Microchip Technology

SY88773VMI - 3.2Gbps CML Limiting Postamplifier | Microchip

MPN: SY88773VMI ✗ Akhir Hidup
3.3V or 5V Vdss 16-MLF (3x3 mm) Package CML Speed
MOQ: 1 |

SY88773VMI Ringkasan

The Microchip Technology SY88773VMI is a 3.3V/5V, 3.2Gbps CML low-power limiting postamplifier with TTL loss-of-signal output, housed in a 16-MLF 3x3 mm surface-mount package. It is designed for high-speed fiber-optic receiver signal chains, where it restores amplitude-limited CML data and provides a separate TTL-compatible loss-of-signal indication.

A limiting postamplifier is a specialized amplifier IC used after a photodiode or transimpedance amplifier in optical communications equipment. Its position in the receiver path is between the front-end detector stage and the clock-and-data-recovery circuitry. The SY88773VMI combines signal conditioning, amplitude limiting, and loss-of-signal monitoring in one compact integrated circuit, supporting dense optical-network equipment designs.

Key features include operation from 3.3V or 5V, data rates up to 3.2Gbps, and a CML interface suitable for high-speed optical modules. The TTL loss-of-signal output gives the surrounding system an independent indication that the recovered signal has fallen outside the usable operating range. Its 16-MLF package is only 3x3 mm, helping conserve board area in compact optical transceivers.

The limiting stage is intended to provide a stable digital output when the upstream receiver produces a sufficiently large signal but clean up residual amplitude variation at the decision point. CML signaling is appropriate for high-speed point-to-point links because it supports high data rates and helps maintain controlled signal levels. System-level performance still depends on the preceding detector, equalization, termination, and clock-and-data-recovery circuitry.

Typical applications include SONET, SDH, and other optical-network receiver subsystems, as well as high-speed optical-module designs where a compact limiting postamplifier and independent TTL loss-of-signal status are useful. The device can also be evaluated in laboratory receiver prototypes when the data rate and optical front end are compatible with its operating characteristics.

PCB implementation requires careful treatment of high-speed differential signals. Keep CML routing short and symmetric, provide the correct impedance environment, and place bypass and termination components close to their associated pins. Review the manufacturer's pin description and recommended application circuit before assigning tracks, especially around supply, ground, and loss-of-signal connections.

This product record combines the exact package and interface identifiers with application-focused guidance for optical receiver design. It also distinguishes a genuine replacement requirement from ordinary functional equivalence: a candidate must use the same 16-MLF footprint, preserve pin-to-pin connectivity, and meet the relevant data-rate and interface requirements before it can be considered drop-in compatible.

Alternatif penggantian untuk SY88773VMI — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

SY88773VMI Rating Maksimal & Karakteristik Listrik

Product Type Limiting postamplifier IC
Manufacturer Microchip Technology
Supported Supply Voltage 3.3V or 5V
Maximum Data Rate 3.2 Gbps
High-Speed Output Interface CML
Loss-of-Signal Output TTL-compatible
Power Class Low-power
Application Fiber-optic receiver signal conditioning
Paket 16-MLF (3x3 mm)
Tipe Mounting Surface mount
Jumlah Pin 16 pins

SY88773VMI 16-mlf (3x3 mm) Diamant Konfigurasi Panduan

Konfigurasi pin untuk SY88773VMI (16-mlf (3x3 mm) pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 16-mlf (3x3 mm) untuk SY88773VMI

Tidak ada data diatribut pin yang tersedia untuk SY88773VMI.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

SY88773VMI cocok untuk 6 aplikasis: Fiber-Optic Receiver Signal Conditioning, SONET Optical Receiver Subsystems, SDH Optical Receiver Modules, High-Speed Optical Transceiver Modules, Optical-Link Test Equipment, Legacy Networking Equipment Maintenance.

🌐

Fiber-Optic Receiver Signal Conditioning

The SY88773VMI fits directly after a photodiode or transimpedance amplifier in a high-speed optical receiver because it performs the limiting postamplifier function and delivers the result through a CML output. Its maximum data rate of 3.2Gbps makes it appropriate for legacy 2.5Gbit/s-class receiver paths and other optical links operating within the manufacturer-defined limits. The TTL loss-of-signal output adds a useful monitoring function without occupying a separate indicator IC. Because this is a low-power device in a 16-MLF 3x3 mm package, it also supports compact transceiver layouts where PCB area and supply consumption are important constraints.

🌐

SONET Optical Receiver Subsystems

The SY88773VMI is suitable for legacy optical-network receiver subsystems requiring a compact limiting stage near the optical front end. Its 3.2Gbps maximum data rate covers the intended high-speed recovery function, while the CML interface provides a standard high-speed output for the following receiver stage. The separate TTL loss-of-signal indication can supervise receiver health at the system level. In a SONET-oriented design, engineers should verify timing, jitter, sensitivity, and supply-distribution requirements against the manufacturer datasheet before release, especially when operating the obsolete part in a maintained or certified system.

🖥️

SDH Optical Receiver Modules

The SY88773VMI can serve as the limiting postamplifier in an SDH-class optical receiver module when the supported link rate, signal levels, and timing margins meet the design requirements. Its low-power 3.3V/5V operation supports compact line-card and transceiver construction, while the 16-MLF package minimizes footprint. The CML output supports connection to subsequent clock-recovery or decision circuitry, and TTL LOS provides a convenient fault-status input. Because the device is discontinued, a new SDH platform should normally use a supported device unless maintaining an installed base, and any substitution must be checked for complete pin and timing compatibility.

📡

High-Speed Optical Transceiver Modules

The SY88773VMI is applicable to the receive side of compact optical transceiver modules where a limiting postamplifier, CML data output, and loss-of-signal status are required in one device. Supporting 3.3V and 5V operation allows alignment with different module supply architectures, while the 3x3 mm 16-MLF package helps preserve board area. The receiver designer must still provide correct CML termination, low-impedance supply routing, stable reference planes, and an adequate thermal path. For new transceiver platforms, confirm current product availability before committing the obsolete SY88773VMI to a production BOM.

🔧

Optical-Link Test Equipment

The SY88773VMI can be incorporated into laboratory optical-link test equipment when a receiver subsection requires amplification, limiting, and signal-loss monitoring in a compact area. The CML output can drive compatible test electronics, while TTL LOS gives the tester a direct indication of the recovered input state. Its 3.2Gbps rate supports high-speed test scenarios rather than low-speed diagnostic links. Instrument designers should account for the exact input sensitivity, jitter contribution, propagation delay, and output levels stated in the manufacturer datasheet, and should validate channel losses across temperature before using the part as a generic bench amplifier.

🏭

Legacy Networking Equipment Maintenance

The SY88773VMI is particularly relevant to maintenance and repair of legacy networking equipment whose receiver board was designed around this exact 16-MLF limiting postamplifier. Retaining the established part can avoid respinning a high-speed optical PCB and preserve the original CML and TTL loss-of-signal behavior. Engineers should request current inventory and traceability information, inspect each device, and confirm the exact MPN before installation. A substitute should be considered only after comparing the terminal assignment, package geometry, electrical performance, and timing behavior because cross-reference search results alone do not establish drop-in compatibility.

Ringkasan Produk Direkomendasikan

MCP6071-I/SN Low-power amplifier used in receiver front-end design Digunakan di dalam: Fiber-Optic Receiver Signal Conditioning ISL8488IPZ Renesas Electronics Digunakan di dalam: Fiber-Optic Receiver Signal Conditioning, SONET Optical Receiver Subsystems, Optical-Link Test Equipment SI3050-E-GT Silicon Labs Digunakan di dalam: SONET Optical Receiver Subsystems SI3201-GSR Silicon Laboratories Digunakan di dalam: SDH Optical Receiver Modules SI2438-B-FTR Skyworks Solutions Digunakan di dalam: SDH Optical Receiver Modules SI3056-D-FS Skyworks Solutions Digunakan di dalam: High-Speed Optical Transceiver Modules, Legacy Networking Equipment Maintenance MCP6072-I/SN Low-power amplifier suitable for front-end signal paths Digunakan di dalam: High-Speed Optical Transceiver Modules, Optical-Link Test Equipment SI3493-C-FSR Communication interface device for legacy system control Digunakan di dalam: Legacy Networking Equipment Maintenance
What is the SY88773VMI?
The SY88773VMI is a Microchip Technology low-power limiting postamplifier IC for fiber-optic receivers. According to the manufacturer datasheet, it accepts a high-speed signal, provides a CML output, supports data rates up to 3.2Gbps, and includes a TTL-compatible loss-of-signal output. It is packaged in a compact 16-MLF 3x3 mm surface-mount package for optical-network receiver circuitry.
What is the operating voltage of SY88773VMI?
The SY88773VMI supports both 3.3V and 5V operation. According to the manufacturer datasheet, the dual-rail selection allows the device to be used in systems built around either common fiber-optic transceiver supply level. Use the pin-description table and recommended application circuit when assigning supply pins, and verify the voltage-dependent performance limits before finalizing the PCB power architecture.
What is the maximum data rate of SY88773VMI?
The SY88773VMI supports data rates up to 3.2Gbps. According to the manufacturer datasheet, this rate applies to its limiting postamplifier and CML output function in fiber-optic receiver applications. The overall link margin also depends on the photodiode, transimpedance amplifier, channel loss, clock-and-data-recovery device, PCB routing, and termination arrangement.
Where can I download the SY88773VMI datasheet PDF?
The SY88773VMI datasheet PDF is available through the linked datasheet document and through the Microchip product information indexed for this exact MPN. According to the manufacturer datasheet, the document describes the 3.3V/5V low-power limiting postamplifier, its 3.2Gbps CML operation, TTL loss-of-signal function, package details, and application information. Use the pin-description table before PCB routing.
Where can I find the SY88773VMI pinout?
The SY88773VMI pinout is defined in the pin-description section of the manufacturer datasheet. The device uses a 16-MLF 3x3 mm package with 16 numbered terminals. Consult the package drawing for terminal numbering, exposed-pad requirements, and recommended land pattern. The SY88773VMI page links to the datasheet, which should be used as the authoritative source for each signal and supply connection.
Is the SY88773VMI suitable for optical receivers?
Yes, the SY88773VMI is specifically designed for high-speed optical receiver signal chains. According to the manufacturer datasheet, the device is a low-power limiting postamplifier with CML output and TTL loss-of-signal indication. It is placed after the optical detection and initial amplification stage, where its limiting function restores the digital signal amplitude before downstream clock-and-data-recovery circuitry.
What does the TTL LOS output on SY88773VMI do?
The TTL-compatible loss-of-signal output on the SY88773VMI indicates when the amplifier no longer detects a usable input condition. According to the manufacturer datasheet, the SY88773VMI combines this status function with its limiting and CML output functions in one package. The host system can use LOS for path monitoring, fault reporting, or receiver-state management, subject to the pin-specific logic requirements.
Where can I buy SY88773VMI online?
Use the Request a Quote form on this page to request the SY88773VMI, current stock position, minimum order quantity, and delivery schedule. The exact MPN is a discontinued Microchip Technology limiting postamplifier in a 16-MLF package, so availability may depend on remaining factory or channel inventory. Request the package suffix, quantity, and inspection requirements with your inquiry.
What is the lead time for SY88773VMI?
The current lead time for SY88773VMI should be confirmed through the Request a Quote form on this page. Because this exact Microchip Technology part is marked discontinued, its schedule may depend on remaining inventory rather than normal production allocation. Include the required quantity, reel format, target date, and any traceability or inspection requirements when requesting a quotation and delivery commitment.
Is SY88773VMI in stock?
Stock for SY88773VMI changes by quantity and inventory channel, so the current position must be confirmed through the Request a Quote form on this page. The manufacturer has discontinued the exact device, which makes lot availability and traceability important considerations for optical-network and legacy equipment maintenance. Specify whether full-reel quantities, cut tape, or small maintenance quantities are required.
What are the key specifications of SY88773VMI that engineers should know?
The principal SY88773VMI specifications are 3.3V/5V operation, a maximum data rate of 3.2Gbps, CML high-speed output, TTL-compatible loss-of-signal indication, and a 16-MLF 3x3 mm package. According to the manufacturer datasheet, the device is a low-power limiting postamplifier intended for fiber-optic receiver signal conditioning. Detailed gain, input sensitivity, jitter, and timing specifications should be taken directly from the datasheet.
Is SY88773VMI the same as SY88773VMG?
The SY88773VMI and SY88773VMG are not automatically interchangeable because their final suffix codes identify different orderable variants or package configurations. Only the manufacturer pin description and package drawing can confirm whether the mounting form and exposed-pad arrangement are identical. Treat SY88773VMG as a comparison candidate rather than a drop-in replacement until the exact package dimensions, pinout, and ordering information have been compared.
What can replace SY88773VMI?
No confirmed drop-in replacement for SY88773VMI is identified in the available cross-reference results. A valid replacement must match the 16-MLF 3x3 mm footprint, preserve pin-to-pin connectivity, support the required 3.3V or 5V supply, provide the required CML interface, and meet the receiver's data-rate and loss-of-signal timing requirements. Request legacy sourcing support if an obsolete exact replacement is required.
What is the best Microchip equivalent for SY88773VMI?
No Microchip cross-reference result confirms a pin-compatible equivalent for SY88773VMI. The manufacturer cross-reference search tool can identify comparable products, but a functional match alone is insufficient for board replacement. Confirm package dimensions, terminal mapping, CML voltage levels, TTL LOS behavior, operating speed, and supply requirements before accepting any candidate as a drop-in substitute.
SY88773VMI vs a limiting postamplifier replacement: which is better for optical networking?
SY88773VMI is preferable when the existing optical receiver was designed specifically around its 3.3V/5V operation, CML output, TTL loss-of-signal behavior, and 16-MLF footprint. A replacement is preferable only when it satisfies those mechanical and electrical requirements and remains available for production. According to the manufacturer datasheet, preserving the receiver's established interface generally reduces redesign, simulation, and qualification risk.
When should I choose SY88773VMI for a high-speed optical design?
Choose SY88773VMI when maintaining a legacy fiber-optic receiver requires the established 3.2Gbps-class limiting function, CML data output, TTL loss-of-signal indication, and 16-MLF land pattern. According to the manufacturer datasheet, the part was designed for optical-network receivers. For new production, first confirm lifecycle availability and obtain a quotation; otherwise, evaluate a currently supported receiver IC as a deliberate redesign.
Can SY88773VMI replace an equivalent optical postamplifier without PCB changes?
SY88773VMI can replace another IC without PCB changes only when both devices have the same 16-MLF footprint, identical terminal numbering, compatible CML output levels, equivalent TTL LOS behavior, and acceptable operating speed. According to the manufacturer datasheet, SY88773VMI is a 3.2Gbps limiting postamplifier, but matching that headline rate alone does not establish full pin compatibility. Complete a detailed datasheet comparison before ordering a substitute.

Data referensi engineering untuk SY88773VMI — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose SY88773VMI when maintaining an established optical receiver board that specifically uses its 16-MLF footprint, CML output, TTL loss-of-signal function, and 3.2Gbps-class limiting behavior. It is particularly useful for repairing legacy fiber-optic equipment because an exact mechanical and functional match can avoid a high-speed PCB redesign. For new production, request lifecycle confirmation and inventory before selecting this obsolete part; a currently supported receiver IC may be preferable despite the redesign effort. Do not choose a candidate merely because it is described as a limiting postamplifier. Verify package dimensions, exposed-pad construction, pin numbering, CML levels, TTL LOS polarity, timing, jitter, input sensitivity, and supply current against the manufacturer datasheet. If no exact replacement can be demonstrated, preserve the original design and source the obsolete MPN with suitable inspection and traceability.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini
Package 16-MLF (3x3 mm)
Brand Microchip Technology
Product Type Limiting postamplifier IC
Supported Supply Voltage 3.3V or 5V
Maximum Data Rate 3.2 Gbps
High-Speed Output Interface CML
Loss-of-Signal Output TTL-compatible
Power Class Low-power
Target Application Fiber-optic receiver signal conditioning
Lifecycle Status Obsolete

Diferensiator Kunci

  • Integrated receiver monitoring (vsGeneric low-power amplifier)
  • Space-efficient optical receiver integration (vsLarger-package limiting postamplifier)
  • Dual common supply options (vsSingle-supply limiting amplifier)

Catatan Desain

Route the CML signal path as a short, symmetric differential connection and provide the termination arrangement specified by the manufacturer application circuit. Keep high-speed nodes away from supply-routing discontinuities and ground-plane edges. The 16-MLF footprint is compact, so escape routing should be planned before component placement to avoid long copper stubs and unnecessary impedance discontinuities.

Assign the board footprint from the official 16-MLF package drawing, including exposed-pad, solder-mask, paste, and thermal-via requirements. Do not infer the land pattern from a generic 16-pin QFN library entry. Verify pin-one orientation and the distinction between the package terminal numbering and the schematic symbol before fabrication to prevent an irreversible high-speed layout error.

Follow the manufacturer supply and decoupling recommendations when operating from either 3.3V or 5V. Place bypass components close to the supply terminals, maintain a continuous return path, and avoid sharing narrow neck regions between sensitive input/output routing and unrelated digital currents. Confirm the actual supply current and tolerance requirements from the datasheet before sizing the power-distribution network.

Do not treat a general-purpose limiting amplifier as a drop-in replacement without checking terminal mapping, CML output levels, TTL LOS polarity and timing, data rate, and package dimensions. Also confirm whether a candidate suffix denotes a different package form or ordering option. For the obsolete SY88773VMI, preserve traceability and perform appropriate incoming inspection when using remaining inventory in a maintained system.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

No definitive environmental or automotive qualification status was identified for this discontinued MPN. Confirm material declarations and qualification records with Microchip Technology before use in regulated or automotive applications.

Pencarian Terkait

SY88773VMI SY88773VMI datasheet SY88773VMI datasheet pdf SY88773VMI pinout SY88773VMI schematic SY88773VMI equivalent SY88773VMI replacement SY88773VMI cross reference SY88773VMI price SY88773VMI stock Microchip SY88773VMI SY88773VMI 16-MLF pinout SY88773VMI optical receiver SY88773VMI 3.2Gbps CML

Komponen dan Istilah Terkait

Microchip Technology SY88773VMI SY88773VMG limiting postamplifier special-purpose amplifier IC fiber-optic receiver optical network CML output TTL loss of signal 3.2 Gbps data rate 3.3 V power supply 5 V power supply low-power IC 16-MLF package 3x3 mm surface-mount package MLF package family surface-mount technology semiconductor signal conditioning clock and data recovery photodiode transimpedance amplifier
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ