TLV2322ID - Dual 8V 85kHz CMOS Op Amp | Texas Instruments
MPN: TLV2322ID ✓ AktifTLV2322ID Ringkasan
An operational amplifier is an analog integrated circuit that uses high-gain feedback to amplify the difference between two input voltages. The TLV2322 belongs to the CMOS operational-amplifier family within the broader amplifier IC and signal-processing hierarchy. Two amplifiers in one package reduce board area when a design needs two related signal paths, such as sensing and filtering or filtering and driving.
Key characteristics include an 8 V maximum supply, 85 kHz gain-bandwidth product, and 0.02 V/us slew rate. According to the Texas Instruments TLV2322 product information, the common-mode input range extends below the negative rail and up to the positive supply, while the output range includes negative voltages. These features make the device useful for battery-powered instrumentation, low-voltage sensor interfaces, and general-purpose analog signal conditioning.
The TLV2322ID uses complementary CMOS input and output stages to support low-voltage operation while controlling power consumption. At 85 kHz gain-bandwidth product, the amplifier is intended for moderate-bandwidth tasks rather than high-speed video or precision instrumentation. Its dual-channel configuration also allows each amplifier to be configured independently for noninverting, inverting, filtering, buffering, or comparator-style open-loop use where appropriate.
Typical uses include low-voltage sensor conditioning, portable measurement systems, analog filters, audio and communication interface circuits, and 3 V or 5 V embedded systems. Because the common-mode input range extends beyond the negative rail, the device can process signals approaching ground with a single positive supply, reducing the need for negative rails in many sensor systems.
PCB design should keep input and feedback connections short, place decoupling capacitors close to the supply pins, and maintain adequate copper around the SOIC footprint. Bias currents, output loading, source impedance, and the selected feedback network determine practical accuracy and stability more than nominal bandwidth alone.
This page combines the manufacturer product specifications with application engineering, pinout guidance, comparison criteria, and practical design notes. It is intended to help engineers evaluate the TLV2322ID quickly while preserving the distinctions between bandwidth, slew rate, common-mode range, supply voltage, and pin compatibility.
Alternatif penggantian untuk TLV2322ID — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
TLV2316IDR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
TLV2322ID Rating Maksimal & Karakteristik Listrik
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Channels | 2 channels |
| Supply Voltage Range | 2 V to 8 V |
| Maximum Supply Voltage | 8 V |
| Gain-Bandwidth Product | 85 kHz |
| Slew Rate | 0.02 V/us |
| 3 V Single-Supply Operation | Supported |
| 5 V Single-Supply Operation | Supported |
| Common-Mode Input Range | Extends below the negative rail and up to VDD |
| Rentang Tegangan Output | Includes negative voltages |
| Process Technology | CMOS |
| Paket | 8-pin SOIC (D) |
| Tipe Mounting | Surface mount |
Konfigurasi Pin TLV2322ID
| Pin produk 1 | OUTA — Amplifier A output |
| Pin produk 2 | IN A- — Amplifier A inverting input |
| Pin produk 3 | IN A+ — Amplifier A noninverting input |
| Pin produk 4 | V- — Negative supply connection |
| Pin produk 5 | IN B+ — Amplifier B noninverting input |
| Pin produk 6 | IN B- — Amplifier B inverting input |
| Pin produk 7 | OUTB — Amplifier B output |
| Pin produk 8 | V+ — Positive supply connection |
Aplikasi Umum
TLV2322ID cocok untuk 6 aplikasis: Battery-Powered Sensor Conditioning, Low-Voltage Analog Filtering, Portable Measurement Systems, Single-Supply Audio Interface, Industrial Control Signal Interface, Communication Interface Buffering.
Battery-Powered Sensor Conditioning
The TLV2322ID fits battery-powered sensor interfaces because its 2 V to 8 V supply range covers both 3 V and 5 V systems. The common-mode input range extends below the negative rail and up to VDD, allowing signals near ground to be amplified without adding a negative supply in many designs. Two channels can condition one sensor signal or process complementary outputs. With an 85 kHz gain-bandwidth product and 0.02 V/us slew rate, it is most appropriate for slow sensor signals and low-frequency filters rather than wideband waveform capture.
Low-Voltage Analog Filtering
The TLV2322ID can implement active filters, integrators, and signal-shaping stages in 3 V or 5 V analog systems. Its 85 kHz gain-bandwidth product supports moderate-frequency closed-loop gains, while the dual configuration supports cascaded filter stages without requiring two packages. The common-mode input range extending below the negative rail simplifies filters centered on small sensor signals. Designers should still account for the 0.02 V/us slew rate, output swing, source impedance, and the frequency-dependent noise gain when setting component values.
Portable Measurement Systems
Portable measurement systems benefit from the TLV2322ID because it combines two amplifiers with operation from 2 V to 8 V. One channel may buffer a sensor while the second provides gain or active filtering, reducing board area in compact instruments. The low-voltage CMOS design is suited to battery-powered products operating from 3 V or 5 V rails. Because the 85 kHz gain-bandwidth product is modest, the device is best used for slowly changing measurements where offset, bias current, and output settling are more important than high-speed conversion accuracy.
Single-Supply Audio Interface
The TLV2322ID can support low-level audio and communication interfaces built around a single positive supply. Its common-mode range below the negative rail permits processing ground-centered signals, and the output range includes negative voltages. Two channels can handle left and right paths or a filter and driver stage. The 85 kHz gain-bandwidth product and 0.02 V/us slew rate are suitable for modest audio-band conditioning, while designers should verify output swing into the intended load and avoid using this amplifier as a high-power output-stage driver.
Industrial Control Signal Interface
The TLV2322ID is suitable for low-level industrial control signals that require conditioning within a compact 8-pin SOIC footprint. Its 2 V to 8 V supply capability supports multiple embedded rails, and the common-mode range approaching VDD can simplify conditioning of controller-level signals. The dual amplifier arrangement can process a command and a feedback signal independently. For factory equipment, verify the qualified temperature range, transient tolerance, noise performance, and system-level isolation requirements before approving the device for production.
Communication Interface Buffering
The TLV2322ID can buffer or condition slow communication and logic-interface signals in equipment operating from 3 V or 5 V. Its extended common-mode input range is useful when logic levels sit near the lower supply rail, and the dual channels can support complementary signals or separate transmit and receive conditioning paths. The 85 kHz gain-bandwidth product is adequate for many low-rate control interfaces but not for high-speed differential links. Confirm the source impedance, capacitive loading, settling requirements, and logic thresholds before selecting the amplifier.
Data referensi engineering untuk TLV2322ID — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | TLV2316IDR |
|---|---|---|
| Package | 8-pin SOIC (D) | 8-pin SOIC (D) - confirm exact suffix pinout |
| Brand | Texas Instruments | Texas Instruments |
Diferensiator Kunci
- Two amplifiers share one compact 8-pin SOIC package (vsTLV2316IDR)
- Supports low-voltage single-supply designs (vsTLV2316IDR)
- Ground-referenced input capability (vsTLV2316IDR)
Catatan Desain
Place the supply-decoupling capacitor close to pins 8 and 4, and route the capacitor current loop without passing through the area used by input and feedback traces. Keep the two amplifier channels physically separate where one channel handles a high-level signal and the other a sensitive low-level signal. The SOIC footprint leaves enough room for short feedback components, but excessive input-loop area can increase noise pickup and susceptibility to oscillation.
Do not equate the 85 kHz gain-bandwidth product with the usable closed-loop bandwidth at every gain. The actual response depends on noise gain, and the 0.02 V/us slew rate limits large-signal transitions. Check the selected feedback resistors against the recommended bias-current and noise-gain constraints. For source impedances above several hundred kilohms, add a dedicated bias-current compensation resistor if the application permits it.
The common-mode input range extending below the negative rail is useful for ground-referenced sensor signals, but it does not guarantee unlimited output swing near either rail. Verify the required output voltage against the load current and supply voltage using the manufacturer output-swing characterization. For capacitive loads, place a small isolation resistor between the amplifier output and the load to reduce the risk of instability.
Informasi Konformitas
Request the current manufacturer declarations and product-specific compliance documents for the TLV2322ID orderable variant.