STM32L412RBI6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics
部品番号: STM32L412RBI6 ✓ 生産中STM32L412RBI6 概要
An ultra-low-power microcontroller is designed to minimize energy consumption while retaining sufficient processing capability for embedded control, sensing, communications, and data acquisition. The STM32L4 product family combines an Arm Cortex-M4 processor core with power-management modes, low-leakage retention features, and integrated peripherals. This places the STM32L412RBI6 within the hierarchy of 32-bit microcontroller, embedded processor, and low-power system-on-chip designs intended for battery-operated and always-on equipment.
The STM32L412RBI6 operates at up to 80 MHz and provides 128 KB of Flash memory organized as 128K x 8 bits. Its 1.71 V to 3.6 V operating range supports low-energy sensor and IoT systems. FlexPowerControl supports multiple low-power operating states, while the device can consume 16 nA in Shutdown mode and maintain 300 nA in VBAT mode for the real-time clock and 32 x 32-bit backup registers. These figures make controlled sleep duration and backup-domain behavior important parts of system-level power budgeting.
The microcontroller uses the Arm Cortex-M4 core with integrated floating-point capability, enabling efficient control-loop and signal-processing work. Its USB capability supports connected peripheral, configuration, and data-transfer designs. Four wakeup pins are identified for Shutdown-mode recovery, allowing external events to initiate operation without continuous active processing. Integration reduces the number of external discrete components in compact sensor, industrial, medical, and wearable systems.
Typical applications include low-power sensor nodes, industrial monitoring equipment, USB-connected compact controllers, battery-powered instruments, secure access terminals, and wearable products. Its 80 MHz processing rate and low-power modes suit systems that must alternate between periodic measurements, data processing, and long standby intervals. The 64-pin UFBGA package also reduces board area, although its fine pitch requires careful PCB layout and assembly planning.
For a new design, begin with the manufacturer pin-description table and package land pattern, then confirm pin multiplexing, USB routing, decoupling, and exposed-pad requirements against the current device documentation. Validate the clock, low-power transitions, and wake sources in hardware because external component tolerances and leakage can affect the calculated energy budget. Use the Request a Quote form on this page to confirm order configuration, lead time, and availability.
ドロップイン代替品: STM32L412RBI6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストSTM32L412RBI6 最大定格&電気的特性
| Product Type | 32-bit Arm Cortex-M4 ultra-low-power microcontroller |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 128 KB (128K x 8 bits) |
| 動作電源電圧 | 1.71 V to 3.6 V |
| Industrial Temperature Range | -40 °C to +85 °C |
| Shutdown Mode Current | 16 nA |
| VBAT Mode Current | 300 nA |
| Shutdown Wakeup Inputs | 4 pins |
| RTC Backup Registers | 32 x 32 bits |
| Processor Core | Arm Cortex-M4 with floating-point unit |
| Architecture | Arm 32-bit RISC |
| USB Interface | Yes |
| Power Control Technology | FlexPowerControl |
| パッケージ | 64-pin UFBGA, 5 x 5 mm |
| 実装タイプ | Surface mount |
| Shipping Container | Tray |
STM32L412RBI6 64-pin ufbga, 5 x 5 mm ピン配置ガイド
STM32L412RBI6 (64-pin ufbga, 5 x 5 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32L412RBI6.
詳細は データシート をご参照ください。
主な用途
STM32L412RBI6 の用途: 6 件s: Low-Power Industrial Sensor Node, USB-Conditioned Embedded Controller, Battery-Powered Wearable Monitor, Battery-Powered Medical Instrument, Secure Access and Control Terminal, Compact Data Acquisition Module.
Low-Power Industrial Sensor Node
The STM32L412RBI6 fits compact industrial sensor nodes that sample sensors periodically and sleep for long intervals. Its 1.71 V minimum operating voltage supports low-voltage supply designs, while Shutdown current of 16 nA provides a low quiescent baseline. Four wakeup pins allow external activity to restart measurement. The 80 MHz Cortex-M4 core can filter and prepare sensor readings quickly, and the 64-pin 5 x 5 mm UFBGA package helps reduce board area. Designers should still include regulator loss and peripheral leakage when calculating the complete system current.
おすすめ
USB-Conditioned Embedded Controller
The STM32L412RBI6 is suitable for USB-connected embedded controllers because it combines an 80 MHz Cortex-M4 processor, 128 KB of Flash, and USB support in a compact package. It can enumerate as a USB device, process local input data, and present a compact control interface to a host computer. Its low-power modes are useful during disconnected or idle periods. USB layout requires careful treatment of impedance, supply behavior, and connector protection, so use the manufacturer reference design rather than routing USB solely from the generic BGA footprint.
おすすめ
Battery-Powered Wearable Monitor
The STM32L412RBI6 supports wearable monitoring designs that alternate between active measurement and long standby intervals. Its 16 nA Shutdown current, 300 nA VBAT-mode current, and RTC and backup-register retention help preserve essential state between charging cycles. The 80 MHz core provides enough performance for local signal processing, and the small 5 x 5 mm UFBGA package suits space-constrained enclosures. Battery life must be evaluated with the selected regulator, sensor leakage, radio activity, and wakeup frequency because the MCU figure is only one portion of system consumption.
おすすめ
Battery-Powered Medical Instrument
The STM32L412RBI6 can serve as the control processor in a compact battery-powered medical instrument requiring local measurement, USB connectivity, and low standby demand. Its 80 MHz Cortex-M4 core supports deterministic control tasks, while Shutdown and VBAT modes reduce consumption between procedures. The 128 KB of Flash provides room for firmware and configuration handling in space-constrained designs. Medical designs require separate assessment of applicable product standards, risk controls, and validation processes, which are not established merely by the MCU's temperature range.
おすすめ
Secure Access and Control Terminal
The STM32L412RBI6 is appropriate for compact access-control terminals that coordinate readers, indicators, local storage, and a host connection. Its 80 MHz processing capability supports protocol handling and real-time control, while USB provides a convenient wired configuration and maintenance path. Low-power modes are valuable in door controllers and auxiliary panels where continuous full-rate processing is unnecessary. The design must separately protect credentials and enforce authentication policy, and the exact security peripherals and certification requirements should be verified for the STM32L412 device variant.
おすすめ
Compact Data Acquisition Module
The STM32L412RBI6 fits compact data-acquisition modules that combine analog measurement, local filtering, and USB transfer. Its 128 KB of Flash accommodates firmware for acquisition control and calibration handling, while the 80 MHz Cortex-M4 core processes samples between transfers. The 64-pin UFBGA package reduces module size but requires high-quality assembly and careful thermal design. Select external analog components according to the required signal range, bandwidth, and isolation rather than assuming the microcontroller's USB interface replaces dedicated measurement circuitry.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32L412RBI6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | STMicroelectronics |
| Package | 64-pin UFBGA, 5 x 5 mm |
| Processor Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 128 KB |
| Operating Supply Voltage | 1.71 V to 3.6 V |
| Industrial Temperature Range | -40 °C to +85 °C |
| Shutdown Current | 16 nA |
| VBAT Mode Current | 300 nA |
| USB Interface | Yes |
設計ノート
Use the 1.71 V to 3.6 V operating range to define the power-supply design, including the internal-regulator configuration and voltage tolerances at the MCU pins. Low-power figures of 16 nA in Shutdown and 300 nA in VBAT mode are useful for mode-selection decisions, but they do not include regulator efficiency, sensor leakage, pull networks, or USB circuitry. Measure current across the complete rail in each operating mode because wakeup timing and leakage can dominate a long sleep interval.
Treat the 64-pin 5 x 5 mm UFBGA as a fine-pitch assembly requiring the exact manufacturer land pattern, solder mask, and paste geometry. Place decoupling capacitors close to their assigned supply and ground balls, and preserve a low-impedance return path for switching and USB signals. Confirm the exposed-pad or thermal-array requirements and assembly-process limits before releasing manufacturing files; do not derive the footprint solely from the generic BGA dimensions.
Assign the USB, SWD, clock, reset, and boot pins directly from the manufacturer pin-description table before routing. Keep high-current return paths compact, separate sensitive analog inputs from digital switching activity, and follow the manufacturer reference schematic for decoupling and external components. The four Shutdown wakeup pins should be checked for active levels, pull configuration, and leakage so an intended wake event cannot be held inactive by an external network.
Do not substitute the STM32L412RBI6P shipping suffix as though it were a different electrical alternative, and do not assume that another STM32L412 variant fits the same PCB. Likewise, a Cortex-M4 device with 128 KB of Flash is not necessarily pin-compatible. Before any substitution, verify the 64-ball assignment, power pins, USB routing, debug interface, clock requirements, peripheral multiplexing, and firmware device support against the manufacturer documentation.
コンプライアンス情報
The exact manufacturer material-compliance declarations for STM32L412RBI6 were not established. AEC-Q100 is not applicable because this ordering code is not identified as an automotive-qualified variant.