STM8AL3L88TCY - 8-bit Ultra-Low-Power MCU, 64KB Flash | STMicroelectronics
MPN: STM8AL3L88TCY ✓ AktifSTM8AL3L88TCY Ringkasan
An 8-bit microcontroller (MCU) is a compact integrated circuit designed for embedded control applications, executing instructions on an 8-bit data bus. It typically includes a CPU, memory (Flash, RAM, EEPROM), and peripherals such as timers, ADCs, and communication interfaces. In the system hierarchy, an MCU sits between a simple logic IC and a full application processor, providing programmable intelligence for devices like sensors, meters, and industrial controllers. The STM8AL3L88TCY is optimized for ultra-low-power operation, making it suitable for battery-powered and energy-harvesting applications.
Key features include multiple low-power modes (Wait, Active-Halt, Halt) with current consumption as low as 0.35 µA in Halt mode, a 12-bit ADC with up to 25 channels, and a flexible clock system with an internal 16 MHz RC oscillator. The device also includes a real-time clock (RTC) with calendar, and a tamper detection feature for security-sensitive applications. The LQFP-48 package provides a compact footprint while offering sufficient I/O pins for complex designs.
Technically, the STM8AL3L88TCY uses a Harvard architecture with a 3-stage pipeline, achieving up to 16 MIPS at 16 MHz. The ultra-low-power design is achieved through advanced power management, including a low-power oscillator and the ability to disable unused peripherals. The EEPROM allows data storage without external components, and the integrated bootloader supports in-application programming (IAP) for firmware updates.
Typical applications include smart meters, portable medical devices, industrial sensors, and building automation systems. The ultra-low-power consumption extends battery life in remote monitoring applications, while the rich analog peripherals enable precise sensor interfacing. The wide operating voltage range and robust ESD protection make it suitable for harsh industrial environments.
When designing with this device, pay attention to the power supply decoupling and the selection of the appropriate low-power mode for your application. The Halt mode offers the lowest power consumption but requires an external or RTC wake-up source. Ensure the clock configuration is optimized for your performance and power requirements.
Alternatif penggantian untuk STM8AL3L88TCY — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian STM8AL3L88TCY (sama faktor bentuk dan footprint) — berbeda di dalam Package, Flash Memory, Communication Interfaces, Comparators, Core.
STM8L151C8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM8L151C6T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM8L152C8T6
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan✓ Ada di Gudang
$1.5586 / Satuan
Lihat Datasheet →STM8AL3L88TCY Rating Maksimal & Karakteristik Listrik
| Core | STM8 8-bit |
| Frekuensi Bawah Maximum | 16 MHz |
| Flash Memory | 64 KB |
| RAM | 4 KB |
| EEPROM | 2 KB |
| Operating Voltage | 1.8 V to 3.6 V |
| Paket | LQFP-48 (TCY) |
| ADC Resolution | 12-bit |
| ADC Channels | 25 |
| Comparators | 2 |
| Communication Interfaces | SPI, I2C, USART |
| Low-Power Modes | Wait, Active-Halt, Halt |
| Halt Mode Current | 0.35 µA |
| Suhu Kerja | -40°C to +85°C |
| Status RoHS | Compliant |
Konfigurasi Pin STM8AL3L88TCY
| Pin produk 1 | VDD — Power supply |
| Pin produk 2 | VSS — Ground |
| Pin produk 3 | PA0 — General purpose I/O / ADC input |
| Pin produk 4 | PA1 — General purpose I/O / ADC input |
| Pin produk 5 | PA2 — General purpose I/O / ADC input |
| Pin produk 6 | PA3 — General purpose I/O / ADC input |
| Pin produk 7 | NRST — Reset (active low) |
| Pin produk 8 | VSS — Ground |
| Pin produk 9 | VDD — Power supply |
| Pin produk 10 | PB0 — General purpose I/O / SPI clock |
| Pin produk 11 | PB1 — General purpose I/O / SPI MISO |
| Pin produk 12 | PB2 — General purpose I/O / SPI MOSI |
| Pin produk 13 | PB3 — General purpose I/O / SPI chip select |
| Pin produk 14 | PB4 — General purpose I/O / I2C SCL |
| Pin produk 15 | PB5 — General purpose I/O / I2C SDA |
| Pin produk 16 | PB6 — General purpose I/O / USART TX |
| Pin produk 17 | PB7 — General purpose I/O / USART RX |
| Pin produk 18 | VSS — Ground |
| Pin produk 19 | VDD — Power supply |
| Pin produk 20 | PC0 — General purpose I/O / ADC input |
| Pin produk 21 | PC1 — General purpose I/O / ADC input |
| Pin produk 22 | PC2 — General purpose I/O / ADC input |
| Pin produk 23 | PC3 — General purpose I/O / ADC input |
| Pin produk 24 | PC4 — General purpose I/O / ADC input |
| Pin produk 25 | PC5 — General purpose I/O / ADC input |
| Pin produk 26 | PC6 — General purpose I/O / ADC input |
| Pin produk 27 | PC7 — General purpose I/O / ADC input |
| Pin produk 28 | VSS — Ground |
| Pin produk 29 | VDD — Power supply |
| Pin produk 30 | PD0 — General purpose I/O / USART CK |
| Pin produk 31 | PD1 — General purpose I/O / USART RTS |
| Pin produk 32 | PD2 — General purpose I/O / USART CTS |
| Pin produk 33 | PD3 — General purpose I/O / timer input |
| Pin produk 34 | PD4 — General purpose I/O / timer output |
| Pin produk 35 | PD5 — General purpose I/O / timer output |
| Pin produk 36 | PD6 — General purpose I/O / timer output |
| Pin produk 37 | PD7 — General purpose I/O / timer output |
| Pin produk 38 | VSS — Ground |
| Pin produk 39 | VDD — Power supply |
| Pin produk 40 | PE0 — General purpose I/O / ADC input |
| Pin produk 41 | PE1 — General purpose I/O / ADC input |
| Pin produk 42 | PE2 — General purpose I/O / ADC input |
| Pin produk 43 | PE3 — General purpose I/O / ADC input |
| Pin produk 44 | PE4 — General purpose I/O / ADC input |
| Pin produk 45 | PE5 — General purpose I/O / ADC input |
| Pin produk 46 | PE6 — General purpose I/O / ADC input |
| Pin produk 47 | PE7 — General purpose I/O / ADC input |
| Pin produk 48 | VSS — Ground |
Aplikasi Umum
STM8AL3L88TCY cocok untuk 6 aplikasis: Smart Metering, Portable Medical Devices, Industrial Sensors, Building Automation, Wireless Sensor Networks, Portable Consumer Electronics.
Smart Metering
The STM8AL3L88TCY is ideal for smart meters due to its ultra-low-power consumption (0.35 µA in Halt mode) and integrated 12-bit ADC for accurate measurement. It can operate for years on battery power while periodically waking to record consumption. The EEPROM stores calibration data and usage history without external memory. Communication interfaces (SPI, I2C, USART) enable connectivity with PLC or RF modules for data transmission. The wide operating voltage (1.8V-3.6V) accommodates battery voltage variations. In a typical smart meter, the MCU reads current and voltage sensors via the ADC, processes the data, and communicates readings to a central system. The low-power modes ensure minimal energy drain between measurements, extending battery life to 10+ years. Design considerations include using the RTC for scheduled wake-ups and optimizing ADC sampling to balance accuracy and power.
Direkomendasikan
Portable Medical Devices
The STM8AL3L88TCY is well-suited for portable medical devices like glucose meters and pulse oximeters. Its ultra-low-power operation extends battery life, critical for patient convenience. The 12-bit ADC provides precise sensor readings, and the EEPROM stores patient data securely. The device's small LQFP-48 package fits compact designs. In a glucose meter, the MCU reads the sensor via the ADC, calculates glucose levels, and displays results on an LCD. The low-power modes allow the device to remain in standby for months. The integrated comparators can detect sensor faults. Design considerations include using the RTC for timed measurements and ensuring EMC compliance for medical environments. The wide temperature range (-40°C to +85°C) ensures reliable operation in various conditions.
Direkomendasikan
Industrial Sensors
The STM8AL3L88TCY is ideal for industrial sensors such as pressure, temperature, and flow sensors. Its robust design operates from -40°C to +85°C, and the 12-bit ADC interfaces directly with analog sensors. The multiple communication interfaces (SPI, I2C, USART) allow connection to industrial networks like Modbus. The ultra-low-power modes enable battery-powered wireless sensors. In a typical pressure sensor, the MCU reads the sensor via the ADC, applies calibration coefficients from EEPROM, and transmits data over RS-485. The device's ESD protection ensures reliability in harsh environments. Design considerations include proper decoupling and using the watchdog timer for fault recovery. The wide voltage range supports 24V industrial supplies with a regulator.
Direkomendasikan
Building Automation
The STM8AL3L88TCY is used in building automation for HVAC control, lighting, and security systems. Its low-power operation is ideal for battery-powered sensors and actuators. The integrated RTC enables scheduled events, and the communication interfaces support BACnet or KNX protocols via external transceivers. In a smart thermostat, the MCU reads temperature sensors, controls relays for heating/cooling, and communicates with a central controller. The EEPROM stores user settings and schedules. The device's multiple timers can generate PWM for fan speed control. Design considerations include using the low-power modes during idle periods and ensuring proper isolation for safety. The wide operating voltage allows direct connection to 3.3V logic.
Direkomendasikan
Wireless Sensor Networks
The STM8AL3L88TCY is perfect for wireless sensor nodes in IoT applications. Its ultra-low-power consumption (0.35 µA Halt) allows battery-powered nodes to last years. The MCU wakes periodically to read sensors, process data, and transmit via an external RF module. The SPI interface connects to sub-GHz or 2.4GHz transceivers. In a typical node, the MCU reads a temperature sensor, formats the data, and sends it over SPI to a radio. The EEPROM stores node ID and configuration. The device's low-power modes are crucial for energy harvesting applications. Design considerations include minimizing active time and using the RTC for scheduled wake-ups. The wide voltage range supports various battery chemistries.
Direkomendasikan
Portable Consumer Electronics
The STM8AL3L88TCY is used in portable consumer devices like fitness trackers and remote controls. Its small package and low power consumption are ideal for wearable designs. The 12-bit ADC can interface with accelerometers and heart rate sensors. The EEPROM stores user profiles and settings. In a fitness tracker, the MCU reads motion sensors, counts steps, and displays data on an OLED. The low-power modes allow the device to run for weeks on a coin cell. The communication interfaces enable Bluetooth connectivity via an external module. Design considerations include optimizing the ADC sampling rate and using the RTC for timekeeping. The wide temperature range ensures operation in various climates.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk STM8AL3L88TCY — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | STM8AL3L88TAY | STM8L151C8T6 | STM8L151C6T6 | STM8L152C8T6 |
|---|---|---|---|---|---|
| Package | LQFP-48 | LQFP-64 | LQFP-48 | LQFP-48 | LQFP-48 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Flash Memory | 64 KB | 64 KB | 64 KB | 32 KB | 64 KB |
| RAM | 4 KB | 4 KB | 4 KB | 2 KB | 4 KB |
| Halt Mode Current | 0.35 µA | 0.35 µA | 0.5 µA | 0.5 µA | 0.5 µA |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| LCD Driver | No | No | No | No | Yes |
| Operating Voltage | 1.8V - 3.6V | 1.8V - 3.6V | 1.8V - 3.6V | 1.8V - 3.6V | 1.8V - 3.6V |
Diferensiator Kunci
- Ultra-low Halt mode current of 0.35 µA (vsSTM8L151C8T6)
- Integrated EEPROM of 2 KB (vsSTM8L151C6T6)
- LQFP-48 package with 25 ADC channels (vsSTM8AL3L88TAY)
Catatan Desain
For ultra-low-power applications, use the Halt mode with an RTC wake-up. Ensure the power supply is stable and decoupled with 100nF and 10µF capacitors close to the VDD pins. The Halt mode current is 0.35 µA, but this can increase if the RTC is enabled. Optimize the clock configuration to use the low-speed internal oscillator (LSI) for RTC to minimize power consumption.
Place decoupling capacitors (100nF) as close as possible to each VDD pin, and a bulk capacitor (10µF) near the main power entry. For the LQFP-48 package, ensure proper grounding with a solid ground plane. Keep analog and digital grounds separate if using the ADC for precision measurements. Follow ST's layout guidelines in the datasheet for optimal EMC performance.
Avoid floating I/O pins by configuring them as outputs or enabling pull-ups. The NRST pin must be pulled high with a 100nF capacitor to ground for reliable reset. When using the ADC, ensure the reference voltage is stable and bypassed. Do not exceed the absolute maximum ratings for VDD (3.6V) to prevent damage. Use the watchdog timer to recover from software hangs in industrial environments.
Informasi Konformitas
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified.
