Microchip Technology

SY88903VKI - 1.25Gbps Limiting Postamplifier | Microchip

MPN: SY88903VKI ✓ Aktif
3.3 V or 5 V Vdss 10-MSOP Package
MOQ: 1 |

SY88903VKI Ringkasan

The Microchip Technology SY88903VKI is a 1.25 Gbps high-speed limiting postamplifier IC designed for fiber-optic receiver links operating from 3.3 V or 5 V. It accepts a linear signal from a transimpedance amplifier, limits the signal into a digital decision, and provides output stages suitable for PECL-based optical receivers. The device is supplied in a 10-MSOP surface-mount package.

A limiting postamplifier is a signal-conditioning amplifier that follows the transimpedance amplifier in an optical receiver. Its role is to restore usable signal amplitude, reduce amplitude variation, and generate a stable logic decision for clock recovery and data processing. Within the optical-receiver hierarchy, it sits between the transimpedance amplifier and the digital clock-and-data-recovery circuitry, and belongs to the broader class of high-speed amplifier and interface integrated circuits.

The SY88903VKI is optimized for data rates up to 1.25 Gbps and can amplify signals as small as 5 mVpp into signals capable of driving PECL inputs. Operation from either 3.3 V or 5 V allows the same postamplifier architecture to be used across different optical-network and communications equipment generations. Its limiting function converts the amplified signal into a logic-compatible form while the high gain and wide bandwidth support the short rise and fall times required by multigigabit-class links.

The limiting amplifier is intended to operate after a typical fiber-optic transimpedance amplifier. In this arrangement, the transimpedance stage converts photocurrent into a voltage, while the SY88903VKI conditions that voltage and provides a stable digital output. Compared with sending the noisy, variable-amplitude transimpedance output directly to the clock-and-data-recovery block, this stage adds gain and limiting behavior at the point where the signal is most likely to suffer from noise and amplitude drift.

Typical uses include 1.25 Gbps fiber-optic receivers, SONET-class optical network interfaces, PECL-to-TTL interface designs, and other high-speed optical communication equipment. In a complete link, the amplifier supports the receiver path between a photodiode, a transimpedance amplifier, and downstream digital circuitry. Application selection must account for supply voltage, input signal amplitude, logic family, board layout, and the bandwidth required by the intended data rate.

PCB implementation should preserve controlled impedance, minimize loop area between the amplifier and its bypass capacitors, and provide a continuous return path beneath the device where the package and board design permit. Differential and single-ended copper traces should use geometry consistent with the rest of the high-speed channel. Short ground connections and local supply decoupling are especially important because supply disturbance can affect the decision threshold and timing margin of the recovered digital signal.

This product summary combines the device function, verified operating characteristics, package information, sourcing guidance, and engineering considerations into a practical reference for optical-receiver designers. It also identifies the key technical distinctions that must be checked before treating another limiting amplifier as a drop-in replacement.

Alternatif penggantian untuk SY88903VKI — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

SY88903VKI Rating Maksimal & Karakteristik Listrik

Product Type Limiting postamplifier IC
Maximum Data Rate 1.25 Gbps
Supply Voltage Options 3.3 V or 5 V
Minimum Input Signal 5 mVpp
Input Signal Type Linear output from a transimpedance amplifier
Output Compatibility PECL-compatible output
Application High-speed fiber-optic receivers
Paket 10-MSOP
Package Width 3.00 mm
Tipe Mounting Surface mount

SY88903VKI 3.00 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk SY88903VKI (3.00 mm pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 3.00 mm untuk SY88903VKI

Tidak ada data diatribut pin yang tersedia untuk SY88903VKI.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

SY88903VKI cocok untuk 6 aplikasis: 1.25 Gbps Fiber-Optic Receiver, SONET-Class Optical Interface, PECL Output Conditioning, Optical Network Receiver Card, Transimpedance-Amplifier Postprocessing, High-Speed Digital Communications.

🌐

1.25 Gbps Fiber-Optic Receiver

The SY88903VKI fits directly after the transimpedance stage of a 1.25 Gbps fiber-optic receiver because it combines high gain with a wide operating bandwidth. Its limiting action converts the transimpedance amplifier's noisy, variable-amplitude linear output into a stable digital decision for the receiver's clock-and-data-recovery block. The manufacturer specifies operation at data rates up to 1.25 Gbps and sensitivity to signals as small as 5 mVpp. In a complete optical link, this device therefore preserves signal integrity across the difficult analog front end and prepares the waveform for PECL-compatible downstream circuitry.

🌐

SONET-Class Optical Interface

The SY88903VKI can be used in the receive path of a SONET-class optical interface where a transimpedance amplifier produces a small linear signal that must be amplified and limited. Operation up to 1.25 Gbps supports the data-rate range associated with these communications links, while the limiting stage reduces amplitude variation before clock recovery. Its 3.3 V or 5 V operation offers flexibility for different interface generations. Designers should still verify the complete system's jitter, rise-time, voltage-level, and BER requirements rather than treating the amplifier rating as a standalone compliance guarantee.

⚡

PECL Output Conditioning

The SY88903VKI is appropriate for conditioning a small transimpedance-amplifier output before it enters PECL-based digital logic. The Microchip manufacturer datasheet states that signals as small as 5 mVpp can be amplified to drive PECL inputs, providing the essential gain and limiting action between the analog receiver and the digital data path. A practical implementation must preserve controlled impedance and short return paths while providing local supply bypassing. This arrangement improves signal consistency while retaining the straightforward architecture of a transimpedance amplifier followed by a dedicated postamplifier.

🖥️

Optical Network Receiver Card

In an optical network receiver card, the SY88903VKI can perform the final analog amplification and limiting step before data enters the digital processing section. Its high gain and bandwidth are valuable because fiber-optic receiver signals may be small and affected by noise or long-term amplitude variation. The device supports 3.3 V and 5 V systems, allowing it to suit multiple optical-network equipment architectures. Board-level implementation should minimize trace discontinuities, use appropriate high-speed impedance control, and decouple the supply close to the device to protect the logic decision threshold.

🔧

Transimpedance-Amplifier Postprocessing

The SY88903VKI is designed as a dedicated postamplifier for the voltage output produced by a transimpedance amplifier. In this signal chain, the photodiode current becomes a voltage, the transimpedance amplifier performs the first conversion, and the SY88903VKI adds gain and limiting to create a stable digital output. Handling this function in a dedicated stage improves signal consistency without asking the transimpedance amplifier to perform both conversion and final logic conditioning. The operating data rate, input amplitude, common-mode range, and output levels must all be checked together during receiver design.

📡

High-Speed Digital Communications

The SY88903VKI can serve as a signal-conditioning element in high-speed communications equipment requiring a 1.25 Gbps limiting stage. Its wide bandwidth supports rapid transitions, while the limiting action creates a repeatable binary output from a noisy analog waveform. The 5 mVpp input sensitivity is particularly useful when the preceding receiver stage has limited gain or operates at low signal amplitude. In a complete communications design, engineers should evaluate supply noise, channel loss, jitter, logic thresholds, and termination against the manufacturer data sheet before releasing the PCB layout.

Ringkasan Produk Direkomendasikan

SY88903V Base device used for the same limiting-postamplifier function Digunakan di dalam: 1.25 Gbps Fiber-Optic Receiver, SONET-Class Optical Interface, PECL Output Conditioning, Optical Network Receiver Card, Transimpedance-Amplifier Postprocessing, High-Speed Digital Communications SY88903VKI-TR Tape-and-reel ordering variant of the SY88903VKI Digunakan di dalam: 1.25 Gbps Fiber-Optic Receiver, SONET-Class Optical Interface, Optical Network Receiver Card, Transimpedance-Amplifier Postprocessing, High-Speed Digital Communications SY88903VKI Microchip Technology Digunakan di dalam: PECL Output Conditioning
What is the SY88903VKI used for?
The SY88903VKI is a high-speed limiting postamplifier used in fiber-optic receivers operating up to 1.25 Gbps. According to the Microchip manufacturer datasheet, the device follows a transimpedance amplifier, quantizes the linear signal, and produces a logic-compatible output suitable for downstream PECL circuitry. It can process signals as small as 5 mVpp and operates from either 3.3 V or 5 V.
What is the maximum data rate of the SY88903VKI?
The SY88903VKI supports data rates up to 1.25 Gbps. The Microchip manufacturer datasheet describes it as a 5 V or 3.3 V, 1.25 Gbps high-speed limiting postamplifier. Its high gain and wide bandwidth are specifically suited to recovering a stable digital decision from the variable-amplitude output of a transimpedance amplifier in an optical receiver.
Where can I download the SY88903VKI datasheet PDF?
The SY88903VKI datasheet PDF is available from Microchip Technology at the official manufacturer URL for SY88903V. It describes the limiting-amplifier architecture, 1.25 Gbps operating capability, 3.3 V or 5 V supply operation, input sensitivity, electrical characteristics, and application information. Use that document as the controlling reference for connections and design limits before laying out the receiver board.
Where can I find the SY88903VKI pinout?
The SY88903VKI pin assignment is shown in the pin-description and application sections of the Microchip SY88903V manufacturer datasheet. The device is specified in a 10-MSOP package, but the complete pin list must be taken directly from that document rather than inferred from generic MSOP layouts. Assign PCB tracks and bypass connections only after matching each package pin to its named function.
What supply voltage does the SY88903VKI require?
The SY88903VKI supports operation from either 3.3 V or 5 V. According to the Microchip manufacturer datasheet, these supply options accommodate communications equipment based on different generations of PECL interfaces. The selected supply must match the logic-level requirements of the surrounding receiver circuit, and the manufacturer connection and decoupling recommendations should be followed.
How small a signal can the SY88903VKI amplify?
The SY88903VKI can amplify input signals as small as 5 mVpp. The Microchip manufacturer datasheet identifies this capability as useful for postamplification following a transimpedance amplifier in high-speed optical links. The input must also meet the amplifier's specified signal shape, bandwidth, and common-mode requirements, so input amplitude alone does not guarantee reliable operation.
Does the SY88903VKI provide PECL-compatible outputs?
Yes, the SY88903VKI is designed to drive PECL inputs after limiting its input signal. The Microchip manufacturer datasheet describes amplification of signals as small as 5 mVpp into output levels suitable for PECL input circuits. The receiving logic must use compatible supply and termination arrangements, and the datasheet's output-level and termination guidance should be applied.
Where can I buy the SY88903VKI?
Use the Request a Quote form on this page to request the current price, stock status, minimum order quantity, and lead time for the SY88903VKI. The manufacturer part number identifies a 10-MSOP limiting postamplifier, but availability and commercial terms can change. Submit the exact MPN, target quantity, and delivery location in the quote request.
What is the price of the SY88903VKI?
The current commercial price for the SY88903VKI is not published as a static figure in this product record. Use the Request a Quote form on this page for the unit price at the required quantity and for any volume or supply considerations. The form also provides a direct route to confirm current lead time rather than relying on an outdated catalog price.
What is the lead time for the SY88903VKI?
The current lead time should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package availability, and production scheduling, so a historical catalog value may not represent current supply. Include the required quantity, target date, and shipment destination when requesting the quotation.
Is the SY88903VKI in stock?
Current stock for the SY88903VKI should be confirmed through the Request a Quote form on this page. The part is listed as an active Microchip Technology product, but active status does not guarantee inventory for every quantity. A formal quotation establishes the latest stock position, allocation, and expected delivery schedule for the exact MPN.
When should I choose the SY88903VKI for an optical receiver?
Choose the SY88903VKI when the receiver path includes a transimpedance amplifier, operates at up to 1.25 Gbps, and requires a stable decision signal for PECL-based downstream circuitry. Its 5 mVpp input sensitivity, high gain, and 3.3 V or 5 V operation make it appropriate for high-speed optical links. The choice depends on matching the complete receiver signal chain rather than only the nominal data rate.
What can replace the SY88903VKI?
A valid drop-in replacement must use the same 10-MSOP footprint, preserve the exact pin assignments, and match the critical 1.25 Gbps bandwidth, 3.3 V or 5 V supply behavior, input sensitivity, and output-logic requirements. The verified SY88903VKI-TR tape-and-reel ordering code is the same device in a different shipping format, not a distinct functional replacement. For another manufacturer or amplifier family, verify its datasheet and pin map before substitution.
Is the SY88903VKI suitable for SONET and PECL interfaces?
The SY88903VKI is suitable for receiver interfaces that combine a 1.25 Gbps optical link with PECL downstream logic. According to the Microchip manufacturer datasheet, it is intended as a high-speed limiting postamplifier after a typical transimpedance amplifier. Final suitability depends on the specific SONET or PECL standard, system-level jitter budget, and signal-level requirements of the complete design.
What are the key specifications of the SY88903VKI that engineers should know?
The key SY88903VKI specifications are a maximum data rate of 1.25 Gbps, operation from 3.3 V or 5 V, and sensitivity to input signals as small as 5 mVpp. The Microchip manufacturer datasheet identifies the device as a limiting postamplifier with high gain and wide bandwidth, intended to condition the linear output of a fiber-optic transimpedance amplifier and drive PECL-compatible circuitry.
What is the difference between the SY88903VKI and SY88903VKI-TR?
The SY88903VKI and SY88903VKI-TR are ordering variants of the same SY88903V limiting-postamplifier device rather than different electrical designs. The verified product listings identify both as a 10-MSOP limiting postamplifier for optical networks, while the -TR suffix denotes tape-and-reel shipping. Their exact electrical and pin-compatibility details should be confirmed from the manufacturer datasheet and package ordering information.

Data referensi engineering untuk SY88903VKI — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the SY88903VKI when designing a fiber-optic receiver that operates at up to 1.25 Gbps and needs a dedicated limiting stage after the transimpedance amplifier. It is particularly suitable when the incoming signal can be as small as 5 mVpp and downstream circuitry requires a stable PECL-compatible decision. The 3.3 V and 5 V operating options allow use across multiple generations of communications equipment. Before selecting a substitute, verify the exact 10-MSOP pin map, bandwidth, input common-mode range, output voltage levels, supply current, and termination requirements. SY88903VKI-TR is appropriate when tape-and-reel assembly is needed, but it is not a different electrical model. A generic amplifier should be considered only when its complete timing, noise, logic-level, and footprint characteristics have been demonstrated to be equivalent.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini
Product Type Limiting postamplifier IC
Brand Microchip Technology
Package 10-MSOP
Maximum Data Rate 1.25 Gbps
Supply Voltage 3.3 V or 5 V
Minimum Input Signal —
Output Compatibility PECL-compatible output
Application High-speed fiber-optic receivers
Mounting Type Surface mount

Diferensiator Kunci

  • Purpose-built high-speed limiting postamplifier (vsGeneric transimpedance amplifier)
  • Supports two principal supply levels (vsSingle-supply optical postamplifier)
  • Direct PECL output-stage support (vsLinear postamplifier without limiting)

Catatan Desain

Place the input, output, and supply-routing structure for the 10-MSOP device according to the manufacturer's application diagram. Keep the amplifier close to the transimpedance stage so that the small 5 mVpp-class signal is not exposed to unnecessary trace loss or pickup. Use a continuous ground reference where the package and board stack-up permit, and avoid adding test pads or stubs that create discontinuities in the high-speed path.

Provide local supply bypassing between the appropriate power and ground pins using the capacitor arrangement specified in the Microchip manufacturer datasheet. The exact capacitor values and placement requirement should be taken from that document. Keep the supply path short because supply noise can shift the limiting threshold and reduce timing margin in the recovered data stream.

Use controlled-impedance routing for high-speed signal paths and preserve the intended transmission-line environment from the transimpedance amplifier through the limiting stage. Avoid right-angle bends, unnecessary pad stubs, and unprotected branch traces near the amplifier. If the receiver includes long PCB routes, confirm attenuation, reflections, jitter, and crosstalk with the complete channel rather than relying on the nominal 1.25 Gbps capability alone.

Do not treat SY88903VKI and SY88903VKI-TR as different amplifier designs. The -TR designation identifies a tape-and-reel ordering format for the same 10-MSOP device, so changing the suffix does not create a functional upgrade. Conversely, an amplifier in another family should not be called drop-in unless its pin assignments, supply requirements, bandwidth, input sensitivity, output levels, and package dimensions all match.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The verified product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Data disahkan pada: 2026-11-20 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

SY88903VKI datasheet SY88903VKI datasheet pdf SY88903VKI pinout SY88903VKI equivalent SY88903VKI replacement SY88903VKI cross reference SY88903VKI 10-MSOP pinout SY88903VKI 1.25Gbps limiting amplifier SY88903VKI application circuit Microchip SY88903VKI SY88903VKI price SY88903VKI stock

Komponen dan Istilah Terkait

Microchip Technology SY88903VKI SY88903V SY88903VKI-TR limiting postamplifier postamplifier high-speed amplifier amplifier integrated circuit fiber-optic receiver optical network transimpedance amplifier clock and data recovery PECL 1.25 Gbps 5 mVpp 3.3 V 5 V 10-MSOP MSOP package family surface mount SMD high-speed digital communications controlled impedance supply decoupling
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ