TJA1041AT/H/V - 1Mbps 5V CAN Transceiver | NXP
MPN: TJA1041AT/H/V ✗ Akhir HidupTJA1041AT/H/V Ringkasan
A CAN transceiver is the physical-layer interface within a Controller Area Network node. The TJA1041A belongs to the hierarchy of CAN interface ICs, network controllers, interface transceivers and automotive communication semiconductors. Its differential bus interface supports robust communication over wired CAN networks, while its digital TXD and RXD connections simplify integration with a host microcontroller or dedicated CAN controller.
The TJA1041AT/H/V is identified as an AEC-Q100 automotive-grade device. Its principal operating parameters include a maximum CAN data rate of 1 Mbit/s, a nominal 5 V supply and a 14-pin SO package. The family includes standby and sleep operating modes for applications where low quiescent consumption or controlled wake-up behavior is important. According to the NXP product information, the TJA1041AT is at End of Life, so engineers should confirm availability and lifecycle requirements before starting a new design.
The device separates the CAN controller from the physical bus. TXD accepts the controller's transmit command, while RXD presents the received bus state to the controller. CANH and CANL form the differential pair connected to the bus. This architecture supports point-to-point communication rates of 500 kbit/s for classic CAN and 1 Mbit/s for high-speed CAN networks, subject to the complete system configuration and bus implementation.
Typical applications include automotive body-control modules, powertrain controllers, instrument clusters, vehicle comfort systems, industrial CAN gateways, diagnostic equipment and embedded motor-control systems. In an automotive installation, the TJA1041AT/H/V can connect a CAN controller to a terminated differential network while standby and sleep modes help reduce activity during inactive operating periods.
PCB implementation must preserve the CAN bus geometry, provide a low-impedance return path, and place transceiver and bus-termination components close to their associated controller or connector. A common split termination arrangement is useful when the transceiver sits at a remote board boundary. The 14-pin SO package should be inspected against the current NXP datasheet before assigning signals because board layouts must follow the manufacturer's exact pin descriptions.
This product page combines the verified 1 Mbit/s, 5 V, 14-pin SO and AEC-Q100 attributes with lifecycle information, application guidance, comparison criteria and PCB-focused design notes. It is intended to help engineers identify whether this End-of-Life transceiver matches the electrical and mechanical requirements of an existing automotive or industrial CAN design.
Alternatif penggantian untuk TJA1041AT/H/V — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Tidak ada alternatif pengganti yang tersedia untuk produk ini.
Permintaan AlternatifTJA1041AT/H/V Spesifikasi
| Product Type | High-speed CAN transceiver |
| Maximum CAN Data Rate | 1 Mbit/s |
| Nominal Supply Voltage | 5 V |
| Number of Receivers | 1 |
| Number of Transmitters | 1 |
| Bus Interface | Differential CANH/CANL |
| Low-Power Modes | Standby and sleep |
| Automotive Qualification | AEC-Q100 |
| Paket | 14-pin SO |
| Tipe Mounting | Surface mount |
TJA1041AT/H/V 14-pin so Diamant Konfigurasi Panduan
Konfigurasi pin untuk TJA1041AT/H/V (14-pin so pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk TJA1041AT/H/V.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
TJA1041AT/H/V cocok untuk 6 aplikasis: Automotive Body Control Module, Vehicle Comfort and Convenience Network, Industrial CAN Gateway, Powertrain and Chassis Controller, Automotive Diagnostics Interface, Mobile Equipment CAN Network.
Automotive Body Control Module
The TJA1041AT/H/V fits an automotive body-control module that must exchange CAN messages between door, lighting, climate and seat controllers. Its differential CAN interface supports communication at up to 1 Mbit/s, while the nominal 5 V supply is consistent with established 5 V vehicle electronics. The standby and sleep functions help the module limit bus-interface activity during inactive periods. Integration requires the exact 14-pin SO pin assignment, correct CAN termination and qualification evidence appropriate to the vehicle program.
Direkomendasikan
Vehicle Comfort and Convenience Network
The TJA1041AT/H/V can connect a comfort controller to a distributed CAN network containing window, mirror, climate and seat modules. Its 1 Mbit/s capability provides sufficient bandwidth for short control frames, while differential signaling supports operation across the vehicle wiring harness. Standby and sleep behavior can reduce current demand when the subsystem is inactive. Designers should still validate common-mode range, bus fault recovery, ESD requirements and power-sequencing behavior against the complete vehicle electrical architecture.
Direkomendasikan
Industrial CAN Gateway
The TJA1041AT/H/V is suitable for a legacy industrial CAN gateway that bridges a 5 V embedded controller to a fieldbus network. Its high-speed CAN operation reaches 1 Mbit/s and its differential interface is appropriate for a properly terminated copper bus. The AEC-Q100 qualification is beneficial where the gateway is installed in a harsh vehicle or mobile-equipment environment. The design must include local bus protection, a continuous ground reference, controlled termination and verification of idle-bus behavior during sleep or standby transitions.
Direkomendasikan
Powertrain and Chassis Controller
The TJA1041AT/H/V can serve as the CAN physical-layer element in a powertrain or chassis controller when the existing platform uses this established 14-pin SO device. A 1 Mbit/s bus supports control and diagnostic traffic, and standby and sleep modes assist power management. Automotive deployment requires review of transient immunity, bus-fault handling, thermal performance and all qualification documentation applicable to the vehicle program. The device's AEC-Q100 designation supports automotive use, but system qualification remains a separate requirement.
Direkomendasikan
Automotive Diagnostics Interface
The TJA1041AT/H/V is applicable to a diagnostics or service interface that connects a controller to a high-speed CAN diagnostic network. The transceiver supports 1 Mbit/s operation and provides separate differential bus and digital-controller paths, allowing the diagnostic controller to transmit requests and receive responses. Sleep and standby operation can reduce activity when the interface is not required. The implementation should preserve the manufacturer's CANH and CANL routing, include correct termination at the physical network boundary and verify wake-up behavior with the connected controller.
Direkomendasikan
Mobile Equipment CAN Network
The TJA1041AT/H/V can support a mobile-equipment CAN network containing distributed motors, sensors and operator controls. Its 1 Mbit/s differential interface accommodates the data rate of a high-speed CAN segment, while standby and sleep modes help manage inactive periods. AEC-Q100 qualification is relevant when the equipment experiences automotive-like environmental stress. Verify the exact supply limits, bus-fault features, thermal range and external protection network in the NXP datasheet, and avoid changing the 14-pin SO layout without a complete PCB migration.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk TJA1041AT/H/V — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Catatan Desain
Route CANH and CANL as a tightly coupled differential pair and provide a continuous ground reference beneath the pair. Keep the transceiver close to the connector or bus-entry point, with protection and termination placed in the physical order recommended by the NXP application guidance. Avoid switching nodes, test pads and unrelated high-current paths between the two bus conductors.
Use the 14-pin SO footprint and the exact manufacturer pin table when assigning signals and orienting the package. Do not infer an unused or alternate control function from a generic CAN-transceiver schematic. Review standby and sleep-mode transitions against the connected controller so that TXD and bus state cannot leave the node in an indeterminate condition.
A CAN transceiver being rated for 1 Mbit/s does not guarantee that the assembled network will operate reliably at that rate. Check controller timing, cable type, topology, termination resistance, propagation delay and total bus length. Also avoid treating an AEC-Q100 device designation as a complete vehicle-level EMC, transient or functional-safety approval.
Informasi Konformitas
The automotive AEC-Q100 qualification is identified in the verified product information. RoHS, REACH, lead-free, halogen-free and conflict-minerals statuses require confirmation from the applicable NXP documentation.