STM32L562RET6 - 512KB Flash, 110MHz Cortex-M33 MCU | STMicroelectronics
MPN: STM32L562RET6 ✓ AktifSTM32L562RET6 Ringkasan
What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit containing a processor core, memory, and programmable input/output peripherals on a single chip. It is the brain of embedded systems, executing firmware to control devices such as sensors, motors, and displays. In the system hierarchy, a microcontroller is a type of embedded processor, which falls under the broader category of integrated circuits (ICs) and semiconductors. The STM32L562RET6 specifically combines high performance with ultra-low power consumption, making it suitable for battery-powered and energy-harvesting applications.
Key features include the Arm Cortex-M33 core with TrustZone for hardware-enforced security, a floating-point unit (FPU) for math-intensive tasks, and a rich set of peripherals including multiple UARTs, SPIs, I2Cs, USB, and an advanced 12-bit ADC. The device supports a wide supply voltage range of 1.71V to 3.6V and operates over a temperature range of -40°C to +85°C. It also features a low-power mode with current consumption as low as 100 nA in standby mode, extending battery life in portable devices.
Technically, the STM32L562RET6 is built on a 40nm process technology, enabling high performance with low leakage. The TrustZone security feature isolates critical code and data, protecting against software attacks. The device includes a hardware cryptographic accelerator supporting AES, RSA, and ECC, as well as a true random number generator (TRNG) for secure key generation. These features make it ideal for IoT devices requiring secure communication and data protection.
Typical applications include secure IoT nodes, smart meters, wearable health monitors, industrial sensors, and battery-powered medical devices. The combination of ultra-low power and security makes it a preferred choice for edge devices that must operate for years on a single battery while protecting sensitive data.
When designing with this MCU, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin. The VDDA pin requires a separate 1uF capacitor for analog noise filtering. For low-power operation, configure the clock to use the low-speed internal oscillator (LSI) and enable the low-power modes in the firmware to achieve the specified standby current.
Alternatif penggantian untuk STM32L562RET6 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian STM32L562RET6 (sama faktor bentuk dan footprint) — berbeda di dalam ADC Resolution, Communication Interfaces, Core, Operating Temperature Range, Standby Current.
STM32L562RET6TR
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
STM32L562RET6Q
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
STM32L562RET6V
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
STM32L552RET6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32L562REI6
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
STM32L562RET6 Rating Maksimal & Karakteristik Listrik
| Core | Arm Cortex-M33 with TrustZone |
| Frekuensi Bawah Maximum | 110 MHz |
| Flash Memory | 512 KB |
| SRAM | 256 KB |
| Paket | 64-LQFP (10x10 mm) |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Rentang Suhu Kerja | -40C to +85C |
| Standby Current | 100 nA |
| ADC Resolution | 12-bit |
| Communication Interfaces | UART, SPI, I2C, USB |
| Cryptographic Accelerator | AES, RSA, ECC |
| True Random Number Generator | Yes |
| Process Technology | 40 nm |
| Status RoHS | Compliant |
Konfigurasi Pin STM32L562RET6
| Pin produk 1 | VBAT — Battery backup supply |
| Pin produk 2 | PC13 — GPIO / RTC output |
| Pin produk 3 | PC14 — GPIO / OSC32_IN |
| Pin produk 4 | PC15 — GPIO / OSC32_OUT |
| Pin produk 5 | PF0 — GPIO |
| Pin produk 6 | PF1 — GPIO |
| Pin produk 7 | NRST — Reset |
| Pin produk 8 | VDD — Digital power supply |
| Pin produk 9 | VSS — Ground |
| Pin produk 10 | VDDA — Analog power supply |
| Pin produk 11 | PA0 — GPIO / ADC input |
| Pin produk 12 | PA1 — GPIO / ADC input |
| Pin produk 13 | PA2 — GPIO / USART2_TX |
| Pin produk 14 | PA3 — GPIO / USART2_RX |
| Pin produk 15 | PA4 — GPIO / SPI1_NSS |
| Pin produk 16 | PA5 — GPIO / SPI1_SCK |
| Pin produk 17 | PA6 — GPIO / SPI1_MISO |
| Pin produk 18 | PA7 — GPIO / SPI1_MOSI |
| Pin produk 19 | PA8 — GPIO / USB_OTG_FS_SOF |
| Pin produk 20 | PA9 — GPIO / USART1_TX |
| Pin produk 21 | PA10 — GPIO / USART1_RX |
| Pin produk 22 | PA11 — GPIO / USB_DM |
| Pin produk 23 | PA12 — GPIO / USB_DP |
| Pin produk 24 | PA13 — GPIO / SWDIO |
| Pin produk 25 | PA14 — GPIO / SWCLK |
| Pin produk 26 | PA15 — GPIO / JTDI |
| Pin produk 27 | PB0 — GPIO / ADC input |
| Pin produk 28 | PB1 — GPIO / ADC input |
| Pin produk 29 | PB2 — GPIO / BOOT1 |
| Pin produk 30 | PB3 — GPIO / JTDO |
| Pin produk 31 | PB4 — GPIO / NJTRST |
| Pin produk 32 | PB5 — GPIO / I2C1_SMBA |
| Pin produk 33 | PB6 — GPIO / I2C1_SCL |
| Pin produk 34 | PB7 — GPIO / I2C1_SDA |
| Pin produk 35 | PB8 — GPIO / I2C1_SCL |
| Pin produk 36 | PB9 — GPIO / I2C1_SDA |
| Pin produk 37 | PB10 — GPIO / I2C2_SCL |
| Pin produk 38 | PB11 — GPIO / I2C2_SDA |
| Pin produk 39 | PB12 — GPIO / SPI2_NSS |
| Pin produk 40 | PB13 — GPIO / SPI2_SCK |
| Pin produk 41 | PB14 — GPIO / SPI2_MISO |
| Pin produk 42 | PB15 — GPIO / SPI2_MOSI |
| Pin produk 43 | PC0 — GPIO / ADC input |
| Pin produk 44 | PC1 — GPIO / ADC input |
| Pin produk 45 | PC2 — GPIO / ADC input |
| Pin produk 46 | PC3 — GPIO / ADC input |
| Pin produk 47 | PC4 — GPIO / ADC input |
| Pin produk 48 | PC5 — GPIO / ADC input |
| Pin produk 49 | PC6 — GPIO / TIM3_CH1 |
| Pin produk 50 | PC7 — GPIO / TIM3_CH2 |
| Pin produk 51 | PC8 — GPIO / TIM3_CH3 |
| Pin produk 52 | PC9 — GPIO / TIM3_CH4 |
| Pin produk 53 | PC10 — GPIO / USART3_TX |
| Pin produk 54 | PC11 — GPIO / USART3_RX |
| Pin produk 55 | PC12 — GPIO / USART3_CK |
| Pin produk 56 | PD0 — GPIO / OSC_IN |
| Pin produk 57 | PD1 — GPIO / OSC_OUT |
| Pin produk 58 | PD2 — GPIO / TIM1_ETR |
| Pin produk 59 | PD3 — GPIO / USART2_CTS |
| Pin produk 60 | PD4 — GPIO / USART2_RTS |
| Pin produk 61 | PD5 — GPIO / USART2_TX |
| Pin produk 62 | PD6 — GPIO / USART2_RX |
| Pin produk 63 | PD7 — GPIO / USART2_CK |
| Pin produk 64 | VDD — Digital power supply |
Aplikasi Umum
STM32L562RET6 cocok untuk 6 aplikasis: Secure IoT Nodes, Smart Meters, Wearable Health Monitors, Industrial Sensors, Battery-Powered Medical Devices, Smart Home Controllers.
Secure IoT Nodes
The STM32L562RET6 is ideal for secure IoT nodes due to its ultra-low power consumption, TrustZone security, and hardware cryptographic accelerator. These features enable secure communication and data protection in edge devices. In a typical IoT node, the MCU collects sensor data, encrypts it using the AES accelerator, and transmits it via a low-power wireless interface. The standby current of 100 nA ensures long battery life, while the Cortex-M33 core provides sufficient processing power for protocol stacks and edge processing. Designers should configure the low-power modes and use the RTC for periodic wake-ups to maximize battery life.
Direkomendasikan
Smart Meters
The STM32L562RET6 is well-suited for smart meters, where accurate measurement, secure communication, and low power are essential. The 12-bit ADC provides precise analog measurements for current and voltage sensing, while the cryptographic accelerator ensures secure data transmission to the utility grid. The MCU's low-power modes allow it to operate on battery backup during power outages. In a typical smart meter, the STM32L562RET6 reads sensor data, processes it, and communicates via a wireless module. The TrustZone security isolates metering firmware from communication stacks, preventing tampering. Designers should use the internal RTC for time-stamping and schedule periodic data uploads to minimize power consumption.
Direkomendasikan
Wearable Health Monitors
The STM32L562RET6 is an excellent choice for wearable health monitors, offering ultra-low power consumption and secure data handling. The MCU can process biometric signals from sensors like heart rate monitors and accelerometers, while the TrustZone security protects patient data. The 100 nA standby current allows the device to operate for extended periods on a small battery. In a typical wearable, the STM32L562RET6 collects sensor data, runs signal processing algorithms, and communicates via Bluetooth Low Energy. The FPU accelerates math-intensive operations like filtering and feature extraction. Designers should optimize the firmware to use the low-power modes and minimize active time to extend battery life.
Direkomendasikan
Industrial Sensors
The STM32L562RET6 is suitable for industrial sensors that require reliable operation in harsh environments. The wide operating temperature range (-40°C to +85°C) and robust communication interfaces make it ideal for factory automation and process control. The MCU can interface with various industrial protocols like Modbus and CAN, while the cryptographic accelerator ensures secure data exchange. In a typical industrial sensor, the STM32L562RET6 reads analog signals, processes them, and transmits data over a fieldbus. The low-power modes reduce energy consumption in battery-powered wireless sensors. Designers should implement proper ESD protection and use the internal watchdog timer for system reliability.
Direkomendasikan
Battery-Powered Medical Devices
The STM32L562RET6 is well-suited for battery-powered medical devices, offering ultra-low power consumption and advanced security features. The MCU can handle complex algorithms for patient monitoring while maintaining data integrity through TrustZone. The 100 nA standby current is critical for devices that must operate for months or years on a single battery. In a typical medical device, the STM32L562RET6 processes sensor data, stores it in flash, and communicates with a base station. The cryptographic accelerator ensures secure data transmission, complying with healthcare regulations. Designers should use the low-power modes and implement a robust power management strategy to maximize battery life.
Direkomendasikan
Smart Home Controllers
The STM32L562RET6 is an ideal choice for smart home controllers, providing secure and efficient management of connected devices. The MCU can handle multiple communication protocols like Zigbee, Z-Wave, and Wi-Fi, while the TrustZone security protects the home network from cyber threats. The low-power modes allow the controller to operate on battery backup during power outages. In a typical smart home hub, the STM32L562RET6 manages device communication, runs automation rules, and provides a user interface. The cryptographic accelerator ensures secure communication with cloud services. Designers should use the internal RTC for scheduling and implement over-the-air firmware updates for security patches.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk STM32L562RET6 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | STM32L562RET6TR | STM32L562RET6Q | STM32L562RET6V | STM32L552RET6 | STM32L562REI6 |
|---|---|---|---|---|---|---|
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | Arm Cortex-M33 with TrustZone | Arm Cortex-M33 with TrustZone | Arm Cortex-M33 with TrustZone | Arm Cortex-M33 with TrustZone | Arm Cortex-M33 with TrustZone | Arm Cortex-M33 with TrustZone |
| Maximum Clock Frequency | 110 MHz | 110 MHz | 110 MHz | 110 MHz | 110 MHz | 110 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Supply Voltage Range | 1.71V to 3.6V | 1.71V to 3.6V | 1.71V to 3.6V | 1.71V to 3.6V | 1.71V to 3.6V | 1.71V to 3.6V |
| Standby Current | 100 nA | 100 nA | 100 nA | 100 nA | 100 nA | 100 nA |
Diferensiator Kunci
- TrustZone security (vsSTM32L552RET6)
- Hardware cryptographic accelerator (vsSTM32L552RET6)
- True random number generator (TRNG) (vsSTM32L552RET6)
Catatan Desain
For optimal power consumption, use the low-power modes (Sleep, Stop, Standby) and configure the clock to use the low-speed internal oscillator (LSI) when high precision is not required. The standby current of 100 nA is achievable only when all peripherals are disabled and the RTC is powered by VBAT. Ensure that the firmware properly configures the power control registers to enter the desired low-power mode.
Place 100nF decoupling capacitors close to each VDD pin and a 1uF capacitor on the VDDA pin for analog noise filtering. Use a ground plane to minimize noise and ensure proper return paths for high-speed signals. For USB applications, route the USB_DM and USB_DP traces as a differential pair with controlled impedance.
Ensure that the BOOT0 pin is properly configured to select the correct boot mode. For secure applications, enable TrustZone early in the firmware development to isolate critical code. Avoid exceeding the absolute maximum ratings for supply voltage and I/O pins, as this can damage the device. Use the internal watchdog timer to prevent system hangs in industrial environments.
Informasi Konformitas
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified - this is a general-purpose MCU, not an automotive-grade part.
