LAST TIME BUY NOTICE: TJA1041AT/H/V is approaching end-of-life. Last order date: Contact us. View available alternative parts →
NXP Semiconductors

TJA1041AT/H/V - 1Mbps 5V CAN Transceiver | NXP

MPN: TJA1041AT/H/V ✗ End of Life
5 V Vdss 14-pin SO Package
MOQ: 1 |

TJA1041AT/H/V Overview

The NXP Semiconductors TJA1041AT/H/V is an automotive high-speed CAN transceiver supporting data rates up to 1 Mbit/s, operating from a 5 V supply and housed in a 14-pin SO package. It provides differential transmit and receive paths between a CAN protocol controller and the physical CAN bus, while standby and sleep functions support low-power automotive networking designs.

A CAN transceiver is the physical-layer interface within a Controller Area Network node. The TJA1041A belongs to the hierarchy of CAN interface ICs, network controllers, interface transceivers and automotive communication semiconductors. Its differential bus interface supports robust communication over wired CAN networks, while its digital TXD and RXD connections simplify integration with a host microcontroller or dedicated CAN controller.

The TJA1041AT/H/V is identified as an AEC-Q100 automotive-grade device. Its principal operating parameters include a maximum CAN data rate of 1 Mbit/s, a nominal 5 V supply and a 14-pin SO package. The family includes standby and sleep operating modes for applications where low quiescent consumption or controlled wake-up behavior is important. According to the NXP product information, the TJA1041AT is at End of Life, so engineers should confirm availability and lifecycle requirements before starting a new design.

The device separates the CAN controller from the physical bus. TXD accepts the controller's transmit command, while RXD presents the received bus state to the controller. CANH and CANL form the differential pair connected to the bus. This architecture supports point-to-point communication rates of 500 kbit/s for classic CAN and 1 Mbit/s for high-speed CAN networks, subject to the complete system configuration and bus implementation.

Typical applications include automotive body-control modules, powertrain controllers, instrument clusters, vehicle comfort systems, industrial CAN gateways, diagnostic equipment and embedded motor-control systems. In an automotive installation, the TJA1041AT/H/V can connect a CAN controller to a terminated differential network while standby and sleep modes help reduce activity during inactive operating periods.

PCB implementation must preserve the CAN bus geometry, provide a low-impedance return path, and place transceiver and bus-termination components close to their associated controller or connector. A common split termination arrangement is useful when the transceiver sits at a remote board boundary. The 14-pin SO package should be inspected against the current NXP datasheet before assigning signals because board layouts must follow the manufacturer's exact pin descriptions.

This product page combines the verified 1 Mbit/s, 5 V, 14-pin SO and AEC-Q100 attributes with lifecycle information, application guidance, comparison criteria and PCB-focused design notes. It is intended to help engineers identify whether this End-of-Life transceiver matches the electrical and mechanical requirements of an existing automotive or industrial CAN design.

Drop-in alternatives for TJA1041AT/H/V — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

TJA1041AT/H/V Specifications

Product Type High-speed CAN transceiver
Maximum CAN Data Rate 1 Mbit/s
Nominal Supply Voltage 5 V
Number of Receivers 1
Number of Transmitters 1
Bus Interface Differential CANH/CANL
Low-Power Modes Standby and sleep
Automotive Qualification AEC-Q100
Package 14-pin SO
Mounting Type Surface mount

TJA1041AT/H/V 14-pin so Pin Configuration Guide

Pin configuration for TJA1041AT/H/V (14-pin so package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

14-pin so package pinout diagram for TJA1041AT/H/V

No detailed pinout data available for TJA1041AT/H/V.

Refer to the datasheet for full pin configuration.

Typical Applications

TJA1041AT/H/V is suitable for 6 applications: Automotive Body Control Module, Vehicle Comfort and Convenience Network, Industrial CAN Gateway, Powertrain and Chassis Controller, Automotive Diagnostics Interface, Mobile Equipment CAN Network.

🚗

Automotive Body Control Module

The TJA1041AT/H/V fits an automotive body-control module that must exchange CAN messages between door, lighting, climate and seat controllers. Its differential CAN interface supports communication at up to 1 Mbit/s, while the nominal 5 V supply is consistent with established 5 V vehicle electronics. The standby and sleep functions help the module limit bus-interface activity during inactive periods. Integration requires the exact 14-pin SO pin assignment, correct CAN termination and qualification evidence appropriate to the vehicle program.

🚗

Vehicle Comfort and Convenience Network

The TJA1041AT/H/V can connect a comfort controller to a distributed CAN network containing window, mirror, climate and seat modules. Its 1 Mbit/s capability provides sufficient bandwidth for short control frames, while differential signaling supports operation across the vehicle wiring harness. Standby and sleep behavior can reduce current demand when the subsystem is inactive. Designers should still validate common-mode range, bus fault recovery, ESD requirements and power-sequencing behavior against the complete vehicle electrical architecture.

🏭

Industrial CAN Gateway

The TJA1041AT/H/V is suitable for a legacy industrial CAN gateway that bridges a 5 V embedded controller to a fieldbus network. Its high-speed CAN operation reaches 1 Mbit/s and its differential interface is appropriate for a properly terminated copper bus. The AEC-Q100 qualification is beneficial where the gateway is installed in a harsh vehicle or mobile-equipment environment. The design must include local bus protection, a continuous ground reference, controlled termination and verification of idle-bus behavior during sleep or standby transitions.

🚗

Powertrain and Chassis Controller

The TJA1041AT/H/V can serve as the CAN physical-layer element in a powertrain or chassis controller when the existing platform uses this established 14-pin SO device. A 1 Mbit/s bus supports control and diagnostic traffic, and standby and sleep modes assist power management. Automotive deployment requires review of transient immunity, bus-fault handling, thermal performance and all qualification documentation applicable to the vehicle program. The device's AEC-Q100 designation supports automotive use, but system qualification remains a separate requirement.

🖥️

Automotive Diagnostics Interface

The TJA1041AT/H/V is applicable to a diagnostics or service interface that connects a controller to a high-speed CAN diagnostic network. The transceiver supports 1 Mbit/s operation and provides separate differential bus and digital-controller paths, allowing the diagnostic controller to transmit requests and receive responses. Sleep and standby operation can reduce activity when the interface is not required. The implementation should preserve the manufacturer's CANH and CANL routing, include correct termination at the physical network boundary and verify wake-up behavior with the connected controller.

🔧

Mobile Equipment CAN Network

The TJA1041AT/H/V can support a mobile-equipment CAN network containing distributed motors, sensors and operator controls. Its 1 Mbit/s differential interface accommodates the data rate of a high-speed CAN segment, while standby and sleep modes help manage inactive periods. AEC-Q100 qualification is relevant when the equipment experiences automotive-like environmental stress. Verify the exact supply limits, bus-fault features, thermal range and external protection network in the NXP datasheet, and avoid changing the 14-pin SO layout without a complete PCB migration.

What is the TJA1041AT/H/V?
The TJA1041AT/H/V is an NXP Semiconductors high-speed CAN transceiver designed for automotive Controller Area Network nodes. According to the NXP TJA1041 datasheet, it supports data rates up to 1 Mbit/s, uses differential CAN transmit and receive paths, and operates from a nominal 5 V supply. The device also includes standby and sleep functions for power management in vehicle networking equipment.
What is the operating voltage of TJA1041AT/H/V?
The TJA1041AT/H/V operates from a nominal 5 V supply and is intended for automotive high-speed CAN systems. The exact minimum and maximum supply voltages, along with the corresponding device-performance limits, must be taken from the pin-specific tables in the NXP TJA1041 datasheet. Use those limits for schematic design, undervoltage behavior and power-supply tolerance.
Where can I download the TJA1041AT/H/V datasheet PDF?
The official NXP TJA1041 datasheet PDF is available at https://www.nxp.com/docs/en/data-sheet/TJA1041.pdf. It defines the CANH, CANL, TXD, RXD, supply, ground, standby and other connections for the TJA1041A family. Use the TJA1041A pin description and ordering information to confirm how the AT/H/V suffix and 14-pin SO package correspond to the assembled device.
Where can I find the TJA1041AT/H/V pinout?
The TJA1041AT/H/V pinout is shown in the NXP TJA1041 datasheet, using the 14-pin SO package drawing and pin-description table. The data-sheet diagrams identify CANH, CANL, TXD, RXD, power, ground and low-power-control connections. Before routing a PCB, assign every physical pin from that table and preserve the package orientation and exposed thermal requirements stated by NXP.
Is the TJA1041AT/H/V still active?
The TJA1041AT/H/V is marked End of Life on the NXP product-information page. It can therefore be relevant for maintenance of existing automotive and industrial CAN systems, but new production designs should obtain current lifecycle and sourcing confirmation before committing the part to a long-life platform. NXP also provides shipping-discontinuance and replacement-product information on its product page.
What CAN data rate does TJA1041AT/H/V support?
The TJA1041AT/H/V supports CAN communication at up to 1 Mbit/s, as stated in the NXP TJA1041 datasheet. This makes the device suitable for high-speed CAN nodes in automotive body, comfort and control systems. Actual bus rate also depends on controller timing, cable characteristics, termination, node count and the signal-integrity margin of the complete network.
What does standby and sleep mode do in the TJA1041AT/H/V?
Standby and sleep modes let the TJA1041AT/H/V reduce its activity when a CAN node does not require full communication. The NXP family documentation identifies both functions as low-power operating states, while the S control input coordinates the relevant behavior. Firmware must ensure the controller and wake-up strategy agree on bus state before the transceiver returns to normal operation.
Where can I buy TJA1041AT/H/V and check current price?
The current commercial status of the TJA1041AT/H/V can be reviewed through the Request a Quote form on this page. Because the NXP product page identifies the device as End of Life, buyers should request quantity availability, minimum order quantity, lead time, package condition and any traceable authorized supply before placing an order. Current commercial figures should not be inferred from historical market records.
What is the lead time for TJA1041AT/H/V?
The current lead time for TJA1041AT/H/V depends on remaining factory or channel supply and should be confirmed through the Request a Quote form on this page. The product is identified as End of Life, so lead time may vary materially with order quantity and traceability requirements. Provide your forecast quantity, target date and acceptable date-code requirements when requesting a quotation.
Is TJA1041AT/H/V in stock?
Current stock for TJA1041AT/H/V should be confirmed through the Request a Quote form on this page using the exact orderable MPN. The NXP product page reports End of Life, but lifecycle status alone does not identify available inventory at any particular channel or location. For production use, request lot traceability, package condition and a confirmed delivery schedule.
TJA1041AT/H/V vs TJA1042T/3/1J - which is better for a new automotive CAN design?
The TJA1041AT/H/V is the preferred match when maintaining an existing design that specifically uses its 14-pin SO CAN interface, 1 Mbit/s capability, standby and sleep functions, and 5 V nominal supply. The TJA1042T/3/1J may be relevant for a different generation of NXP CAN interface, but the manufacturer pin descriptions, low-power control behavior and qualification requirements must be compared before replacement. The TJA1041AT is marked End of Life.
What is the difference between TJA1041AT/H/V and TJA1042T/3/1J?
The TJA1041AT/H/V is an End-of-Life, 1 Mbit/s, 5 V CAN transceiver with standby and sleep modes in a 14-pin SO package. The TJA1042T/3/1J is a separate NXP CAN-transceiver variant whose precise electrical limits and pin behavior are defined by its own datasheet. Do not treat family similarity alone as proof of drop-in compatibility; compare pin names, supply thresholds, I/O levels and standby or sleep control.
When should I choose TJA1041AT/H/V over a newer CAN transceiver?
Choose the TJA1041AT/H/V primarily when maintaining an existing PCB whose schematic, layout and qualification evidence already depend on this exact interface. It supports up to 1 Mbit/s and includes standby and sleep operation in a 14-pin SO package, making it useful for legacy automotive or industrial CAN nodes. For a new platform, favor a transceiver whose lifecycle status, protection requirements and exact pin functions better match the design.
Is TJA1041AT/H/V suitable for an automotive CAN gateway?
The TJA1041AT/H/V is suitable for an automotive CAN gateway when the system uses a compatible 5 V CAN controller and requires a differential bus interface operating up to 1 Mbit/s. Its AEC-Q100 designation and standby and sleep functions support vehicle-network use. The gateway must still meet applicable environmental, EMC, fault-detection and functional-safety requirements beyond the device's stated qualification.
What is the best drop-in replacement for TJA1041AT/H/V?
The best replacement is the NXP part whose 14-pin SO pinout, 5 V power architecture, CAN bus characteristics, logic levels, low-power behavior and automotive qualification are verified against the TJA1041AT/H/V. TJA1042T/3/1J appears in comparative listings, but the available information does not establish unconditional pin-to-pin drop-in equivalence. Confirm the manufacturer pin table and electrical thresholds, then qualify the substitution in the target vehicle platform.
What can replace TJA1041AT/H/V?
A valid replacement for TJA1041AT/H/V must preserve the 14-pin SO footprint and provide compatible CANH, CANL, TXD, RXD, supply, ground and standby-control behavior while meeting the 1 Mbit/s application requirement. TJA1042T/3/1J is a comparison candidate, but its exact drop-in status requires verification against the NXP pin descriptions. Treat this as an engineering migration, not a blind substitution.
What key specifications should engineers know about the TJA1041AT/H/V?
The key TJA1041AT/H/V specifications are a 1 Mbit/s maximum CAN data rate, nominal 5 V operation, one differential transmit channel, one differential receive channel, standby and sleep modes, AEC-Q100 automotive qualification and a 14-pin SO package. The NXP product page also identifies the TJA1041AT as End of Life. Detailed voltage, current, temperature, protection and timing limits must be selected from the manufacturer datasheet.

Engineering reference data for TJA1041AT/H/V — comparison, design guidance, and compliance information.

Selection Guide

Choose the TJA1041AT/H/V when maintaining an existing 5 V automotive or industrial CAN design that already uses the 14-pin SO footprint and requires up to 1 Mbit/s operation. Its differential CAN interface, standby and sleep functions, and AEC-Q100 designation make it useful for vehicle-network and mobile-equipment platforms with an established design baseline. TJA1042T/3/1J is a relevant NXP comparison candidate, but it should be selected only after checking its exact pinout, supply thresholds, logic levels, low-power behavior and qualification requirements. For a new production platform, verify the remaining lifecycle supply before committing to an End-of-Life component; a newer transceiver may offer a longer availability window. If replacing an existing board, inspect the current schematic and layout rather than relying only on shared package dimensions. A true drop-in migration requires equivalent CANH, CANL, TXD, RXD, power, ground and standby-control behavior.

Design Notes

Route CANH and CANL as a tightly coupled differential pair and provide a continuous ground reference beneath the pair. Keep the transceiver close to the connector or bus-entry point, with protection and termination placed in the physical order recommended by the NXP application guidance. Avoid switching nodes, test pads and unrelated high-current paths between the two bus conductors.

Use the 14-pin SO footprint and the exact manufacturer pin table when assigning signals and orienting the package. Do not infer an unused or alternate control function from a generic CAN-transceiver schematic. Review standby and sleep-mode transitions against the connected controller so that TXD and bus state cannot leave the node in an indeterminate condition.

A CAN transceiver being rated for 1 Mbit/s does not guarantee that the assembled network will operate reliably at that rate. Check controller timing, cable type, topology, termination resistance, propagation delay and total bus length. Also avoid treating an AEC-Q100 device designation as a complete vehicle-level EMC, transient or functional-safety approval.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The automotive AEC-Q100 qualification is identified in the verified product information. RoHS, REACH, lead-free, halogen-free and conflict-minerals statuses require confirmation from the applicable NXP documentation.

Related Searches

tja1041at datasheet nxp tja1041at TJA1041AT/H/V datasheet pdf TJA1041AT/H/V pinout TJA1041AT/H/V equivalent TJA1041AT/H/V replacement TJA1041AT/H/V cross reference TJA1041AT/H/V 1Mbps CAN TJA1041AT/H/V 14-SO package TJA1041AT/H/V automotive CAN TJA1041AT/H/V price TJA1041AT/H/V stock TJA1041AT/H/V vs TJA1042T/3/1J TJA1041AT/H/V sleep standby mode NXP TJA1041AT application circuit

Related Components & Terms

NXP Semiconductors TJA1041AT/H/V TJA1041AT TJA1041A TJA1042T/3/1J Controller Area Network CAN transceiver high-speed CAN CAN interface IC network controller automotive electronics differential signaling CANH CANL TXD RXD standby mode sleep mode AEC-Q100 1 Mbit/s 5 V 14-pin SO package surface-mount package automotive body control module industrial CAN gateway
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details