STMicroelectronics

STM8L151G6Y3TR - 16MHz 32KB Low-Power MCU | STMicroelectronics

MPN: STM8L151G6Y3TR ✓ فعال
1.8 V to 3.6 V Vdss 28-pin WLCSP Package 16 MHz Speed 32 KB (32K x 8 bits) Memory
MOQ: 1 |

STM8L151G6Y3TR جائزہ

STMicroelectronics STM8L151G6Y3TR is an ultra-low-power 8-bit STM8L microcontroller operating at up to 16MHz, with 32KB of Flash memory and a 28-WLCSP package measuring 1.7mm by 2.84mm. It is designed for compact embedded systems that require efficient processing, low-power operation, and a very small board footprint.

An ultra-low-power microcontroller is an integrated circuit optimized to minimize energy consumption while executing control tasks. The STM8L family belongs to the broader microcontroller, embedded-processing, and semiconductor hierarchies. These devices are particularly useful for battery-powered equipment, sensor interfaces, portable instruments, and connected products in which the combination of processing capability, fast wake-up behavior, and compact packaging simplifies system integration.

The STM8L151G6Y3TR combines a 16MHz maximum clock with 32KB of Flash memory, 41 I/O ports, and operation from a 1.8V to 3.6V supply range. Its 2.5V and 3.3V operating points align with conventional low-voltage embedded systems. The STM8L EnergyLite architecture emphasizes low-power execution, allowing designers to balance responsive control behavior against the energy budget of a battery-operated product.

The 28-WLCSP package is the principal mechanical distinction of this ordering code. Its 1.7mm by 2.84mm body permits a compact layout but requires careful PCB design, fine-pitch assembly capability, and close inspection of soldering quality. The complete pin assignment, exposed-pad requirements, and recommended land pattern should be taken directly from the STM8L151G6 datasheet and its package drawing before the PCB is released for fabrication.

Typical uses include compact sensor nodes, industrial condition-monitoring modules, low-power measurement instruments, wearable accessories, and small appliance controllers. In these systems, the 16MHz processing rate supports responsive control logic, while the 32KB Flash capacity accommodates firmware, configuration data, and basic application routines. The low supply-voltage range also makes the device suitable for systems using energy-harvesting or regulated low-voltage power sources.

A critical layout consideration is the WLCSP assembly process. Use the manufacturer land pattern, verify solder-paste release and stencil apertures for the selected assembly method, and plan probe access before volume production. Allow appropriate thermal and copper arrangements around the device, and avoid placing tall components where they could interfere with reflow inspection or assembly tooling.

This product page consolidates the verified device identity, package details, technical characteristics, sourcing guidance, and application-oriented design considerations. It also distinguishes genuine same-package alternatives from related devices that require a different footprint, helping engineers evaluate replacement options without assuming that similar specifications imply drop-in compatibility.

کے لیے ڈراپ اِن متبادل STM8L151G6Y3TR — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

STM8L152G6Y3TR

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 28-WLCSP (1.7mm x 2.84mm)
Related STM8L152 MCU with additional family hardware capability; 16MHz clock and 32KB Flash are retained, while peripheral/software requirements require final verification

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

STM8L151G6Y3TR زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 8-bit ultra-low-power microcontroller
Product Series STM8L EnergyLite
زیادہ سے زیادہ کلاک فریکوئنسی 16 MHz
Flash Memory 32 KB (32K x 8 bits)
Program Memory Type Flash
Supply Voltage Range 1.8 V to 3.6 V
Nominal Supply Voltage Points 2.5 V and 3.3 V
I/O Port Count 41
Package Type 28-pin WLCSP
Package Dimensions 1.7 mm x 2.84 mm
Architecture 8-bit CISC
Lifecycle Stage Active
ماؤنٹنگ ٹائپ Surface mount

STM8L151G6Y3TR 1.7 mm x 2.84 mm پن کنفیگریشن گائیڈ

STM8L151G6Y3TR (1.7 mm x 2.84 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

STM8L151G6Y3TR کے لیے 1.7 mm x 2.84 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں STM8L151G6Y3TR.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

STM8L151G6Y3TR کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered Sensor Node, Industrial Condition Monitoring, Portable Measurement Instrument, Wearable Accessory Controller, Low-Power Home Automation Node, Compact Appliance Controller.

🧩

Battery-Powered Sensor Node

The STM8L151G6Y3TR fits compact battery-powered sensor nodes because it combines a 16MHz 8-bit core with a 1.8V to 3.6V operating range in a 28-WLCSP package. It can manage sensor reads, threshold logic, local status indication, and periodic communication without occupying a large PCB area. Configure the STM8L low-power modes around the measurement interval rather than leaving the processor continuously active. The 32KB Flash capacity provides room for the main control loop and configuration tables, while the 41 I/O ports allow multiple digital sensors and actuators to share one controller. A key trade-off is manufacturing complexity: the 1.7mm by 2.84mm WLCSP requires controlled stencil and reflow processes, so the package is best suited to production environments with proven small-package assembly capability.

🏭

Industrial Condition Monitoring

The STM8L151G6Y3TR is appropriate for industrial monitoring modules that combine local sensing, signal conditioning, and communication under a constrained power budget. Its 16MHz maximum clock supports responsive sampling and control logic, while 32KB of Flash can hold firmware for filtering, event detection, diagnostics, and communication routines. The 41 available I/O ports provide flexibility for digital status inputs, alarm outputs, and external interfaces. For connected equipment, low-power operation can reduce the energy required between measurement intervals, although the complete peripheral configuration must be checked before implementation. The compact WLCSP footprint also helps reduce enclosure size. Confirm the package land pattern, exposed-pad implementation, programming access, and operating-temperature requirements before releasing an industrial product design.

🔧

Portable Measurement Instrument

A portable measurement instrument can use the STM8L151G6Y3TR to combine acquisition control, calibration logic, user-interface updates, and data handling in a small board. Its 16MHz clock provides practical throughput for supervisory tasks, while the 32KB Flash stores operating code and calibration parameters. A 1.8V minimum supply voltage supports integration with low-voltage analog and sensor circuitry, provided every rail remains within the specified operating range. The 28-WLCSP body helps reduce overall instrument dimensions, but it also complicates probe access and rework. Use the manufacturer pinout and package drawing for PCB implementation, and plan test pads that remain accessible after the device is assembled and encapsulated.

📱

Wearable Accessory Controller

The STM8L151G6Y3TR suits wearable accessories that require local control in a very small enclosure. Its compact 28-WLCSP package preserves board area for a battery, radio interface, sensor, or actuator, while the 16MHz 8-bit processor handles button input, state-machine logic, and periodic status updates. The 1.8V to 3.6V supply range supports low-voltage power architectures commonly used in compact wearables. Low-power modes should be selected around the intended duty cycle to maximize battery life between interactions. Designers must account for small-package solder assembly, limited visual inspection, and the need for appropriate test access. Confirm all peripheral requirements, programming connections, and package-specific handling instructions in the STM8L151G6 manufacturer documentation before tooling the PCB.

🧩

Low-Power Home Automation Node

The STM8L151G6Y3TR can serve as the local controller in a compact home-automation node that handles switches, sensors, indicators, and low-speed communication. Its 16MHz processing rate is sufficient for deterministic supervisory logic, and 32KB of Flash provides a practical firmware budget for protocol handling and state management. The large I/O count helps reduce the number of companion components in a multi-input node. Low-power behavior is particularly important for installations that operate from local energy harvesting or small batteries. Select the MCU power modes and peripheral clocks according to the expected idle interval, then verify startup timing and communication behavior. The principal engineering compromise is assembly complexity, because the 1.7mm by 2.84mm WLCSP demands stricter manufacturing control than a larger leaded or leadless MCU package.

⚡

Compact Appliance Controller

The STM8L151G6Y3TR is useful in compact appliance controllers where board area is constrained but deterministic control is required. It can supervise buttons, relays, indicators, and protective interlocks at up to 16MHz while operating from a 1.8V to 3.6V supply. The 32KB Flash capacity is suitable for control firmware and configuration data, and the 41 I/O ports provide ample digital connectivity. Low-power modes can reduce consumption when the appliance is idle, though safety-related behavior and relay-driving circuitry remain external to the MCU. Before layout, confirm the exact pin multiplexing, maximum I/O conditions, and package land pattern in the STM8L151G6 datasheet. Validate the WLCSP assembly process early because stencil, stencil aperture, and inspection decisions can materially affect yield.

What are the key specifications of STM8L151G6Y3TR that engineers should know?
The STM8L151G6Y3TR is a 32KB-Flash, 16MHz, ultra-low-power 8-bit STM8L microcontroller in a 28-WLCSP package measuring 1.7mm by 2.84mm. The device has 41 I/O ports and supports a 1.8V to 3.6V supply range. According to the STMicroelectronics STM8L151G6 product page, it belongs to the medium-density STM8L151x4/6 device family. Its compact package makes it particularly useful for space-constrained low-power embedded products.
Where can I download the STM8L151G6Y3TR datasheet PDF?
The official STM8L151G6Y3TR documentation is available through the STMicroelectronics STM8L151G6 product page. The manufacturer page provides the product overview and access to the applicable technical documentation, including the package pinout and electrical characteristics. Use the manufacturer datasheet as the authority for final PCB routing, programming, decoupling, and assembly requirements rather than relying on distributor summaries.
Where can I find the STM8L151G6Y3TR pinout?
The STM8L151G6Y3TR pinout is defined in the STM8L151G6 manufacturer datasheet and its associated package drawing. This ordering code uses a 28-WLCSP package with a body size of 1.7mm by 2.84mm. Consult the pin-description table and recommended land pattern before assigning tracks, since the small package presents fine-pitch routing and assembly challenges. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks.
What is the operating voltage of STM8L151G6Y3TR?
The STM8L151G6Y3TR operates from 1.8V to 3.6V, with catalog descriptions also identifying 2.5V and 3.3V as practical supply levels. According to the STM8L151G6 product information, this range supports conventional low-voltage embedded systems. Design the power rail so it remains within the device limits across startup, load changes, and temperature, and use the manufacturer recommendations for local bypass capacitors.
How much Flash memory and processing speed does STM8L151G6Y3TR provide?
The STM8L151G6Y3TR provides 32KB of Flash memory and operates at up to 16MHz. These figures make the device suitable for compact firmware that combines control logic, communication routines, and configuration handling. The manufacturer identifies the part as an 8-bit STM8L CISC microcontroller. Confirm RAM, EEPROM, and peripheral requirements against the STM8L151G6 datasheet before finalizing the memory budget.
Is STM8L151G6Y3TR suitable for battery-powered sensor nodes?
The STM8L151G6Y3TR is suitable for battery-powered sensor nodes when its low-power modes and wake-up behavior are configured for the application's duty cycle. Its 1.8V minimum operating voltage is compatible with regulated low-voltage power systems, while the 16MHz clock supports responsive foreground processing. The key trade-off is the 28-WLCSP assembly requirement, which can complicate low-volume manufacturing compared with a leaded package.
What can replace STM8L151G6Y3TR on the same PCB?
The STM8L152G6Y3TR is the closest same-manufacturer STM8L alternative identified with the same 28-WLCSP class and closely related device definition. A replacement should not be accepted solely from the package name; check every pin, peripheral, power pin, programming interface, and exposed-pad requirement against the manufacturer datasheets. If an exact pin-compatible candidate cannot be confirmed, retain the original footprint and qualification rather than forcing an unverified substitution.
Is STM8L151G6Y3TR the same as STM8L152G6Y3TR?
The STM8L151G6Y3TR and STM8L152G6Y3TR are closely related STM8L devices, but they are not automatically identical in every functional detail. The STM8L152 family includes additional hardware capabilities relative to the STM8L151 family, so software configuration, peripheral availability, and application requirements must be reviewed. The physical package alone does not establish a drop-in replacement without a complete manufacturer pin and function comparison.
When should I choose STM8L151G6Y3TR over a larger-package STM8L151 variant?
Choose the STM8L151G6Y3TR when PCB area is highly constrained and the assembly process can reliably handle a 28-WLCSP with a 1.7mm by 2.84mm body. A larger-package STM8L151 variant may be easier to inspect, hand solder, probe, and assemble, but it will require a different footprint. The selection should balance board area against assembly yield and long-term production access rather than relying on functional similarity alone.
STM8L151G6Y3TR vs STM8L152G6Y3TR - which is better for an embedded design?
The STM8L151G6Y3TR is the more focused choice when the design needs the STM8L151 feature set, while the STM8L152G6Y3TR should be selected when the additional STM8L152 hardware capability is useful. Both are identified within the medium-density STM8L platform and are ordered in compact WLCSP options. Review the exact peripheral differences, programming implications, and lifecycle requirements before making the final choice.
Where can I buy STM8L151G6Y3TR and request current availability?
Use the Request a Quote form on this page to ask about STM8L151G6Y3TR availability, lot handling, and order processing. The manufacturer product page and distributor catalog pages identify the part as an active STM8L microcontroller, but stock and lead time can vary by region, quantity, and date. Send the exact ordering code STM8L151G6Y3TR with your required quantities and packaging expectations in the request.
What is the price of STM8L151G6Y3TR?
Submit the exact STM8L151G6Y3TR ordering code through the Request a Quote form on this page for current commercial terms. Pricing depends on order quantity, inventory, packaging, and market conditions, so a fixed figure can become inaccurate quickly. The quote request allows the current supply position and applicable quantity breaks to be evaluated for your specific procurement plan.
What is the lead time for STM8L151G6Y3TR?
Request the current lead time through the Request a Quote form on this page and include your required quantity, target date, and approved-source criteria. The device is listed as active, but available lead time depends on stock position and manufacturer allocation. For production planning, request a schedule that covers component allocation, assembly-material readiness, incoming inspection, and any required PCB rework.
Is STM8L151G6Y3TR in stock?
Current STM8L151G6Y3TR inventory should be confirmed through the Request a Quote form on this page. The manufacturer lists the STM8L151G6 family as active, while distributor availability changes with order size and replenishment cycles. Provide the required quantity and production schedule so the quotation can reflect the latest available inventory rather than an outdated listing status.
What design checks are critical for the 28-WLCSP STM8L151G6Y3TR?
The critical checks are land-pattern accuracy, solder-paste control, assembly yield, and verification of every fine-pitch connection. The STM8L151G6Y3TR uses a compact 28-WLCSP body measuring 1.7mm by 2.84mm, so a package-compatible schematic is not enough to guarantee manufacturability. Follow the STM8L151G6 datasheet for pin definitions, exposed-pad treatment, programming access, power routing, and recommended decoupling.

کے لیے انجینئرنگ ریفرنس ڈیٹا STM8L151G6Y3TR — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the STM8L151G6Y3TR when the design needs the STM8L151 feature set, a 16MHz 8-bit core, 32KB of Flash, and a highly compact 28-WLCSP footprint. It is particularly appropriate for battery-powered sensor nodes, portable instruments, home-automation nodes, and small appliance controllers where board area is valuable and the manufacturer can reliably assemble WLCSP devices. Consider the STM8L152G6Y3TR when its additional family hardware capabilities are needed, but verify its complete pin and peripheral compatibility before substitution. The STM8L151K6T6 offers the same general STM8L family and 32KB Flash level in an LQFP-32 package; prefer it only if PCB area is available and easier assembly outweighs the smaller footprint. Because related STM8L order codes use different packages, validate the footprint, programming interface, exposed pad, and peripherals rather than treating similarity as proof of drop-in compatibility.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ STM8L152G6Y3TR
Brand STMicroelectronics STMicroelectronics
Package 28-WLCSP (1.7mm x 2.84mm) 28-WLCSP (1.7mm x 2.84mm)
Product Type 8-bit ultra-low-power microcontroller 8-bit ultra-low-power microcontroller
Maximum Clock Frequency 16 MHz 16 MHz
Flash Memory 32 KB 32 KB
Supply Voltage Range 1.8 V to 3.6 V 1.8 V to 3.6 V
I/O Port Count 41 41
Program Memory Type Flash Flash

اہم امتیازی خصوصیات

  • Compact 28-WLCSP implementation (بمقابلہSTM8L152G6Y3TR)
  • Directly identified STM8L151G6 configuration (بمقابلہSTM8L152G6Y3TR)
  • Small 1.7mm by 2.84mm board footprint (بمقابلہSTM8L151K6T6)

ڈیزائن نوٹس

Use the STM8L151G6 manufacturer land pattern for the 28-WLCSP rather than constructing a footprint from the body dimensions alone. Confirm pad locations, pad numbering, exposed-pad geometry, solder-mask clearance, and paste apertures before fabrication. The 1.7mm by 2.84mm package has very little physical margin, so even a small routing error can create an open or bridged connection.

Place the device close to its power-supply and ground connections, then route high-current and fast-switching signals away from sensitive control traces. Use the manufacturer's recommended bypass configuration and provide a direct ground path beneath or near the package where the layout guidance permits it. Separate analog inputs from clock, programming, and switching-node routing to reduce coupling in precision measurement products.

Do not assume that every STM8L151 or STM8L152 order code is a mechanical substitute. The package suffix changes the body and pin count, and related MCU families can differ in peripheral availability, software support, and programming details. For a proposed replacement, compare the complete pin table, power architecture, clock plan, communication peripherals, exposed pad, and operating-temperature requirements against the original design.

Design the 1.8V to 3.6V supply path for both average and peak embedded-processing demand. Confirm rail accuracy, startup sequencing, and the voltage present at the device pins rather than relying only on the nominal source voltage. Use local bypass capacitors and short return paths to limit supply disturbance during clock transitions, particularly when the WLCSP is surrounded by analog, radio, or display circuitry.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer product page identifies the STM8L151G6 family as active but does not expose explicit compliance conclusions in the available material.

متعلقہ تلاشیں

STM8L151G6Y3TR datasheet STM8L151G6Y3TR pinout STM8L151G6Y3TR datasheet pdf STM8L151G6Y3TR specifications STM8L151G6 28-WLCSP microcontroller STM8L151G6Y3TR price STM8L151G6Y3TR stock STM8L151G6Y3TR equivalent STM8L151G6Y3TR replacement STM8L151G6Y3TR footprint STM8L151G6Y3TR schematic STM8L151G6Y3TR vs STM8L152G6Y3TR STMicroelectronics STM8L151G6Y3TR

متعلقہ اجزاء اور اصطلاحات

STMicroelectronics STM8L151G6Y3TR STM8L152G6Y3TR STM8L151G6 STM8L151x4/6 STM8L EnergyLite STM8L 8-bit microcontroller embedded microcontroller CISC architecture ultra-low-power MCU Flash memory 28-WLCSP WLCSP package family surface-mount package 16 MHz 32 KB Flash 41 I/O ports 1.8 V to 3.6 V supply battery-powered sensor node industrial condition monitoring portable measurement instrument wearable accessory controller low-power home automation
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں