Texas Instruments

TAS5110DAPR - 50W Stereo Class D Amplifier | Texas Instruments

MPN: TAS5110DAPR ✓ Aktif
32-pin HTSSOP Package
MOQ: 1 |

TAS5110DAPR Ringkasan

The Texas Instruments TAS5110DAPR is a 2-channel stereo Class D digital audio power amplifier designed for 50 W per channel into a 6 ohm load at 10% THD. It is a true digital audio amplifier power stage using TI Equibit technology and is packaged in a 32-pin HTSSOP. The device delivers 40 W per channel at 0.1% THD, with typical THD+N below 0.09% for a 1 kHz input signal and a dynamic range of 93 dB in the TDAA system.

A Class D audio amplifier is a switching power amplifier that uses pulse-width modulation to represent an audio waveform. Unlike a conventional linear amplifier, its output transistors operate mainly in the saturated and unsaturated states, reducing dissipation and improving power efficiency. The TAS5110 belongs to the digital power-stage hierarchy and requires a compatible digital audio PWM processor to supply its command inputs. It is therefore positioned as the output stage of a true digital audio system rather than as a conventional analog-input amplifier.

The principal performance figures cover continuous power, distortion, and signal-to-noise behavior. Output power reaches 50 W per channel into 6 ohms at 10% THD, while the lower-distortion figure is 40 W per channel at 0.1% THD. Typical THD+N is less than 0.09% with a 1 kHz input signal, and system dynamic range is 93 dB. The stereo architecture supports two independent audio channels in one package, reducing the number of power-stage ICs needed in a multichannel amplifier architecture.

The device uses TI's Equibit technology as part of a true digital audio signal path. Digital command signals drive the internal PWM power stage, reducing sensitivity to analog input-stage distortion and supporting coordinated power management across multiple channels. Integrated short-circuit and thermal protection, mute control, shutdown control, and multiple digital inputs provide the basic controls needed for a robust amplifier module. Exact clock, control-voltage, and timing details should be taken from the manufacturer pin-description and timing tables before PCB implementation.

Typical applications include powered speakers, home-theater and multimedia amplification, professional audio equipment, soundbars, and compact stereo systems requiring high output power from a surface-mount package. The 50 W per-channel capability is most useful with low-impedance speakers, while the 40 W rating at 0.1% THD provides a more conservative operating point for designs that prioritize low distortion. Pairing the device with a suitable TAS50xx digital audio processor enables direct digital command and system-level control.

A critical layout consideration is the power stage's high-current switching output. The HTSSOP exposed thermal pad must be connected to a properly designed copper area and thermal path, while output-filter and speaker traces must be kept away from sensitive control and clock routes. Supply capacitors must be placed close to the power pins, and the manufacturer reference layout should be followed to control switching noise, voltage drops, and thermal performance.

This page combines the manufacturer's core power and distortion ratings with package information, application guidance, design notes, and a conservative assessment of drop-in replacement options. It is intended to help engineers plan the power budget, thermal strategy, PCB footprint, digital audio interface, and speaker load before releasing a TAS5110DAPR-based design for production.

Alternatif penggantian untuk TAS5110DAPR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

TAS5110DAPR Rating Maksimal & Karakteristik Listrik

Product Type 2-channel stereo Class D true digital audio amplifier power stage
Maximum Output Power 50 W per channel into 6 ohm at 10% THD
Low-Distortion Output Power 40 W per channel into 6 ohm at 0.1% THD
Total Harmonic Distortion plus Noise <0.09% typical at 1 kHz input signal
Dynamic Range 93 dB in TDAA system
Channel Count 2 channels
Amplifier Topology Class D switching power stage
Digital Audio Technology TI Equibit true digital audio amplification
Nominal Speaker Load 6 ohm per channel
Digital Inputs Multiple digital inputs
Mute Control Integrated
Shutdown Control Integrated
Short-Circuit Protection Integrated
Thermal Protection Integrated
Paket 32-pin HTSSOP
Tipe Mounting Surface mount

TAS5110DAPR 32-pin htssop Diamant Konfigurasi Panduan

Konfigurasi pin untuk TAS5110DAPR (32-pin htssop pakai pakai). Alat kuasa ini memiliki terminal gate, drain, dan sumber. Untuk pakai pakai yang tak polar, lihat datasheet produsen untuk orientasi dan detil footprint pin 1 yang pasti. Aplikasi umum termasuk desain penolong daya, menggerakkan motor, dan mengalihkan muatan.

Diamant diagram pakai pakai 32-pin htssop untuk TAS5110DAPR

Tidak ada data diatribut pin yang tersedia untuk TAS5110DAPR.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

TAS5110DAPR cocok untuk 6 aplikasis: Powered Stereo Speaker, Home Theater Stereo Amplifier, Multimedia Speaker System, Soundbar Amplification, Professional Audio Monitor Amplifier, Digital Audio Power Module.

🎧

Powered Stereo Speaker

The TAS5110DAPR fits a powered stereo speaker that needs two 6 ohm speaker outputs and accepts digital audio commands from a host processor. Its 50 W per-channel capability at 10% THD supports high-volume playback, while the 40 W per-channel rating at 0.1% THD provides a lower-distortion design target. The two-channel power stage reduces the number of output ICs and associated output-filter networks. Designers must size the supply for peak Class D current, provide the manufacturer-recommended LC filtering, and place the exposed thermal pad on an effective copper heat-spreading area.

📺

Home Theater Stereo Amplifier

TAS5110DAPR can provide the left and right power channels of a home-theater stereo amplifier while leaving decoding and system control to a digital audio processor. The 50 W per-channel rating into 6 ohms is suitable for demanding compact speakers, and the 40 W per-channel specification at 0.1% THD supports a cleaner operating point for sustained music. Digital command inputs also support coordinated mute and shutdown across the amplifier. Board layout must minimize switching-node coupling into the digital control section and preserve thermal performance through the HTSSOP exposed pad.

🖥️

Multimedia Speaker System

The TAS5110DAPR is appropriate for desktop, active-speaker, and multimedia systems where compactness and efficiency are important. Two integrated Class D output channels reduce component count compared with separate single-channel stages, while the digital interface allows a host controller to manage gain-related commands, mute, and shutdown. The amplifier can operate at the 40 W per-channel, 0.1% THD point when lower distortion is desired. Its switching architecture still requires careful output-filter design, short output routing, stable supply bypassing, and adequate copper area beneath the exposed thermal pad.

🎵

Soundbar Amplification

TAS5110DAPR can supply stereo amplification in a soundbar or compact active-speaker enclosure. Its 50 W per-channel capability gives designers headroom for higher-efficiency speakers, while selecting the 40 W per-channel condition can reduce thermal stress when low distortion is a primary requirement. The true digital architecture shortens the path between the audio processor and power stage and supports system-level mute or shutdown. Mechanical design should provide air flow or a controlled thermal path, and PCB routing should keep output switching energy away from clock and control traces.

🎙️

Professional Audio Monitor Amplifier

The TAS5110DAPR can support a compact professional monitor amplifier where two channels and a surface-mount power stage are required. The manufacturer specifies 40 W per channel at 0.1% THD into 6 ohms, which is a more useful baseline for low-distortion monitoring than the 50 W headline rating. Typical THD+N below 0.09% at 1 kHz supports clean signal reproduction when combined with appropriate digital processing and output filtering. Engineers should validate thermal rise, speaker excursion, and system latency before using the stage in a latency-sensitive monitoring path.

🔧

Digital Audio Power Module

TAS5110DAPR works as the output module in a modular true digital audio amplifier that separates control and signal processing from high-current power conversion. The multiple digital inputs, mute function, shutdown control, short-circuit protection, and thermal protection support integration into a managed amplifier platform. A compatible digital processor can issue coordinated commands to both channels, while the Class D output stage provides the required power density for 6 ohm loads. Product developers should preserve the digital clock and control layout from the reference design and provide independent validation for every supported speaker impedance.

What is the Texas Instruments TAS5110DAPR?
The Texas Instruments TAS5110DAPR is a 2-channel, true digital audio Class D power amplifier that delivers 50 W per channel into a 6 ohm load at 10% THD. According to the manufacturer datasheet, it uses TI Equibit technology, includes multiple digital inputs, and operates with a compatible TAS50xx digital audio processor. The device is packaged in a 32-pin HTSSOP for surface-mount amplifier designs.
How much power can TAS5110DAPR deliver?
TAS5110DAPR can deliver 50 W per channel into a 6 ohm load at 10% THD and 40 W per channel into the same load at 0.1% THD. According to the manufacturer datasheet, these ratings distinguish headline maximum output from a lower-distortion operating condition. Designers should use the 40 W condition when channel-to-channel distortion and audio quality are more important than maximum short-duration power capability.
What is the distortion and dynamic range of TAS5110DAPR?
The TAS5110DAPR has typical THD+N below 0.09% using a 1 kHz input signal, and its TDAA system dynamic range is 93 dB. According to the manufacturer datasheet, these figures characterize the complete digital audio system behavior and support clean reproduction of high-level music passages. Actual channel performance also depends on the digital processor, supply configuration, output filtering, PCB layout, speaker impedance, and thermal conditions.
Does TAS5110DAPR require a digital audio processor?
Yes, TAS5110DAPR is a true digital audio power stage and is intended to operate with a compatible digital audio PWM processor such as a member of the TAS50xx family. According to the manufacturer datasheet, the processor supplies the digital command signals consumed by the power stage. This division of responsibility keeps signal processing outside the output IC and allows coordinated channel control and system-level mute or shutdown behavior.
What package does TAS5110DAPR use?
TAS5110DAPR is supplied in a 32-pin HTSSOP package for surface-mount assembly. The manufacturer datasheet provides the authoritative land pattern, exposed-pad connection, pin numbering, and thermal-layout requirements. Because the package is a 32-pin HTSSOP rather than a standard 32-pin TSSOP outline, engineers should use the TI package drawing instead of selecting a generic package solely from its pin count.
Where can I download the TAS5110DAPR datasheet PDF?
The TAS5110DAPR datasheet PDF is available through the Texas Instruments product documentation for the TAS5110 device. According to the manufacturer documentation, the document contains the electrical characteristics, digital interface timing, pin descriptions, typical application circuit, output-filter guidance, and recommended PCB layout. Use the TI document to verify supply limits, control thresholds, clock requirements, and thermal conditions before committing a board design.
Where can I find the TAS5110DAPR pinout?
The TAS5110DAPR pinout is shown in the pin-configuration section of the manufacturer datasheet and the associated HTSSOP package drawing. According to TI documentation, engineers should assign power, ground, digital command, mute, shutdown, and output connections by the documented pin numbers rather than by package position alone. The exposed thermal pad is a dedicated thermal connection and should not be treated as an interchangeable logic pin.
What is the best drop-in replacement for TAS5110DAPR?
No alternate part should be treated as a confirmed drop-in replacement for TAS5110DAPR without a manufacturer pin-for-pin cross-reference. The available family references do not establish a different MPN with the same HTSSOP-32 footprint and matching digital interface. A valid replacement must preserve pinout, supply rails, clocking, control thresholds, PWM behavior, output stage characteristics, and thermal-pad requirements while meeting the original 50 W per-channel target.
Is TAS5110DAPR the same as TAS5110DAP?
TAS5110DAPR and TAS5110DAP are not automatically interchangeable merely because they share the TAS5110 family name. The available catalog data identifies both as 32-pin HTSSOP Class D devices, but it does not establish that the final ordering codes have identical pinout, firmware interfaces, qualification, or production status. Confirm every electrical and control parameter against the ordering-information table before using one in place of the other.
What can replace TAS5110DAPR in an amplifier design?
The safest replacement for TAS5110DAPR is a manufacturer-designated equivalent with the same HTSSOP-32 land pattern and an explicitly matching digital power-stage interface. According to the manufacturer cross-reference guidance, parametric similarity alone does not guarantee drop-in behavior. Engineers should check the complete pin description, clock protocol, control logic, power rails, output stage, protection behavior, and thermal data before authorizing a substitution.
TAS5110DAPR versus TAS5110DAD: which is the better drop-in candidate?
TAS5110DAPR is the better candidate for a TAS5110DAPR replacement because it preserves the requested ordering code and 32-pin HTSSOP format, while TAS5110DAD is a distinct ordering option with a different package suffix. However, matching the target MPN does not by itself establish interchangeability for every design. Compare the ordering table, pin configuration, temperature grade, and application-specific qualification for both devices.
When should I choose TAS5110DAPR for a powered speaker?
Choose TAS5110DAPR for a powered-speaker design that requires two high-power channels, digital audio control, and up to 50 W per channel into 6 ohms. According to the manufacturer ratings, the device can also sustain 40 W per channel at 0.1% THD, making it appropriate when lower distortion is more important than maximum headline power. The final design must also account for amplifier efficiency, supply capacity, speaker excursion, and enclosure cooling.
Is TAS5110DAPR suitable for home theater and multimedia amplifiers?
Yes, TAS5110DAPR is suitable for home-theater, multimedia, soundbar, and compact stereo amplifier modules that use a true digital audio architecture. According to the manufacturer datasheet, its 2-channel 50 W per-channel Class D output stage is intended for low-impedance speakers and works with a compatible TAS50xx processor. Use the lower 40 W per-channel rating at 0.1% THD as the cleaner-design operating target.
Where to buy TAS5110DAPR online?
Use the Request a Quote form on this page to request TAS5110DAPR availability, current lead time, and a quotation tailored to the required quantity. The form is the appropriate purchasing route for this quote-oriented product page and avoids presenting a stale transactional price. Specify the required reel quantity, target delivery date, and whether you need traceability or manufacturer-authorized sourcing.
What is the price of TAS5110DAPR?
Request the current TAS5110DAPR quotation through the Request a Quote form on this page, including quantity, packaging preference, target date, and shipping destination. Price and availability can vary with order volume, lifecycle status, and market conditions, so a current quote provides the most accurate commercial answer. The form also lets you request production quantities and any required component traceability.
What is the lead time and stock status for TAS5110DAPR?
The current lead time and stock status for TAS5110DAPR should be obtained through the Request a Quote form on this page. Provide the required order quantity, reel packaging needs, shipment destination, and required delivery date so the quotation can reflect the actual supply position. For production planning, build schedules should include enough time for incoming inspection and any board-level rework if the shipment does not arrive on schedule.
What are the key specifications of TAS5110DAPR that engineers should know?
The key TAS5110DAPR specifications are 2-channel Class D operation, 50 W per channel into 6 ohms at 10% THD, 40 W per channel at 0.1% THD, typical THD+N below 0.09% at 1 kHz, and 93 dB system dynamic range. According to the manufacturer datasheet, the part also provides multiple digital inputs, mute, shutdown, short-circuit protection, and thermal protection in a 32-pin HTSSOP package.

Data referensi engineering untuk TAS5110DAPR — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose TAS5110DAPR for a compact, high-power stereo design that uses a compatible TI digital audio processor and drives 6 ohm speakers. Its strongest attributes are 50 W per channel at 10% THD, 40 W per channel at 0.1% THD, typical THD+N below 0.09% at 1 kHz, and a 32-pin HTSSOP package. Select a different ordering code only after verifying its exact pinout, digital interface, qualification, thermal requirements, and production status. No cross-brand or alternate-manufacturer drop-in part is recommended because an equivalent HTSSOP footprint and compatible true-digital interface have not been established. For designs below 40 W per channel, a lower-power digital power stage may simplify thermal design. For designs requiring a conventional analog input rather than digital commands, an analog-input Class D amplifier may integrate more simply. In every case, validate the output filter, speaker impedance, supply transient response, and thermal rise at the intended sustained power level.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini
Package 32-pin HTSSOP
Brand Texas Instruments
Channel Count 2 channels
Maximum Output Power 50 W per channel into 6 ohm at 10% THD
Low-Distortion Output Power 40 W per channel into 6 ohm at 0.1% THD
THD+N <0.09% typical at 1 kHz input signal
Dynamic Range 93 dB in TDAA system
Amplifier Class Class D
Digital Audio Technology TI Equibit true digital audio amplification
Protection Features Short-circuit protection and thermal protection

Diferensiator Kunci

  • High per-channel output in a compact stereo power-stage package (vsTAS5110DAD)
  • True digital control supports coordinated amplifier behavior (vsTAS5110DAP)
  • Low-distortion power specification is stated at 0.1% THD (vsTAS5110DAD)

Catatan Desain

Treat the HTSSOP exposed pad as the primary thermal path for the Class D output stage. Provide continuous copper beneath the device and connect it to the package thermal pad according to the manufacturer land pattern. Account for heat from both channels when sizing the copper area and enclosure heat path. Validate the hottest operating condition with the intended 6 ohm load and maximum sustained output rather than relying only on the 50 W headline rating.

Use the manufacturer reference layout for the power, ground, digital command, and output-filter connections. Place local supply capacitors immediately at the relevant power pins and keep the Class D output loop as compact as possible. Route the switching outputs away from clock and control traces, use a continuous ground reference, and preserve the exposed-pad connection. These practices reduce supply transients, switching-node radiation, and data-command corruption.

Size the supply and energy-storage network for peak Class D current rather than average output power alone. The 50 W per-channel rating describes the audio output stage, while the upstream supply must support switching losses and transient demand from both channels. Place bulk capacitance close to the power stage, verify startup current, and confirm that the protection system remains compatible with the intended speaker load. Use the 40 W per-channel, 0.1% THD operating point as the baseline for conservative thermal design.

Do not infer drop-in compatibility from the TAS5110 family name or a matching pin count. The digital clock interface, control thresholds, supply requirements, output characteristics, qualification, and exposed-pad layout must all be checked before substituting a different ordering code. Also avoid treating the maximum 50 W rating as a continuous full-power requirement in every thermal calculation; speaker impedance, signal content, enclosure cooling, and the selected distortion target materially affect real power dissipation.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The manufacturer documentation confirms an integrated short-circuit protection feature and thermal protection feature, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. AEC-Q100 is not applicable to this commercial audio power-stage ordering code unless the manufacturer explicitly designates a qualified automotive variant.

Data disahkan pada: 2026-11-15 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

TAS5110DAPR datasheet TAS5110DAPR pinout TAS5110DAPR datasheet pdf TAS5110DAPR 32 HTSSOP TAS5110DAPR 50W amplifier TAS5110DAPR equivalent TAS5110DAPR replacement TAS5110DAPR drop-in replacement TAS5110DAPR vs TAS5110DAD Texas Instruments TAS5110DAPR TAS5110DAPR price TAS5110DAPR stock

Komponen dan Istilah Terkait

Texas Instruments TAS5110DAPR TAS5110DAP TAS5110DAD TAS5086DBTR TAS5028PAGR Class D amplifier digital audio amplifier true digital audio amplifier TDAA system Equibit technology PWM power stage audio power amplifier stereo amplifier HTSSOP-32 surface-mount package digital audio processor Class D power stage linear regulator power management IC THD THD+N dynamic range short-circuit protection thermal protection
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ