STM32L422KBU6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics
MPN: STM32L422KBU6 ✓ AktifSTM32L422KBU6 Ringkasan
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. Within the embedded-system hierarchy, the STM32L422KBU6 is a 32-bit Cortex-M4 MCU, an ultra-low-power microcontroller, a semiconductor, and a member of the STM32 family of embedded products. Its Arm Cortex-M4 architecture provides a practical balance of processing capability, power efficiency, and peripheral integration.
Key features include an 80 MHz Arm Cortex-M4 core with FPU, 128 KB of Flash memory, 40 KB of SRAM, and USB connectivity. The floating-point unit accelerates suitable mathematical operations in control, measurement, and signal-processing workloads. The 32-pin UFQFPN package reduces board area compared with larger leaded packages while supporting a high pin count for compact embedded systems.
The STM32L4 architecture is designed around low-power operation and fast processing. A 40 KB SRAM capacity supports working memory, buffering, protocol stacks, and moderate real-time workloads, while the 128 KB Flash area stores firmware and application code. Its peripheral and USB integration is suitable for devices that must collect local data, communicate with a host, and respond within predictable control loops.
Typical applications include low-power USB-connected sensors, compact industrial data-acquisition modules, wearable accessories, medical-monitoring equipment, battery-operated instruments, and compact access-control terminals. The 5 x 5 mm UFQFPN package is especially valuable where board area is constrained but a full Cortex-M4 processor and USB interface are required.
PCB implementation requires careful attention to exposed-pad soldering, pin-1 orientation, decoupling, and signal routing. The exposed thermal and electrical pad must be connected to the PCB ground plane using the manufacturer land pattern, while high-frequency USB traces should be short, impedance-controlled, and routed away from noisy analog sections.
This page combines the confirmed STM32L422KBU6 identity, package, processor, memory, USB, and power-supply information with practical design guidance, sourcing pathways, and application-focused engineering context. Use the Request a Quote form on this page for current commercial availability, while consulting the manufacturer datasheet for the complete pin description, electrical limits, and timing characteristics.
Alternatif penggantian untuk STM32L422KBU6 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian STM32L422KBU6 (sama faktor bentuk dan footprint) — berbeda di dalam Processor Core, Product Type, Flash Memory, USB Support.
Tidak ada alternatif pengganti yang tersedia untuk produk ini.
Permintaan AlternatifSTM32L422KBU6 Rating Maksimal & Karakteristik Listrik
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 128 KB |
| SRAM | 40 KB |
| Architecture | 32-bit RISC |
| USB Support | Yes |
| Paket | 32-pin UFQFPN, 5 x 5 mm |
| Tipe Mounting | Surface mount |
| Communication Interfaces | USB; additional interfaces not specified |
| Low-Power Modes | Ultra-low-power operating modes |
STM32L422KBU6 32-pin ufqfpn, 5 x 5 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk STM32L422KBU6 (32-pin ufqfpn, 5 x 5 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk STM32L422KBU6.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
STM32L422KBU6 cocok untuk 6 aplikasis: USB-Connected Low-Power Sensors, Compact Industrial Data Acquisition, Battery-Powered Wearable Accessories, Medical Monitoring Equipment, Battery-Operated Instruments, Access-Control and Secure Terminals.
USB-Connected Low-Power Sensors
The STM32L422KBU6 fits USB-connected sensing modules that must sample locally, retain configuration, and communicate with a host. Its 80 MHz Arm Cortex-M4 core provides responsive control and signal-processing performance, while 40 KB of SRAM supports buffers and protocol working space. The 128 KB Flash region accommodates firmware, calibration data, and update logic. Use the USB interface for configuration or data transfer, and activate an appropriate low-power mode between measurement intervals to reduce energy use. The 5 x 5 mm UFQFPN footprint also helps miniaturize multi-sensor installations where board area and connector placement are constrained.
Direkomendasikan
Compact Industrial Data Acquisition
The STM32L422KBU6 is appropriate for compact industrial acquisition equipment that combines sensor conditioning, local control, and USB data transfer. At up to 80 MHz, the Cortex-M4 core can service timing-sensitive input routines while the floating-point unit supports common filtering and scaling operations. The 40 KB SRAM provides room for sampled data and communication buffers, and the 128 KB Flash stores application firmware. Its 32-pin UFQFPN package reduces controller footprint, although the exposed pad must be connected to ground according to the manufacturer land pattern and decoupling must follow the datasheet recommendations.
Direkomendasikan
Battery-Powered Wearable Accessories
The STM32L422KBU6 suits compact wearable accessories that combine user interaction, local sensing, and USB charging or configuration. The STM32L422 family's ultra-low-power positioning supports duty-cycled operation, while the Cortex-M4 core handles control logic beyond the workload of a basic 8-bit microcontroller. Its 40 KB SRAM and 128 KB Flash provide sufficient capacity for moderate protocol stacks and application code without moving to a larger package. The 5 x 5 mm UFQFPN body is valuable in wearables, although the PCB must provide adequate exposed-pad soldering, low-leakage routing, and stable USB signal integrity.
Direkomendasikan
Medical Monitoring Equipment
The STM32L422KBU6 can support compact medical-monitoring products requiring deterministic embedded control, USB connectivity, and moderate local memory. The 80 MHz Cortex-M4 core with FPU is suitable for sampling orchestration, digital filtering, and control calculations, while 40 KB of SRAM supports transient measurement buffers. The 128 KB Flash capacity is appropriate for firmware, configuration, and calibration routines. Because medical designs may involve patient-connected accessories, engineers should assess applicable electrical-safety, EMC, and regulatory requirements separately and use the manufacturer datasheet to define analog integration, USB routing, power sequencing, and exposed-pad construction.
Direkomendasikan
Battery-Operated Instruments
The STM32L422KBU6 is well suited to portable instruments requiring more computation than a small 8-bit controller while retaining low-power characteristics. Its 80 MHz Cortex-M4 core accelerates control loops and common floating-point calculations, and the integrated USB interface permits configuration, data export, or charging-system integration. With 128 KB Flash and 40 KB SRAM, the device can run measurement routines, local calibration, and communication firmware in a compact controller. Designers should select operating modes and peripheral settings according to the datasheet, then verify USB-suspend behavior and battery-current requirements over the complete measurement cycle.
Direkomendasikan
Access-Control and Secure Terminals
The STM32L422KBU6 can serve as the controller in compact access-control readers, electronic locks, and secure terminal electronics. The 32-bit Cortex-M4 core provides enough performance for peripheral management, credential handling, event logging, and communication tasks, while USB offers a convenient service or configuration interface. The 128 KB Flash and 40 KB SRAM balance firmware size with working-memory requirements, and the 5 x 5 mm package supports small enclosure designs. Security-sensitive implementations should add the appropriate hardware identity and cryptographic facilities required by the system architecture, then confirm the exact device capabilities in the manufacturer datasheet.
Direkomendasikan
Data referensi engineering untuk STM32L422KBU6 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini |
|---|---|
| Package | 32-pin UFQFPN, 5 x 5 mm |
| Brand | STMicroelectronics |
| Processor Core | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 128 KB |
| SRAM | 40 KB |
| USB Support | Yes |
| Architecture | 32-bit RISC |
Catatan Desain
Implement the UFQFPN footprint directly from the STMicroelectronics package drawing and land-pattern guidance. The exposed pad must be connected to the ground plane, and its thermal and electrical connection should use the recommended via arrangement. Confirm pin 1 orientation against the package marking rather than relying only on the PCB silkscreen. A mismatch can place power, ground, USB, or debug signals on incorrect pads even when the apparent outline dimensions agree.
Route USB D-plus and D-minus as a short, matched-length pair on a continuous reference plane, with the connector placed close to the controller. Avoid placing high-current switching nodes or unrelated high-speed traces beneath the pair. Follow the manufacturer recommendations for series termination and impedance, and inspect the completed layout for return-path discontinuities. Proper USB routing helps reduce reflections, emissions, and susceptibility to ESD events.
Place every required decoupling capacitor close to its corresponding power pin and ground connection, following the capacitor values and layout sequence specified in the manufacturer datasheet. Keep the decoupling return path compact and do not route it through a fragmented ground region. Provide local bulk capacitance near the MCU supply entry, and verify startup current, regulator tolerance, and USB-supply requirements across the complete operating mode. Power sequencing should also satisfy the datasheet's reset and boot constraints.
Do not treat the STM32L422KBT6 as a board-level replacement for the STM32L422KBU6. Both have 32 pins, but UFQFPN and LQFP have different land patterns, exposed-pad arrangements, and assembly requirements. Likewise, do not infer that another Cortex-M4 MCU with USB is interchangeable; verify clock limits, memory, peripherals, interrupt mapping, boot behavior, and software support. For a true redesign, use the exact STM32L422KBU6 datasheet pin table and reference design conventions.
Informasi Konformitas
Compliance attributes are not identified in the manufacturer and distributor product information used for this record.