and instrumented products.
The STM32L151RBH6 provides 128 KB of Flash, 32 KB of SRAM, 4 KB of EEPROM, a 32 MHz Cortex-M3 core, and USB connectivity according to the manufacturer datasheet information. Its peripheral set includes LCD support, ADC, and DAC functions, allowing a compact design to combine control logic, analog measurement, waveform generation, and direct USB data exchange.
The Cortex-M3 architecture provides a 32-bit instruction set while retaining an efficient embedded-control architecture. Operating at 32 MHz, or 33.3 DMIPS as identified in the product comparison data, the device provides deterministic processing for protocol handling, peripheral management, and user-interface logic. Low-power operating modes are especially important when the same controller must alternate between active processing, low-power monitoring, and reduced-communication states.
Typical uses include USB-connected sensors, portable measurement instruments, compact industrial controllers, medical monitoring equipment, and low-power data loggers. In a sensor node, the MCU can sample analog channels with its ADC, store local information in EEPROM, and transmit results through USB when connected. In a portable instrument, its LCD interface, DAC, and low-power profile support compact user-facing designs without requiring a separate host processor.
PCB design should preserve the exact 64-TFBGA land pattern, power distribution, and decoupling arrangement specified by STMicroelectronics. Place each supply capacitor close to its associated device pin, maintain the required power and ground connectivity, and follow the package-specific assembly and layout recommendations. Confirm USB impedance and signal-routing guidance before releasing a high-volume layout.
This product record combines the official STM32L151RB family information with distributor and cross-reference findings. It also organizes package, application, replacement, and selection guidance so engineers can identify a verified same-package alternative or determine when redesigning to another STM32 variant is more appropriate than treating a functional equivalent as a drop-in replacement.
ドロップイン代替品: STM32L151RBH6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
STM32L152RBH6
✅ ドロップイン📋 参考代替品(カタログ未掲載)
STM32L151RBH6 最大定格&電気的特性
| Product Type | Ultra-low-power 32-bit microcontroller |
| Processor Core | Arm Cortex-M3 |
| CPU Architecture | 32-bit |
| Maximum CPU Frequency | 32 MHz |
| Peak Performance | 33.3 DMIPS |
| Flash Memory | 128 KB |
| SRAM | 32 KB |
| EEPROM | 4 KB |
| 電源電圧 | 3 V |
| Connectivity | USB |
| Analog Peripherals | ADC and DAC |
| Display Support | LCD interface |
| パッケージ | 64-TFBGA, 5 x 5 mm |
| 実装タイプ | Surface mount |
STM32L151RBH6 64-tfbga, 5 x 5 mm ピン配置ガイド
STM32L151RBH6 (64-tfbga, 5 x 5 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32L151RBH6.
詳細は データシート をご参照ください。
主な用途
STM32L151RBH6 の用途: 6 件s: USB-Connected Portable Sensor Node, Compact Industrial Data Logger, Battery-Powered Medical Monitoring Device, USB Test and Measurement Instrument, USB Security and Access Controller, Low-Power Data Acquisition Controller.
USB-Connected Portable Sensor Node
The STM32L151RBH6 fits a portable sensor node because it combines a 32 MHz Arm Cortex-M3 core with USB connectivity, 128 KB Flash, 32 KB SRAM, and 4 KB EEPROM. The microcontroller can acquire sensor data, apply local filtering, retain calibration or event data in EEPROM, and present the results through USB when a host connection is made. Its 3 V supply and ultra-low-power family positioning are useful for portable instruments, although the final battery budget must include active and sleep-state current, USB transceiver behavior, and the external sensor load.
おすすめ
Compact Industrial Data Logger
The STM32L151RBH6 is appropriate for a compact industrial data logger that records periodic sensor readings and transfers them to a host. Its 128 KB Flash provides embedded program and nonvolatile storage capacity, while 32 KB SRAM supports buffering and protocol handling. The ADC supports analog measurement and the USB interface can simplify direct connection to a service computer. For factory use, the design should include industrial I/O conditioning, ESD protection, and a power architecture that accommodates transient industrial supply conditions.
おすすめ
Battery-Powered Medical Monitoring Device
The STM32L151RBH6 can serve as the control hub in a battery-powered medical monitoring product that combines sensor acquisition, local status indication, and wired configuration. Its 32 MHz Cortex-M3 processor can manage sampling schedules and data processing, the ADC can read analog sensor signals, and USB can support isolated charging or data-transfer interfaces when implemented safely. Medical designs require appropriate clinical isolation, leakage-current analysis, protection barriers, and validation of all safety-related behavior; the MCU selection alone does not establish regulatory compliance.
おすすめ
USB Test and Measurement Instrument
The STM32L151RBH6 fits a compact USB test and measurement instrument requiring local computation and host connectivity. Its 32 MHz Cortex-M3 core can execute measurement control, the ADC can acquire analog inputs, and the DAC can generate test waveforms or reference levels. USB provides a practical interface for configuration, captured data, and firmware maintenance. The 64-TFBGA 5 x 5 mm package supports compact board layouts, although fine-pitch assembly and test access must be considered during product planning.
おすすめ
USB Security and Access Controller
The STM32L151RBH6 can be used in a USB-connected access or security peripheral when the design requires USB communication, event processing, and control of local outputs. The 32 MHz Cortex-M3 core handles protocol tasks and application logic, while Flash stores firmware and 4 KB EEPROM can retain configuration or audit-related parameters. Security implementations should use authenticated firmware procedures, protected keys, appropriate reset behavior, and event logging. For designs requiring hardware cryptographic acceleration, evaluate STM32L152RBH6 instead.
おすすめ
Low-Power Data Acquisition Controller
The STM32L151RBH6 is well matched to a low-power data-acquisition controller that periodically samples sensors, performs local calculations, and stores or transmits results. Its ultra-low-power STM32L1 architecture supports duty-cycled operation, while the 32 MHz Cortex-M3 core provides enough performance for timing, filtering, and communication handling. The ADC supports analog inputs, EEPROM can store calibration parameters, and USB can be enabled for laboratory configuration. Overall battery life depends on the chosen operating mode, sampling interval, external analog circuitry, and regulator efficiency.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32L151RBH6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32L152RBH6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 64-TFBGA (5x5) | 64-TFBGA (5x5) |
| Processor Core | Arm Cortex-M3 | Arm Cortex-M3 |
| CPU Frequency | 32 MHz | 32 MHz |
| Flash Memory | 128 KB | 128 KB |
| Supply Voltage | 3 V | 2.5 V / 3.3 V |
| Connectivity | USB | USB |
| Analog Peripherals | ADC and DAC | ADC and DAC |
| Hardware Cryptography | Not identified for STM32L151 | Available in STM32L152 family |
主な差別化要因
- Maintains the principal processing and memory configuration in the closest identified same-package alternative (vs STM32L152RBH6)
- Provides USB connectivity for direct host communication (vs STM32L152RBH6)
- Integrates analog measurement and signal generation in a compact package (vs STM32L152RBH6)
設計ノート
Use the STM32L151RB package drawing and pin-description tables to create the 64-TFBGA land pattern, including all 64 ball locations and exposed thermal or ground requirements. Place the required input, output, and decoupling capacitors directly at the corresponding power pins. Preserve short return paths for every supply connection and avoid routing sensitive analog inputs beneath switching nodes or other high-current paths.
Plan USB routing as a controlled-impedance interface using the dimensions and stack-up guidance in the manufacturer documentation. Keep the USB differential pair continuous, matched to the reference plane, and free from test-point stubs. Separate analog inputs from USB, clock, and power-conversion paths where practical. If the board includes both USB and an LCD interface, review crosstalk and grounding across the complete board-level signal path.
Budget the power tree for the 3 V operating rail and every externally powered peripheral. The MCU can remain in low-power modes between measurement events, but system consumption also depends on the ADC, DAC, USB interface, memory, pull networks, and indicator circuits. Measure current in every active state and configure unused pins and peripherals to avoid unintended loads before calculating battery life.
Do not substitute an STM32L151RB family member in another package and treat it as a drop-in replacement. The 64-TFBGA and 64-LQFP options use different land patterns, while options with different Flash capacities may also affect software organization and application support. Review the complete package, pin, electrical, memory, boot, and peripheral requirements whenever the device marking changes.
コンプライアンス情報
The general-purpose STM32L151RBH6 is not presented as an AEC-Q100-qualified automotive device. Specific material-compliance declarations should be confirmed on the manufacturer product page or applicable package documentation.