TAS5110DAPR - 50W Stereo Class D Amplifier | Texas Instruments
부품 번호: TAS5110DAPR ✓ 활성TAS5110DAPR 개요
A Class D audio amplifier is a switching power amplifier that uses pulse-width modulation to represent an audio waveform. Unlike a conventional linear amplifier, its output transistors operate mainly in the saturated and unsaturated states, reducing dissipation and improving power efficiency. The TAS5110 belongs to the digital power-stage hierarchy and requires a compatible digital audio PWM processor to supply its command inputs. It is therefore positioned as the output stage of a true digital audio system rather than as a conventional analog-input amplifier.
The principal performance figures cover continuous power, distortion, and signal-to-noise behavior. Output power reaches 50 W per channel into 6 ohms at 10% THD, while the lower-distortion figure is 40 W per channel at 0.1% THD. Typical THD+N is less than 0.09% with a 1 kHz input signal, and system dynamic range is 93 dB. The stereo architecture supports two independent audio channels in one package, reducing the number of power-stage ICs needed in a multichannel amplifier architecture.
The device uses TI's Equibit technology as part of a true digital audio signal path. Digital command signals drive the internal PWM power stage, reducing sensitivity to analog input-stage distortion and supporting coordinated power management across multiple channels. Integrated short-circuit and thermal protection, mute control, shutdown control, and multiple digital inputs provide the basic controls needed for a robust amplifier module. Exact clock, control-voltage, and timing details should be taken from the manufacturer pin-description and timing tables before PCB implementation.
Typical applications include powered speakers, home-theater and multimedia amplification, professional audio equipment, soundbars, and compact stereo systems requiring high output power from a surface-mount package. The 50 W per-channel capability is most useful with low-impedance speakers, while the 40 W rating at 0.1% THD provides a more conservative operating point for designs that prioritize low distortion. Pairing the device with a suitable TAS50xx digital audio processor enables direct digital command and system-level control.
A critical layout consideration is the power stage's high-current switching output. The HTSSOP exposed thermal pad must be connected to a properly designed copper area and thermal path, while output-filter and speaker traces must be kept away from sensitive control and clock routes. Supply capacitors must be placed close to the power pins, and the manufacturer reference layout should be followed to control switching noise, voltage drops, and thermal performance.
This page combines the manufacturer's core power and distortion ratings with package information, application guidance, design notes, and a conservative assessment of drop-in replacement options. It is intended to help engineers plan the power budget, thermal strategy, PCB footprint, digital audio interface, and speaker load before releasing a TAS5110DAPR-based design for production.
드롭인 대체품: TAS5110DAPR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청TAS5110DAPR 최대 정격 & 전기적 특성
| Product Type | 2-channel stereo Class D true digital audio amplifier power stage |
| Maximum Output Power | 50 W per channel into 6 ohm at 10% THD |
| Low-Distortion Output Power | 40 W per channel into 6 ohm at 0.1% THD |
| Total Harmonic Distortion plus Noise | <0.09% typical at 1 kHz input signal |
| Dynamic Range | 93 dB in TDAA system |
| Channel Count | 2 channels |
| Amplifier Topology | Class D switching power stage |
| Digital Audio Technology | TI Equibit true digital audio amplification |
| Nominal Speaker Load | 6 ohm per channel |
| Digital Inputs | Multiple digital inputs |
| Mute Control | Integrated |
| Shutdown Control | Integrated |
| Short-Circuit Protection | Integrated |
| Thermal Protection | Integrated |
| 패키지 | 32-pin HTSSOP |
| 실장 유형 | Surface mount |
TAS5110DAPR 32-pin htssop 핀 구성 가이드
TAS5110DAPR(32-pin htssop 패키지)의 핀 구성입니다. 이 전력 소자는 게이트, 드레인, 소스 단자를 갖추고 있습니다. 비편향 패키지의 경우 정확한 핀 1 방향과 풋프린트 세부 정보는 제조사 데이터시트를 참조하십시오. 일반적인 응용 분야로는 전원 공급 장치 설계, 모터 구동, 부하 스위칭이 있습니다.
다음에 대한 상세 핀아웃 데이터 없음: TAS5110DAPR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
TAS5110DAPR 적합 용도: 6 애플리케이션s: Powered Stereo Speaker, Home Theater Stereo Amplifier, Multimedia Speaker System, Soundbar Amplification, Professional Audio Monitor Amplifier, Digital Audio Power Module.
Powered Stereo Speaker
The TAS5110DAPR fits a powered stereo speaker that needs two 6 ohm speaker outputs and accepts digital audio commands from a host processor. Its 50 W per-channel capability at 10% THD supports high-volume playback, while the 40 W per-channel rating at 0.1% THD provides a lower-distortion design target. The two-channel power stage reduces the number of output ICs and associated output-filter networks. Designers must size the supply for peak Class D current, provide the manufacturer-recommended LC filtering, and place the exposed thermal pad on an effective copper heat-spreading area.
추천
Home Theater Stereo Amplifier
TAS5110DAPR can provide the left and right power channels of a home-theater stereo amplifier while leaving decoding and system control to a digital audio processor. The 50 W per-channel rating into 6 ohms is suitable for demanding compact speakers, and the 40 W per-channel specification at 0.1% THD supports a cleaner operating point for sustained music. Digital command inputs also support coordinated mute and shutdown across the amplifier. Board layout must minimize switching-node coupling into the digital control section and preserve thermal performance through the HTSSOP exposed pad.
추천
Multimedia Speaker System
The TAS5110DAPR is appropriate for desktop, active-speaker, and multimedia systems where compactness and efficiency are important. Two integrated Class D output channels reduce component count compared with separate single-channel stages, while the digital interface allows a host controller to manage gain-related commands, mute, and shutdown. The amplifier can operate at the 40 W per-channel, 0.1% THD point when lower distortion is desired. Its switching architecture still requires careful output-filter design, short output routing, stable supply bypassing, and adequate copper area beneath the exposed thermal pad.
추천
Soundbar Amplification
TAS5110DAPR can supply stereo amplification in a soundbar or compact active-speaker enclosure. Its 50 W per-channel capability gives designers headroom for higher-efficiency speakers, while selecting the 40 W per-channel condition can reduce thermal stress when low distortion is a primary requirement. The true digital architecture shortens the path between the audio processor and power stage and supports system-level mute or shutdown. Mechanical design should provide air flow or a controlled thermal path, and PCB routing should keep output switching energy away from clock and control traces.
추천
Professional Audio Monitor Amplifier
The TAS5110DAPR can support a compact professional monitor amplifier where two channels and a surface-mount power stage are required. The manufacturer specifies 40 W per channel at 0.1% THD into 6 ohms, which is a more useful baseline for low-distortion monitoring than the 50 W headline rating. Typical THD+N below 0.09% at 1 kHz supports clean signal reproduction when combined with appropriate digital processing and output filtering. Engineers should validate thermal rise, speaker excursion, and system latency before using the stage in a latency-sensitive monitoring path.
추천
Digital Audio Power Module
TAS5110DAPR works as the output module in a modular true digital audio amplifier that separates control and signal processing from high-current power conversion. The multiple digital inputs, mute function, shutdown control, short-circuit protection, and thermal protection support integration into a managed amplifier platform. A compatible digital processor can issue coordinated commands to both channels, while the Class D output stage provides the required power density for 6 ohm loads. Product developers should preserve the digital clock and control layout from the reference design and provide independent validation for every supported speaker impedance.
추천
추천 제품 요약
엔지니어링 참조 데이터: TAS5110DAPR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 32-pin HTSSOP |
| Brand | Texas Instruments |
| Channel Count | 2 channels |
| Maximum Output Power | 50 W per channel into 6 ohm at 10% THD |
| Low-Distortion Output Power | 40 W per channel into 6 ohm at 0.1% THD |
| THD+N | <0.09% typical at 1 kHz input signal |
| Dynamic Range | 93 dB in TDAA system |
| Amplifier Class | Class D |
| Digital Audio Technology | TI Equibit true digital audio amplification |
| Protection Features | Short-circuit protection and thermal protection |
주요 차별점
- High per-channel output in a compact stereo power-stage package (vs TAS5110DAD)
- True digital control supports coordinated amplifier behavior (vs TAS5110DAP)
- Low-distortion power specification is stated at 0.1% THD (vs TAS5110DAD)
설계 노트
Treat the HTSSOP exposed pad as the primary thermal path for the Class D output stage. Provide continuous copper beneath the device and connect it to the package thermal pad according to the manufacturer land pattern. Account for heat from both channels when sizing the copper area and enclosure heat path. Validate the hottest operating condition with the intended 6 ohm load and maximum sustained output rather than relying only on the 50 W headline rating.
Use the manufacturer reference layout for the power, ground, digital command, and output-filter connections. Place local supply capacitors immediately at the relevant power pins and keep the Class D output loop as compact as possible. Route the switching outputs away from clock and control traces, use a continuous ground reference, and preserve the exposed-pad connection. These practices reduce supply transients, switching-node radiation, and data-command corruption.
Size the supply and energy-storage network for peak Class D current rather than average output power alone. The 50 W per-channel rating describes the audio output stage, while the upstream supply must support switching losses and transient demand from both channels. Place bulk capacitance close to the power stage, verify startup current, and confirm that the protection system remains compatible with the intended speaker load. Use the 40 W per-channel, 0.1% THD operating point as the baseline for conservative thermal design.
Do not infer drop-in compatibility from the TAS5110 family name or a matching pin count. The digital clock interface, control thresholds, supply requirements, output characteristics, qualification, and exposed-pad layout must all be checked before substituting a different ordering code. Also avoid treating the maximum 50 W rating as a continuous full-power requirement in every thermal calculation; speaker impedance, signal content, enclosure cooling, and the selected distortion target materially affect real power dissipation.
규정 준수 정보
The manufacturer documentation confirms an integrated short-circuit protection feature and thermal protection feature, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. AEC-Q100 is not applicable to this commercial audio power-stage ordering code unless the manufacturer explicitly designates a qualified automotive variant.