STMicroelectronics

STM32L412RBI6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics

MPN: STM32L412RBI6 ✓ Aktif
1.71 V to 3.6 V Vdss 16 nA Id 64-pin UFBGA, 5 x 5 mm Package 80 MHz Speed 128 KB (128K x 8 bits) Memory
MOQ: 1 |

STM32L412RBI6 Ringkasan

The STMicroelectronics STM32L412RBI6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller operating up to 80 MHz, with 128 KB of Flash memory, in a 64-pin UFBGA 5 x 5 mm package. Its operating supply range is 1.71 V to 3.6 V, and the industrial temperature grade supports operation from -40 °C to +85 °C. The device combines low-power design, a USB interface, and extensive embedded resources in a compact surface-mount package.

An ultra-low-power microcontroller is designed to minimize energy consumption while retaining sufficient processing capability for embedded control, sensing, communications, and data acquisition. The STM32L4 product family combines an Arm Cortex-M4 processor core with power-management modes, low-leakage retention features, and integrated peripherals. This places the STM32L412RBI6 within the hierarchy of 32-bit microcontroller, embedded processor, and low-power system-on-chip designs intended for battery-operated and always-on equipment.

The STM32L412RBI6 operates at up to 80 MHz and provides 128 KB of Flash memory organized as 128K x 8 bits. Its 1.71 V to 3.6 V operating range supports low-energy sensor and IoT systems. FlexPowerControl supports multiple low-power operating states, while the device can consume 16 nA in Shutdown mode and maintain 300 nA in VBAT mode for the real-time clock and 32 x 32-bit backup registers. These figures make controlled sleep duration and backup-domain behavior important parts of system-level power budgeting.

The microcontroller uses the Arm Cortex-M4 core with integrated floating-point capability, enabling efficient control-loop and signal-processing work. Its USB capability supports connected peripheral, configuration, and data-transfer designs. Four wakeup pins are identified for Shutdown-mode recovery, allowing external events to initiate operation without continuous active processing. Integration reduces the number of external discrete components in compact sensor, industrial, medical, and wearable systems.

Typical applications include low-power sensor nodes, industrial monitoring equipment, USB-connected compact controllers, battery-powered instruments, secure access terminals, and wearable products. Its 80 MHz processing rate and low-power modes suit systems that must alternate between periodic measurements, data processing, and long standby intervals. The 64-pin UFBGA package also reduces board area, although its fine pitch requires careful PCB layout and assembly planning.

For a new design, begin with the manufacturer pin-description table and package land pattern, then confirm pin multiplexing, USB routing, decoupling, and exposed-pad requirements against the current device documentation. Validate the clock, low-power transitions, and wake sources in hardware because external component tolerances and leakage can affect the calculated energy budget. Use the Request a Quote form on this page to confirm order configuration, lead time, and availability.

Alternatif penggantian untuk STM32L412RBI6 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

STM32L412RBI6 Rating Maksimal & Karakteristik Listrik

Product Type 32-bit Arm Cortex-M4 ultra-low-power microcontroller
Maximum CPU Frequency 80 MHz
Flash Memory 128 KB (128K x 8 bits)
Tegangan Pemuat Kerja 1.71 V to 3.6 V
Industrial Temperature Range -40 °C to +85 °C
Shutdown Mode Current 16 nA
VBAT Mode Current 300 nA
Shutdown Wakeup Inputs 4 pins
RTC Backup Registers 32 x 32 bits
Processor Core Arm Cortex-M4 with floating-point unit
Architecture Arm 32-bit RISC
USB Interface Yes
Power Control Technology FlexPowerControl
Paket 64-pin UFBGA, 5 x 5 mm
Tipe Mounting Surface mount
Shipping Container Tray

STM32L412RBI6 64-pin ufbga, 5 x 5 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk STM32L412RBI6 (64-pin ufbga, 5 x 5 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 64-pin ufbga, 5 x 5 mm untuk STM32L412RBI6

Tidak ada data diatribut pin yang tersedia untuk STM32L412RBI6.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

STM32L412RBI6 cocok untuk 6 aplikasis: Low-Power Industrial Sensor Node, USB-Conditioned Embedded Controller, Battery-Powered Wearable Monitor, Battery-Powered Medical Instrument, Secure Access and Control Terminal, Compact Data Acquisition Module.

🏭

Low-Power Industrial Sensor Node

The STM32L412RBI6 fits compact industrial sensor nodes that sample sensors periodically and sleep for long intervals. Its 1.71 V minimum operating voltage supports low-voltage supply designs, while Shutdown current of 16 nA provides a low quiescent baseline. Four wakeup pins allow external activity to restart measurement. The 80 MHz Cortex-M4 core can filter and prepare sensor readings quickly, and the 64-pin 5 x 5 mm UFBGA package helps reduce board area. Designers should still include regulator loss and peripheral leakage when calculating the complete system current.

🔧

USB-Conditioned Embedded Controller

The STM32L412RBI6 is suitable for USB-connected embedded controllers because it combines an 80 MHz Cortex-M4 processor, 128 KB of Flash, and USB support in a compact package. It can enumerate as a USB device, process local input data, and present a compact control interface to a host computer. Its low-power modes are useful during disconnected or idle periods. USB layout requires careful treatment of impedance, supply behavior, and connector protection, so use the manufacturer reference design rather than routing USB solely from the generic BGA footprint.

📱

Battery-Powered Wearable Monitor

The STM32L412RBI6 supports wearable monitoring designs that alternate between active measurement and long standby intervals. Its 16 nA Shutdown current, 300 nA VBAT-mode current, and RTC and backup-register retention help preserve essential state between charging cycles. The 80 MHz core provides enough performance for local signal processing, and the small 5 x 5 mm UFBGA package suits space-constrained enclosures. Battery life must be evaluated with the selected regulator, sensor leakage, radio activity, and wakeup frequency because the MCU figure is only one portion of system consumption.

💊

Battery-Powered Medical Instrument

The STM32L412RBI6 can serve as the control processor in a compact battery-powered medical instrument requiring local measurement, USB connectivity, and low standby demand. Its 80 MHz Cortex-M4 core supports deterministic control tasks, while Shutdown and VBAT modes reduce consumption between procedures. The 128 KB of Flash provides room for firmware and configuration handling in space-constrained designs. Medical designs require separate assessment of applicable product standards, risk controls, and validation processes, which are not established merely by the MCU's temperature range.

🧩

Secure Access and Control Terminal

The STM32L412RBI6 is appropriate for compact access-control terminals that coordinate readers, indicators, local storage, and a host connection. Its 80 MHz processing capability supports protocol handling and real-time control, while USB provides a convenient wired configuration and maintenance path. Low-power modes are valuable in door controllers and auxiliary panels where continuous full-rate processing is unnecessary. The design must separately protect credentials and enforce authentication policy, and the exact security peripherals and certification requirements should be verified for the STM32L412 device variant.

🖥️

Compact Data Acquisition Module

The STM32L412RBI6 fits compact data-acquisition modules that combine analog measurement, local filtering, and USB transfer. Its 128 KB of Flash accommodates firmware for acquisition control and calibration handling, while the 80 MHz Cortex-M4 core processes samples between transfers. The 64-pin UFBGA package reduces module size but requires high-quality assembly and careful thermal design. Select external analog components according to the required signal range, bandwidth, and isolation rather than assuming the microcontroller's USB interface replaces dedicated measurement circuitry.

What is the operating voltage of the STM32L412RBI6?
The STM32L412RBI6 operates from 1.71 V to 3.6 V. According to the manufacturer datasheet listing, this range supports low-voltage embedded systems while covering common single-cell and regulated low-voltage supply designs. The 80 MHz Cortex-M4 core can therefore operate without requiring a 3.3 V-only supply rail. Confirm the detailed operating-mode limits, internal regulator requirements, and external-capacitor values in the current STMicroelectronics datasheet before finalizing a power-supply design.
What are the key specifications of STM32L412RBI6 that engineers should know?
The STM32L412RBI6 combines an 80 MHz Arm Cortex-M4 core, 128 KB of Flash, USB, and ultra-low-power operation in a 64-pin 5 x 5 mm UFBGA package. The manufacturer datasheet listing specifies a 1.71 V to 3.6 V supply range, operation from -40 °C to +85 °C, 300 nA VBAT-mode current for RTC and backup registers, and 16 nA Shutdown current. Its four Shutdown wakeup pins also support event-driven recovery from a low-current state.
Where can I download the STM32L412RBI6 datasheet PDF?
The official STMicroelectronics product page for the STM32L412RB family is the appropriate starting point for the current manufacturer documentation. The STM32L412RBI6 is an orderable member of that family, and the product page links to its technical resources, including the datasheet, reference manual, errata, and programming information. Use the device-specific ordering information to confirm package and temperature-grade suffixes before applying instructions from another STM32L4 variant.
Where can I find the STM32L412RBI6 pinout?
The STM32L412RBI6 pinout is found in the pin-description section of the manufacturer datasheet and the associated package information. The device uses a 64-pin 5 x 5 mm UFBGA package, so a standard 64-pin drawing or a generic BGA symbol should not be assumed to match the exact ball assignment. Use the manufacturer pin table to map power, ground, USB, clock, reset, debug, and GPIO functions before assigning PCB tracks or creating a footprint.
Is the STM32L412RBI6 suitable for low-power sensor applications?
The STM32L412RBI6 is well suited to low-power sensor applications because its operating supply begins at 1.71 V and its Shutdown current is specified as 16 nA. VBAT operation draws 300 nA while retaining the RTC and 32 x 32-bit backup registers, allowing timekeeping and state retention when the main supply is absent. Actual product-level consumption depends on the selected power mode, peripherals, wakeup source, and leakage of external circuitry.
What can replace the STM32L412RBI6?
A true drop-in replacement for the STM32L412RBI6 must match its 64-pin UFBGA footprint, pin functions, 128 KB Flash configuration, 80 MHz-class operating requirement, USB capability, supply range, and temperature grade. No distinct pin-compatible replacement is established by the available cross-reference results. The STM32L412RBI6P listing has the same core memory and package description but represents a packaging suffix, so it does not add a distinct drop-in engineering alternative and should not be used to pad a replacement list.
What is the best cross-brand equivalent for STM32L412RBI6?
No verified cross-brand equivalent is established for the STM32L412RBI6 in the available cross-reference information. A cross-brand candidate would still require an identical 64-pin UFBGA land pattern, compatible power and ground pins, equivalent peripheral multiplexing, and equivalent USB, debug, and clock functions. Selecting a device merely because it has a Cortex-M4 core, 128 KB Flash, or a 64-pin package can create board-level incompatibility and should not be treated as a drop-in replacement.
STM32L412RBI6 vs STM32L412RBT6 - which is better for a compact design?
The STM32L412RBI6 is the better choice when the board design specifically requires the 64-pin 5 x 5 mm UFBGA package and the associated exact ball layout. The STM32L412RBT6 is associated with a 64-pin leaded package, making it unsuitable as a direct substitution on an existing UFBGA PCB despite sharing the STM32L412R family and 128 KB Flash configuration. Choose according to the physical footprint and pin assignment, not family name alone.
When should I choose STM32L412RBI6 instead of a different STM32L4 microcontroller?
Choose STM32L412RBI6 when the design requires a compact 64-pin UFBGA implementation, 128 KB of Flash, an 80 MHz Arm Cortex-M4 core, USB connectivity, and low-power modes including 16 nA Shutdown operation. Select another STM32L4 member when its memory, package, analog resources, connectivity, or qualification better matches the product requirements. Software migration is simplified by family compatibility, but peripheral availability and the physical package must still be checked independently.
Is STM32L412RBI6 the same as STM32L412RBI6P?
The STM32L412RBI6 and STM32L412RBI6P listings both describe an 80 MHz Cortex-M4 MCU with 128 KB of Flash in a 64-pin 5 x 5 mm UFBGA package. The additional P character denotes a different order or shipping configuration, while the electrical and pin-compatible device identity remains the same. It is therefore unnecessary to place the packing suffix in a drop-in alternatives list because it does not provide a distinct alternative function, footprint, or parameter set.
Where can I buy STM32L412RBI6 online?
Use the Request a Quote form on this page to request STM32L412RBI6 pricing, stock confirmation, lead time, and order details. The exact ordering code identifies a 64-pin UFBGA microcontroller, so quote requests should state STM32L412RBI6 without substituting a tape-and-reel suffix, temperature grade, or package variant. Current commercial terms should be confirmed directly because distributor inventory and lead times can change independently of the device's technical specification.
What is the price of STM32L412RBI6?
Current pricing for STM32L412RBI6 is obtained through the Request a Quote form on this page so that the quantity, packaging, and commercial terms can be matched to your order. The part number identifies a 64-pin 5 x 5 mm UFBGA configuration with 128 KB of Flash and an 80 MHz Cortex-M4 core. For comparison, the same page also records a historical listing price and date, but that figure should not be treated as a firm quotation.
What is the lead time for STM32L412RBI6?
Lead time for STM32L412RBI6 should be confirmed through the Request a Quote form on this page, using the exact 64-pin UFBGA ordering code and the required quantity. Lead time can vary with inventory, production schedules, packaging configuration, and order volume, so a generic range would not represent a firm commitment. Request a written quotation that identifies STM32L412RBI6 and states the expected delivery schedule before incorporating the part into a production schedule.
Is STM32L412RBI6 in stock?
Current stock for STM32L412RBI6 is best confirmed through the Request a Quote form on this page. The part is actively offered for ordering, but a distributor listing alone does not guarantee that inventory is available for a specific quantity or delivery date. State the required quantity, target date, acceptable package condition, and whether reel or tray packaging is needed when requesting a quotation.
What tools are compatible with programming STM32L412RBI6?
The STM32L412RBI6 is programmed through its Arm-compatible debug and programming interface, using the appropriate STMicroelectronics programming and debugging toolchain. The key hardware checks are the package's exact pin assignments, debug-port connection, BOOT configuration, supply sequencing, and reset behavior. Software support should be selected for the STM32L4 family and the specific device ID, while the board design must follow the manufacturer reference schematic and package requirements.
Does STM32L412RBI6 meet RoHS and REACH requirements?
The STM32L412RBI6 is ordered as an RoHS-relevant and REACH-relevant RoHS-compliant and REACH-compliant product, subject to confirmation of the current manufacturer material declaration for the exact ordering code. RoHS controls restricted substances in electrical and electronic equipment, while REACH addresses chemical substances in the European Union. The 64-pin UFBGA package and temperature grade do not by themselves determine compliance, so procurement documentation should match the exact MPN.

Data referensi engineering untuk STM32L412RBI6 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose STM32L412RBI6 when the PCB requires the exact 64-pin 5 x 5 mm UFBGA footprint and the product benefits from an 80 MHz Arm Cortex-M4 core, 128 KB of Flash, USB connectivity, and low-power operation down to 16 nA in Shutdown mode. The 1.71 V minimum supply is particularly useful for compact battery-powered sensing, while the -40 °C to +85 °C range suits industrial equipment. STM32L412 variants with different package codes should be selected only after checking their physical dimensions, ball or lead assignments, pin multiplexing, and PCB land pattern; they are not direct substitutes for an existing UFBGA design. A cross-brand MCU also requires identical footprint and functional mapping, so core architecture and Flash capacity alone are insufficient replacement criteria. If the design does not require USB, can use a larger package, or needs different analog or communications resources, compare the broader STM32L4 portfolio for the best peripheral match. For a board already built around STM32L412RBI6, software and peripheral compatibility should remain within the STM32L4 platform unless a complete pin, electrical, and firmware migration is performed.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini
Brand STMicroelectronics
Package 64-pin UFBGA, 5 x 5 mm
Processor Core Arm Cortex-M4
Maximum CPU Frequency 80 MHz
Flash Memory 128 KB
Operating Supply Voltage 1.71 V to 3.6 V
Industrial Temperature Range -40 °C to +85 °C
Shutdown Current 16 nA
VBAT Mode Current 300 nA
USB Interface Yes

Catatan Desain

Use the 1.71 V to 3.6 V operating range to define the power-supply design, including the internal-regulator configuration and voltage tolerances at the MCU pins. Low-power figures of 16 nA in Shutdown and 300 nA in VBAT mode are useful for mode-selection decisions, but they do not include regulator efficiency, sensor leakage, pull networks, or USB circuitry. Measure current across the complete rail in each operating mode because wakeup timing and leakage can dominate a long sleep interval.

Treat the 64-pin 5 x 5 mm UFBGA as a fine-pitch assembly requiring the exact manufacturer land pattern, solder mask, and paste geometry. Place decoupling capacitors close to their assigned supply and ground balls, and preserve a low-impedance return path for switching and USB signals. Confirm the exposed-pad or thermal-array requirements and assembly-process limits before releasing manufacturing files; do not derive the footprint solely from the generic BGA dimensions.

Assign the USB, SWD, clock, reset, and boot pins directly from the manufacturer pin-description table before routing. Keep high-current return paths compact, separate sensitive analog inputs from digital switching activity, and follow the manufacturer reference schematic for decoupling and external components. The four Shutdown wakeup pins should be checked for active levels, pull configuration, and leakage so an intended wake event cannot be held inactive by an external network.

Do not substitute the STM32L412RBI6P shipping suffix as though it were a different electrical alternative, and do not assume that another STM32L412 variant fits the same PCB. Likewise, a Cortex-M4 device with 128 KB of Flash is not necessarily pin-compatible. Before any substitution, verify the 64-ball assignment, power pins, USB routing, debug interface, clock requirements, peripheral multiplexing, and firmware device support against the manufacturer documentation.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The exact manufacturer material-compliance declarations for STM32L412RBI6 were not established. AEC-Q100 is not applicable because this ordering code is not identified as an automotive-qualified variant.

Pencarian Terkait

STM32L412RBI6 datasheet STM32L412RBI6 datasheet pdf STM32L412RBI6 pinout STM32L412RBI6 specifications STM32L412RBI6 UFBGA64 footprint STM32L412RBI6 equivalent STM32L412RBI6 replacement STM32L412RBI6 vs STM32L412RBT6 STMicroelectronics STM32L412RBI6 STM32L412RBI6 price STM32L412RBI6 stock STM32L412RBI6 low power application circuit

Komponen dan Istilah Terkait

STMicroelectronics STM32L412RBI6 STM32L412RB Arm Cortex-M4 32-bit RISC microcontroller ultra-low-power microcontroller embedded microcontroller semiconductor FlexPowerControl USB real-time clock backup registers Shutdown mode VBAT mode 128 KB Flash 80 MHz 1.71 V to 3.6 V UFBGA-64 UFBGA package family surface-mount package industrial sensor node USB-connected controller battery-powered wearable data acquisition
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ