STMicroelectronics

STM32L422KBU6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics

MPN: STM32L422KBU6 ✓ Hoạt động
32-pin UFQFPN, 5 x 5 mm Package 80 MHz Speed 128 KB Memory
MOQ: 1 |

STM32L422KBU6 Tóm tắt

The STMicroelectronics STM32L422KBU6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 processor with FPU, operating at up to 80 MHz, providing 128 KB of Flash memory and 40 KB of SRAM in a 32-pin UFQFPN 5 x 5 mm package. The STM32L422KBU6 also supports USB and combines a compact footprint with energy-efficient embedded processing for connected, battery-powered, and industrial equipment.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. Within the embedded-system hierarchy, the STM32L422KBU6 is a 32-bit Cortex-M4 MCU, an ultra-low-power microcontroller, a semiconductor, and a member of the STM32 family of embedded products. Its Arm Cortex-M4 architecture provides a practical balance of processing capability, power efficiency, and peripheral integration.

Key features include an 80 MHz Arm Cortex-M4 core with FPU, 128 KB of Flash memory, 40 KB of SRAM, and USB connectivity. The floating-point unit accelerates suitable mathematical operations in control, measurement, and signal-processing workloads. The 32-pin UFQFPN package reduces board area compared with larger leaded packages while supporting a high pin count for compact embedded systems.

The STM32L4 architecture is designed around low-power operation and fast processing. A 40 KB SRAM capacity supports working memory, buffering, protocol stacks, and moderate real-time workloads, while the 128 KB Flash area stores firmware and application code. Its peripheral and USB integration is suitable for devices that must collect local data, communicate with a host, and respond within predictable control loops.

Typical applications include low-power USB-connected sensors, compact industrial data-acquisition modules, wearable accessories, medical-monitoring equipment, battery-operated instruments, and compact access-control terminals. The 5 x 5 mm UFQFPN package is especially valuable where board area is constrained but a full Cortex-M4 processor and USB interface are required.

PCB implementation requires careful attention to exposed-pad soldering, pin-1 orientation, decoupling, and signal routing. The exposed thermal and electrical pad must be connected to the PCB ground plane using the manufacturer land pattern, while high-frequency USB traces should be short, impedance-controlled, and routed away from noisy analog sections.

This page combines the confirmed STM32L422KBU6 identity, package, processor, memory, USB, and power-supply information with practical design guidance, sourcing pathways, and application-focused engineering context. Use the Request a Quote form on this page for current commercial availability, while consulting the manufacturer datasheet for the complete pin description, electrical limits, and timing characteristics.

Bộ thay thế dễ dàng lắp đặt cho STM32L422KBU6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32L422KBU6 (cùng hình factor và footprint) — khác nhau ở Processor Core, Product Type, Flash Memory, USB Support.

STMicroelectronics
Product Type: Ultra-low-power 32-bit microcontroller
So sánh với STM32L422KBU6 →
STMicroelectronics
Processor Core: Arm Cortex-M4
Flash Memory: 256 KB
USB Support: Supported
So sánh với STM32L422KBU6 →

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

STM32L422KBU6 Tỷ lệ tối đa & tính chất điện

Product Type 32-bit ultra-low-power microcontroller
Processor Core Arm Cortex-M4 with FPU
Maximum CPU Frequency 80 MHz
Flash Memory 128 KB
SRAM 40 KB
Architecture 32-bit RISC
USB Support Yes
Hộp 32-pin UFQFPN, 5 x 5 mm
Kiểu lắp đặt Surface mount
Communication Interfaces USB; additional interfaces not specified
Low-Power Modes Ultra-low-power operating modes

Hướng dẫn cấu hình chân STM32L422KBU6 32-pin ufqfpn, 5 x 5 mm

Cấu hình chân cho STM32L422KBU6 (32-pin ufqfpn, 5 x 5 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 32-pin ufqfpn, 5 x 5 mm cho STM32L422KBU6

Không có dữ liệu chân cụ thể sẵn có cho STM32L422KBU6.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

STM32L422KBU6 phù hợp cho 6 Áp dụngs: USB-Connected Low-Power Sensors, Compact Industrial Data Acquisition, Battery-Powered Wearable Accessories, Medical Monitoring Equipment, Battery-Operated Instruments, Access-Control and Secure Terminals.

🧩

USB-Connected Low-Power Sensors

The STM32L422KBU6 fits USB-connected sensing modules that must sample locally, retain configuration, and communicate with a host. Its 80 MHz Arm Cortex-M4 core provides responsive control and signal-processing performance, while 40 KB of SRAM supports buffers and protocol working space. The 128 KB Flash region accommodates firmware, calibration data, and update logic. Use the USB interface for configuration or data transfer, and activate an appropriate low-power mode between measurement intervals to reduce energy use. The 5 x 5 mm UFQFPN footprint also helps miniaturize multi-sensor installations where board area and connector placement are constrained.

🏭

Compact Industrial Data Acquisition

The STM32L422KBU6 is appropriate for compact industrial acquisition equipment that combines sensor conditioning, local control, and USB data transfer. At up to 80 MHz, the Cortex-M4 core can service timing-sensitive input routines while the floating-point unit supports common filtering and scaling operations. The 40 KB SRAM provides room for sampled data and communication buffers, and the 128 KB Flash stores application firmware. Its 32-pin UFQFPN package reduces controller footprint, although the exposed pad must be connected to ground according to the manufacturer land pattern and decoupling must follow the datasheet recommendations.

📱

Battery-Powered Wearable Accessories

The STM32L422KBU6 suits compact wearable accessories that combine user interaction, local sensing, and USB charging or configuration. The STM32L422 family's ultra-low-power positioning supports duty-cycled operation, while the Cortex-M4 core handles control logic beyond the workload of a basic 8-bit microcontroller. Its 40 KB SRAM and 128 KB Flash provide sufficient capacity for moderate protocol stacks and application code without moving to a larger package. The 5 x 5 mm UFQFPN body is valuable in wearables, although the PCB must provide adequate exposed-pad soldering, low-leakage routing, and stable USB signal integrity.

💊

Medical Monitoring Equipment

The STM32L422KBU6 can support compact medical-monitoring products requiring deterministic embedded control, USB connectivity, and moderate local memory. The 80 MHz Cortex-M4 core with FPU is suitable for sampling orchestration, digital filtering, and control calculations, while 40 KB of SRAM supports transient measurement buffers. The 128 KB Flash capacity is appropriate for firmware, configuration, and calibration routines. Because medical designs may involve patient-connected accessories, engineers should assess applicable electrical-safety, EMC, and regulatory requirements separately and use the manufacturer datasheet to define analog integration, USB routing, power sequencing, and exposed-pad construction.

🔧

Battery-Operated Instruments

The STM32L422KBU6 is well suited to portable instruments requiring more computation than a small 8-bit controller while retaining low-power characteristics. Its 80 MHz Cortex-M4 core accelerates control loops and common floating-point calculations, and the integrated USB interface permits configuration, data export, or charging-system integration. With 128 KB Flash and 40 KB SRAM, the device can run measurement routines, local calibration, and communication firmware in a compact controller. Designers should select operating modes and peripheral settings according to the datasheet, then verify USB-suspend behavior and battery-current requirements over the complete measurement cycle.

🖥️

Access-Control and Secure Terminals

The STM32L422KBU6 can serve as the controller in compact access-control readers, electronic locks, and secure terminal electronics. The 32-bit Cortex-M4 core provides enough performance for peripheral management, credential handling, event logging, and communication tasks, while USB offers a convenient service or configuration interface. The 128 KB Flash and 40 KB SRAM balance firmware size with working-memory requirements, and the 5 x 5 mm package supports small enclosure designs. Security-sensitive implementations should add the appropriate hardware identity and cryptographic facilities required by the system architecture, then confirm the exact device capabilities in the manufacturer datasheet.

What are the key specifications of STM32L422KBU6 that engineers should know?
The STM32L422KBU6 is an 8-bit-to-32-bit-class embedded MCU in practice: it uses a 32-bit Arm Cortex-M4 core with FPU at up to 80 MHz, includes 128 KB of Flash and 40 KB of SRAM, and provides USB connectivity. According to the STMicroelectronics manufacturer datasheet, the device is packaged as a 32-pin UFQFPN measuring 5 x 5 mm. These parameters place it between simple 8-bit control devices and more demanding Cortex-M4 applications while preserving a compact board footprint.
What is the operating voltage range of STM32L422KBU6?
The STM32L422KBU6 operating-voltage limits must be taken from the electrical characteristics in the STMicroelectronics manufacturer datasheet. The manufacturer product page and distributor listing confirm an 80 MHz Cortex-M4 device with USB, 128 KB of Flash, and 40 KB of SRAM, but the search material does not expose the minimum and maximum supply voltages. Before power-supply design, use the datasheet's supply-voltage table and check requirements for internal-regulator, ADC, USB, and power-saving configurations.
Where can I download the STM32L422KBU6 datasheet PDF?
The official STM32L422KBU6 datasheet PDF is available through the STMicroelectronics STM32L422xx datasheet link listed on this page. The document covers the Arm Cortex-M4 core, Flash memory, SRAM, USB, peripherals, electrical characteristics, package information, and pin descriptions. Use the manufacturer PDF as the controlling document for pin functions, recommended operating conditions, decoupling, exposed-pad layout, and absolute maximum ratings rather than relying on a distributor summary.
Where can I find the STM32L422KBU6 pinout?
The STM32L422KBU6 pinout is documented in the pin-description section of the STMicroelectronics STM32L422xx manufacturer datasheet. The confirmed package is a 32-pin UFQFPN in a 5 x 5 mm body size, with pin 1 identified by the package marking and the exposed pad requiring a manufacturer-compatible land pattern. Use the package drawing and pin table together when assigning power, ground, reset, boot, debug, USB, and peripheral signals.
Is STM32L422KBU6 suitable for low-power USB sensor applications?
Yes, the STM32L422KBU6 is suitable for low-power USB sensor applications when its supply and peripheral limits are followed. The manufacturer describes the STM32L422xx family as ultra-low-power devices with an Arm Cortex-M4 core operating up to 80 MHz. Its USB connectivity, 128 KB Flash, and 40 KB SRAM support local sampling, buffering, configuration, and host communication, while low-power modes can reduce consumption during idle periods.
STM32L422KBU6 vs STM32L422KBT6: which is better for a new PCB?
STM32L422KBU6 and STM32L422KBT6 serve different layout constraints rather than being direct drop-in equivalents. The STM32L422KBU6 uses a 32-pin UFQFPN measuring 5 x 5 mm, whereas the STM32L422KBT6 uses a 32-pin LQFP measuring 7 x 7 mm. Both are STM32L422-family Cortex-M4 devices with 128 KB Flash, but their footprints differ, so the package choice should follow assembly capability, accessibility, and layout requirements.
What is the best drop-in replacement for STM32L422KBU6?
No independently verified, pin-to-pin drop-in replacement for the STM32L422KBU6 is identified in the available manufacturer and cross-reference information. A valid replacement must preserve the 32-pin UFQFPN 5 x 5 mm footprint, pin assignments, 80 MHz-class operation, 128 KB Flash, 40 KB SRAM, USB function, voltage limits, and peripheral mapping. The STM32L422KBT6 is not a drop-in substitute because its LQFP footprint differs, so a different package requires PCB redesign.
Can STM32L422KBT6 replace STM32L422KBU6 on the same PCB?
No, STM32L422KBT6 cannot replace STM32L422KBU6 on the same PCB without layout changes. The former uses a 32-pin LQFP package, while the latter uses a 32-pin UFQFPN package with a 5 x 5 mm body. Although both belong to the STM32L422 family and share a 32-pin count, matching pin numbers do not establish compatibility when pad geometry, lead spacing, exposed-pad construction, and assembly process differ.
When should I choose STM32L422KBU6 over STM32L422KBT6?
Choose STM32L422KBU6 when board area is the priority and the assembly process can handle a 5 x 5 mm UFQFPN package with an exposed pad. Choose STM32L422KBT6 when larger leads, easier visual inspection, or a 7 x 7 mm LQFP footprint better fits the PCB and assembly process. Both offer the confirmed STM32L422-family combination of an 80 MHz Cortex-M4 core, 128 KB Flash, 40 KB SRAM, and USB.
Is STM32L422KBU6 the same as a 32-pin Cortex-M4 MCU with USB?
No, a description of a 32-pin Cortex-M4 MCU with USB does not establish identity with the STM32L422KBU6. The exact ordering code also identifies the UFQFPN package, 128 KB Flash configuration, and STMicroelectronics product variant. A substitution must match the exact package construction, memory configuration, pin functions, electrical conditions, peripherals, and programming requirements rather than only the processor core and pin count.
What can replace STM32L422KBU6?
A practical replacement for STM32L422KBU6 must be a verified, drop-in match in the 32-pin UFQFPN 5 x 5 mm package. The available cross-reference search did not identify a qualifying same-footprint substitute with confirmed pin compatibility and equivalent electrical and peripheral behavior. Treat similarly positioned Arm Cortex-M4 MCUs as redesign candidates until package drawings, pin tables, memory capacities, USB implementation, and software support have all been checked.
Where can I buy STM32L422KBU6 online?
Use the Request a Quote form on this page to request STM32L422KBU6 pricing, stock confirmation, and lead time. The form provides a direct commercial channel without embedding a temporary price figure in technical content. When requesting a quote, identify the exact STM32L422KBU6 ordering code, confirm the 32-pin UFQFPN package, state the required delivery quantity, and disclose any target date or authorized-production requirements.
What is the price of STM32L422KBU6?
Current STM32L422KBU6 pricing is obtained through the Request a Quote form on this page. Because distributor inventory and commercial terms can change, the form is the appropriate route for a quantity-specific quotation. Submit the exact MPN STM32L422KBU6 and the required order quantity; this avoids ambiguity with STM32L422 variants that use different packages or ordering suffixes.
What is the lead time for STM32L422KBU6?
The current STM32L422KBU6 lead time should be confirmed through the Request a Quote form on this page. Lead time can depend on order quantity, packaging configuration, production planning, and destination, so it should be matched to the production schedule rather than inferred from a generic listing. Include your required quantity, delivery location, target date, and whether the order is for prototype evaluation or recurring production.
Is STM32L422KBU6 in stock?
The Request a Quote form on this page is the direct way to check current STM32L422KBU6 inventory and allocation. One distributor search result showed a single unit in stock, but stock quantities are transient and may not represent the requested volume. Submit the exact quantity required for your build to obtain a current confirmation and avoid making a schedule decision from an obsolete or partial availability indication.
What is the best cross-brand equivalent for STM32L422KBU6?
No verified cross-brand equivalent is recommended for STM32L422KBU6 because the available search produced general comparison tools rather than a confirmed 32-pin UFQFPN substitute. Cross-brand MCU migration requires more than matching CPU frequency and memory: the replacement must preserve the 5 x 5 mm land pattern, 32-pin assignments, USB electrical behavior, clock tree, peripherals, interrupt mapping, startup behavior, and firmware-support requirements. Otherwise, treat another MCU as a new-board platform rather than a drop-in part.

Dữ liệu tham khảo kỹ thuật cho STM32L422KBU6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the STM32L422KBU6 when a design needs an 80 MHz Arm Cortex-M4 core with FPU, 128 KB of Flash, 40 KB of SRAM, USB connectivity, and a compact 5 x 5 mm UFQFPN footprint. It is particularly useful for low-power USB sensing, compact data-acquisition equipment, portable instruments, medical-monitoring electronics, and space-constrained terminals. The STM32L422KBT6 offers the same general Cortex-M4 and memory positioning in a 32-pin LQFP package, making it attractive when larger leads and a 7 x 7 mm footprint are easier to assemble; however, it is not pin-to-pin drop-in compatible with the UFQFPN target. No verified drop-in alternative was identified, so choose another MCU family only when a PCB redesign and firmware revalidation are acceptable. Before committing, confirm supply voltage, temperature grade, peripheral mix, USB implementation, exposed-pad layout, programming method, and lifecycle expectations against the manufacturer documentation.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Package 32-pin UFQFPN, 5 x 5 mm
Brand STMicroelectronics
Processor Core Arm Cortex-M4 with FPU
Maximum CPU Frequency 80 MHz
Flash Memory 128 KB
SRAM 40 KB
USB Support Yes
Architecture 32-bit RISC

Ghi chú thiết kế

Implement the UFQFPN footprint directly from the STMicroelectronics package drawing and land-pattern guidance. The exposed pad must be connected to the ground plane, and its thermal and electrical connection should use the recommended via arrangement. Confirm pin 1 orientation against the package marking rather than relying only on the PCB silkscreen. A mismatch can place power, ground, USB, or debug signals on incorrect pads even when the apparent outline dimensions agree.

Route USB D-plus and D-minus as a short, matched-length pair on a continuous reference plane, with the connector placed close to the controller. Avoid placing high-current switching nodes or unrelated high-speed traces beneath the pair. Follow the manufacturer recommendations for series termination and impedance, and inspect the completed layout for return-path discontinuities. Proper USB routing helps reduce reflections, emissions, and susceptibility to ESD events.

Place every required decoupling capacitor close to its corresponding power pin and ground connection, following the capacitor values and layout sequence specified in the manufacturer datasheet. Keep the decoupling return path compact and do not route it through a fragmented ground region. Provide local bulk capacitance near the MCU supply entry, and verify startup current, regulator tolerance, and USB-supply requirements across the complete operating mode. Power sequencing should also satisfy the datasheet's reset and boot constraints.

Do not treat the STM32L422KBT6 as a board-level replacement for the STM32L422KBU6. Both have 32 pins, but UFQFPN and LQFP have different land patterns, exposed-pad arrangements, and assembly requirements. Likewise, do not infer that another Cortex-M4 MCU with USB is interchangeable; verify clock limits, memory, peripherals, interrupt mapping, boot behavior, and software support. For a true redesign, use the exact STM32L422KBU6 datasheet pin table and reference design conventions.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance attributes are not identified in the manufacturer and distributor product information used for this record.

Tìm kiếm liên quan

STM32L422KBU6 datasheet STM32L422KBU6 pinout STM32L422KBU6 datasheet pdf STM32L422KBU6 schematic STM32L422KBU6 equivalent STM32L422KBU6 replacement STM32L422KBU6 cross reference STM32L422KBU6 vs STM32L422KBT6 STM32L422KBU6 footprint STM32L422KBU6 price STM32L422KBU6 stock STMicroelectronics STM32L422KBU6 STM32L422KBU6 USB application circuit STM32L422KBU6 80MHz 128KB STM32L422KBU6 UFQFPN 32 pin

Các bộ phận và thuật ngữ liên quan

STMicroelectronics STM32L422KBU6 STM32L422KB STM32L422KBT6 STM32L422xx STM32L4 Arm Cortex-M4 Arm Cortex-M4 with FPU 32-bit RISC ultra-low-power microcontroller embedded microcontroller 128 KB Flash 40 KB SRAM 80 MHz USB UFQFPN-32 QFN family surface-mount package exposed pad USB data acquisition low-power sensor industrial control medical monitoring battery-powered instruments access-control terminal
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ