STM8L151G6Y3TR - 16MHz 32KB Low-Power MCU | STMicroelectronics
MPN: STM8L151G6Y3TR ✓ AktifSTM8L151G6Y3TR Ringkasan
An ultra-low-power microcontroller is an integrated circuit optimized to minimize energy consumption while executing control tasks. The STM8L family belongs to the broader microcontroller, embedded-processing, and semiconductor hierarchies. These devices are particularly useful for battery-powered equipment, sensor interfaces, portable instruments, and connected products in which the combination of processing capability, fast wake-up behavior, and compact packaging simplifies system integration.
The STM8L151G6Y3TR combines a 16MHz maximum clock with 32KB of Flash memory, 41 I/O ports, and operation from a 1.8V to 3.6V supply range. Its 2.5V and 3.3V operating points align with conventional low-voltage embedded systems. The STM8L EnergyLite architecture emphasizes low-power execution, allowing designers to balance responsive control behavior against the energy budget of a battery-operated product.
The 28-WLCSP package is the principal mechanical distinction of this ordering code. Its 1.7mm by 2.84mm body permits a compact layout but requires careful PCB design, fine-pitch assembly capability, and close inspection of soldering quality. The complete pin assignment, exposed-pad requirements, and recommended land pattern should be taken directly from the STM8L151G6 datasheet and its package drawing before the PCB is released for fabrication.
Typical uses include compact sensor nodes, industrial condition-monitoring modules, low-power measurement instruments, wearable accessories, and small appliance controllers. In these systems, the 16MHz processing rate supports responsive control logic, while the 32KB Flash capacity accommodates firmware, configuration data, and basic application routines. The low supply-voltage range also makes the device suitable for systems using energy-harvesting or regulated low-voltage power sources.
A critical layout consideration is the WLCSP assembly process. Use the manufacturer land pattern, verify solder-paste release and stencil apertures for the selected assembly method, and plan probe access before volume production. Allow appropriate thermal and copper arrangements around the device, and avoid placing tall components where they could interfere with reflow inspection or assembly tooling.
This product page consolidates the verified device identity, package details, technical characteristics, sourcing guidance, and application-oriented design considerations. It also distinguishes genuine same-package alternatives from related devices that require a different footprint, helping engineers evaluate replacement options without assuming that similar specifications imply drop-in compatibility.
Alternatif penggantian untuk STM8L151G6Y3TR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
STM8L152G6Y3TR
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
STM8L151G6Y3TR Rating Maksimal & Karakteristik Listrik
| Product Type | 8-bit ultra-low-power microcontroller |
| Product Series | STM8L EnergyLite |
| Frekuensi Bawah Maximum | 16 MHz |
| Flash Memory | 32 KB (32K x 8 bits) |
| Program Memory Type | Flash |
| Supply Voltage Range | 1.8 V to 3.6 V |
| Nominal Supply Voltage Points | 2.5 V and 3.3 V |
| I/O Port Count | 41 |
| Package Type | 28-pin WLCSP |
| Package Dimensions | 1.7 mm x 2.84 mm |
| Architecture | 8-bit CISC |
| Lifecycle Stage | Active |
| Tipe Mounting | Surface mount |
STM8L151G6Y3TR 1.7 mm x 2.84 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk STM8L151G6Y3TR (1.7 mm x 2.84 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk STM8L151G6Y3TR.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
STM8L151G6Y3TR cocok untuk 6 aplikasis: Battery-Powered Sensor Node, Industrial Condition Monitoring, Portable Measurement Instrument, Wearable Accessory Controller, Low-Power Home Automation Node, Compact Appliance Controller.
Battery-Powered Sensor Node
The STM8L151G6Y3TR fits compact battery-powered sensor nodes because it combines a 16MHz 8-bit core with a 1.8V to 3.6V operating range in a 28-WLCSP package. It can manage sensor reads, threshold logic, local status indication, and periodic communication without occupying a large PCB area. Configure the STM8L low-power modes around the measurement interval rather than leaving the processor continuously active. The 32KB Flash capacity provides room for the main control loop and configuration tables, while the 41 I/O ports allow multiple digital sensors and actuators to share one controller. A key trade-off is manufacturing complexity: the 1.7mm by 2.84mm WLCSP requires controlled stencil and reflow processes, so the package is best suited to production environments with proven small-package assembly capability.
Direkomendasikan
Industrial Condition Monitoring
The STM8L151G6Y3TR is appropriate for industrial monitoring modules that combine local sensing, signal conditioning, and communication under a constrained power budget. Its 16MHz maximum clock supports responsive sampling and control logic, while 32KB of Flash can hold firmware for filtering, event detection, diagnostics, and communication routines. The 41 available I/O ports provide flexibility for digital status inputs, alarm outputs, and external interfaces. For connected equipment, low-power operation can reduce the energy required between measurement intervals, although the complete peripheral configuration must be checked before implementation. The compact WLCSP footprint also helps reduce enclosure size. Confirm the package land pattern, exposed-pad implementation, programming access, and operating-temperature requirements before releasing an industrial product design.
Direkomendasikan
Portable Measurement Instrument
A portable measurement instrument can use the STM8L151G6Y3TR to combine acquisition control, calibration logic, user-interface updates, and data handling in a small board. Its 16MHz clock provides practical throughput for supervisory tasks, while the 32KB Flash stores operating code and calibration parameters. A 1.8V minimum supply voltage supports integration with low-voltage analog and sensor circuitry, provided every rail remains within the specified operating range. The 28-WLCSP body helps reduce overall instrument dimensions, but it also complicates probe access and rework. Use the manufacturer pinout and package drawing for PCB implementation, and plan test pads that remain accessible after the device is assembled and encapsulated.
Direkomendasikan
Wearable Accessory Controller
The STM8L151G6Y3TR suits wearable accessories that require local control in a very small enclosure. Its compact 28-WLCSP package preserves board area for a battery, radio interface, sensor, or actuator, while the 16MHz 8-bit processor handles button input, state-machine logic, and periodic status updates. The 1.8V to 3.6V supply range supports low-voltage power architectures commonly used in compact wearables. Low-power modes should be selected around the intended duty cycle to maximize battery life between interactions. Designers must account for small-package solder assembly, limited visual inspection, and the need for appropriate test access. Confirm all peripheral requirements, programming connections, and package-specific handling instructions in the STM8L151G6 manufacturer documentation before tooling the PCB.
Direkomendasikan
Low-Power Home Automation Node
The STM8L151G6Y3TR can serve as the local controller in a compact home-automation node that handles switches, sensors, indicators, and low-speed communication. Its 16MHz processing rate is sufficient for deterministic supervisory logic, and 32KB of Flash provides a practical firmware budget for protocol handling and state management. The large I/O count helps reduce the number of companion components in a multi-input node. Low-power behavior is particularly important for installations that operate from local energy harvesting or small batteries. Select the MCU power modes and peripheral clocks according to the expected idle interval, then verify startup timing and communication behavior. The principal engineering compromise is assembly complexity, because the 1.7mm by 2.84mm WLCSP demands stricter manufacturing control than a larger leaded or leadless MCU package.
Direkomendasikan
Compact Appliance Controller
The STM8L151G6Y3TR is useful in compact appliance controllers where board area is constrained but deterministic control is required. It can supervise buttons, relays, indicators, and protective interlocks at up to 16MHz while operating from a 1.8V to 3.6V supply. The 32KB Flash capacity is suitable for control firmware and configuration data, and the 41 I/O ports provide ample digital connectivity. Low-power modes can reduce consumption when the appliance is idle, though safety-related behavior and relay-driving circuitry remain external to the MCU. Before layout, confirm the exact pin multiplexing, maximum I/O conditions, and package land pattern in the STM8L151G6 datasheet. Validate the WLCSP assembly process early because stencil, stencil aperture, and inspection decisions can materially affect yield.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk STM8L151G6Y3TR — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | STM8L152G6Y3TR |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 28-WLCSP (1.7mm x 2.84mm) | 28-WLCSP (1.7mm x 2.84mm) |
| Product Type | 8-bit ultra-low-power microcontroller | 8-bit ultra-low-power microcontroller |
| Maximum Clock Frequency | 16 MHz | 16 MHz |
| Flash Memory | 32 KB | 32 KB |
| Supply Voltage Range | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| I/O Port Count | 41 | 41 |
| Program Memory Type | Flash | Flash |
Diferensiator Kunci
- Compact 28-WLCSP implementation (vsSTM8L152G6Y3TR)
- Directly identified STM8L151G6 configuration (vsSTM8L152G6Y3TR)
- Small 1.7mm by 2.84mm board footprint (vsSTM8L151K6T6)
Catatan Desain
Use the STM8L151G6 manufacturer land pattern for the 28-WLCSP rather than constructing a footprint from the body dimensions alone. Confirm pad locations, pad numbering, exposed-pad geometry, solder-mask clearance, and paste apertures before fabrication. The 1.7mm by 2.84mm package has very little physical margin, so even a small routing error can create an open or bridged connection.
Place the device close to its power-supply and ground connections, then route high-current and fast-switching signals away from sensitive control traces. Use the manufacturer's recommended bypass configuration and provide a direct ground path beneath or near the package where the layout guidance permits it. Separate analog inputs from clock, programming, and switching-node routing to reduce coupling in precision measurement products.
Do not assume that every STM8L151 or STM8L152 order code is a mechanical substitute. The package suffix changes the body and pin count, and related MCU families can differ in peripheral availability, software support, and programming details. For a proposed replacement, compare the complete pin table, power architecture, clock plan, communication peripherals, exposed pad, and operating-temperature requirements against the original design.
Design the 1.8V to 3.6V supply path for both average and peak embedded-processing demand. Confirm rail accuracy, startup sequencing, and the voltage present at the device pins rather than relying only on the nominal source voltage. Use local bypass capacitors and short return paths to limit supply disturbance during clock transitions, particularly when the WLCSP is surrounded by analog, radio, or display circuitry.
Informasi Konformitas
The manufacturer product page identifies the STM8L151G6 family as active but does not expose explicit compliance conclusions in the available material.